[Bug 60680] New: HDMI is connected and has mode, TV says "no signal"

[Bug 60680] New: HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 2157 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

          Priority: medium
            Bug ID: 60680
          Assignee: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
           Summary: HDMI is connected and has mode, TV says "no signal"
        QA Contact: xorg-team-go0+a7rfsptAfugRpC6u6w@public.gmane.org
          Severity: normal
    Classification: Unclassified
                OS: Linux (All)
          Reporter: ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
          Hardware: x86-64 (AMD64)
            Status: NEW
           Version: unspecified
         Component: Driver/nouveau
           Product: xorg

Created attachment 74633
  --> https://bugs.freedesktop.org/attachment.cgi?id=74633&action=edit
kernel log with nouveau.debug=trace, v3.8-rc5-51-g4f84a11

TV does not receive signal when connected via HDMI to my Asus G50V laptop.
Laptop is single-GPU, NV96. xrandr shows HDMI as connected, having a mode, and
it should just work but doesn't. TV does not detect a signal.

LVDS works just fine.

I have tried:
- switching HDMI on and off via xrandr
- setting different video modes with xrandr for the HDMI
- booting with and without HDMI cable connected
- hotplugging HDMI

DDX 1.0.6.
Kernel is the nouveau kernel based on 3.8.0-rc5, v3.8-rc5-51-g4f84a11
commit 4f84a118d8872f21e1d5b78241e0e6f31b79e46b
Author: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date:   Tue Feb 5 20:44:19 2013 +0100

    drm/nouveau/therm: reduce stack usage of nouveau_therm_ic_ctor


The nvidia proprietary drivers can run the TV via HDMI fine.

This is the first time I am trying to run nouveau with HDMI on this machine.

In the kernel log at timestamp 93, I was in X and ran:
$ xrandr --output LVDS-1 --auto --output HDMI-1 --auto --right-of LVDS-1
Before that X had seemed to set up a clone mode at the laptop panels resolution
also on TV.


Similar bugs:
#37085 - I do not know if my case is a regression, different chips.
#43939 - I am using a real TV, not a DVI monitor.
#56601 - I have not even attempted audio yet, video only.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 3705 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 365 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #1 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Created attachment 74634
  --> https://bugs.freedesktop.org/attachment.cgi?id=74634&action=edit
X log, to go with kernel log v3.8-rc5-51-g4f84a11

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1323 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 375 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #2 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Created attachment 74637
  --> https://bugs.freedesktop.org/attachment.cgi?id=74637&action=edit
video bios image, extracted from /sys/bus/pci/devices/*/rom

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1353 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 467 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #3 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Created attachment 74641
  --> https://bugs.freedesktop.org/attachment.cgi?id=74641&action=edit
xrandr --prop output, when both LVDS and HDMI configured --auto

And the TV says "no signal". Yes, I'm fairly sure I've selected the right input
on TV.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1463 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 351 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #4 from Ben Skeggs <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
I'm not sure if it'll help, but there's an additional commit (fix missing sor
modectrl sync flags) which might be related sitting in git.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1114 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 847 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #5 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
(In reply to comment #4)
> I'm not sure if it'll help, but there's an additional commit (fix missing
> sor modectrl sync flags) which might be related sitting in git.

I tried a new complete kernel with that patch, but unfortunately it doesn't
help.

Btw. the attached kernel log has this line:
[   10.194866] farn kernel: nouveau E[    PBUS][0000:01:00.0] MMIO write of
0x00000000 FAULT at 0x400724
and a few times I have been left with no outputs at all, when changing modes on
the 3.8-rc kernel, but that is a different story.


