All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugzilla-daemon@bugzilla.kernel.org
To: linux-scsi@vger.kernel.org
Subject: [Bug 111441] iscsi fails to attach to targets
Date: Fri, 29 Jan 2016 03:32:41 +0000	[thread overview]
Message-ID: <bug-111441-11613-YJB4zFCAjW@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-111441-11613@https.bugzilla.kernel.org/>

https://bugzilla.kernel.org/show_bug.cgi?id=111441

--- Comment #3 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Additional tracebacks:

[   25.799382] WARNING: CPU: 18 PID: 1482 at block/genhd.c:626
add_disk+0x443/0x4a0()
[   25.799383] Modules linked in: iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma
ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt
target_core_mod openvswitch bonding ib_srp scsi_transport_srp ib_ipoib
nf_defrag_ipv6 rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa
ib_mad usnic_verbs ib_core xt_comment xt_multiport iptable_filter ib_addr
iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 x86_pkg_temp_thermal nf_nat_ipv4
intel_powerclamp nf_nat coretemp kvm_intel nf_conntrack kvm iptable_mangle
irqbypass crct10dif_pclmul crc32_pclmul nfsd aesni_intel lrw gf128mul
glue_helper ablk_helper cryptd ses enclosure sb_edac sg auth_rpcgss edac_core
iTCO_wdt ipmi_devintf iTCO_vendor_support nfs_acl lockd shpchp pcspkr lpc_ich
ipmi_si ipmi_msghandler mfd_core wmi acpi_power_meter grace
[   25.799435]  sunrpc br_netfilter bridge stp llc dm_multipath ip_tables xfs
libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt
fb_sys_fops ttm ixgbe(O) drm fnic i40e libfcoe igb megaraid_sas enic libfc
crc32c_intel vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit
dca i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod
[   25.799462] CPU: 18 PID: 1482 Comm: kworker/u82:3 Tainted: G           O   
4.4.0 #1
[   25.799464] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[   25.799470] Workqueue: events_unbound async_run_entry_fn
[   25.799473]  0000000000000000 00000000866f6387 ffff885f9d34bcf8
ffffffff81329090
[   25.799476]  0000000000000000 ffff885f9d34bd30 ffffffff810862c6
ffff885e6c3a8800
[   25.799478]  ffff885e6c3a8880 ffff885f9c59ea80 ffff885e6c3a880c
ffff885e6bc78000
[   25.799481] Call Trace:
[   25.799492]  [<ffffffff81329090>] dump_stack+0x44/0x64
[   25.799496]  [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[   25.799499]  [<ffffffff8108640a>] warn_slowpath_null+0x1a/0x20
[   25.799502]  [<ffffffff8130ef23>] add_disk+0x443/0x4a0
[   25.799508]  [<ffffffffa0086a35>] sd_probe_async+0x115/0x1d0 [sd_mod]
[   25.799511]  [<ffffffff810a70fa>] async_run_entry_fn+0x4a/0x140
[   25.799515]  [<ffffffff8109e09c>] process_one_work+0x14c/0x3c0
[   25.799517]  [<ffffffff8109e8d4>] worker_thread+0x114/0x470
[   25.799520]  [<ffffffff8109e7c0>] ? rescuer_thread+0x310/0x310
[   25.799524]  [<ffffffff810a43d8>] kthread+0xd8/0xf0
[   25.799527]  [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[   25.799532]  [<ffffffff8169490f>] ret_from_fork+0x3f/0x70
[   25.799535]  [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[   25.799538] ---[ end trace 5d59079faf7d2510 ]---
[   25.799568] sd 3:0:0:2: [sdc] Attached SCSI disk
[   25.808827] scsi 3:0:0:0: Unexpected response from lun 2 while scanning,
