From: bugzilla-daemon@bugzilla.kernel.org
To: kvm@vger.kernel.org
Subject: [Bug 82761] DMAR:[fault reason 06] PTE Read access is not set
Date: Tue, 19 Aug 2014 21:24:43 +0000 [thread overview]
Message-ID: <bug-82761-28872-XgIwmcEzXp@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-82761-28872@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=82761
--- Comment #5 from Ansa89 <ansalonistefano@gmail.com> ---
Tested with 3.17-rc1: the errors still there, but the spam rate seems lower
than 3.16.1 (with 3.16.1 I get the errors repeated a lot of times and the count
grows fast; with 3.17-rc1 I get the same errors repeated less times and the
count seems to grow slower).
After ~10 minutes:
dmesg | grep -i dmar
ACPI: DMAR 0x00000000C8EA83F0 0000B8 (v01 INTEL SNB 00000001 INTL
00000001)
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000c8d17000 end: 0x000000c8d24fff
dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
DMAR: No ATSR found
[drm] DMAR active, disabling use of stolen memory
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000
DMAR:[fault reason 06] PTE Read access is not set
In the end the bug seems not fixed in 3.17-rc1.
--
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2014-08-19 21:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-19 12:18 [Bug 82761] New: DMAR:[fault reason 06] PTE Read access is not set bugzilla-daemon
2014-08-19 12:58 ` [Bug 82761] " bugzilla-daemon
2014-08-19 16:37 ` bugzilla-daemon
2014-08-19 16:51 ` bugzilla-daemon
2014-08-19 17:28 ` bugzilla-daemon
2014-08-19 21:24 ` bugzilla-daemon [this message]
2014-08-19 21:55 ` bugzilla-daemon
2014-08-19 22:18 ` bugzilla-daemon
2014-08-20 7:50 ` bugzilla-daemon
2014-08-21 15:28 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-82761-28872-XgIwmcEzXp@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.