Now I know this is a regression: in 3.5.2-gentoo kernel Nouveau can drive the
HDMI output fine.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1689 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 419 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #6 from runetmember-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org ---
I have same issue on Acer Aspire 5920G laptop with NV84 GPU and attached HDMI
display. If Pekka information about affected hardware is not enough and
information by me is also needed - just ask, and I'll upload it.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1170 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1003 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
            Summary|HDMI is connected and has   |[NV96] HDMI is connected
                   |mode, TV says "no signal"   |and has mode, TV says "no
                   |                            |signal"

--- Comment #7 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
Can you confirm that this is still an issue with 3.11-rc6? If so, a bisect
between 3.5 and 3.8 would be great. Probably some infoframe validation thing,
the TV doesn't like it. (My personal bet would be the "move hdmi to new system"
commit...) Note that the bisect would only have to go over
drivers/gpu/drm/nouveau, not the whole kernel, so it shouldn't take *too* many
tries.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2276 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 888 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #8 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
(In reply to comment #7)
> Can you confirm that this is still an issue with 3.11-rc6? If so, a bisect
> between 3.5 and 3.8 would be great. Probably some infoframe validation
> thing, the TV doesn't like it. (My personal bet would be the "move hdmi to
> new system" commit...) Note that the bisect would only have to go over
> drivers/gpu/drm/nouveau, not the whole kernel, so it shouldn't take *too*
> many tries.

Sure, I'll see what I have time to do. Damn, it's been 6 months since I
reported it, I could have figured I had time to bisect, but meh :-D

I was slightly discouraged because the bisection would cross the great rewrite,
but maybe that was unwarranted.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1766 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1384 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #9 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
As preparing for bisection, here are new confirmed data points:

- 3.5.2 vanilla kernel (i.e. not Gentoo-patches) works.
- 3.11-rc6 vanilla kernel does not work.

I am specifically looking at whether boot-time fbcon after nouveau loads shows
up on HDMI, whether X by default shows up on HDMI, and can I get the HDMI
output exclusively.

On 3.5.2, fbcon is cloned, X by default is cloned, and HDMI exclusive works.

On 3.11-rc6, fbcon shows only on LVDS, X by default shows only on LVDS, and
HDMI exclusive does not show up anywhere. (off-topic: default resolution was
not native for LVDS anymore.)

The HDMI exclusive is set up by:
$ xrandr --output LVDS-1 --off --output HDMI-1 --mode 1920x1080 --set 'scaling
mode' 'None'

I did also try dual setup:
$ xrandr --output LVDS-1 --auto --output HDMI-1 --mode 1920x1080 --set 'scaling
mode' 'None' --right-of LVDS-1
but that does not work even on 3.5.2, LVDS works but TV says no signal.
Apparently something in manual dual-screen setup gets messed up, while boot-up
dual screen works. But that is off-topic here.

Therefore, my bisection will concentrate on whether HDMI exclusive at full-HD
resolution works or not.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2167 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 2626 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #10 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Bisection complete:

cb75d97e9c77743ecfcc43375be135a55a4d9b25 is the first bad commit
commit cb75d97e9c77743ecfcc43375be135a55a4d9b25
Author: Ben Skeggs <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Date:   Wed Jul 11 10:44:20 2012 +1000

    drm/nouveau: implement devinit subdev, and new init table parser

    v2:
    - make sure not to execute display scripts unless resuming

    Signed-off-by: Ben Skeggs <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>


The results during bisection were consistent:
- if good, fbcon appears cloned to HDMI at boot, X appears cloned to HDMI by
default, and the HDMI-only full-HD setup works
- if bad, TV always reports "no signal"


$ git bisect log
# bad: [19f949f52599ba7c3f67a5897ac6be14bfcb1200] Linux 3.8
# good: [684012d815c70359162d8b9cc9879b83855e59bf] Linux 3.5.2
git bisect start 'v3.8' 'v3.5.2' '--' 'drivers/gpu/drm/nouveau'
# good: [28a33cbc24e4256c143dce96c7d93bf423229f92] Linux 3.5
git bisect good 28a33cbc24e4256c143dce96c7d93bf423229f92
# bad: [ae168d973f5fa3f3467dc5600f74a0f03e3cafe7] Merge branch
'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6 into
drm-fixes
git bisect bad ae168d973f5fa3f3467dc5600f74a0f03e3cafe7
# bad: [c4837d27945b9b607b5a7274a33059e73d1a7831] drm/nouveau/core: remove some
left-over pieces from the porting process
git bisect bad c4837d27945b9b607b5a7274a33059e73d1a7831
# good: [70c0f263cc2eb12e02506eb75f0a71490e7dea4d] drm/nouveau/bios: pull in
basic vbios subdev, more to come later
git bisect good 70c0f263cc2eb12e02506eb75f0a71490e7dea4d
# bad: [3863c9bc887e9638a9d905d55f6038641ece78d6] drm/nouveau/instmem:
completely new implementation, as a subdev module
git bisect bad 3863c9bc887e9638a9d905d55f6038641ece78d6
# bad: [0134a97979a0abc1c756b0fe491e074693c2bdf5] drm/nv50-/instmem: allocate
vram for kernel objects from end of vram
git bisect bad 0134a97979a0abc1c756b0fe491e074693c2bdf5
# good: [70790f4f819875e8f390871fd15bbbf823f28e1b] drm/nouveau/clock: pull in
the implementation from all over the place
git bisect good 70790f4f819875e8f390871fd15bbbf823f28e1b
# bad: [7d9115dee978e8540734c456c925d71a37752b8d] drm/nouveau/mc: port to
subdev interfaces
git bisect bad 7d9115dee978e8540734c456c925d71a37752b8d
# bad: [cb75d97e9c77743ecfcc43375be135a55a4d9b25] drm/nouveau: implement
devinit subdev, and new init table parser
git bisect bad cb75d97e9c77743ecfcc43375be135a55a4d9b25

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 3470 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 427 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #11 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
Well, this commit is obviously enormous. And I'm guessing the difference is
something stupid. Could run mmiotraces (of nouveau) before and after the
offending commit? That should help narrow down the difference.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1355 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #12 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
http://people.freedesktop.org/~pq/mmiotrace-fdo-bug-60680.tar.xz (8.8 MB)

You can find a package containing mmiotraces from the last good and the first
bad kernel revision in the above URL. The traces contain the following marks.

Good:
MARK 11.701343 before begin
MARK 38.640046 nouveau loaded, TV has fbcon
MARK 39.232127 going to start X
MARK 64.224171 X is up, TV has picture
MARK 87.013208 going to change to TV-only
MARK 93.579942 TV is on with full-HD mode
MARK 97.452990 switched to LVDS-only

Bad:
MARK 16.029575 before begin
MARK 46.718026 nouveau loaded, no signal on TV
MARK 47.340368 going to start X
MARK 71.961538 X is up, no signal on TV
MARK 74.445054 going to switch to TV-only full-HD
MARK 84.561667 done, I'm blind
MARK 87.738044 switched to LVDS-only

The command to set the TV-only full-HD mode is:
$ xrandr --output LVDS-1 --off --output HDMI-1 --mode 1920x1080 --set 'scaling
mode' 'None'

The command to set the LVDS-only mode is:
$ xrandr --output LVDS-1 --auto --output HDMI-1 --off

Note that by default Nouveau (fbcon and X) light up both outputs as clones when
it works, just like I've described before.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2218 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 4995 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #13 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
A few observations from running

diff -u <(grep -P '(PDISPLAY|MARK)' good/demmio | sed 's/.*MMIO//')  <(grep -P
'(PDISPLAY|MARK)' bad/demmio | sed 's/.*MMIO//')

(the demmio files are envytools/rnn/demmio -f good/mydump.txt > good/demmio)

These largely look the same. However the "good" trace has three sequences that
don't appear in the "bad" trace:

