* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
@ 2015-01-01 18:27 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 18:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 18:27 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 529 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #1 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
You haven't really described the issue beyond "not working".
http://nouveau.freedesktop.org/wiki/Optimus/
Where in those instructions do you run into trouble? I would advise against
bumblebee -- nouveau will automatically put the card to sleep if it's not being
used, and bumblebee will only interfere with that.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1294 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
2015-01-01 18:27 ` [Bug 87942] " bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 18:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 18:44 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 18:33 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 874 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #2 from bruno.pagani-vYW+cPY1g1pg9hUCZPvPmw@public.gmane.org ---
Created attachment 111620
--> https://bugs.freedesktop.org/attachment.cgi?id=111620&action=edit
Xorg.8.log
Well, in Bumblebee, this result in the attached Xorg.8.log, this is when trying
to run glxinfo through optirun, and glxinfo works, but the output states this
is not nouveau, but Gallium using LLVM pipe.
With bumblebee and bbswitch disabled, and after clean reboot, the result of
modprobing nouveau is naturally still the same, and I can’t use DRI_PRIME
since:
xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x49 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs:
4 outputs: 6 associated providers: 0 name:Intel
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1694 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
2015-01-01 18:27 ` [Bug 87942] " bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 18:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 18:44 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 19:01 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 18:44 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 869 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #3 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
[151022.040] (EE) NOUVEAU(0): Failed to initialise context object: 2D_NVC0 (0)
[151022.040] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to
NoAccel
Two observations --
(a) nouveau isn't being added as a GPU but rather as a "primary" video card. I
had assumed you had one of the new-fangled optimus situations where the screens
are attached to the igpu and 3d offloading can be done to the secondary gpu --
is that not the case? Using an xorg.conf with Device entries tends to mess all
of that up, btw.
(b) That error should have caused some nasties to be printed to dmesg. I think
I know what they are, but I still want to see them.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1575 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (2 preceding siblings ...)
2015-01-01 18:44 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 19:01 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 19:09 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 19:01 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 4753 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #4 from bruno.pagani-vYW+cPY1g1pg9hUCZPvPmw@public.gmane.org ---
Created attachment 111622
--> https://bugs.freedesktop.org/attachment.cgi?id=111622&action=edit
xorg.conf.nouveau
(In reply to Ilia Mirkin from comment #3)
>
> Two observations --
>
> (a) nouveau isn't being added as a GPU but rather as a "primary" video card.
That is supposed to be the behavior of Bumblebee (two X.org server, one with
the integrated card only, another with the dedicated one only, fired up at
demand, i.e. when you do optirun something), unless I misunderstood something
somewhere.
> I had assumed you had one of the new-fangled optimus situations where the
> screens are attached to the igpu and 3d offloading can be done to the
> secondary gpu -- is that not the case? Using an xorg.conf with Device
> entries tends to mess all of that up, btw.
Indeed, every outputs are attached to my igpu. About xorg.conf files, I have
/etc/bumblebee/xorg.conf.nouveau, which is used by Bumblebee and is attached,
but I’ve also just seen that I have this in /etc/X11/xorg.conf.d/20-intel.conf:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddGPU" "false"
EndSection
I’m going to comment that section and restart X to see if it changes anything
about DRI_PRIME.
> (b) That error should have caused some nasties to be printed to dmesg. I
> think I know what they are, but I still want to see them.
You’re absolutely right, here they are:
On first attempt:
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x418c64 [
IBUS ]
nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419f74 0x00000555 (0x3800820c)
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x41bff8 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000002 FAULT at 0x500914 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0xbadf1008 FAULT at 0x419cc0 [
IBUS ]
nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419cc0 0xbadf1008 (0x3800820c)
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0xbadf1000 FAULT at 0x419eb4 [
IBUS ]
nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x405804 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000 FAULT at 0x405804 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x405804 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000 FAULT at 0x405804 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x405818 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000 FAULT at 0x405818 [
IBUS ]
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x40581c [
IBUS ]
nouveau E[ PIBUS][0000:02:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
nouveau E[ PGRAPH][0000:02:00.0] HUB_INIT timed out
nouveau E[ PGRAPH][0000:02:00.0] 409000 - done 0x00000204
nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000 0x00000000
0x00000000 0x00000000
nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000 0x00000000
0x00000002 0x00000009
nouveau E[ PGRAPH][0000:02:00.0] 502000 - done 0x00000300
nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000 0x00000000
0x00000000 0x00000000
nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000 0x00000000
0x00000000 0x00000000
nouveau E[ PGRAPH][0000:02:00.0] init failed, -16
And next ones are all identical to:
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [
IBUS ]
nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000002 FAULT at 0x405820 [
IBUS ]
nouveau E[ PIBUS][0000:02:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
nouveau E[ PGRAPH][0000:02:00.0] HUB_INIT timed out
nouveau E[ PGRAPH][0000:02:00.0] 409000 - done 0x00000204
nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000 0x00000000
0x00000000 0x00000000
nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000 0x00000000
0x00000002 0x00000009
nouveau E[ PGRAPH][0000:02:00.0] 502000 - done 0x00000300
nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000 0x00000000
0x00000000 0x00000000
nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000 0x00000000
0x00000000 0x00000000
nouveau E[ PGRAPH][0000:02:00.0] init failed, -16
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 5790 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (3 preceding siblings ...)
2015-01-01 19:01 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 19:09 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 19:27 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 19:09 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 4174 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #5 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
(In reply to bruno.pagani from comment #4)
> /etc/X11/xorg.conf.d/20-intel.conf:
>
> Section "ServerLayout"
> Identifier "Layout0"
> Option "AutoAddGPU" "false"
> EndSection
Right, so this will disable adding the nouveau as a "GPU" screen, which means
no prime.
>
> > (b) That error should have caused some nasties to be printed to dmesg. I
> > think I know what they are, but I still want to see them.
>
> You’re absolutely right, here they are:
>
> On first attempt:
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x418880
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x418c64
> [ IBUS ]
> nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419f74 0x00000555 (0x3800820c)
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x41bff8
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000002 FAULT at 0x500914
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000002 FAULT at 0x4188ac
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0xbadf1008 FAULT at 0x419cc0
> [ IBUS ]
> nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419cc0 0xbadf1008 (0x3800820c)
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0xbadf1000 FAULT at 0x419eb4
> [ IBUS ]
> nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x405804
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000 FAULT at 0x405804
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x405804
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000 FAULT at 0x405804
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x405818
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000 FAULT at 0x405818
> [ IBUS ]
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x40581c
> [ IBUS ]
> nouveau E[ PIBUS][0000:02:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
> nouveau E[ PGRAPH][0000:02:00.0] HUB_INIT timed out
> nouveau E[ PGRAPH][0000:02:00.0] 409000 - done 0x00000204
> nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000 0x00000000
> 0x00000000 0x00000000
> nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000 0x00000000
> 0x00000002 0x00000009
> nouveau E[ PGRAPH][0000:02:00.0] 502000 - done 0x00000300
> nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000 0x00000000
> 0x00000000 0x00000000
> nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000 0x00000000
> 0x00000000 0x00000000
> nouveau E[ PGRAPH][0000:02:00.0] init failed, -16
>
> And next ones are all identical to:
>
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT at 0x418880
> [ IBUS ]
> nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419eb4 0xbadf1000 (0x3800820c)
> nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000002 FAULT at 0x405820
> [ IBUS ]
> nouveau E[ PIBUS][0000:02:00.0] HUB0: 0x404170 0x00000012 (0x0e008201)
> nouveau E[ PGRAPH][0000:02:00.0] HUB_INIT timed out
> nouveau E[ PGRAPH][0000:02:00.0] 409000 - done 0x00000204
> nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000 0x00000000
> 0x00000000 0x00000000
> nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000 0x00000000
> 0x00000002 0x00000009
> nouveau E[ PGRAPH][0000:02:00.0] 502000 - done 0x00000300
> nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000 0x00000000
> 0x00000000 0x00000000
> nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000 0x00000000
> 0x00000000 0x00000000
> nouveau E[ PGRAPH][0000:02:00.0] init failed, -16
Yep, those are the errors I was afraid of. Try booting with "nouveau.runpm=0"
-- this will disable the auto-sleep thing I talked about. Not a permanent
solution, but I want to see if that gets things going or not.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 5285 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (4 preceding siblings ...)
