* [U-Boot-Users] Programming 28F640J3 flash on ARM Integrator CP gets timeout
@ 2004-10-06 0:41 Shawn
0 siblings, 0 replies; only message in thread
From: Shawn @ 2004-10-06 0:41 UTC (permalink / raw)
To: u-boot
Hi,
I use the ported ARM Integrator CP board and modified the flash part
to support the new flash chip Intel StrataFlash 28F640J3. When
programming the Flash with a big chunk of data (hundreds of KB or MB),
it very often gets timeout. I changed the timeout value to a big numer
(10 times of the original value), but it didn't help. I don't see the
issue is related to the software. What else will cause this problem?
I printed the status when programming or erasing gets timeout.
Sometimes it shows low programming voltage detected (SR.3 == 1).
Any hints are appreciated.
-Shawn.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-10-06 0:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-06 0:41 [U-Boot-Users] Programming 28F640J3 flash on ARM Integrator CP gets timeout Shawn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.