1. A bunch of reads from a bunch of registers, towards the very beginning.

2. Some SOR clock setting:

 32 W 0x61c814 0x00000000 PDISPLAY.SOR[0x1].PLL2 <= 0
 32 R 0x61c90c 0x00401100 PDISPLAY.SOR[0x1].LINK[0].DP_CTRL => { LANE_MASK = 0
| TRAINING_PATTERN = DISABLED | 0x401100 }
 32 W 0x61c90c 0x00401101 PDISPLAY.SOR[0x1].LINK[0].DP_CTRL <= { LANE_MASK = 0
| TRAINING_PATTERN = DISABLED | 0x401101 }
-32 R 0x619494 0x000900e0 PDISPLAY.VGA.CR+0x94 => 0x900e0
 32 R 0x614b00 0x00870484 PDISPLAY.CLOCK.SOR[0x1] => 0x870484
-32 W 0x614b00 0x03870484 PDISPLAY.CLOCK.SOR[0x1] <= 0x3870484
-32 R 0x614b00 0x03870484 PDISPLAY.CLOCK.SOR[0x1] => 0x3870484
-32 R 0x61c80c 0x01000000 PDISPLAY.SOR[0x1].PLL0 => 0x1000000
-32 W 0x61c80c 0x00000000 PDISPLAY.SOR[0x1].PLL0 <= 0
-32 R 0x61c808 0x00800000 PDISPLAY.SOR[0x1]+0x8 => 0x800000
-32 W 0x61c808 0x14800000 PDISPLAY.SOR[0x1]+0x8 <= 0x14800000
-32 R 0x61c808 0x14800000 PDISPLAY.SOR[0x1]+0x8 => 0x14800000
-32 W 0x61c808 0x00800000 PDISPLAY.SOR[0x1]+0x8 <= 0x800000
-32 R 0x61c80c 0x00000000 PDISPLAY.SOR[0x1].PLL0 => 0
-32 W 0x61c80c 0x01000000 PDISPLAY.SOR[0x1].PLL0 <= 0x1000000
-32 R 0x61c840 0x1f000000 PDISPLAY.SOR[0x1].SEQ_INST[0] => 0x1f000000
-32 W 0x61c840 0x1f008000 PDISPLAY.SOR[0x1].SEQ_INST[0] <= 0x1f008000
-32 R 0x614b00 0x03870484 PDISPLAY.CLOCK.SOR[0x1] => 0x3870484
-32 W 0x614b00 0x03870080 PDISPLAY.CLOCK.SOR[0x1] <= 0x3870080
+32 W 0x614b00 0x00870080 PDISPLAY.CLOCK.SOR[0x1] <= 0x870080
 32 W 0x610024 0x00000020 PDISPLAY.INTR_1 <= { CLK_UNK1 }
 32 W 0x610030 0x80000000 PDISPLAY.UNK30_CTRL <= { PENDING }
 32 R 0x610020 0x00000000 PDISPLAY.INTR_0 => { 0 }

3. A bunch of times, this same sequence is repeated:

 32 R 0x610020 0x00000000 PDISPLAY.INTR_0 => { 0 }
 32 R 0x610024 0x00000040 PDISPLAY.INTR_1 => { CLK_UNK2 }
 32 R 0x610030 0x00000550 PDISPLAY.UNK30_CTRL => { UPDATE_VCLK1 | 0x150 }
-32 R 0x619494 0x000900e0 PDISPLAY.VGA.CR+0x94 => 0x900e0
-32 R 0x61c860 0x00002000 PDISPLAY.SOR[0x1].SEQ_INST[0x8] => 0x2000
-32 W 0x61c860 0x1f008000 PDISPLAY.SOR[0x1].SEQ_INST[0x8] <= 0x1f008000
-32 W 0x61c804 0x80000000 PDISPLAY.SOR[0x1].PWR <= { NORMAL_STATE = PD |
NORMAL_START = NORMAL | SAFE_STATE = PD | SAFE_START = NORMAL | TRIGGER }
-32 R 0x61c804 0x00000000 PDISPLAY.SOR[0x1].PWR => { NORMAL_STATE = PD |
NORMAL_START = NORMAL | SAFE_STATE = PD | SAFE_START = NORMAL }
-32 R 0x61c804 0x00000000 PDISPLAY.SOR[0x1].PWR => { NORMAL_STATE = PD |
NORMAL_START = NORMAL | SAFE_STATE = PD | SAFE_START = NORMAL }
-32 R 0x61c830 0x00088800 PDISPLAY.SOR[0x1].BLANK => 0x88800
-32 R 0x61c830 0x00088800 PDISPLAY.SOR[0x1].BLANK => 0x88800
-32 R 0x61c840 0x1f008000 PDISPLAY.SOR[0x1].SEQ_INST[0] => 0x1f008000
-32 W 0x61c840 0x1f000000 PDISPLAY.SOR[0x1].SEQ_INST[0] <= 0x1f000000
-32 R 0x61c860 0x1f008000 PDISPLAY.SOR[0x1].SEQ_INST[0x8] => 0x1f008000
-32 W 0x61c860 0x00002000 PDISPLAY.SOR[0x1].SEQ_INST[0x8] <= 0x2000
-32 R 0x61c90c 0x00401101 PDISPLAY.SOR[0x1].LINK[0].DP_CTRL => { LANE_MASK = 0
| TRAINING_PATTERN = DISABLED | 0x401101 }
-32 W 0x61c90c 0x00401100 PDISPLAY.SOR[0x1].LINK[0].DP_CTRL <= { LANE_MASK = 0
| TRAINING_PATTERN = DISABLED | 0x401100 }
-32 R 0x614b00 0x03878040 PDISPLAY.CLOCK.SOR[0x1] => 0x3878040
-32 W 0x614b00 0x00878040 PDISPLAY.CLOCK.SOR[0x1] <= 0x878040
-32 W 0x61c804 0x80000001 PDISPLAY.SOR[0x1].PWR <= { NORMAL_STATE = PU |
NORMAL_START = NORMAL | SAFE_STATE = PD | SAFE_START = NORMAL | TRIGGER }
-32 R 0x61c804 0x00000001 PDISPLAY.SOR[0x1].PWR => { NORMAL_STATE = PU |
NORMAL_START = NORMAL | SAFE_STATE = PD | SAFE_START = NORMAL }
-32 R 0x61c804 0x00000001 PDISPLAY.SOR[0x1].PWR => { NORMAL_STATE = PU |
NORMAL_START = NORMAL | SAFE_STATE = PD | SAFE_START = NORMAL }
-32 R 0x61c830 0x00038800 PDISPLAY.SOR[0x1].BLANK => 0x38800
-32 R 0x61c830 0x00038800 PDISPLAY.SOR[0x1].BLANK => 0x38800
 32 W 0x610024 0x00000040 PDISPLAY.INTR_1 <= { CLK_UNK2 }
 32 W 0x610030 0x80000000 PDISPLAY.UNK30_CTRL <= { PENDING }
 32 R 0x619494 0x000900e0 PDISPLAY.VGA.CR+0x94 => 0x900e0

There are a few other minor discrepancies, but I don't think they're very
interesting. Not sure what to make of this -- these reigsters don't appear to
be written to by the code directly, so it must be some sort of script getting
executed? I wonder if the extra SOR.PLL/etc stuff (from #2 above) need to go
into the NV50_DISP_SOR_PWR sequence. Or perhaps there's some sort of difference
in the evo stuff, which I don't think is reflected in the mmiotrace.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 5959 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 533 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #14 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Ilia suggested that I try booting with nouveau.config=NvForcePost=1.

I had TV plugged in HDMI and on, I booted the first bad kernel revision with
nouveau.config=NvForcePost=1, and got no picture on either HDMI or LVDS once
Nouveau initialized.

(Note to self: kernel logs are at timestamp 2013 Sep 28 08:56:17.)

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1317 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 621 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #15 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
Armed with a bit more knowledge about the whole VBIOS thing... can you boot one
of the good kernels with drm.debug=0xe -- that should produce BIOSLOG's for the
majority of instructions... I think.

Also, the VBIOS that you uploaded is all weird (x86 opcodes instead of script
opcodes, which apparently can happen if you grab from pcirom). Would you mind
grabbing it from /sys/kernel/debug/dri/0/vbios.rom?

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1406 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 672 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
  Attachment #74637|0                           |1
        is obsolete|                            |

--- Comment #16 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Created attachment 92167
  --> https://bugs.freedesktop.org/attachment.cgi?id=92167&action=edit
VBIOS from /sys/kernel/debug/dri/0/vbios.rom

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2134 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 592 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #17 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Created attachment 92168
  --> https://bugs.freedesktop.org/attachment.cgi?id=92168&action=edit
Kernel log 3.5.2, HDMI clone ok, drm.debug=0xe

As requested, here is the log from a kernel that lights up the HDMI output
properly.