scan aborted
[   25.810073] scsi host6: iSCSI Initiator over TCP/IP
[   25.811250] scsi 4:0:0:3: Direct-Access     LIO-ORG  san-disk-3       4.0 
PQ: 0 ANSI: 5
[   25.811776] sd 4:0:0:3: alua: supports implicit and explicit TPGS
[   25.811914] sd 4:0:0:3: [sdd] 9765625856 512-byte logical blocks: (5.00
TB/4.54 TiB)
[   25.811958] sd 4:0:0:3: alua: No target port descriptors found
[   25.811961] sd 4:0:0:3: alua: Attach failed (-22)
[   25.811964] sd 4:0:0:3: failed to add device handler: -22
[   25.812001] sd 4:0:0:3: [sdd] Write Protect is off
[   25.812005] sd 4:0:0:3: [sdd] Mode Sense: 00 00 00 00
[   25.812009] sd 4:0:0:3: [sdd] Asking for cache data failed
[   25.812011] sd 4:0:0:3: [sdd] Assuming drive cache: write through
[   25.815398] sd 4:0:0:3: [sdd] Attached SCSI disk
[   25.819131] ixgbe 0000:04:00.1: SR-IOV enabled with 8 VFs
[   25.819134] ixgbe 0000:04:00.1: configure port vlans to keep your VFs secure
[   25.824709] scsi 4:0:0:0: Unexpected response from lun 3 while scanning,
scan aborted
[   25.832694] scsi 6:0:0:4: Direct-Access     LIO-ORG  san-disk-4       4.0 
PQ: 0 ANSI: 5
[   25.832921] scsi 5:0:0:1: Direct-Access     LIO-ORG  san-disk-1       4.0 
PQ: 0 ANSI: 5
[   25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
[   25.833360] sd 6:0:0:4: alua: No target port descriptors found
[   25.833363] sd 6:0:0:4: alua: Attach failed (-22)
[   25.833365] sd 6:0:0:4: failed to add device handler: -22
[   25.833394] sd 5:0:0:1: alua: supports implicit and explicit TPGS
[   25.851814] sd 6:0:0:4: [sde] 10742171648 512-byte logical blocks: (5.49
TB/5.00 TiB)
[   25.851820] sd 5:0:0:1: [sdf] 7812499389 512-byte logical blocks: (3.99
TB/3.63 TiB)
[   25.851821] sd 6:0:0:4: [sde] Write Protect is off
[   25.851823] sd 6:0:0:4: [sde] Mode Sense: 00 00 00 00
[   25.851825] sd 6:0:0:4: [sde] Asking for cache data failed
[   25.851827] sd 6:0:0:4: [sde] Assuming drive cache: write through
[   25.851843] sd 5:0:0:1: alua: No target port descriptors found
[   25.851847] sd 5:0:0:1: alua: Attach failed (-22)
[   25.851849] sd 5:0:0:1: failed to add device handler: -22
[   25.851946] sd 5:0:0:1: [sdf] Write Protect is off
[   25.851948] sd 5:0:0:1: [sdf] Mode Sense: 00 00 00 00
[   25.851949] sd 5:0:0:1: [sdf] Asking for cache data failed
[   25.851951] sd 5:0:0:1: [sdf] Assuming drive cache: write through
[   25.852160] sd 6:0:0:4: [sde] Attached SCSI disk
[   25.852172] sd 5:0:0:1: [sdf] Attached SCSI disk
[   25.854892] scsi 6:0:0:0: Unexpected response from lun 4 while scanning,
scan aborted
[   25.862806] scsi 5:0:0:0: Unexpected response from lun 1 while scanning,
scan aborted
[   25.890721] ixgbe 0000:04:00.0 enp4s0f0: detected SFP+: 7
[   25.919701] pci 0000:04:10.1: [8086:10ed] type 00 class 0x020000
[   25.919738] pci 0000:04:10.1: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[   25.919863] iommu: Adding device 0000:04:10.1 to group 88
[   25.919920] pci 0000:04:10.3: [8086:10ed] type 00 class 0x020000
[   25.919951] pci 0000:04:10.3: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[   25.920013] iommu: Adding device 0000:04:10.3 to group 89
[   25.920039] pci 0000:04:10.5: [8086:10ed] type 00 class 0x020000
