All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wadim Egorov <w.egorov@phytec.de>
To: Nathan Morrisson <nmorrisson@phytec.com>, <nm@ti.com>,
	<vigneshr@ti.com>, <kristo@kernel.org>, <robh@kernel.org>,
	<krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<upstream@lists.phytec.de>
Subject: Re: [PATCH v2 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards
Date: Fri, 31 May 2024 10:56:15 +0200	[thread overview]
Message-ID: <bc928849-7026-47b5-9160-908bfc6daecf@phytec.de> (raw)
In-Reply-To: <20240528225137.3629698-1-nmorrisson@phytec.com>



Am 29.05.24 um 00:51 schrieb Nathan Morrisson:
> Add three overlays to disable the eth phy, rtc, and spi nor. These
> overlays will be used to disable device tree nodes for components
> that are optionally not populated.
> 
> v2:
>    - Add build time tests in makefile

For the whole series,

Reviewed-by: Wadim Egorov <w.egorov@phytec.de>

> 
> Nathan Morrisson (4):
>    arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disabl spi nor
> 
>   arch/arm64/boot/dts/ti/Makefile               | 17 +++++++++++++++++
>   .../boot/dts/ti/k3-am64-phycore-som.dtsi      |  2 +-
>   .../ti/k3-am6xx-phycore-disable-eth-phy.dtso  | 19 +++++++++++++++++++
>   .../dts/ti/k3-am6xx-phycore-disable-rtc.dtso  | 15 +++++++++++++++
>   .../ti/k3-am6xx-phycore-disable-spi-nor.dtso  | 15 +++++++++++++++
>   5 files changed, 67 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Wadim Egorov <w.egorov@phytec.de>
To: Nathan Morrisson <nmorrisson@phytec.com>, <nm@ti.com>,
	<vigneshr@ti.com>, <kristo@kernel.org>, <robh@kernel.org>,
	<krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<upstream@lists.phytec.de>
Subject: Re: [PATCH v2 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards
Date: Fri, 31 May 2024 10:56:15 +0200	[thread overview]
Message-ID: <bc928849-7026-47b5-9160-908bfc6daecf@phytec.de> (raw)
In-Reply-To: <20240528225137.3629698-1-nmorrisson@phytec.com>



Am 29.05.24 um 00:51 schrieb Nathan Morrisson:
> Add three overlays to disable the eth phy, rtc, and spi nor. These
> overlays will be used to disable device tree nodes for components
> that are optionally not populated.
> 
> v2:
>    - Add build time tests in makefile

For the whole series,

Reviewed-by: Wadim Egorov <w.egorov@phytec.de>

> 
> Nathan Morrisson (4):
>    arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc
>    arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disabl spi nor
> 
>   arch/arm64/boot/dts/ti/Makefile               | 17 +++++++++++++++++
>   .../boot/dts/ti/k3-am64-phycore-som.dtsi      |  2 +-
>   .../ti/k3-am6xx-phycore-disable-eth-phy.dtso  | 19 +++++++++++++++++++
>   .../dts/ti/k3-am6xx-phycore-disable-rtc.dtso  | 15 +++++++++++++++
>   .../ti/k3-am6xx-phycore-disable-spi-nor.dtso  | 15 +++++++++++++++
>   5 files changed, 67 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso
> 

  parent reply	other threads:[~2024-05-31  8:56 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-28 22:51 [PATCH v2 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards Nathan Morrisson
2024-05-28 22:51 ` Nathan Morrisson
2024-05-28 22:51 ` [PATCH v2 1/4] arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label Nathan Morrisson
2024-05-28 22:51   ` Nathan Morrisson
2024-05-31  8:28   ` Wadim Egorov
2024-05-31  8:28     ` Wadim Egorov
2024-05-31  8:53     ` Krzysztof Kozlowski
2024-05-31  8:53       ` Krzysztof Kozlowski
2024-05-31  8:57       ` Wadim Egorov
2024-05-31  8:57         ` Wadim Egorov
2024-05-28 22:51 ` [PATCH v2 2/4] arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy Nathan Morrisson
2024-05-28 22:51   ` Nathan Morrisson
2024-05-28 22:51 ` [PATCH v2 3/4] arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc Nathan Morrisson
2024-05-28 22:51   ` Nathan Morrisson
2024-05-28 22:51 ` [PATCH v2 4/4] arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disabl spi nor Nathan Morrisson
2024-05-28 22:51   ` Nathan Morrisson
2024-05-31  8:56 ` Wadim Egorov [this message]
2024-05-31  8:56   ` [PATCH v2 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards Wadim Egorov
2024-06-03 17:41 ` Vignesh Raghavendra
2024-06-03 17:41   ` Vignesh Raghavendra
2024-06-04 23:15   ` Nathan Morrisson
2024-06-04 23:15     ` Nathan Morrisson
2024-06-12 10:19     ` Vignesh Raghavendra
2024-06-13 23:07       ` Nathan Morrisson
2024-06-10  8:07   ` Wadim Egorov
2024-06-10  8:07     ` Wadim Egorov
2024-06-11 13:11     ` Daniel Schultz
2024-06-11 13:11       ` Daniel Schultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bc928849-7026-47b5-9160-908bfc6daecf@phytec.de \
    --to=w.egorov@phytec.de \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=nmorrisson@phytec.com \
    --cc=robh@kernel.org \
    --cc=upstream@lists.phytec.de \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.