All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Chao Hao <chao.hao@mediatek.com>, Joerg Roedel <joro@8bytes.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, FY Yang <fy.yang@mediatek.com>,
	wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data
Date: Wed, 17 Jun 2020 11:09:12 +0200	[thread overview]
Message-ID: <c18e7d76-4bd0-51ff-999e-01afd2fa14dc@gmail.com> (raw)
In-Reply-To: <20200617030029.4082-5-chao.hao@mediatek.com>



On 17/06/2020 05:00, Chao Hao wrote:
> For mt6779, MMU_INV_SEL register's offset is changed from
> 0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
> use it.
> In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
> before mt6779.
> 
> Change since v3:
> 1. Fix coding style
> 
> Cc: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>

Reviewed-by: Mattias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/iommu/mtk_iommu.c | 19 +++++++++++--------
>  drivers/iommu/mtk_iommu.h |  1 +
>  2 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 239d2cdbbc9f..f23919feba4e 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -37,7 +37,7 @@
>  #define REG_MMU_INVLD_START_A			0x024
>  #define REG_MMU_INVLD_END_A			0x028
>  
> -#define REG_MMU_INV_SEL				0x038
> +#define REG_MMU_INV_SEL_GEN1			0x038
>  #define F_INVLD_EN0				BIT(0)
>  #define F_INVLD_EN1				BIT(1)
>  
> @@ -168,7 +168,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
>  
>  	for_each_m4u(data) {
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
>  		wmb(); /* Make sure the tlb flush all done */
>  	}
> @@ -185,7 +185,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
>  	for_each_m4u(data) {
>  		spin_lock_irqsave(&data->tlb_lock, flags);
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  
>  		writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
>  		writel_relaxed(iova + size - 1,
> @@ -773,11 +773,12 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
>  };
>  
>  static const struct mtk_iommu_plat_data mt2712_data = {
> -	.m4u_plat     = M4U_MT2712,
> -	.has_4gb_mode = true,
> -	.has_bclk     = true,
> -	.has_vld_pa_rng   = true,
> -	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> +	.m4u_plat       = M4U_MT2712,
> +	.has_4gb_mode   = true,
> +	.has_bclk       = true,
> +	.has_vld_pa_rng = true,
> +	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
> +	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
>  };
>  
>  static const struct mtk_iommu_plat_data mt8173_data = {
> @@ -785,12 +786,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
>  	.has_4gb_mode = true,
>  	.has_bclk     = true,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
>  };
>  
>  static const struct mtk_iommu_plat_data mt8183_data = {
>  	.m4u_plat     = M4U_MT8183,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
>  };
>  
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index d711ac630037..afd7a2de5c1e 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
>  	bool		    has_misc_ctrl;
>  	bool                has_vld_pa_rng;
>  	bool                reset_axi;
> +	u32                 inv_sel_reg;
>  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
>  };
>  
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

WARNING: multiple messages have this Message-ID (diff)
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Chao Hao <chao.hao@mediatek.com>, Joerg Roedel <joro@8bytes.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, FY Yang <fy.yang@mediatek.com>,
	wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org,
	linux-mediatek@lists.infradead.org,
	Yong Wu <yong.wu@mediatek.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data
Date: Wed, 17 Jun 2020 11:09:12 +0200	[thread overview]
Message-ID: <c18e7d76-4bd0-51ff-999e-01afd2fa14dc@gmail.com> (raw)
In-Reply-To: <20200617030029.4082-5-chao.hao@mediatek.com>



On 17/06/2020 05:00, Chao Hao wrote:
> For mt6779, MMU_INV_SEL register's offset is changed from
> 0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
> use it.
> In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
> before mt6779.
> 
> Change since v3:
> 1. Fix coding style
> 
> Cc: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>

Reviewed-by: Mattias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/iommu/mtk_iommu.c | 19 +++++++++++--------
>  drivers/iommu/mtk_iommu.h |  1 +
>  2 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 239d2cdbbc9f..f23919feba4e 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -37,7 +37,7 @@
>  #define REG_MMU_INVLD_START_A			0x024
>  #define REG_MMU_INVLD_END_A			0x028
>  
> -#define REG_MMU_INV_SEL				0x038
> +#define REG_MMU_INV_SEL_GEN1			0x038
>  #define F_INVLD_EN0				BIT(0)
>  #define F_INVLD_EN1				BIT(1)
>  
> @@ -168,7 +168,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
>  
>  	for_each_m4u(data) {
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
>  		wmb(); /* Make sure the tlb flush all done */
>  	}
> @@ -185,7 +185,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
>  	for_each_m4u(data) {
>  		spin_lock_irqsave(&data->tlb_lock, flags);
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  
>  		writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
>  		writel_relaxed(iova + size - 1,
> @@ -773,11 +773,12 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
>  };
>  
>  static const struct mtk_iommu_plat_data mt2712_data = {
> -	.m4u_plat     = M4U_MT2712,
> -	.has_4gb_mode = true,
> -	.has_bclk     = true,
> -	.has_vld_pa_rng   = true,
> -	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> +	.m4u_plat       = M4U_MT2712,
> +	.has_4gb_mode   = true,
> +	.has_bclk       = true,
> +	.has_vld_pa_rng = true,
> +	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
> +	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
>  };
>  
>  static const struct mtk_iommu_plat_data mt8173_data = {
> @@ -785,12 +786,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
>  	.has_4gb_mode = true,
>  	.has_bclk     = true,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
>  };
>  
>  static const struct mtk_iommu_plat_data mt8183_data = {
>  	.m4u_plat     = M4U_MT8183,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
>  };
>  
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index d711ac630037..afd7a2de5c1e 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
>  	bool		    has_misc_ctrl;
>  	bool                has_vld_pa_rng;
>  	bool                reset_axi;
> +	u32                 inv_sel_reg;
>  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
>  };
>  
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Chao Hao <chao.hao@mediatek.com>, Joerg Roedel <joro@8bytes.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org, FY Yang <fy.yang@mediatek.com>,
	wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org,
	linux-mediatek@lists.infradead.org,
	Yong Wu <yong.wu@mediatek.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data
Date: Wed, 17 Jun 2020 11:09:12 +0200	[thread overview]
Message-ID: <c18e7d76-4bd0-51ff-999e-01afd2fa14dc@gmail.com> (raw)
In-Reply-To: <20200617030029.4082-5-chao.hao@mediatek.com>



On 17/06/2020 05:00, Chao Hao wrote:
> For mt6779, MMU_INV_SEL register's offset is changed from
> 0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
> use it.
> In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
> before mt6779.
> 
> Change since v3:
> 1. Fix coding style
> 
> Cc: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>

Reviewed-by: Mattias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/iommu/mtk_iommu.c | 19 +++++++++++--------
>  drivers/iommu/mtk_iommu.h |  1 +
>  2 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 239d2cdbbc9f..f23919feba4e 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -37,7 +37,7 @@
>  #define REG_MMU_INVLD_START_A			0x024
>  #define REG_MMU_INVLD_END_A			0x028
>  
> -#define REG_MMU_INV_SEL				0x038
> +#define REG_MMU_INV_SEL_GEN1			0x038
>  #define F_INVLD_EN0				BIT(0)
>  #define F_INVLD_EN1				BIT(1)
>  
> @@ -168,7 +168,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
>  
>  	for_each_m4u(data) {
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
>  		wmb(); /* Make sure the tlb flush all done */
>  	}
> @@ -185,7 +185,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
>  	for_each_m4u(data) {
>  		spin_lock_irqsave(&data->tlb_lock, flags);
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  
>  		writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
>  		writel_relaxed(iova + size - 1,
> @@ -773,11 +773,12 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
>  };
>  
>  static const struct mtk_iommu_plat_data mt2712_data = {
> -	.m4u_plat     = M4U_MT2712,
> -	.has_4gb_mode = true,
> -	.has_bclk     = true,
> -	.has_vld_pa_rng   = true,
> -	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> +	.m4u_plat       = M4U_MT2712,
> +	.has_4gb_mode   = true,
> +	.has_bclk       = true,
> +	.has_vld_pa_rng = true,
> +	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
> +	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
>  };
>  
>  static const struct mtk_iommu_plat_data mt8173_data = {
> @@ -785,12 +786,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
>  	.has_4gb_mode = true,
>  	.has_bclk     = true,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
>  };
>  
>  static const struct mtk_iommu_plat_data mt8183_data = {
>  	.m4u_plat     = M4U_MT8183,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
>  };
>  
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index d711ac630037..afd7a2de5c1e 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
>  	bool		    has_misc_ctrl;
>  	bool                has_vld_pa_rng;
>  	bool                reset_axi;
> +	u32                 inv_sel_reg;
>  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
>  };
>  
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Chao Hao <chao.hao@mediatek.com>, Joerg Roedel <joro@8bytes.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: iommu@lists.linux-foundation.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, wsd_upstream@mediatek.com,
	Yong Wu <yong.wu@mediatek.com>, FY Yang <fy.yang@mediatek.com>
Subject: Re: [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data
Date: Wed, 17 Jun 2020 11:09:12 +0200	[thread overview]
Message-ID: <c18e7d76-4bd0-51ff-999e-01afd2fa14dc@gmail.com> (raw)
In-Reply-To: <20200617030029.4082-5-chao.hao@mediatek.com>



On 17/06/2020 05:00, Chao Hao wrote:
> For mt6779, MMU_INV_SEL register's offset is changed from
> 0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
> use it.
> In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
> before mt6779.
> 
> Change since v3:
> 1. Fix coding style
> 
> Cc: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>

Reviewed-by: Mattias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/iommu/mtk_iommu.c | 19 +++++++++++--------
>  drivers/iommu/mtk_iommu.h |  1 +
>  2 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 239d2cdbbc9f..f23919feba4e 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -37,7 +37,7 @@
>  #define REG_MMU_INVLD_START_A			0x024
>  #define REG_MMU_INVLD_END_A			0x028
>  
> -#define REG_MMU_INV_SEL				0x038
> +#define REG_MMU_INV_SEL_GEN1			0x038
>  #define F_INVLD_EN0				BIT(0)
>  #define F_INVLD_EN1				BIT(1)
>  
> @@ -168,7 +168,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
>  
>  	for_each_m4u(data) {
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
>  		wmb(); /* Make sure the tlb flush all done */
>  	}
> @@ -185,7 +185,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
>  	for_each_m4u(data) {
>  		spin_lock_irqsave(&data->tlb_lock, flags);
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  
>  		writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
>  		writel_relaxed(iova + size - 1,
> @@ -773,11 +773,12 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
>  };
>  
>  static const struct mtk_iommu_plat_data mt2712_data = {
> -	.m4u_plat     = M4U_MT2712,
> -	.has_4gb_mode = true,
> -	.has_bclk     = true,
> -	.has_vld_pa_rng   = true,
> -	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> +	.m4u_plat       = M4U_MT2712,
> +	.has_4gb_mode   = true,
> +	.has_bclk       = true,
> +	.has_vld_pa_rng = true,
> +	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
> +	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
>  };
>  
>  static const struct mtk_iommu_plat_data mt8173_data = {
> @@ -785,12 +786,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
>  	.has_4gb_mode = true,
>  	.has_bclk     = true,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
>  };
>  
>  static const struct mtk_iommu_plat_data mt8183_data = {
>  	.m4u_plat     = M4U_MT8183,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
>  };
>  
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index d711ac630037..afd7a2de5c1e 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
>  	bool		    has_misc_ctrl;
>  	bool                has_vld_pa_rng;
>  	bool                reset_axi;
> +	u32                 inv_sel_reg;
>  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
>  };
>  
> 

  reply	other threads:[~2020-06-17  9:09 UTC|newest]

Thread overview: 95+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
2020-06-17  3:00 ` Chao Hao
2020-06-17  3:00 ` Chao Hao
2020-06-17  3:00 ` Chao Hao
2020-06-17  3:00 ` [PATCH v4 1/7] dt-bindings: mediatek: Add bindings for MT6779 Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00 ` [PATCH v4 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  9:04   ` Matthias Brugger
2020-06-17  9:04     ` Matthias Brugger
2020-06-17  9:04     ` Matthias Brugger
2020-06-17  9:04     ` Matthias Brugger
2020-06-17  3:00 ` [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  9:34   ` Matthias Brugger
2020-06-17  9:34     ` Matthias Brugger
2020-06-17  9:34     ` Matthias Brugger
2020-06-17  9:34     ` Matthias Brugger
2020-06-18 11:49     ` chao hao
2020-06-18 11:49       ` chao hao
2020-06-18 11:49       ` chao hao
2020-06-18 11:49       ` chao hao
2020-06-20  2:03       ` Yong Wu
2020-06-24  6:39         ` chao hao
2020-06-24  6:39           ` chao hao
2020-06-24  6:39           ` chao hao
2020-06-24  6:39           ` chao hao
2020-06-17  3:00 ` [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  9:09   ` Matthias Brugger [this message]
2020-06-17  9:09     ` Matthias Brugger
2020-06-17  9:09     ` Matthias Brugger
2020-06-17  9:09     ` Matthias Brugger
2020-06-17  3:00 ` [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  9:17   ` Matthias Brugger
2020-06-17  9:17     ` Matthias Brugger
2020-06-17  9:17     ` Matthias Brugger
2020-06-17  9:17     ` Matthias Brugger
2020-06-17 11:11     ` Yong Wu
2020-06-17 11:11       ` Yong Wu
2020-06-17 11:11       ` Yong Wu
2020-06-17 11:11       ` Yong Wu
2020-06-18 11:44       ` chao hao
2020-06-18 11:44         ` chao hao
2020-06-18 11:44         ` chao hao
2020-06-18 11:44         ` chao hao
2020-06-17  3:00 ` [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779 Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  9:22   ` Matthias Brugger
2020-06-17  9:22     ` Matthias Brugger
2020-06-17  9:22     ` Matthias Brugger
2020-06-17  9:22     ` Matthias Brugger
2020-06-19 10:56     ` chao hao
2020-06-19 10:56       ` chao hao
2020-06-19 10:56       ` chao hao
2020-06-19 10:56       ` chao hao
2020-06-21 11:01       ` Matthias Brugger
2020-06-21 11:01         ` Matthias Brugger
2020-06-24  6:36         ` chao hao
2020-06-24  6:36           ` chao hao
2020-06-24  6:36           ` chao hao
2020-06-24  6:36           ` chao hao
2020-06-17  3:00 ` [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  3:00   ` Chao Hao
2020-06-17  9:33   ` Matthias Brugger
2020-06-17  9:33     ` Matthias Brugger
2020-06-17  9:33     ` Matthias Brugger
2020-06-17  9:33     ` Matthias Brugger
2020-06-18 11:54     ` chao hao
2020-06-18 11:54       ` chao hao
2020-06-18 11:54       ` chao hao
2020-06-18 11:54       ` chao hao
2020-06-18 16:00       ` Matthias Brugger
2020-06-18 16:00         ` Matthias Brugger
2020-06-18 16:00         ` Matthias Brugger
2020-06-18 16:00         ` Matthias Brugger
2020-06-19 10:50         ` chao hao
2020-06-19 10:50           ` chao hao
2020-06-19 10:50           ` chao hao
2020-06-19 10:50           ` chao hao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c18e7d76-4bd0-51ff-999e-01afd2fa14dc@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=chao.hao@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fy.yang@mediatek.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=wsd_upstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.