All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugzilla-daemon@bugzilla.kernel.org
To: kvm@vger.kernel.org
Subject: [Bug 82761] New: DMAR:[fault reason 06] PTE Read access is not set
Date: Tue, 19 Aug 2014 12:18:21 +0000	[thread overview]
Message-ID: <bug-82761-28872@https.bugzilla.kernel.org/> (raw)

https://bugzilla.kernel.org/show_bug.cgi?id=82761

            Bug ID: 82761
           Summary: DMAR:[fault reason 06] PTE Read access is not set
           Product: Virtualization
           Version: unspecified
    Kernel Version: 3.16.1
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: kvm
          Assignee: virtualization_kvm@kernel-bugs.osdl.org
          Reporter: ansalonistefano@gmail.com
        Regression: No

When I boot with "intel_iommu=on" parameter, I get these errors repeated over
and over again in dmesg:
---
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
---


lspci -vvs 05:00.0
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI
Gigabit Ethernet Controller (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI
Gigabit Ethernet NIC
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at c200 [size=256]
        Region 1: Memory at f7862000 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at f7840000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: r8169


lspci -vt
-[0000:00]-+-00.0  Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor
DRAM Controller
           +-01.0-[01]--+-00.0  NVIDIA Corporation Device 0fc6
           |            \-00.1  NVIDIA Corporation Device 0e1b
           +-02.0  Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor
Graphics Controller
           +-14.0  Intel Corporation 7 Series/C210 Series Chipset Family USB
xHCI Host Controller
           +-16.0  Intel Corporation 7 Series/C210 Series Chipset Family MEI
Controller #1
           +-1a.0  Intel Corporation 7 Series/C210 Series Chipset Family USB
Enhanced Host Controller #2
           +-1b.0  Intel Corporation 7 Series/C210 Series Chipset Family High
Definition Audio Controller
           +-1c.0-[02]--
           +-1c.1-[03]----00.0  Realtek Semiconductor Co., Ltd. RTL8111/8168B
PCI Express Gigabit Ethernet controller
           +-1c.3-[04-05]----00.0-[05]--+-00.0  Realtek Semiconductor Co., Ltd.
RTL8169 PCI Gigabit Ethernet Controller
           |                            +-01.0  Realtek Semiconductor Co., Ltd.
RTL8169 PCI Gigabit Ethernet Controller
           |                            \-02.0  Realtek Semiconductor Co., Ltd.
RTL8169 PCI Gigabit Ethernet Controller
           +-1d.0  Intel Corporation 7 Series/C210 Series Chipset Family USB
Enhanced Host Controller #1
           +-1f.0  Intel Corporation H77 Express Chipset LPC Controller
           +-1f.2  Intel Corporation 7 Series/C210 Series Chipset Family 6-port
SATA Controller [AHCI mode]
           \-1f.3  Intel Corporation 7 Series/C210 Series Chipset Family SMBus
Controller


dmesg | grep IOMMU
Intel-IOMMU: enabled
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
IOMMU 0 0xfed90000: using Queued invalidation
IOMMU 1 0xfed91000: using Queued invalidation
IOMMU: software identity mapping for device 0000:00:00.0
IOMMU: software identity mapping for device 0000:00:01.0
IOMMU: software identity mapping for device 0000:00:14.0
IOMMU: software identity mapping for device 0000:00:16.0
IOMMU: software identity mapping for device 0000:00:1a.0
IOMMU: software identity mapping for device 0000:00:1b.0
IOMMU: software identity mapping for device 0000:00:1c.0
IOMMU: software identity mapping for device 0000:00:1c.1
IOMMU: software identity mapping for device 0000:00:1c.3
IOMMU: software identity mapping for device 0000:00:1d.0
IOMMU: software identity mapping for device 0000:00:1f.0
IOMMU: software identity mapping for device 0000:00:1f.2
IOMMU: software identity mapping for device 0000:00:1f.3
IOMMU: software identity mapping for device 0000:01:00.0
IOMMU: software identity mapping for device 0000:01:00.1
IOMMU: software identity mapping for device 0000:03:00.0
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0xcb800000 - 0xcf9fffff]
IOMMU: Setting identity map for device 0000:00:14.0 [0xc8d17000 - 0xc8d24fff]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xc8d17000 - 0xc8d24fff]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xc8d17000 - 0xc8d24fff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]


OS: Debian Wheezy
Kernel: 3.16.1 (compiled by hand)

If you need more information, just ask.

-- 
You are receiving this mail because:
You are watching the assignee of the bug.

             reply	other threads:[~2014-08-19 12:18 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-19 12:18 bugzilla-daemon [this message]
2014-08-19 12:58 ` [Bug 82761] DMAR:[fault reason 06] PTE Read access is not set bugzilla-daemon
2014-08-19 16:37 ` bugzilla-daemon
2014-08-19 16:51 ` bugzilla-daemon
2014-08-19 17:28 ` bugzilla-daemon
2014-08-19 21:24 ` bugzilla-daemon
2014-08-19 21:55 ` bugzilla-daemon
2014-08-19 22:18 ` bugzilla-daemon
2014-08-20  7:50 ` bugzilla-daemon
2014-08-21 15:28 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-82761-28872@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@bugzilla.kernel.org \
    --cc=kvm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.