[   25.920069] pci 0000:04:10.5: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[   25.920127] iommu: Adding device 0000:04:10.5 to group 90
[   25.920151] pci 0000:04:10.7: [8086:10ed] type 00 class 0x020000
[   25.920182] pci 0000:04:10.7: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[   25.920239] iommu: Adding device 0000:04:10.7 to group 91
[   25.920263] pci 0000:04:11.1: [8086:10ed] type 00 class 0x020000
[   25.920293] pci 0000:04:11.1: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[   25.920349] iommu: Adding device 0000:04:11.1 to group 92
[   25.920373] pci 0000:04:11.3: [8086:10ed] type 00 class 0x020000
[   25.920403] pci 0000:04:11.3: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[   25.920459] iommu: Adding device 0000:04:11.3 to group 93
[   25.920485] pci 0000:04:11.5: [8086:10ed] type 00 class 0x020000
[   25.920515] pci 0000:04:11.5: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[   25.920570] iommu: Adding device 0000:04:11.5 to group 94
[   25.920594] pci 0000:04:11.7: [8086:10ed] type 00 class 0x020000
[   25.920624] pci 0000:04:11.7: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[   25.920698] iommu: Adding device 0000:04:11.7 to group 95
[   25.921365] ixgbe 0000:04:00.1: removed PHC on enp4s0f1
[   26.020448] ixgbe 0000:04:00.1: registered PHC device on enp4s0f1
[   26.185674] ixgbe 0000:04:00.1 enp4s0f1: detected SFP+: 4
[   26.380954] i40e 0000:06:00.0 enp6s0f0: adding 68:05:ca:37:26:90 vid=0
[   26.392266] i40e 0000:06:00.0: Allocating 8 VFs.
[   26.492733] pci 0000:06:02.0: [8086:154c] type 00 class 0x020000
[   26.492785] pci 0000:06:02.0: Max Payload Size set to 256 (was 128, max
2048)
[   26.493016] iommu: Adding device 0000:06:02.0 to group 96
[   26.493114] pci 0000:06:02.1: [8086:154c] type 00 class 0x020000
[   26.493159] pci 0000:06:02.1: Max Payload Size set to 256 (was 128, max
2048)
[   26.493259] iommu: Adding device 0000:06:02.1 to group 97
[   26.493309] pci 0000:06:02.2: [8086:154c] type 00 class 0x020000
[   26.493352] pci 0000:06:02.2: Max Payload Size set to 256 (was 128, max
2048)
[   26.493452] iommu: Adding device 0000:06:02.2 to group 98
[   26.493501] pci 0000:06:02.3: [8086:154c] type 00 class 0x020000
[   26.493545] pci 0000:06:02.3: Max Payload Size set to 256 (was 128, max
2048)
[   26.493655] iommu: Adding device 0000:06:02.3 to group 99
[   26.493707] pci 0000:06:02.4: [8086:154c] type 00 class 0x020000
[   26.493751] pci 0000:06:02.4: Max Payload Size set to 256 (was 128, max
2048)
[   26.493856] iommu: Adding device 0000:06:02.4 to group 100
[   26.493902] pci 0000:06:02.5: [8086:154c] type 00 class 0x020000
[   26.493945] pci 0000:06:02.5: Max Payload Size set to 256 (was 128, max
2048)
[   26.494046] iommu: Adding device 0000:06:02.5 to group 101
[   26.494103] pci 0000:06:02.6: [8086:154c] type 00 class 0x020000
[   26.494147] pci 0000:06:02.6: Max Payload Size set to 256 (was 128, max
2048)
[   26.494247] iommu: Adding device 0000:06:02.6 to group 102
[   26.494295] pci 0000:06:02.7: [8086:154c] type 00 class 0x020000
[   26.494339] pci 0000:06:02.7: Max Payload Size set to 256 (was 128, max
2048)
[   26.494446] iommu: Adding device 0000:06:02.7 to group 103
[   26.977585] i40e 0000:06:00.1 enp6s0f1: adding 68:05:ca:37:26:91 vid=0
[   26.985175] i40e 0000:06:00.1: Allocating 8 VFs.
[   27.085659] pci 0000:06:0a.0: [8086:154c] type 00 class 0x020000
[   27.085704] pci 0000:06:0a.0: Max Payload Size set to 256 (was 128, max
2048)
[   27.085868] iommu: Adding device 0000:06:0a.0 to group 104
[   27.085938] pci 0000:06:0a.1: [8086:154c] type 00 class 0x020000
[   27.085977] pci 0000:06:0a.1: Max Payload Size set to 256 (was 128, max
2048)
[   27.086047] iommu: Adding device 0000:06:0a.1 to group 105
[   27.086076] pci 0000:06:0a.2: [8086:154c] type 00 class 0x020000
[   27.086114] pci 0000:06:0a.2: Max Payload Size set to 256 (was 128, max
2048)
[   27.086184] iommu: Adding device 0000:06:0a.2 to group 106
[   27.086213] pci 0000:06:0a.3: [8086:154c] type 00 class 0x020000
[   27.086251] pci 0000:06:0a.3: Max Payload Size set to 256 (was 128, max
2048)
[   27.086321] iommu: Adding device 0000:06:0a.3 to group 107
[   27.086349] pci 0000:06:0a.4: [8086:154c] type 00 class 0x020000
[   27.086386] pci 0000:06:0a.4: Max Payload Size set to 256 (was 128, max
2048)
[   27.086454] iommu: Adding device 0000:06:0a.4 to group 108
[   27.086485] pci 0000:06:0a.5: [8086:154c] type 00 class 0x020000
[   27.086533] pci 0000:06:0a.5: Max Payload Size set to 256 (was 128, max
2048)
[   27.086637] iommu: Adding device 0000:06:0a.5 to group 109
[   27.086674] pci 0000:06:0a.6: [8086:154c] type 00 class 0x020000
[   27.086732] pci 0000:06:0a.6: Max Payload Size set to 256 (was 128, max
2048)
[   27.086829] iommu: Adding device 0000:06:0a.6 to group 110
[   27.086860] pci 0000:06:0a.7: [8086:154c] type 00 class 0x020000
[   27.086908] pci 0000:06:0a.7: Max Payload Size set to 256 (was 128, max
2048)
[   27.087045] iommu: Adding device 0000:06:0a.7 to group 111
[   27.266965] device qg-3e44de10-3d left promiscuous mode
[   27.313043] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   27.545545] i40e 0000:83:00.0 enp131s0f0: adding 68:05:ca:3a:a3:60 vid=0
[   27.558666] i40e 0000:83:00.0: Allocating 8 VFs.
[   27.639645] device qr-912a3637-a9 left promiscuous mode
[   27.659650] pci 0000:83:02.0: [8086:154c] type 00 class 0x020000
[   27.659698] pci 0000:83:02.0: Max Payload Size set to 256 (was 128, max
2048)
[   27.659919] iommu: Adding device 0000:83:02.0 to group 112
[   27.660016] pci 0000:83:02.1: [8086:154c] type 00 class 0x020000
[   27.660055] pci 0000:83:02.1: Max Payload Size set to 256 (was 128, max
2048)
[   27.660146] iommu: Adding device 0000:83:02.1 to group 113
[   27.660191] pci 0000:83:02.2: [8086:154c] type 00 class 0x020000
[   27.660230] pci 0000:83:02.2: Max Payload Size set to 256 (was 128, max
2048)
[   27.660327] iommu: Adding device 0000:83:02.2 to group 114
[   27.660410] pci 0000:83:02.3: [8086:154c] type 00 class 0x020000
[   27.660449] pci 0000:83:02.3: Max Payload Size set to 256 (was 128, max
2048)
[   27.660537] iommu: Adding device 0000:83:02.3 to group 115
[   27.660584] pci 0000:83:02.4: [8086:154c] type 00 class 0x020000
[   27.660634] pci 0000:83:02.4: Max Payload Size set to 256 (was 128, max
2048)
[   27.660725] iommu: Adding device 0000:83:02.4 to group 116
[   27.660771] pci 0000:83:02.5: [8086:154c] type 00 class 0x020000
[   27.660809] pci 0000:83:02.5: Max Payload Size set to 256 (was 128, max
2048)
[   27.660901] iommu: Adding device 0000:83:02.5 to group 117
[   27.660950] pci 0000:83:02.6: [8086:154c] type 00 class 0x020000
[   27.660989] pci 0000:83:02.6: Max Payload Size set to 256 (was 128, max
2048)
[   27.661078] iommu: Adding device 0000:83:02.6 to group 118
[   27.661121] pci 0000:83:02.7: [8086:154c] type 00 class 0x020000
[   27.661160] pci 0000:83:02.7: Max Payload Size set to 256 (was 128, max
2048)
[   27.661246] iommu: Adding device 0000:83:02.7 to group 119
[   27.695063] Ebtables v2.0 registered
[   28.075814] i40e 0000:83:00.1 enp131s0f1: adding 68:05:ca:3a:a3:61 vid=0
[   28.086628] i40e 0000:83:00.1: Allocating 8 VFs.
