Re: [PATCH v3 2/2] PCI: mediatek-gen3: Add power and reset control feature for downstream component

[AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>]

Il 09/10/23 10:49, Jian Yang ha scritto:
> From: "jian.yang" <jian.yang@mediatek.com>
> 
> Make MediaTek's controller driver capable of controlling power
> supplies and reset pin of a downstream component in power-on and
> power-off flow.
> 
> Some downstream components (e.g., a WIFI chip) may need an extra
> reset other than PERST# and their power supplies, depending on
> the requirements of platform, may need to controlled by their
> parent's driver. To meet the requirements described above, I add this
> feature to MediaTek's PCIe controller driver as a optional feature.
> 
> Signed-off-by: jian.yang <jian.yang@mediatek.com>
> ---
>   drivers/pci/controller/pcie-mediatek-gen3.c | 93 ++++++++++++++++++++-
>   1 file changed, 92 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> index e0e27645fdf4..ad4b25c34f5d 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -8,6 +8,7 @@
>   
>   #include <linux/clk.h>
>   #include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
>   #include <linux/iopoll.h>
>   #include <linux/irq.h>
>   #include <linux/irqchip/chained_irq.h>
> @@ -20,6 +21,8 @@
>   #include <linux/platform_device.h>
>   #include <linux/pm_domain.h>
>   #include <linux/pm_runtime.h>
> +#include <linux/pm_wakeup.h>
> +#include <linux/regulator/consumer.h>
>   #include <linux/reset.h>
>   
>   #include "../pci.h"
> @@ -100,6 +103,13 @@
>   #define PCIE_ATR_TLP_TYPE_MEM		PCIE_ATR_TLP_TYPE(0)
>   #define PCIE_ATR_TLP_TYPE_IO		PCIE_ATR_TLP_TYPE(2)
>   
> +/* Downstream Component power supplies used by MediaTek PCIe */
> +static const char *const dsc_power_supplies[] = {
> +	"pcie1v8",
> +	"pcie3v3",
> +	"pcie12v",
> +};

Please....

static const char *const dsc_power_supplies[] = {
	"vpcie1v8",
	"vpcie3v3",
	"vpcie12v",
};

> +
>   /**
>    * struct mtk_msi_set - MSI information for each set
>    * @base: IO mapped register base
> @@ -122,6 +132,9 @@ struct mtk_msi_set {
>    * @phy: PHY controller block
>    * @clks: PCIe clocks
>    * @num_clks: PCIe clocks count for this port
> + * @supplies: Downstream Component power supplies
> + * @num_supplies: Downstream Component power supplies count
> + * @dsc_reset: The GPIO pin to reset Downstream component
>    * @irq: PCIe controller interrupt number
>    * @saved_irq_state: IRQ enable state saved at suspend time
>    * @irq_lock: lock protecting IRQ register access
> @@ -141,6 +154,9 @@ struct mtk_gen3_pcie {
>   	struct phy *phy;
>   	struct clk_bulk_data *clks;
>   	int num_clks;
> +	struct regulator_bulk_data *supplies;
> +	int num_supplies;
> +	struct gpio_desc *dsc_reset;
>   
>   	int irq;
>   	u32 saved_irq_state;
> @@ -763,7 +779,7 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
>   	struct device *dev = pcie->dev;
>   	struct platform_device *pdev = to_platform_device(dev);
>   	struct resource *regs;
> -	int ret;
> +	int ret, i;

Since you anyway have to send a v4, can you please also order these by name?

int i, ret;

>   
>   	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcie-mac");
>   	if (!regs)
> @@ -809,14 +825,86 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
>   		return pcie->num_clks;
>   	}
>   
> +	pcie->num_supplies = ARRAY_SIZE(dsc_power_supplies);
> +	pcie->supplies = devm_kcalloc(dev, pcie->num_supplies,
> +				      sizeof(*pcie->supplies),
> +				      GFP_KERNEL);
> +	if (!pcie->supplies)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < pcie->num_supplies; i++)
> +		pcie->supplies[i].supply = dsc_power_supplies[i];
> +
> +	ret = devm_regulator_bulk_get(dev, pcie->num_supplies, pcie->supplies);
> +	if (ret)
> +		return ret;
> +
> +	pcie->dsc_reset = devm_gpiod_get_optional(dev, "dsc-reset",
> +						  GPIOD_OUT_LOW);
> +	if (IS_ERR(pcie->dsc_reset)) {
> +		ret = PTR_ERR(pcie->dsc_reset);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "failed to request DSC reset gpio\n");

dev_err_probe() does exactly what you're doing here, but it's shorter :-)

> +
> +		return ret;
> +	}
> +
>   	return 0;
>   }
>   
> +static int mtk_pcie_dsc_power_up(struct mtk_gen3_pcie *pcie)
> +{
> +	struct device *dev = pcie->dev;
> +	int ret;
> +
> +	/*
> +	 * Skip downstream component's power-up flow if it was kept power-on

* Skip powering up the downstream component if it was kept powered on


> +	 * while system entered suspend state
> +	 */
> +	if (device_wakeup_path(dev))
> +		return 0;
> +
> +	/* Assert Downstream Component reset */
> +	if (pcie->dsc_reset)
> +		gpiod_set_value_cansleep(pcie->dsc_reset, 1);
> +
> +	ret = regulator_bulk_enable(pcie->num_supplies, pcie->supplies);
> +	if (ret)
> +		dev_err(dev, "failed to enable DSC power supplies: %d\n", ret);
> +
> +	/* De-assert Downstream Component reset */
> +	if (pcie->dsc_reset)
> +		gpiod_set_value_cansleep(pcie->dsc_reset, 0);
> +
> +	return ret;
> +}
> +
> +static void mtk_pcie_dsc_power_down(struct mtk_gen3_pcie *pcie)
> +{
> +	/*
> +	 * Keep downstream component power-on if it need to wake up the

* Keep downstream component powered on if it is capable of waking up
* the system from suspend

> +	 * system in suspend state
> +	 */
> +	if (device_wakeup_path(pcie->dev))
> +		return;
> +
> +	/* Assert Downstream Component reset */
> +	if (pcie->dsc_reset)
> +		gpiod_set_value_cansleep(pcie->dsc_reset, 1);
> +
> +	regulator_bulk_disable(pcie->num_supplies, pcie->supplies);
> +}
> +

Regards,
Angelo