[Bug 37841] New: Display distortion with powerprofile mid or low

* [Bug 37841] New: Display distortion with powerprofile mid or low
@ 2011-06-02  4:49 bugzilla-daemon
  2011-06-02  4:52 ` [Bug 37841] " bugzilla-daemon
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: bugzilla-daemon @ 2011-06-02  4:49 UTC (permalink / raw)
  To: dri-devel

https://bugs.freedesktop.org/show_bug.cgi?id=37841

           Summary: Display distortion with powerprofile mid or low
           Product: DRI
           Version: XOrg CVS
          Platform: x86-64 (AMD64)
        OS/Version: Linux (All)
            Status: NEW
          Severity: major
          Priority: medium
         Component: DRM/Radeon
        AssignedTo: dri-devel@lists.freedesktop.org
        ReportedBy: bugreport@spambog.com

Overview:
The display is distorted when power-profile low or mid is activated.

Steps to reproduce:
echo low > /sys/class/drm/card0/device/power_profile
or
echo mid > /sys/class/drm/card0/device/power_profile

Actual Results:
The display is distorted, but the system is still usable. The distortion
consists of noisy flickering vertical stripes, with columns between them
that look ok. When I choose powerprofile default or auto or high the
distortion goes away and everything's as before.

Output of
cat /sys/kernel/debug/dri/{0,64}/radeon_pm_info:

With powerprofile default:
default engine clock: 500000 kHz
current engine clock: 499500 kHz
default memory clock: 600000 kHz
current memory clock: 594000 kHz
voltage: 1000 mV
PCIE lanes: 16
default engine clock: 500000 kHz
current engine clock: 499500 kHz
default memory clock: 600000 kHz
current memory clock: 594000 kHz
voltage: 1000 mV
PCIE lanes: 16

With powerprofile mid:
default engine clock: 500000 kHz
current engine clock: 124870 kHz
default memory clock: 600000 kHz
current memory clock: 405000 kHz
voltage: 900 mV
PCIE lanes: 16
default engine clock: 500000 kHz
current engine clock: 124870 kHz
default memory clock: 600000 kHz
current memory clock: 405000 kHz
voltage: 900 mV
PCIE lanes: 16

With powerprofile low:
default engine clock: 500000 kHz
current engine clock: 124870 kHz
default memory clock: 600000 kHz
current memory clock: 405000 kHz
voltage: 900 mV
PCIE lanes: 16
default engine clock: 500000 kHz
current engine clock: 124870 kHz
default memory clock: 600000 kHz
current memory clock: 405000 kHz
voltage: 900 mV
PCIE lanes: 16

With powerprofile high:
default engine clock: 500000 kHz
current engine clock: 499500 kHz
default memory clock: 600000 kHz
current memory clock: 594000 kHz
voltage: 1000 mV
PCIE lanes: 16
default engine clock: 500000 kHz
current engine clock: 499500 kHz
default memory clock: 600000 kHz
current memory clock: 594000 kHz
voltage: 1000 mV
PCIE lanes: 16

Expected Results:
No display distortion and perhaps other values in radeon_pm_info (values of
mid and low profile should differ and perhaps there should have been some
lanes deactivated by these profiles).
Btw. there is no such problem when I use the powermanagement-features in
xorg.conf (ForceLowPowerMode, ClockGating, DynamicPM) without KMS enabled.

Versions:
See attached logfiles.
Bug exists since power-profiles had been introduced (in kernel 2.6.34 or
2.6.35).

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.

^ permalink raw reply	[flat|nested] 4+ messages in thread