2015-01-01 19:09 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 19:27 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 19:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 19:27 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 1927 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #6 from bruno.pagani-vYW+cPY1g1pg9hUCZPvPmw@public.gmane.org ---
cat /proc/cmdline returns nouveau.runpm=0 correctly, but optirun glxinfo is
still failing with the exact same error and:
[ 250.843476] nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT
at 0x418880 [ IBUS ]
[ 250.843564] nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419eb4 0xbadf1000
(0x3800820c)
[ 250.843617] nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000 FAULT
at 0x405804 [ IBUS ]
[ 250.843773] nouveau E[ PIBUS][0000:02:00.0] HUB0: 0x404170 0x00000012
(0x0e008201)
[ 252.845769] nouveau E[ PGRAPH][0000:02:00.0] HUB_INIT timed out
[ 252.845777] nouveau E[ PGRAPH][0000:02:00.0] 409000 - done 0x00000204
[ 252.845787] nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000
0x00000000 0x00000000 0x00000000
[ 252.845796] nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000
0x00000000 0x00000002 0x00000009
[ 252.845799] nouveau E[ PGRAPH][0000:02:00.0] 502000 - done 0x00000300
[ 252.845804] nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000
0x00000000 0x00000000 0x00000000
[ 252.845808] nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000
0x00000000 0x00000000 0x00000000
[ 252.845810] nouveau E[ PGRAPH][0000:02:00.0] init failed, -16
And as for what is concerning PRIME, commenting the AutoAddGPU device didn’t
changed anything, except for Xorg.0.log reporting this obviously:
[ 136.219] (==) Automatically adding GPU devices
It think the issue is somewhere here (from the page you’ve linked):
KMS drivers for both GPUs loaded.
DDX drivers for both GPUs loaded.
nouveau does not load automatically at boot, I need to modprobe it manually. Is
there a way to check or ensure nouveau KMS is loaded?
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 2635 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (5 preceding siblings ...)
2015-01-01 19:27 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 19:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 19:40 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 19:33 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 2345 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #7 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
(In reply to bruno.pagani from comment #6)
> cat /proc/cmdline returns nouveau.runpm=0 correctly, but optirun glxinfo is
> still failing with the exact same error and:
>
> [ 250.843476] nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000
> FAULT at 0x418880 [ IBUS ]
> [ 250.843564] nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419eb4 0xbadf1000
> (0x3800820c)
> [ 250.843617] nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000
> FAULT at 0x405804 [ IBUS ]
> [ 250.843773] nouveau E[ PIBUS][0000:02:00.0] HUB0: 0x404170 0x00000012
> (0x0e008201)
> [ 252.845769] nouveau E[ PGRAPH][0000:02:00.0] HUB_INIT timed out
> [ 252.845777] nouveau E[ PGRAPH][0000:02:00.0] 409000 - done 0x00000204
> [ 252.845787] nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000
> 0x00000000 0x00000000 0x00000000
> [ 252.845796] nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000
> 0x00000000 0x00000002 0x00000009
> [ 252.845799] nouveau E[ PGRAPH][0000:02:00.0] 502000 - done 0x00000300
> [ 252.845804] nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000
> 0x00000000 0x00000000 0x00000000
> [ 252.845808] nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000
> 0x00000000 0x00000000 0x00000000
> [ 252.845810] nouveau E[ PGRAPH][0000:02:00.0] init failed, -16
This means you're not going to get acceleration no matter how hard you try to
change your config, I'm afraid. See bug 70354.
>
> And as for what is concerning PRIME, commenting the AutoAddGPU device didn’t
> changed anything, except for Xorg.0.log reporting this obviously:
> [ 136.219] (==) Automatically adding GPU devices
>
> It think the issue is somewhere here (from the page you’ve linked):
> KMS drivers for both GPUs loaded.
> DDX drivers for both GPUs loaded.
>
> nouveau does not load automatically at boot, I need to modprobe it manually.
> Is there a way to check or ensure nouveau KMS is loaded?
X has to start after nouveau loads, otherwise it doesn't know about the nouveau
adapter. (This may no longer be the case with DRI3-based offloading
actually...)
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 3428 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (6 preceding siblings ...)
2015-01-01 19:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 19:40 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 19:43 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 19:40 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 913 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #8 from bruno.pagani-vYW+cPY1g1pg9hUCZPvPmw@public.gmane.org ---
(In reply to Ilia Mirkin from comment #7)
> This means you're not going to get acceleration no matter how hard you try
> to change your config, I'm afraid. See bug 70354.
>
So in fact PRIME would not be working either?
> X has to start after nouveau loads, otherwise it doesn't know about the
> nouveau adapter. (This may no longer be the case with DRI3-based offloading
> actually...)
Then, is there a way to force nouveau to load at boot, and else, is restarting
X after loading nouveau supposed to work (for the record, tried that, and it
doesn’t work either, but I’m not sure if it is supposed to work since it looks
like I’m indeed affected by the issue you’ve linked).
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1904 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (7 preceding siblings ...)
2015-01-01 19:40 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 19:43 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 21:23 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 19:43 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 1431 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #9 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
(In reply to bruno.pagani from comment #8)
> (In reply to Ilia Mirkin from comment #7)
> > This means you're not going to get acceleration no matter how hard you try
> > to change your config, I'm afraid. See bug 70354.
> >
>
> So in fact PRIME would not be working either?
The GPU's graph unit, responsible for all acceleration, is having trouble
initializing. You would still be able to use reverse-prime though, I think.
(i.e. use the intel gpu to render to screens attached to the nvidia gpu --
sometimes HDMI/etc are that way).
>
> > X has to start after nouveau loads, otherwise it doesn't know about the
> > nouveau adapter. (This may no longer be the case with DRI3-based offloading
> > actually...)
>
> Then, is there a way to force nouveau to load at boot, and else, is
> restarting X after loading nouveau supposed to work (for the record, tried
> that, and it doesn’t work either, but I’m not sure if it is supposed to work
> since it looks like I’m indeed affected by the issue you’ve linked).
Depends on the "it" that you're talking about. You should be seeing
NOUVEAU(GPU-0) messages in your xorg log if you start X after nouveau has
loaded. Do you not?
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 2524 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (8 preceding siblings ...)
2015-01-01 19:43 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 21:23 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-01-01 21:44 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-11-24 16:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 21:23 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 5154 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #10 from bruno.pagani-vYW+cPY1g1pg9hUCZPvPmw@public.gmane.org ---
Created attachment 111625
--> https://bugs.freedesktop.org/attachment.cgi?id=111625&action=edit
Xorg.0.log
(In reply to Ilia Mirkin from comment #9)
> The GPU's graph unit, responsible for all acceleration, is having trouble
> initializing. You would still be able to use reverse-prime though, I think.
> (i.e. use the intel gpu to render to screens attached to the nvidia gpu --
> sometimes HDMI/etc are that way).
OK, but that’s pointless here, I’ve choose this laptop after being sure that
HDMI and mini-DP were wired to the Intel GPU.
> > > X has to start after nouveau loads, otherwise it doesn't know about the
> > > nouveau adapter. (This may no longer be the case with DRI3-based offloading
> > > actually...)
> >
> > Then, is there a way to force nouveau to load at boot, and else, is
> > restarting X after loading nouveau supposed to work (for the record, tried
> > that, and it doesn’t work either, but I’m not sure if it is supposed to work
> > since it looks like I’m indeed affected by the issue you’ve linked).
>
> Depends on the "it" that you're talking about. You should be seeing
> NOUVEAU(GPU-0) messages in your xorg log if you start X after nouveau has
> loaded. Do you not?
I was talking of restarting X after loading nouveau, since I know no way to
force nouveau to load at boot. I wasn’t seeing those lines, but I’ve figured
out it was because of this section of the multiple xorg.conf files:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection
Since I’m currently not needing it (because in my actual configuration it has
no effect, but that’s another story), I commented this out, and it does “work”,
in the sense that I get the attached Xorg.0.log, and obviously the following
lines in dmesg:
[ 6509.306972] nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x00000000 FAULT
at 0x418880 [ IBUS ]
[ 6509.307022] nouveau E[ PIBUS][0000:02:00.0] GPC0: 0x419eb4 0xbadf1000
(0x3800820c)
[ 6509.307071] nouveau E[ PBUS][0000:02:00.0] MMIO write of 0x3f800000 FAULT
at 0x405804 [ IBUS ]
[ 6509.307263] nouveau E[ PIBUS][0000:02:00.0] HUB0: 0x404170 0x00000012
(0x0e008201)
[ 6511.309246] nouveau E[ PGRAPH][0000:02:00.0] HUB_INIT timed out
[ 6511.309254] nouveau E[ PGRAPH][0000:02:00.0] 409000 - done 0x00000204
[ 6511.309263] nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000
0x00000000 0x00000000 0x00000000
[ 6511.309273] nouveau E[ PGRAPH][0000:02:00.0] 409000 - stat 0x00000000
0x00000000 0x00000002 0x00000009
[ 6511.309276] nouveau E[ PGRAPH][0000:02:00.0] 502000 - done 0x00000300
[ 6511.309281] nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000
0x00000000 0x00000000 0x00000000
[ 6511.309285] nouveau E[ PGRAPH][0000:02:00.0] 502000 - stat 0x00000000
0x00000000 0x00000000 0x00000000
[ 6511.309287] nouveau E[ PGRAPH][0000:02:00.0] init failed, -16
Also:
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x69 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs:
4 outputs: 6 associated providers: 0 name:Intel
Provider 1: id: 0x3f cap: 0x5, Source Output, Source Offload crtcs: 0 outputs:
0 associated providers: 0 name:nouveau
But after “xrandr --setprovideroffloadsink nouveau Intel”, “DRI_PRIME=1
glxinfo” results in X.org crashing with:
[ 7519.419] (EE)
[ 7519.419] (EE) Backtrace:
[ 7519.419] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x594276]
[ 7519.419] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x1983c9) [0x5983c9]
[ 7519.419] (EE) 2: /usr/lib/libc.so.6 (0x7f51e163a000+0x33b20)
[0x7f51e166db20]
[ 7519.419] (EE) 3: /usr/bin/Xorg.bin (0x400000+0x1632a4) [0x5632a4]
[ 7519.419] (EE) 4: /usr/bin/Xorg.bin (0x400000+0x1632dd) [0x5632dd]
[ 7519.419] (EE) 5: /usr/bin/Xorg.bin (DRI2Connect+0x3d) [0x56537d]
[ 7519.419] (EE) 6: /usr/bin/Xorg.bin (0x400000+0x16611a) [0x56611a]
[ 7519.419] (EE) 7: /usr/bin/Xorg.bin (0x400000+0x37807) [0x437807]
[ 7519.419] (EE) 8: /usr/bin/Xorg.bin (0x400000+0x3b9a6) [0x43b9a6]
[ 7519.419] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0)
[0x7f51e165a040]
[ 7519.419] (EE) 10: /usr/bin/Xorg.bin (0x400000+0x25dce) [0x425dce]
[ 7519.419] (EE)
[ 7519.419] (EE) Segmentation fault at address 0x28
[ 7519.420] (EE)
Fatal server error:
[ 7519.420] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 7519.420] (EE)
[ 7519.420] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 7519.420] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[ 7519.420] (EE)
[ 7519.420] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 7519.435] (EE) Server terminated with error (1). Closing log file.
So I suppose that now this can be closed and that I should follow on bug 70354.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 6423 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (9 preceding siblings ...)
2015-01-01 21:23 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-01-01 21:44 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-11-24 16:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-01-01 21:44 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 290 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
--- Comment #11 from bruno.pagani-vYW+cPY1g1pg9hUCZPvPmw@public.gmane.org ---
Oh, and thank you for you very quick answers and your help figuring this issue
out!
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 979 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread* [Bug 87942] [NVE7] Unable to use nouveau
[not found] ` <bug-87942-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
` (10 preceding siblings ...)
2015-01-01 21:44 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
@ 2015-11-24 16:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ @ 2015-11-24 16:33 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1.1: Type: text/plain, Size: 624 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=87942
Samuel Pitoiset <samuel.pitoiset-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |DUPLICATE
--- Comment #12 from Samuel Pitoiset <samuel.pitoiset-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
*** This bug has been marked as a duplicate of bug 70354 ***
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 2162 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 13+ messages in thread