[Bug 28216] New: Radeon driver "No buffer for z buffer" error

[Bug 28216] New: Radeon driver "No buffer for z buffer" error

[bugzilla-daemon]

https://bugs.freedesktop.org/show_bug.cgi?id=28216

           Summary: Radeon driver "No buffer for z buffer" error
           Product: Mesa
           Version: unspecified
          Platform: x86-64 (AMD64)
        OS/Version: Linux (All)
            Status: NEW
          Severity: normal
          Priority: medium
         Component: Drivers/DRI/r300
        AssignedTo: dri-devel@lists.freedesktop.org
        ReportedBy: alexo.uniweb@gmail.com


X-Plane Demo fails to start with the following error:

drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See
dmesg for more info.

Corresponding `dmesg' snippet is as follows:

[53540.965939] [drm:r100_cs_track_check] *ERROR* [drm] No buffer for z buffer !
[53540.965945] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !

The free installer is available through the following address:

http://dev.x-plane.com/update/installers9/X-PlaneDemoInstallerLinux.zip

The `radeon' driver is in use. The xorg.conf is not used in my system. The
video card is ATI Mobility Radeon X2500 aka X1600.

More information on logs is available at Launchpad:

https://bugs.edge.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/581233

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 28216] Radeon driver "No buffer for z buffer" error

[bugzilla-daemon]

https://bugs.freedesktop.org/show_bug.cgi?id=28216

Anton Salikhmetov <alexo.uniweb@gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |alexo.uniweb@gmail.com
           See Also|                            |https://launchpad.net/bugs/
                   |                            |581233

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 28216] Radeon driver "No buffer for z buffer" error

[bugzilla-daemon]

https://bugs.freedesktop.org/show_bug.cgi?id=28216

--- Comment #1 from Marek Olšák <maraeo@gmail.com> 2010-05-23 08:04:40 PDT ---
Can you please try Mesa 7.8? There are walls of commits from Maciej for the
R300c driver and a lot of fixes among them too.

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Bug 28216] Radeon driver "No buffer for z buffer" error

[bugzilla-daemon]

https://bugs.freedesktop.org/show_bug.cgi?id=28216

--- Comment #2 from Anton Salikhmetov <alexo.uniweb@gmail.com> 2010-05-23 11:35:55 PDT ---
(In reply to comment #1)
> Can you please try Mesa 7.8? There are walls of commits from Maciej for the
> R300c driver and a lot of fixes among them too.

Though Ubuntu Lucid does not yet ship Mesa 7.8, I used the following PPA
instead:

https://edge.launchpad.net/~bryceharrington/+archive/bronze

The behavior is the same as for Mesa 7.7.1 which was in use before the upgrade.

Apparently there have been no changes that would affect this error.

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 28216] Radeon driver "No buffer for z buffer" error

[bugzilla-daemon]

https://bugs.freedesktop.org/show_bug.cgi?id=28216

--- Comment #3 from mystilleef@gmail.com 2011-10-05 01:08:16 PDT ---
I get this bug with Mutter and Compiz when I try to use a dual monitor setup
for a combined resolution of 3200x2000.


1920x1200 - Dell 24"
1280x 800 - Laptop 15'
======================
3200x2000 - Total

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

[Bug 28216] Radeon driver "No buffer for z buffer" error

[bugzilla-daemon]

https://bugs.freedesktop.org/show_bug.cgi?id=28216

--- Comment #4 from Michel Dänzer <michel@daenzer.net> 2011-10-05 03:08:42 PDT ---
(In reply to comment #3)
> I get this bug with Mutter and Compiz when I try to use a dual monitor setup
> for a combined resolution of 3200x2000.

Note that even if you get the exact same messages, they might not be caused by
the same problem for you as for Anton. It's probably better if you file your
own bug. Either way though, please attach the full Xorg.0.log file and the
output of glxinfo and dmesg.

BTW, both of you might also want to try the r300g driver from a current Mesa
release if you haven't already.

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Bug 28216] Radeon driver "No buffer for z buffer" error

[bugzilla-daemon]

https://bugs.freedesktop.org/show_bug.cgi?id=28216

--- Comment #5 from Michel Dänzer <michel@daenzer.net> 2011-10-05 06:29:38 PDT ---
(In reply to comment #5)
> X-Plane Demo fails to start with the following error:

BTW, beware that X-Plane is a 32-bit executable, so if you're using a 64-bit
distro, make sure your 32-bit r300_dri.so is up to date.

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Bug 28216] Radeon driver "No buffer for z buffer" error

[bugzilla-daemon]

[-- Attachment #1.1: Type: text/plain, Size: 697 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=28216

Andreas Boll <andreas.boll.dev@gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |WONTFIX

--- Comment #6 from Andreas Boll <andreas.boll.dev@gmail.com> ---
The classic r300 driver has been abandoned long ago.
It was replaced by the Gallium driver r300g.

If you have issues with r300g please file a new bug report with component
Drivers/Gallium/r300

Thanks.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2193 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel