[Bug 60824] [PATCH][regression] Cambridge Silicon Radio, Ltd Bluetooth Dongle unusable

[bugzilla-daemon@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=60824

Arthur Fragoso (arthur@life.net.br) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |arthur@life.net.br

--- Comment #33 from Arthur Fragoso (arthur@life.net.br) ---
Same here:

0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode).

But the product name is: JL AC69 A10

I tested in Linux 5.2.8-1-MANJARO, and the 4.19.57-1-MANJARO.

The problems are:

- After booting up the OS with the BT Dongle in, if I try to 'sudo bluetoothctl
power on', it fails and 'btmon' returns this:


@ MGMT Command: Set Powered (0x0005) plen 1                                    
         {0x0001} [hci0] 34.681295
        Powered: Enabled (0x01)
= Open Index: 00:1A:7D:DA:71:10                                                
                  [hci0] 34.743182
< HCI Command: Reset (0x03|0x0003) plen 0                                      
               #2 [hci0] 34.743412
= Close Index: 00:1A:7D:DA:71:10                                               
                  [hci0] 44.768939
@ MGMT Event: Command Status (0x0002) plen 3                                   
         {0x0001} [hci0] 44.772086
      Set Powered (0x0005)
        Status: Failed (0x03)
= bluetoothd: Failed to set mode: Failed (0x03)                                
                  [hci0] 44.790305


If I unplug and plug it back, the power on command will work fine. If it is set
to AutoEnable on /etc/bluetooth/main.conf, it will also be powered up after
plugin it back.
If I power off, it will only work again if I unplug and plug it back. So it's
not a big problem.


The big deal is that I can't make it to scan:

$ sudo bluetoothctl scan on

bluetoothd[2358]: src/adapter.c:start_discovery() sender :1.268
bluetoothd[2358]: src/adapter.c:update_discovery_filter() 
bluetoothd[2358]: src/adapter.c:discovery_filter_to_mgmt_cp() 
bluetoothd[2358]: src/adapter.c:trigger_start_discovery() 
bluetoothd[2358]: src/adapter.c:cancel_passive_scanning() 
bluetoothd[2358]: src/adapter.c:start_discovery_timeout() 
bluetoothd[2358]: src/adapter.c:start_discovery_timeout()
adapter->current_discovery_filter == 0
bluetoothd[2358]: src/adapter.c:start_discovery_complete() status 0x03


@ MGMT Command: Start Discovery (0x0023) plen 1           {0x0001} [hci0]
37.252439
        Address type: 0x07
          BR/EDR
          LE Public
          LE Random
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6      #81 [hci0]
37.252583
        Address: 06:4D:6A:64:58:36 (Non-Resolvable)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7     #82 [hci0]
39.423752
        Type: Active (0x01)
        Interval: 22.500 msec (0x0024)
        Window: 11.250 msec (0x0012)
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
@ MGMT Event: Command Complete (0x0001) plen 4            {0x0001} [hci0]
39.423747
      Start Discovery (0x0023) plen 1
        Status: Failed (0x03)
        Address type: 0x07
          BR/EDR
          LE Public
          LE Random
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2         #83 [hci0]
41.557120
        Scanning: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
< HCI Command: Inquiry (0x01|0x0001) plen 5                    #84 [hci0]
43.690407
        Access code: 0x9e8b33 (General Inquiry)
        Length: 10.24s (0x08)
        Num responses: 0


I will try to apply the patch and compile the kernel to see if I can get it to
work. It's crazy to think this thread started in November 2013, and currently
there are many of those CSR dongles being sold.

-- 
You are receiving this mail because:
You are the assignee for the bug.