* [ALSA - driver 0001998]: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't supported?
@ 2006-04-03 16:45 bugtrack
0 siblings, 0 replies; 4+ messages in thread
From: bugtrack @ 2006-04-03 16:45 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1998>
======================================================================
Reported By: pmn
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1998
Category: PCI - emu10k1
Reproducibility: always
Severity: feature
Priority: normal
Status: new
Distribution: Gentoo
Kernel Version: 2.6.16
======================================================================
Date Submitted: 04-03-2006 13:34 CEST
Last Modified: 04-03-2006 18:45 CEST
======================================================================
Summary: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't
supported?
Description:
If I have understood right this card should be able to decode AC3/DD by
itself when sent into SPDIF/IN...
Well Sending AC3/DD signal to card's SPDIF/IN results in crackling noise
from my 7.1 analog speakers that are connected to card. Sending PCM into
SPDIF/IN works fine, but it would be nice to get AC3 (and by that way DD
sounds) alive and kicking.
Am I doing something wrong or is it just that emu10k1 doesn't support
Audigy2ZS's hardware AC3 decoder? If so please tell me what I am
doing/have understood wrong or are there any plans to get hardware AC3
decoder to work?
======================================================================
----------------------------------------------------------------------
pzad - 04-03-06 17:18
----------------------------------------------------------------------
Are you sure Audigy 2 ZS has hardware ac3 decoder (AFAIK there is none) ?
AFAIK ac3 spdif input is not suported for now.
----------------------------------------------------------------------
rlrevell - 04-03-06 18:45
----------------------------------------------------------------------
These devices have no hardware AC3 decoder - Creative is lying. It's
implemented in software in the Windows driver.
Issue History
Date Modified Username Field Change
======================================================================
04-03-06 13:34 pmn New Issue
04-03-06 13:34 pmn Distribution => Gentoo
04-03-06 13:34 pmn Kernel Version => 2.6.16
04-03-06 17:18 pzad Note Added: 0009100
04-03-06 18:45 rlrevell Note Added: 0009101
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ALSA - driver 0001998]: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't supported?
@ 2006-04-03 16:59 bugtrack
0 siblings, 0 replies; 4+ messages in thread
From: bugtrack @ 2006-04-03 16:59 UTC (permalink / raw)
To: alsa-devel
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1998>
======================================================================
Reported By: pmn
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1998
Category: PCI - emu10k1
Reproducibility: always
Severity: feature
Priority: normal
Status: closed
Distribution: Gentoo
Kernel Version: 2.6.16
Resolution: open
Fixed in Version:
======================================================================
Date Submitted: 04-03-2006 13:34 CEST
Last Modified: 04-03-2006 18:59 CEST
======================================================================
Summary: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't
supported?
Description:
If I have understood right this card should be able to decode AC3/DD by
itself when sent into SPDIF/IN...
Well Sending AC3/DD signal to card's SPDIF/IN results in crackling noise
from my 7.1 analog speakers that are connected to card. Sending PCM into
SPDIF/IN works fine, but it would be nice to get AC3 (and by that way DD
sounds) alive and kicking.
Am I doing something wrong or is it just that emu10k1 doesn't support
Audigy2ZS's hardware AC3 decoder? If so please tell me what I am
doing/have understood wrong or are there any plans to get hardware AC3
decoder to work?
======================================================================
----------------------------------------------------------------------
rlrevell - 04-03-06 18:45
----------------------------------------------------------------------
These devices have no hardware AC3 decoder - Creative is lying. It's
implemented in software in the Windows driver.
----------------------------------------------------------------------
rlrevell - 04-03-06 18:59
----------------------------------------------------------------------
Hardware has no AC3 decoder. You can do it in software by piping the input
to ac3dec.
Issue History
Date Modified Username Field Change
======================================================================
04-03-06 13:34 pmn New Issue
04-03-06 13:34 pmn Distribution => Gentoo
04-03-06 13:34 pmn Kernel Version => 2.6.16
04-03-06 17:18 pzad Note Added: 0009100
04-03-06 18:45 rlrevell Note Added: 0009101
04-03-06 18:59 rlrevell Status new => closed
04-03-06 18:59 rlrevell Note Added: 0009102
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ALSA - driver 0001998]: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't supported?
@ 2006-04-03 15:18 bugtrack
0 siblings, 0 replies; 4+ messages in thread
From: bugtrack @ 2006-04-03 15:18 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1998>
======================================================================
Reported By: pmn
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1998
Category: PCI - emu10k1
Reproducibility: always
Severity: feature
Priority: normal
Status: new
Distribution: Gentoo
Kernel Version: 2.6.16
======================================================================
Date Submitted: 04-03-2006 13:34 CEST
Last Modified: 04-03-2006 17:18 CEST
======================================================================
Summary: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't
supported?
Description:
If I have understood right this card should be able to decode AC3/DD by
itself when sent into SPDIF/IN...
Well Sending AC3/DD signal to card's SPDIF/IN results in crackling noise
from my 7.1 analog speakers that are connected to card. Sending PCM into
SPDIF/IN works fine, but it would be nice to get AC3 (and by that way DD
sounds) alive and kicking.
Am I doing something wrong or is it just that emu10k1 doesn't support
Audigy2ZS's hardware AC3 decoder? If so please tell me what I am
doing/have understood wrong or are there any plans to get hardware AC3
decoder to work?
======================================================================
----------------------------------------------------------------------
pzad - 04-03-06 17:18
----------------------------------------------------------------------
Are you sure Audigy 2 ZS has hardware ac3 decoder (AFAIK there is none) ?
AFAIK ac3 spdif input is not suported for now.
Issue History
Date Modified Username Field Change
======================================================================
04-03-06 13:34 pmn New Issue
04-03-06 13:34 pmn Distribution => Gentoo
04-03-06 13:34 pmn Kernel Version => 2.6.16
04-03-06 17:18 pzad Note Added: 0009100
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ALSA - driver 0001998]: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't supported?
@ 2006-04-03 11:34 bugtrack
0 siblings, 0 replies; 4+ messages in thread
From: bugtrack @ 2006-04-03 11:34 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1998>
======================================================================
Reported By: pmn
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1998
Category: PCI - emu10k1
Reproducibility: always
Severity: feature
Priority: normal
Status: new
Distribution: Gentoo
Kernel Version: 2.6.16
======================================================================
Date Submitted: 04-03-2006 13:34 CEST
Last Modified: 04-03-2006 13:34 CEST
======================================================================
Summary: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't
supported?
Description:
If I have understood right this card should be able to decode AC3/DD by
itself when sent into SPDIF/IN...
Well Sending AC3/DD signal to card's SPDIF/IN results in crackling noise
from my 7.1 analog speakers that are connected to card. Sending PCM into
SPDIF/IN works fine, but it would be nice to get AC3 (and by that way DD
sounds) alive and kicking.
Am I doing something wrong or is it just that emu10k1 doesn't support
Audigy2ZS's hardware AC3 decoder? If so please tell me what I am
doing/have understood wrong or are there any plans to get hardware AC3
decoder to work?
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
04-03-06 13:34 pmn New Issue
04-03-06 13:34 pmn Distribution => Gentoo
04-03-06 13:34 pmn Kernel Version => 2.6.16
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-04-03 16:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-04-03 16:45 [ALSA - driver 0001998]: Audigy 2 ZS Platinum's hardware AC3/DD decoder isn't supported? bugtrack
-- strict thread matches above, loose matches on Subject: below --
2006-04-03 16:59 bugtrack
2006-04-03 15:18 bugtrack
2006-04-03 11:34 bugtrack
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.