From: vitor <Vitor.Soares@synopsys.com>
To: Rob Herring <robh@kernel.org>, Vitor soares <Vitor.Soares@synopsys.com>
Cc: <boris.brezillon@bootlin.com>, <wsa@the-dreams.de>,
<linux-i2c@vger.kernel.org>, <corbet@lwn.net>,
<linux-doc@vger.kernel.org>, <gregkh@linuxfoundation.org>,
<arnd@arndb.de>, <psroka@cadence.com>, <agolec@cadence.com>,
<adouglas@cadence.com>, <bfolta@cadence.com>, <dkos@cadence.com>,
<alicja@cadence.com>, <cwronka@cadence.com>,
<sureshp@cadence.com>, <rafalc@cadence.com>,
<thomas.petazzoni@bootlin.com>, <nm@ti.com>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <geert@linux-m68k.org>,
<linus.walleij@linaro.org>, <Xiang.Lin@synaptics.com>,
<linux-gpio@vger.kernel.org>, <nsekhar@ti.com>,
<pgaj@cadence.com>, <peda@axentia.se>, <Joao.Pinto@synopsys.com>
Subject: Re: [PATCH 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
Date: Wed, 8 Aug 2018 17:59:24 +0100 [thread overview]
Message-ID: <c00cb815-ae82-312a-213b-145537a294bd@synopsys.com> (raw)
In-Reply-To: <20180725195733.GA14450@rob-hp-laptop>
Hi Rob,
On 25-07-2018 20:57, Rob Herring wrote:
> On Fri, Jul 20, 2018 at 09:57:51PM +0100, Vitor soares wrote:
>> This patch document Synopsys DesignWare I3C master DT bindings.
>>
>> Signed-off-by: Vitor soares <soares@synopsys.com>
>> ---
>> .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 43 ++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> new file mode 100644
>> index 0000000..7f5c8b0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> @@ -0,0 +1,43 @@
>> +Bindings for Synopsys DesignWare I3C master block
>> +=================================================
>> +
>> +Required properties:
>> +--------------------
>> +- compatible: shall be "snps,dw-i3c-master"
> Only one version and no version number?
>
> ... and an SoC specific compatible string.
I'm not understanding. Can you explain?
>
>> +- clocks: shall reference the core_clk
>> +- clock-names: shall contain "core_clk"
> "_clk" is redundant and *-names with a single entry is kind of
> pointless.
I will fix it for next version.
>
>> +- interrupts: the interrupt line connected to this I3C master
>> +- reg: Offset and length of I3C master registers
>> +
>> +Mandatory properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- #address-cells: shall be set to 3
>> +- #size-cells: shall be set to 0
>> +
>> +Optional properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- i2c-scl-hz
>> +- i3c-scl-hz
>> +
>> +I3C device connected on the bus follow the generic description (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
>> +
>> +Example:
>> +
>> + i3c-master@0x2000 {
> Drop the '0x'
>
>> + compatible = "snps,dw-i3c-master";
>> + #address-cells = <3>;
>> + #size-cells = <0>;
>> + reg = <0x02000 0x1000>;
>> + interrupts = <0>;
>> + clocks = <&i3cclk>;
>> + clock-names = "core_clk";
>> +
>> + eeprom@0x57{
>> + compatible = "atmel,24c01";
>> + reg = < 0x57 0x80000010 0x0>;
>> + pagesize = <0x8>;
>> + };
>> + };
>> --
>> 2.7.4
>>
>>
Thanks for your feedback.
Best regards,
Vitor Soares
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: vitor <Vitor.Soares@synopsys.com>
To: Rob Herring <robh@kernel.org>, Vitor soares <Vitor.Soares@synopsys.com>
Cc: boris.brezillon@bootlin.com, wsa@the-dreams.de,
linux-i2c@vger.kernel.org, corbet@lwn.net,
linux-doc@vger.kernel.org, gregkh@linuxfoundation.org,
arnd@arndb.de, psroka@cadence.com, agolec@cadence.com,
adouglas@cadence.com, bfolta@cadence.com, dkos@cadence.com,
alicja@cadence.com, cwronka@cadence.com, sureshp@cadence.com,
rafalc@cadence.com, thomas.petazzoni@bootlin.com, nm@ti.com,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
geert@linux-m68k.org, linus.walleij@linaro.org,
Xiang.Lin@synaptics.com, linux-gpio@vger.kernel.org,
nsekhar@ti.com, pgaj@cadence.com, peda@axentia.se,
Joao.Pinto@synopsys.com
Subject: Re: [PATCH 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
Date: Wed, 8 Aug 2018 17:59:24 +0100 [thread overview]
Message-ID: <c00cb815-ae82-312a-213b-145537a294bd@synopsys.com> (raw)
In-Reply-To: <20180725195733.GA14450@rob-hp-laptop>
Hi Rob,
On 25-07-2018 20:57, Rob Herring wrote:
> On Fri, Jul 20, 2018 at 09:57:51PM +0100, Vitor soares wrote:
>> This patch document Synopsys DesignWare I3C master DT bindings.
>>
>> Signed-off-by: Vitor soares <soares@synopsys.com>
>> ---
>> .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 43 ++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> new file mode 100644
>> index 0000000..7f5c8b0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> @@ -0,0 +1,43 @@
>> +Bindings for Synopsys DesignWare I3C master block
>> +=================================================
>> +
>> +Required properties:
>> +--------------------
>> +- compatible: shall be "snps,dw-i3c-master"
> Only one version and no version number?
>
> ... and an SoC specific compatible string.
I'm not understanding. Can you explain?
>
>> +- clocks: shall reference the core_clk
>> +- clock-names: shall contain "core_clk"
> "_clk" is redundant and *-names with a single entry is kind of
> pointless.
I will fix it for next version.
>
>> +- interrupts: the interrupt line connected to this I3C master
>> +- reg: Offset and length of I3C master registers
>> +
>> +Mandatory properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- #address-cells: shall be set to 3
>> +- #size-cells: shall be set to 0
>> +
>> +Optional properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- i2c-scl-hz
>> +- i3c-scl-hz
>> +
>> +I3C device connected on the bus follow the generic description (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
>> +
>> +Example:
>> +
>> + i3c-master@0x2000 {
> Drop the '0x'
>
>> + compatible = "snps,dw-i3c-master";
>> + #address-cells = <3>;
>> + #size-cells = <0>;
>> + reg = <0x02000 0x1000>;
>> + interrupts = <0>;
>> + clocks = <&i3cclk>;
>> + clock-names = "core_clk";
>> +
>> + eeprom@0x57{
>> + compatible = "atmel,24c01";
>> + reg = < 0x57 0x80000010 0x0>;
>> + pagesize = <0x8>;
>> + };
>> + };
>> --
>> 2.7.4
>>
>>
Thanks for your feedback.
Best regards,
Vitor Soares
WARNING: multiple messages have this Message-ID (diff)
From: vitor <Vitor.Soares@synopsys.com>
To: Rob Herring <robh@kernel.org>, Vitor soares <Vitor.Soares@synopsys.com>
Cc: <boris.brezillon@bootlin.com>, <wsa@the-dreams.de>,
<linux-i2c@vger.kernel.org>, <corbet@lwn.net>,
<linux-doc@vger.kernel.org>, <gregkh@linuxfoundation.org>,
<arnd@arndb.de>, <psroka@cadence.com>, <agolec@cadence.com>,
<adouglas@cadence.com>, <bfolta@cadence.com>, <dkos@cadence.com>,
<alicja@cadence.com>, <cwronka@cadence.com>,
<sureshp@cadence.com>, <rafalc@cadence.com>,
<thomas.petazzoni@bootlin.com>, <nm@ti.com>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <geert@linux-m68k.org>,
<linus.walleij@linaro.org>, <Xiang.Lin@synaptics.com>,
<linux-gpio@vger.kernel.org>, <nsekhar@ti.com>,
<pgaj@cadence.com>, <peda@axentia.se>, <Joao.Pinto@synopsys.com>
Subject: Re: [PATCH 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
Date: Wed, 8 Aug 2018 17:59:24 +0100 [thread overview]
Message-ID: <c00cb815-ae82-312a-213b-145537a294bd@synopsys.com> (raw)
In-Reply-To: <20180725195733.GA14450@rob-hp-laptop>
Hi Rob,
On 25-07-2018 20:57, Rob Herring wrote:
> On Fri, Jul 20, 2018 at 09:57:51PM +0100, Vitor soares wrote:
>> This patch document Synopsys DesignWare I3C master DT bindings.
>>
>> Signed-off-by: Vitor soares <soares@synopsys.com>
>> ---
>> .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 43 ++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> new file mode 100644
>> index 0000000..7f5c8b0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> @@ -0,0 +1,43 @@
>> +Bindings for Synopsys DesignWare I3C master block
>> +=================================================
>> +
>> +Required properties:
>> +--------------------
>> +- compatible: shall be "snps,dw-i3c-master"
> Only one version and no version number?
>
> ... and an SoC specific compatible string.
I'm not understanding. Can you explain?
>
>> +- clocks: shall reference the core_clk
>> +- clock-names: shall contain "core_clk"
> "_clk" is redundant and *-names with a single entry is kind of
> pointless.
I will fix it for next version.
>
>> +- interrupts: the interrupt line connected to this I3C master
>> +- reg: Offset and length of I3C master registers
>> +
>> +Mandatory properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- #address-cells: shall be set to 3
>> +- #size-cells: shall be set to 0
>> +
>> +Optional properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- i2c-scl-hz
>> +- i3c-scl-hz
>> +
>> +I3C device connected on the bus follow the generic description (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
>> +
>> +Example:
>> +
>> + i3c-master@0x2000 {
> Drop the '0x'
>
>> + compatible = "snps,dw-i3c-master";
>> + #address-cells = <3>;
>> + #size-cells = <0>;
>> + reg = <0x02000 0x1000>;
>> + interrupts = <0>;
>> + clocks = <&i3cclk>;
>> + clock-names = "core_clk";
>> +
>> + eeprom@0x57{
>> + compatible = "atmel,24c01";
>> + reg = < 0x57 0x80000010 0x0>;
>> + pagesize = <0x8>;
>> + };
>> + };
>> --
>> 2.7.4
>>
>>
Thanks for your feedback.
Best regards,
Vitor Soares
next prev parent reply other threads:[~2018-08-08 16:59 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 20:57 [PATCH 0/3] Add driver for Synopsys DesignWare I3C master IP Vitor soares
2018-07-20 20:57 ` Vitor soares
2018-07-20 20:57 ` [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP Vitor soares
2018-07-20 20:57 ` Vitor soares
2018-07-21 15:35 ` Andy Shevchenko
2018-07-21 15:35 ` Andy Shevchenko
2018-07-21 15:35 ` Andy Shevchenko
2018-07-25 8:43 ` Vitor Soares
2018-07-25 8:43 ` Vitor Soares
2018-07-25 16:56 ` Andy Shevchenko
2018-07-25 16:56 ` Andy Shevchenko
2018-07-25 16:56 ` Andy Shevchenko
2018-08-08 17:01 ` vitor
2018-08-08 17:01 ` vitor
2018-08-08 17:01 ` vitor
2018-07-27 13:38 ` Boris Brezillon
2018-07-27 13:38 ` Boris Brezillon
2018-08-08 17:28 ` vitor
2018-08-08 17:28 ` vitor
2018-08-08 17:28 ` vitor
2018-07-20 20:57 ` [PATCH 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings Vitor soares
2018-07-20 20:57 ` Vitor soares
2018-07-25 19:57 ` Rob Herring
2018-07-25 19:57 ` Rob Herring
2018-08-08 16:59 ` vitor [this message]
2018-08-08 16:59 ` vitor
2018-08-08 16:59 ` vitor
2018-08-13 14:15 ` Rob Herring
2018-08-13 14:15 ` Rob Herring
2018-07-20 20:57 ` [PATCH 3/3] MAINTAINERS: Add myself as the dw-i3c-master module maintainer Vitor soares
2018-07-20 20:57 ` Vitor soares
2018-07-20 21:58 ` [PATCH 0/3] Add driver for Synopsys DesignWare I3C master IP Wolfram Sang
2018-07-21 17:15 ` Boris Brezillon
2018-07-21 17:15 ` Boris Brezillon
2018-07-21 22:59 ` Wolfram Sang
-- strict thread matches above, loose matches on Subject: below --
2018-10-29 10:06 Vitor soares
2018-10-29 10:06 ` [PATCH 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings Vitor soares
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c00cb815-ae82-312a-213b-145537a294bd@synopsys.com \
--to=vitor.soares@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=Xiang.Lin@synaptics.com \
--cc=adouglas@cadence.com \
--cc=agolec@cadence.com \
--cc=alicja@cadence.com \
--cc=arnd@arndb.de \
--cc=bfolta@cadence.com \
--cc=boris.brezillon@bootlin.com \
--cc=corbet@lwn.net \
--cc=cwronka@cadence.com \
--cc=devicetree@vger.kernel.org \
--cc=dkos@cadence.com \
--cc=galak@codeaurora.org \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linus.walleij@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=peda@axentia.se \
--cc=pgaj@cadence.com \
--cc=psroka@cadence.com \
--cc=rafalc@cadence.com \
--cc=robh@kernel.org \
--cc=sureshp@cadence.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.