From: Embedded System <embed.sys@gmail.com>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Can't init device hci0 (all information included), help! Thanx a lot!!!
Date: Sun, 23 Jan 2005 18:10:50 +0800 [thread overview]
Message-ID: <c93f2a2905012302107465ea43@mail.gmail.com> (raw)
hi, everyone
when I call "hciconfig hci0 up", it prints:
Can't init device hci0: Connection timed out (110)
Working environment is as follows:
1, Vmware workstation 5.0 + Redhat 9.0, with kernel 2.6.8.1, bluez 2.14
2, Bluetooth subsystem enabled
3, Billionton BlueTooth Dongle Class I USBBTC1A
4, "/etc/rc.d/init.d/bluetooth start" already run
Outputs (lspci, lsmod, /proc/bus/usb/devices/,hciconfig, dmesg)
1, output from lspci
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB
2, output from lsmod
Module Size Used by
ehci_hcd 42688 0
hci_usb 13184 0
rfcomm 38712 0
l2cap 24128 3 rfcomm
autofs 15520 0
ohci1394 34912 0
ieee1394 110384 1 ohci1394
parport_pc 25696 0
parport 40672 1 parport_pc
bluetooth 48292 3 hci_usb,rfcomm,l2cap
usbhid 24800 0
uhci_hcd 33160 0
usbcore 127540 6 ehci_hcd,hci_usb,usbhid,uhci_hcd
3, output from /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8.1 uhci_hcd
S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB
S: SerialNumber=0000:00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a12 ProdID=0001 Rev= 4.87
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
4, output from hciconfig
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DH1 HV1
Link policy:
Link mode: SLAVE ACCEPT
8, output from dmesg
uhci_hcd 0000:00:07.2: suspend_hc
uhci_hcd 0000:00:07.2: wakeup_hc
uhci_hcd 0000:00:07.2: port 1 portsc 0083
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 1-1: new full speed USB device using address 3
usb 1-1: skipped 1 descriptor after interface
usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
hci_usb 1-1:1.0: usb_probe_interface
hci_usb 1-1:1.0: usb_probe_interface - got id
usb 1-1: adding 1-1:1.1 (config #1, interface 1)
usb 1-1:1.1: hotplug
usb 1-1: adding 1-1:1.2 (config #1, interface 2)
usb 1-1:1.2: hotplug
hci_usb 1-1:1.2: usb_probe_interface
hci_usb 1-1:1.2: usb_probe_interface - got id
I really appreciate your kindly help and your time! if you need any
further information
please let me know, thanx again!
Is it a kernel problem? Bluez bug? Configuration Problem? Vmware
Restrictions? or what else?
-andy
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2005-01-23 10:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-23 10:10 Embedded System [this message]
2005-01-23 17:14 ` [Bluez-users] Can't init device hci0 (all information included), help! Thanx a lot!!! Marcel Holtmann
2005-01-24 3:54 ` Embedded System
2005-01-24 8:19 ` Michal Semler
2005-01-24 10:05 ` Embedded System
2005-01-24 12:22 ` Marcel Holtmann
2005-01-25 15:23 ` Embedded System
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c93f2a2905012302107465ea43@mail.gmail.com \
--to=embed.sys@gmail.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.