[Bug 77751] New: radeon: unable to set temperature warning levels

[Bug 77751] New: radeon: unable to set temperature warning levels

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=77751

            Bug ID: 77751
           Summary: radeon: unable to set temperature warning levels
           Product: Drivers
           Version: 2.5
    Kernel Version: 3.15
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: low
          Priority: P1
         Component: Video(DRI - non Intel)
          Assignee: drivers_video-dri@kernel-bugs.osdl.org
          Reporter: higuita@gmx.net
        Regression: No

I have a old Radeon HD2600XT AGP card, but i think this should apply to all
AMD/ATI cards.

Right now, when i use the "sensors" command i get this

radeon-pci-0100
Adapter: PCI adapter
temp-GPU:     +53.0°C  (crit = +120.0°C, hyst = +90.0°C)

But the values for critical and warning are too high for this card, specially
as the fan is unable to run as fast as in the past. To me, right now, when the
card reaches about 84ºC it start to lockup and force me to reboot to recover.

So i tried to configure the sensors.conf, but when running "sensors -s" i get:

Error: File /etc/sensors.d/local.conf, line 87: Failed to set value
Error: File /etc/sensors.d/local.conf, line 88: Failed to set value
radeon-pci-0100: At least one "set" statement failed

i have this configured:

chip "radeon-pci-*"
    label temp1 "temp-GPU"
    set temp1_crit 82
    set temp1_crit_hyst 79

Checking the /sys entry to try to manually set the values i see this:

# ls -l /sys/class/hwmon/hwmon1/
total 0
lrwxrwxrwx 1 root root    0 Jun 12 17:20 device -> ../../../0000:01:00.0
-r--r--r-- 1 root root 4096 Jun 12 22:14 name
drwxr-xr-x 2 root root    0 Jun 12 22:14 power
lrwxrwxrwx 1 root root    0 Jun 12 17:20 subsystem ->
../../../../../../class/hwmon
-r--r--r-- 1 root root 4096 Jun 12 22:14 temp1_crit
-r--r--r-- 1 root root 4096 Jun 12 22:14 temp1_crit_hyst
-r--r--r-- 1 root root 4096 Jun 12 22:14 temp1_input
-rw-r--r-- 1 root root 4096 Jun 12 22:14 uevent

So the temp1_crit and temp1_crit_hyst are readonly, that is why it fails to
setup new values and we can only use hardcoded values.


it would be a good idea to allow one to change this value, and even better if
one could automatically slow down the card when it reach the critical level, to
avoid the crash.

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel