[Bug 221569] Laptop fan too loud (spinning nearly always) hp-wmi 7.1-rc4 kerenel

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=221569

--- Comment #35 from Milan Oravec (moravec@ukf.sk) ---
Thank you, here is output with Balanced profile:

migo@migo-HP:~$ cat /sys/class/thermal/thermal_zone0/trip_point_*_temp
125000
108000
105000
migo@migo-HP:~$ cat /sys/class/thermal/thermal_zone0/trip_point_*_type
critical
hot
passive
migo@migo-HP:~$ 

and here when Powersave is enabled:

migo@migo-HP:~$ powerprofilesctl set power-saver
migo@migo-HP:~$ cat /sys/class/thermal/thermal_zone0/trip_point_*_temp
125000
108000
105000
migo@migo-HP:~$ cat /sys/class/thermal/thermal_zone0/trip_point_*_type
critical
hot
passive

migo@migo-HP:~$ powerprofilesctl 
  performance:
    CpuDriver:  amd_pstate
    PlatformDriver:     platform_profile
    Degraded:   no

  balanced:
    CpuDriver:  amd_pstate
    PlatformDriver:     platform_profile

* power-saver:
    CpuDriver:  amd_pstate
    PlatformDriver:     platform_profile

no change in temp. trip points and FAN still 2100RPM with 37 deg.C CPU temp.

migo@migo-HP:~$ sudo sensors
[sudo] password for migo: 
hp-isa-0000
Adapter: ISA adapter
fan1:           0 RPM
fan2:           0 RPM
pwm1:             N/A

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +37.9°C  

mt7925_phy0-pci-6200
Adapter: PCI adapter
temp1:        +79.0°C  

nvme-pci-6000
Adapter: PCI adapter
Composite:    +37.9°C  (low  = -273.1°C, high = +81.8°C)
                       (crit = +84.8°C)
Sensor 1:     +37.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +37.9°C  (low  = -273.1°C, high = +65261.8°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +37.0°C  

ucsi_source_psy_USBC000:001-isa-0000
Adapter: ISA adapter
in0:           5.00 V  (min =  +5.00 V, max = +15.00 V)
curr1:         3.00 A  (max =  +5.00 A)

ucsi_source_psy_USBC000:002-isa-0000
Adapter: ISA adapter
in0:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
curr1:         0.00 A  (max =  +0.00 A)

amdgpu-pci-6300
Adapter: PCI adapter
vddgfx:        0.00 V  
vddnb:         0.00 V  
edge:         +36.0°C  
PPT:           4.00 W  (avg =   4.00 W)
sclk:         812 MHz 

BAT0-acpi-0
Adapter: ACPI interface
in0:           8.27 V  
power1:        0.00 W  

acpi_fan-isa-0000
Adapter: ISA adapter
fan1:        2100 RPM

migo@migo-HP:~$

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.