[   28.108753] device qr-9cc0be6f-14 left promiscuous mode
[   28.187599] pci 0000:83:0a.0: [8086:154c] type 00 class 0x020000
[   28.187641] pci 0000:83:0a.0: Max Payload Size set to 256 (was 128, max
2048)
[   28.187813] iommu: Adding device 0000:83:0a.0 to group 120
[   28.187885] pci 0000:83:0a.1: [8086:154c] type 00 class 0x020000
[   28.187921] pci 0000:83:0a.1: Max Payload Size set to 256 (was 128, max
2048)
[   28.187993] iommu: Adding device 0000:83:0a.1 to group 121
[   28.188028] pci 0000:83:0a.2: [8086:154c] type 00 class 0x020000
[   28.188064] pci 0000:83:0a.2: Max Payload Size set to 256 (was 128, max
2048)
[   28.188136] iommu: Adding device 0000:83:0a.2 to group 122
[   28.188169] pci 0000:83:0a.3: [8086:154c] type 00 class 0x020000
[   28.188205] pci 0000:83:0a.3: Max Payload Size set to 256 (was 128, max
2048)
[   28.188272] iommu: Adding device 0000:83:0a.3 to group 123
[   28.188305] pci 0000:83:0a.4: [8086:154c] type 00 class 0x020000
[   28.188340] pci 0000:83:0a.4: Max Payload Size set to 256 (was 128, max
2048)
[   28.188425] iommu: Adding device 0000:83:0a.4 to group 124
[   28.188468] pci 0000:83:0a.5: [8086:154c] type 00 class 0x020000
[   28.188503] pci 0000:83:0a.5: Max Payload Size set to 256 (was 128, max
2048)
[   28.188620] iommu: Adding device 0000:83:0a.5 to group 125
[   28.188659] pci 0000:83:0a.6: [8086:154c] type 00 class 0x020000
[   28.188694] pci 0000:83:0a.6: Max Payload Size set to 256 (was 128, max
2048)
[   28.188838] iommu: Adding device 0000:83:0a.6 to group 126
[   28.188887] pci 0000:83:0a.7: [8086:154c] type 00 class 0x020000
[   28.188922] pci 0000:83:0a.7: Max Payload Size set to 256 (was 128, max
2048)
[   28.189083] iommu: Adding device 0000:83:0a.7 to group 127
[   28.282306] device qr-e1f33440-0c left promiscuous mode
[   28.360312] device tap502560f9-d8 left promiscuous mode
[   28.396800] device tap9b0fa827-27 left promiscuous mode
[   28.472534] device tapd10cc73d-3b left promiscuous mode
[   29.801012] ixgbe 0000:04:00.0 enp4s0f0: NIC Link is Up 10 Gbps, Flow
Control: RX/TX
[   41.221646] IPv6: ADDRCONF(NETDEV_UP): qvb7f4dce60-91: link is not ready
[   41.308303] device qvb7f4dce60-91 entered promiscuous mode
[   41.416683] IPv6: ADDRCONF(NETDEV_CHANGE): qvb7f4dce60-91: link becomes
ready
[   41.506396] device qvo7f4dce60-91 entered promiscuous mode
[   41.655044] qbr7f4dce60-91: port 1(qvb7f4dce60-91) entered forwarding state
[   41.655051] qbr7f4dce60-91: port 1(qvb7f4dce60-91) entered forwarding state
[   42.000932] Netfilter messages via NETLINK v0.30.
[   42.014636] ip_set: protocol 6
[   89.625075] device tap9b0fa827-27 entered promiscuous mode
[   89.633839] device tap502560f9-d8 entered promiscuous mode
[   89.635991] device tapd10cc73d-3b entered promiscuous mode
[   89.877049] device qr-912a3637-a9 entered promiscuous mode
[   90.138414] device qr-9cc0be6f-14 entered promiscuous mode
[   90.414338] device qr-e1f33440-0c entered promiscuous mode
[   90.702716] device qg-3e44de10-3d entered promiscuous mode
[  980.670259] Unable to load target_core_user
[  994.343776] scsi host7: iSCSI Initiator over TCP/IP
[  994.361276] scsi 7:0:0:0: Direct-Access     LIO-ORG  IBLOCK           4.0 
PQ: 0 ANSI: 5
[  994.361705] sd 7:0:0:0: alua: supports implicit and explicit TPGS
[  994.361794] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match
SCSI CDB Length: 8 for SAM Opcode: 0x12
[  994.361830] sd 7:0:0:0: alua: No target port descriptors found
[  994.361833] sd 7:0:0:0: alua: Attach failed (-22)
[  994.361862] sd 7:0:0:0: [sdg] 115343360 512-byte logical blocks: (59.0
GB/55.0 GiB)
[  994.361868] sd 7:0:0:0: failed to add device handler: -22
[  994.361911] sd 7:0:0:0: [sdg] Write Protect is off
[  994.361914] sd 7:0:0:0: [sdg] Mode Sense: 00 00 00 00
[  994.361916] sd 7:0:0:0: [sdg] Asking for cache data failed
[  994.361937] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[  994.363181] sd 7:0:0:0: [sdg] Attached SCSI disk
[  994.506461] scsi 7:0:0:0: Direct-Access     LIO-ORG  IBLOCK           4.0 
PQ: 0 ANSI: 5
[  994.506822] ------------[ cut here ]------------
[  994.506828] WARNING: CPU: 1 PID: 10460 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[  994.506829] sysfs: cannot create duplicate filename
'/bus/scsi/devices/7:0:0:0'
[  994.506830] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod
openvswitch bonding ib_srp scsi_transport_srp ib_ipoib nf_defrag_ipv6 rdma_ucm
ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad usnic_verbs ib_core
xt_comment xt_multiport iptable_filter ib_addr iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 x86_pkg_temp_thermal nf_nat_ipv4 intel_powerclamp nf_nat
coretemp kvm_intel nf_conntrack kvm iptable_mangle irqbypass crct10dif_pclmul
[  994.506873]  crc32_pclmul nfsd aesni_intel lrw gf128mul glue_helper
ablk_helper cryptd ses enclosure sb_edac sg auth_rpcgss edac_core iTCO_wdt
ipmi_devintf iTCO_vendor_support nfs_acl lockd shpchp pcspkr lpc_ich ipmi_si
ipmi_msghandler mfd_core wmi acpi_power_meter grace sunrpc br_netfilter bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ixgbe(O) drm fnic i40e
libfcoe igb megaraid_sas enic libfc crc32c_intel vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit dca i2c_core pps_core dm_mirror
dm_region_hash dm_log dm_mod
[  994.506906] CPU: 1 PID: 10460 Comm: iscsiadm Tainted: G        W  O    4.4.0
#1
[  994.506907] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[  994.506909]  0000000000000000 00000000c99ac6bd ffff882d19f07948
ffffffff81329090
[  994.506910]  ffff882d19f07990 ffff882d19f07980 ffffffff810862c6
ffff882d4b39d000
[  994.506912]  ffff882fa039c858 ffff882fa50dee10 0000000000000001
ffffffffffffffef
[  994.506914] Call Trace:
[  994.506920]  [<ffffffff81329090>] dump_stack+0x44/0x64
[  994.506931]  [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[  994.506932]  [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[  994.506936]  [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[  994.506937]  [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[  994.506939]  [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[  994.506940]  [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[  994.506944]  [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[  994.506946]  [<ffffffff81452815>] device_add+0x3b5/0x610
[  994.506949]  [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[  994.506951]  [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[  994.506955]  [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[  994.506957]  [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[  994.506958]  [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[  994.506960]  [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[  994.506967]  [<ffffffffa07529f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[  994.506971]  [<ffffffffa0752a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[  994.506975]  [<ffffffffa0752a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[  994.506976]  [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[  994.506980]  [<ffffffffa075083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[  994.506982]  [<ffffffff81487bb6>] store_scan+0xa6/0x100
[  994.506985]  [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[  994.506988]  [<ffffffff81450318>] dev_attr_store+0x18/0x30
[  994.506989]  [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[  994.506991]  [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[  994.506993]  [<ffffffff81203f17>] __vfs_write+0x37/0x100
[  994.506995]  [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[  994.506999]  [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[  994.507002]  [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[  994.507003]  [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[  994.507006]  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[  994.507008]  [<ffffffff812053b5>] SyS_write+0x55/0xc0
[  994.507011]  [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[  994.507012] ---[ end trace 5d59079faf7d2511 ]---
[  994.507042] scsi 7:0:0:0: failed to add device: -17
[  994.986819] scsi host8: iSCSI Initiator over TCP/IP
[  995.001630] scsi 8:0:0:0: Direct-Access     LIO-ORG  IBLOCK           4.0 
PQ: 0 ANSI: 5
[  995.001995] sd 8:0:0:0: alua: supports implicit and explicit TPGS
[  995.002076] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match
SCSI CDB Length: 8 for SAM Opcode: 0x12
[  995.002117] sd 8:0:0:0: alua: No target port descriptors found
[  995.002119] sd 8:0:0:0: alua: Attach failed (-22)
[  995.002141] sd 8:0:0:0: [sdh] 2097152 512-byte logical blocks: (1.07 GB/1.00
GiB)
[  995.002142] sd 8:0:0:0: failed to add device handler: -22
[  995.002187] sd 8:0:0:0: [sdh] Write Protect is off
[  995.002189] sd 8:0:0:0: [sdh] Mode Sense: 00 00 00 00
[  995.002191] sd 8:0:0:0: [sdh] Asking for cache data failed
[  995.002211] sd 8:0:0:0: [sdh] Assuming drive cache: write through
[  995.002612] sd 8:0:0:0: [sdh] Attached SCSI disk
[  995.150008] scsi 8:0:0:0: Direct-Access     LIO-ORG  IBLOCK           4.0 
PQ: 0 ANSI: 5
[  995.150316] ------------[ cut here ]------------
[  995.150321] WARNING: CPU: 2 PID: 10504 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[  995.150322] sysfs: cannot create duplicate filename
'/bus/scsi/devices/8:0:0:0'
[  995.150323] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod
openvswitch bonding ib_srp scsi_transport_srp ib_ipoib nf_defrag_ipv6 rdma_ucm
ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad usnic_verbs ib_core
xt_comment xt_multiport iptable_filter ib_addr iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 x86_pkg_temp_thermal nf_nat_ipv4 intel_powerclamp nf_nat
coretemp kvm_intel nf_conntrack kvm iptable_mangle irqbypass crct10dif_pclmul
[  995.150367]  crc32_pclmul nfsd aesni_intel lrw gf128mul glue_helper
ablk_helper cryptd ses enclosure sb_edac sg auth_rpcgss edac_core iTCO_wdt
ipmi_devintf iTCO_vendor_support nfs_acl lockd shpchp pcspkr lpc_ich ipmi_si
ipmi_msghandler mfd_core wmi acpi_power_meter grace sunrpc br_netfilter bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ixgbe(O) drm fnic i40e
libfcoe igb megaraid_sas enic libfc crc32c_intel vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit dca i2c_core pps_core dm_mirror
dm_region_hash dm_log dm_mod
[  995.150399] CPU: 2 PID: 10504 Comm: iscsiadm Tainted: G        W  O    4.4.0
#1
[  995.150400] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[  995.150402]  0000000000000000 0000000000b57f59 ffff882d19ffb948
ffffffff81329090
[  995.150404]  ffff882d19ffb990 ffff882d19ffb980 ffffffff810862c6
ffff88007ac62000
[  995.150405]  ffff882f9f889900 ffff882fa50dee10 0000000000000001
ffffffffffffffef
[  995.150407] Call Trace:
[  995.150412]  [<ffffffff81329090>] dump_stack+0x44/0x64
[  995.150415]  [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[  995.150416]  [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[  995.150419]  [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[  995.150420]  [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[  995.150435]  [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[  995.150437]  [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[  995.150440]  [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[  995.150442]  [<ffffffff81452815>] device_add+0x3b5/0x610
[  995.150445]  [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[  995.150447]  [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[  995.150451]  [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[  995.150453]  [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[  995.150454]  [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[  995.150456]  [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[  995.150463]  [<ffffffffa07529f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[  995.150467]  [<ffffffffa0752a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[  995.150470]  [<ffffffffa0752a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[  995.150472]  [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[  995.150475]  [<ffffffffa075083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[  995.150477]  [<ffffffff81487bb6>] store_scan+0xa6/0x100
[  995.150494]  [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[  995.150498]  [<ffffffff81450318>] dev_attr_store+0x18/0x30
[  995.150499]  [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[  995.150500]  [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[  995.150503]  [<ffffffff81203f17>] __vfs_write+0x37/0x100
[  995.150505]  [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[  995.150509]  [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[  995.150512]  [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[  995.150513]  [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[  995.150518]  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[  995.150520]  [<ffffffff812053b5>] SyS_write+0x55/0xc0
[  995.150523]  [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[  995.150525] ---[ end trace 5d59079faf7d2512 ]---
[  995.150556] scsi 8:0:0:0: failed to add device: -17

-- 
You are receiving this mail because:
You are the assignee for the bug.

  parent reply	other threads:[~2016-01-29  3:32 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
2016-01-29  1:53 ` Mike Christie
2016-01-29  2:13   ` Mike Christie
2016-01-29  2:55   ` Serguei Bezverkhi (sbezverk)
2016-01-29  8:01     ` Michael Christie
2016-01-29  8:25       ` Mike Christie
2016-01-29 12:04       ` Serguei Bezverkhi (sbezverk)
2016-01-29 19:08         ` Michael Christie
2016-01-29 19:11           ` Serguei Bezverkhi (sbezverk)
2016-01-29 19:26             ` Mike Christie
2016-01-29 22:21               ` Serguei Bezverkhi (sbezverk)
2016-01-29 23:32                 ` Mike Christie
2016-01-30  7:38                   ` Nicholas A. Bellinger
2016-02-01 16:55                     ` Mike Christie
2016-02-02 16:41                       ` Serguei Bezverkhi (sbezverk)
2016-02-02 22:56                       ` Nicholas A. Bellinger
2016-02-02 23:21                         ` Serguei Bezverkhi (sbezverk)
2016-02-08  8:01                         ` Nicholas A. Bellinger
2016-02-16 19:08                           ` Hannes Reinecke
2016-02-27 22:15                             ` Nicholas A. Bellinger
2016-02-02 18:09                   ` Christoph Hellwig
2016-02-02 20:12                     ` Mike Christie
2016-02-02 20:25                       ` Serguei Bezverkhi (sbezverk)
2016-02-02 21:54                       ` Serguei Bezverkhi (sbezverk)
2016-02-22  0:45                   ` Serguei Bezverkhi (sbezverk)
2016-02-22  7:08                     ` Hannes Reinecke
2016-02-22 11:36                       ` Serguei Bezverkhi (sbezverk)
2016-01-29  3:00 ` [Bug 111441] " bugzilla-daemon
2016-01-29  3:05 ` bugzilla-daemon
2016-01-29  3:32 ` bugzilla-daemon [this message]
2016-01-29  3:40 ` bugzilla-daemon
2016-01-29 12:04 ` bugzilla-daemon
2016-01-29 19:11 ` bugzilla-daemon
2016-01-29 22:21 ` bugzilla-daemon
2016-01-30  7:46 ` bugzilla-daemon
2016-02-01  2:13 ` bugzilla-daemon
2016-02-02 16:41 ` bugzilla-daemon
2016-02-02 20:25 ` bugzilla-daemon
2016-02-02 22:03 ` bugzilla-daemon
2016-02-02 22:56 ` bugzilla-daemon
2016-02-02 23:21 ` bugzilla-daemon
2016-02-08  8:01 ` bugzilla-daemon
2016-02-22  0:45 ` bugzilla-daemon
2016-02-22  7:08 ` bugzilla-daemon
2016-02-22 11:36 ` bugzilla-daemon
2016-02-27 22:15 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-111441-11613-YJB4zFCAjW@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@bugzilla.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.