Laptop booted with HDMI connected and TV on, nouveau module then loaded
manually after boot. Fbcon is cloned to both LVDS and HDMI correctly.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1559 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 634 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #18 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
Created attachment 92185
  --> https://bugs.freedesktop.org/attachment.cgi?id=92185&action=edit
vbios-pq1.patch

Pick any failing kernel that you like, and try applying this patch. Boot with
nouveau.debug=VBIOS=trace,PDISP=debug which should just get the logs we care
about.

BTW, my observation is that IO condition 5 is met in the old kernels, but not
met in the new ones. This changes the execution flow, of course.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1624 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1022 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #19 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
... and if that doesn't work, try making it a rd32 & 0xff instead of a rd08.
[would also need more logic to handle non-aligned-to-4 reads, but you don't
have those]

Looking at the full mmiotrace (rather than just PDISPLAY as my earlier diff was
doing), there are sections like

[0] 35.111642 MMIO32 R 0x619494 0x000900e8 PDISPLAY.VGA.CR+0x94 => 0x900e8
[0] 35.111688 MMIO32 W 0x619494 0x000900e0 PDISPLAY.VGA.CR+0x94 <= 0x900e0
... ~30 more identical lines ...

and then in the good trace:
[0] 35.113651 MMIO32 R 0x619494 0x000900e0 PDISPLAY.VGA.CR+0x94 => 0x900e0

but in the bad trace:
[0] 39.098615 MMIO8 W 0x6013d4 0x00000094 PRMIO.CRX <= 0x94
[0] 39.098655 CRTC0 R     0x94       0x00 0x94 => 0

And that is the value used by the condition 0x05. So it seems really likely
that this will help. I hope.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1826 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 852 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #20 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Created attachment 92319
  --> https://bugs.freedesktop.org/attachment.cgi?id=92319&action=edit
kernel 3.12.6 with vbios-pq1.patch log

Here is the kernel log with the nouveau debug options Ilia asked, with the
vbios-pq1.patch applied. I booted with HDMI connected to the live TV, and I
manually loaded nouveau.ko after boot.

I'm happy to say that this change makes fbcon appear on the TV!

This also makes X show up on TV, and I can use xrandr to set the TV to full-HD
resolution, extending my desktop from LVDS. So they both came up fine this time
(I've had vague problems with using both outputs non-cloned before).

Wheee! \o/

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1803 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 386 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #21 from Andreas Reis <andreas.reis-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
I applied the vbios-pq1.patch to 3.13-rc8+ to check if it fixes the same NV96
HDMI issue (mentioned incidentally in bug #73791), and it indeed works for me
as well.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1344 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 306 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #22 from fd_mitch-3KzNJp4Rz8A@public.gmane.org ---
I applied the patch on the Ubuntu 13.10 kernel (3.11.0-15-generic) and it
solved the issue (second monitor blank).

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1074 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 727 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

--- Comment #23 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
A different patch was checked in to handle this and is now in drm-next and
should appear in 3.14-rc1. Marking this as fixed... feel free to reopen if the
thing in drm-next doesn't work for you.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2192 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 60680] [NV96] HDMI is connected and has mode, TV says "no signal"

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1035 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=60680

--- Comment #24 from Pekka Paalanen <ppaalanen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
Tried the complete kernel from nouveau/drm-nouveau-next
(v3.13-rc8-665-g1139ffb) which contains the commit

commit f87cd8b695d372087685976460fac1ec6ba2fca9
Author: Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org>
Date:   Sun Jan 19 04:18:15 2014 -0500

    drm/nouveau/devinit: lock/unlock crtc regs for all devices, not just
pre-nv50

    Also make nv_lockvgac work for nv50+ devices. This should fix
    IO_CONDITION and related VBIOS opcodes that read/write the crtc regs.

    See https://bugs.freedesktop.org/show_bug.cgi?id=60680

    Signed-off-by: Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org>
    Signed-off-by: Ben Skeggs <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

which apparently is supposed to fix the issue.

This kernel works, and the issue is fixed.

Thank you!

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2143 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau