[PATCH 0/5] drivers/net/mac8390 cleanups

[PATCH 0/5] drivers/net/mac8390 cleanups

[Joe Perches]

Collection of trivial cleanups to mac8390
Uncompiled (no cross-compiler)
No hardware to verify

Joe Perches (5):
  drivers/net/mac8390.c: Indent case labels
  drivers/net/mac8390.c: Remove useless memcpy casting
  drivers/net/mac8390.c: Convert printk(KERN_<level> to pr_<level>(
  drivers/net/mac8390.c: Checkpatch cleanups
  drivers/net/mac8390.c: Add mac8390_init function

 drivers/net/mac8390.c |  632 +++++++++++++++++++++++++------------------------
 1 files changed, 322 insertions(+), 310 deletions(-)

[PATCH 1/5] drivers/net/mac8390.c: Indent case labels

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/mac8390.c |  252 ++++++++++++++++++++++++------------------------
 1 files changed, 126 insertions(+), 126 deletions(-)

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index f8fa0c3..6b6f375 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -164,70 +164,70 @@ static void word_memcpy_fromcard(void *tp, const void *fp, int count);
 static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev)
 {
 	switch (dev->dr_sw) {
-		case NUBUS_DRSW_3COM:
-			switch (dev->dr_hw) {
-				case NUBUS_DRHW_APPLE_SONIC_NB:
-				case NUBUS_DRHW_APPLE_SONIC_LC:
-				case NUBUS_DRHW_SONNET:
-					return MAC8390_NONE;
-					break;
-				default:
-					return MAC8390_APPLE;
-					break;
-			}
+	case NUBUS_DRSW_3COM:
+		switch (dev->dr_hw) {
+		case NUBUS_DRHW_APPLE_SONIC_NB:
+		case NUBUS_DRHW_APPLE_SONIC_LC:
+		case NUBUS_DRHW_SONNET:
+			return MAC8390_NONE;
 			break;
-
-		case NUBUS_DRSW_APPLE:
-			switch (dev->dr_hw) {
-				case NUBUS_DRHW_ASANTE_LC:
-					return MAC8390_NONE;
-					break;
-				case NUBUS_DRHW_CABLETRON:
-					return MAC8390_CABLETRON;
-					break;
-				default:
-					return MAC8390_APPLE;
-					break;
-			}
+		default:
+			return MAC8390_APPLE;
 			break;
+		}
+		break;
 
-		case NUBUS_DRSW_ASANTE:
-			return MAC8390_ASANTE;
+	case NUBUS_DRSW_APPLE:
+		switch (dev->dr_hw) {
+		case NUBUS_DRHW_ASANTE_LC:
+			return MAC8390_NONE;
 			break;
-
-		case NUBUS_DRSW_TECHWORKS:
-		case NUBUS_DRSW_DAYNA2:
-		case NUBUS_DRSW_DAYNA_LC:
-			if (dev->dr_hw == NUBUS_DRHW_CABLETRON)
-				return MAC8390_CABLETRON;
-			else
-				return MAC8390_APPLE;
+		case NUBUS_DRHW_CABLETRON:
+			return MAC8390_CABLETRON;
 			break;
-
-		case NUBUS_DRSW_FARALLON:
-			return MAC8390_FARALLON;
+		default:
+			return MAC8390_APPLE;
 			break;
+		}
+		break;
 
-		case NUBUS_DRSW_KINETICS:
-			switch (dev->dr_hw) {
-				case NUBUS_DRHW_INTERLAN:
-					return MAC8390_INTERLAN;
-					break;
-				default:
-					return MAC8390_KINETICS;
-					break;
-			}
-			break;
+	case NUBUS_DRSW_ASANTE:
+		return MAC8390_ASANTE;
+		break;
+
+	case NUBUS_DRSW_TECHWORKS:
+	case NUBUS_DRSW_DAYNA2:
+	case NUBUS_DRSW_DAYNA_LC:
+		if (dev->dr_hw == NUBUS_DRHW_CABLETRON)
+			return MAC8390_CABLETRON;
+		else
+			return MAC8390_APPLE;
+		break;
+
+	case NUBUS_DRSW_FARALLON:
+		return MAC8390_FARALLON;
+		break;
 
-		case NUBUS_DRSW_DAYNA:
-			// These correspond to Dayna Sonic cards
-			// which use the macsonic driver
-			if (dev->dr_hw == NUBUS_DRHW_SMC9194 ||
-				dev->dr_hw == NUBUS_DRHW_INTERLAN )
-				return MAC8390_NONE;
-			else
-				return MAC8390_DAYNA;
+	case NUBUS_DRSW_KINETICS:
+		switch (dev->dr_hw) {
+		case NUBUS_DRHW_INTERLAN:
+			return MAC8390_INTERLAN;
 			break;
+		default:
+			return MAC8390_KINETICS;
+			break;
+		}
+		break;
+
+	case NUBUS_DRSW_DAYNA:
+		// These correspond to Dayna Sonic cards
+		// which use the macsonic driver
+		if (dev->dr_hw == NUBUS_DRHW_SMC9194 ||
+		    dev->dr_hw == NUBUS_DRHW_INTERLAN )
+			return MAC8390_NONE;
+		else
+			return MAC8390_DAYNA;
+		break;
 	}
 	return MAC8390_NONE;
 }
@@ -373,54 +373,54 @@ struct net_device * __init mac8390_probe(int unit)
 			dev->mem_end = dev->mem_start + offset;
 		} else {
 			switch (cardtype) {
-				case MAC8390_KINETICS:
-				case MAC8390_DAYNA: /* it's the same */
-					dev->base_addr =
-						(int)(ndev->board->slot_addr +
-						DAYNA_8390_BASE);
-					dev->mem_start =
-						(int)(ndev->board->slot_addr +
-						DAYNA_8390_MEM);
-					dev->mem_end =
-						dev->mem_start +
-						mac8390_memsize(dev->mem_start);
-					break;
-				case MAC8390_INTERLAN:
-					dev->base_addr =
-						(int)(ndev->board->slot_addr +
-						INTERLAN_8390_BASE);
-					dev->mem_start =
-						(int)(ndev->board->slot_addr +
-						INTERLAN_8390_MEM);
-					dev->mem_end =
-						dev->mem_start +
-						mac8390_memsize(dev->mem_start);
-					break;
-				case MAC8390_CABLETRON:
-					dev->base_addr =
-						(int)(ndev->board->slot_addr +
-						CABLETRON_8390_BASE);
-					dev->mem_start =
-						(int)(ndev->board->slot_addr +
-						CABLETRON_8390_MEM);
-					/* The base address is unreadable if 0x00
-					 * has been written to the command register
-					 * Reset the chip by writing E8390_NODMA +
-					 *   E8390_PAGE0 + E8390_STOP just to be
-					 *   sure
-					 */
-					i = (void *)dev->base_addr;
-					*i = 0x21;
-					dev->mem_end =
-						dev->mem_start +
-						mac8390_memsize(dev->mem_start);
-					break;
-
-				default:
-					printk(KERN_ERR "Card type %s is"
-					       " unsupported, sorry\n",
-					       ndev->board->name);
-					continue;
+			case MAC8390_KINETICS:
+			case MAC8390_DAYNA: /* it's the same */
+				dev->base_addr =
+					(int)(ndev->board->slot_addr +
+					      DAYNA_8390_BASE);
+				dev->mem_start =
+					(int)(ndev->board->slot_addr +
+					      DAYNA_8390_MEM);
+				dev->mem_end =
+					dev->mem_start +
+					mac8390_memsize(dev->mem_start);
+				break;
+			case MAC8390_INTERLAN:
+				dev->base_addr =
+					(int)(ndev->board->slot_addr +
+					      INTERLAN_8390_BASE);
+				dev->mem_start =
+					(int)(ndev->board->slot_addr +
+					      INTERLAN_8390_MEM);
+				dev->mem_end =
+					dev->mem_start +
+					mac8390_memsize(dev->mem_start);
+				break;
+			case MAC8390_CABLETRON:
+				dev->base_addr =
+					(int)(ndev->board->slot_addr +
+					      CABLETRON_8390_BASE);
+				dev->mem_start =
+					(int)(ndev->board->slot_addr +
+					      CABLETRON_8390_MEM);
+				/* The base address is unreadable if 0x00
+				 * has been written to the command register
+				 * Reset the chip by writing E8390_NODMA +
+				 *   E8390_PAGE0 + E8390_STOP just to be
+				 *   sure
+				 */
+				i = (void *)dev->base_addr;
+				*i = 0x21;
+				dev->mem_end =
+					dev->mem_start +
+					mac8390_memsize(dev->mem_start);
+				break;
+
+			default:
+				printk(KERN_ERR "Card type %s is"
+				       " unsupported, sorry\n",
+				       ndev->board->name);
+				continue;
 			}
 		}
 
@@ -540,33 +540,33 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 	}
 
 	/* Fill in model-specific information and functions */
-	switch(type) {
+	switch (type) {
 	case MAC8390_FARALLON:
 	case MAC8390_APPLE:
-		switch(mac8390_testio(dev->mem_start)) {
-			case ACCESS_UNKNOWN:
-				printk("Don't know how to access card memory!\n");
-				return -ENODEV;
-				break;
+		switch (mac8390_testio(dev->mem_start)) {
+		case ACCESS_UNKNOWN:
+			printk("Don't know how to access card memory!\n");
+			return -ENODEV;
+			break;
 
-			case ACCESS_16:
-				/* 16 bit card, register map is reversed */
-				ei_status.reset_8390 = &mac8390_no_reset;
-				ei_status.block_input = &slow_sane_block_input;
-				ei_status.block_output = &slow_sane_block_output;
-				ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
-				ei_status.reg_offset = back4_offsets;
-				break;
+		case ACCESS_16:
+			/* 16 bit card, register map is reversed */
+			ei_status.reset_8390 = &mac8390_no_reset;
+			ei_status.block_input = &slow_sane_block_input;
+			ei_status.block_output = &slow_sane_block_output;
+			ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
+			ei_status.reg_offset = back4_offsets;
+			break;
 
-			case ACCESS_32:
-				/* 32 bit card, register map is reversed */
-				ei_status.reset_8390 = &mac8390_no_reset;
-				ei_status.block_input = &sane_block_input;
-				ei_status.block_output = &sane_block_output;
-				ei_status.get_8390_hdr = &sane_get_8390_hdr;
-				ei_status.reg_offset = back4_offsets;
-				access_bitmode = 1;
-				break;
+		case ACCESS_32:
+			/* 32 bit card, register map is reversed */
+			ei_status.reset_8390 = &mac8390_no_reset;
+			ei_status.block_input = &sane_block_input;
+			ei_status.block_output = &sane_block_output;
+			ei_status.get_8390_hdr = &sane_get_8390_hdr;
+			ei_status.reg_offset = back4_offsets;
+			access_bitmode = 1;
+			break;
 		}
 		break;
 
-- 
1.6.6.rc0.57.gad7a

[PATCH 2/5] drivers/net/mac8390.c: Remove useless memcpy casting

[Joe Perches]

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/mac8390.c |   19 ++++++++++---------
 1 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 6b6f375..517cee4 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -237,14 +237,14 @@ static enum mac8390_access __init mac8390_testio(volatile unsigned long membase)
 	unsigned long outdata = 0xA5A0B5B0;
 	unsigned long indata =  0x00000000;
 	/* Try writing 32 bits */
-	memcpy((char *)membase, (char *)&outdata, 4);
+	memcpy(membase, &outdata, 4);
 	/* Now compare them */
 	if (memcmp((char *)&outdata, (char *)membase, 4) == 0)
 		return ACCESS_32;
 	/* Write 16 bit output */
-	word_memcpy_tocard((char *)membase, (char *)&outdata, 4);
+	word_memcpy_tocard(membase, &outdata, 4);
 	/* Now read it back */
-	word_memcpy_fromcard((char *)&indata, (char *)membase, 4);
+	word_memcpy_fromcard(&indata, membase, 4);
 	if (outdata == indata)
 		return ACCESS_16;
 	return ACCESS_UNKNOWN;
@@ -759,7 +759,7 @@ static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr
 {
 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
 
-	dayna_memcpy_fromcard(dev, (void *)hdr, hdr_start, 4);
+	dayna_memcpy_fromcard(dev, hdr, hdr_start, 4);
 	/* Fix endianness */
 	hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8);
 }
@@ -801,7 +801,7 @@ static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr
 	int ring_page)
 {
 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
-	word_memcpy_fromcard((void *)hdr, (char *)dev->mem_start+hdr_start, 4);
+	word_memcpy_fromcard(hdr, (char *)dev->mem_start + hdr_start, 4);
 	/* Register endianism - fix here rather than 8390.c */
 	hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8);
 }
@@ -816,16 +816,17 @@ static void slow_sane_block_input(struct net_device *dev, int count, struct sk_b
 	{
 		/* We must wrap the input move. */
 		int semi_count = ei_status.rmem_end - xfer_start;
-		word_memcpy_fromcard(skb->data, (char *)dev->mem_start +
-			xfer_base, semi_count);
+		word_memcpy_fromcard(skb->data,
+				     (char *)dev->mem_start + xfer_base,
+				     semi_count);
 		count -= semi_count;
 		word_memcpy_fromcard(skb->data + semi_count,
 				     (char *)ei_status.rmem_start, count);
 	}
 	else
 	{
-		word_memcpy_fromcard(skb->data, (char *)dev->mem_start +
-			xfer_base, count);
+		word_memcpy_fromcard(skb->data,
+				     (char *)dev->mem_start + xfer_base, count);
 	}
 }
 
-- 
1.6.6.rc0.57.gad7a

[PATCH 3/5] drivers/net/mac8390.c: Convert printk(KERN_<level> to pr_<level>(

[Joe Perches]

Use printk_once
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert printks without KERN_<level> to pr_info and pr_cont

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/mac8390.c |   57 +++++++++++++++++++++---------------------------
 1 files changed, 25 insertions(+), 32 deletions(-)

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 517cee4..8bd09e2 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -17,6 +17,8 @@
 /* 2002-12-30: Try to support more cards, some clues from NetBSD driver */
 /* 2003-12-26: Make sure Asante cards always work. */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -42,7 +44,7 @@
 #include <asm/macints.h>
 
 static char version[] =
-	"mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
+	"v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
 
 #define EI_SHIFT(x)	(ei_local->reg_offset[x])
 #define ei_inb(port)   in_8(port)
@@ -288,7 +290,6 @@ struct net_device * __init mac8390_probe(int unit)
 {
 	struct net_device *dev;
 	volatile unsigned short *i;
-	int version_disp = 0;
 	struct nubus_dev * ndev = NULL;
 	int err = -ENODEV;
 
@@ -320,10 +321,7 @@ struct net_device * __init mac8390_probe(int unit)
 		if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE)
 			continue;
 
-		if (version_disp == 0) {
-			version_disp = 1;
-			printk(version);
-		}
+		printk_once(KERN_INFO pr_fmt(version));
 
 		dev->irq = SLOT2IRQ(ndev->board->slot);
 		/* This is getting to be a habit */
@@ -333,16 +331,14 @@ struct net_device * __init mac8390_probe(int unit)
 		   of where its memory and registers are. */
 
 		if (nubus_get_func_dir(ndev, &dir) == -1) {
-			printk(KERN_ERR "%s: Unable to get Nubus functional"
-					" directory for slot %X!\n",
+			pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
 			       dev->name, ndev->board->slot);
 			continue;
 		}
 
 		/* Get the MAC address */
 		if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) {
-			printk(KERN_INFO "%s: Couldn't get MAC address!\n",
-					dev->name);
+			pr_info("%s: Couldn't get MAC address!\n", dev->name);
 			continue;
 		} else {
 			nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
@@ -351,8 +347,7 @@ struct net_device * __init mac8390_probe(int unit)
 		if (useresources[cardtype] == 1) {
 			nubus_rewinddir(&dir);
 			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) {
-				printk(KERN_ERR "%s: Memory offset resource"
-						" for slot %X not found!\n",
+				pr_err("%s: Memory offset resource for slot %X not found!\n",
 				       dev->name, ndev->board->slot);
 				continue;
 			}
@@ -362,10 +357,8 @@ struct net_device * __init mac8390_probe(int unit)
 			dev->base_addr = dev->mem_start + 0x10000;
 			nubus_rewinddir(&dir);
 			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) {
-				printk(KERN_INFO "%s: Memory length resource"
-						 " for slot %X not found"
-						 ", probing\n",
-				       dev->name, ndev->board->slot);
+				pr_info("%s: Memory length resource for slot %X not found, probing\n",
+					dev->name, ndev->board->slot);
 				offset = mac8390_memsize(dev->mem_start);
 				} else {
 					nubus_get_rsrc_mem(&offset, &ent, 4);
@@ -417,8 +410,7 @@ struct net_device * __init mac8390_probe(int unit)
 				break;
 
 			default:
-				printk(KERN_ERR "Card type %s is"
-				       " unsupported, sorry\n",
+				pr_err("Card type %s is unsupported, sorry\n",
 				       ndev->board->name);
 				continue;
 			}
@@ -458,7 +450,7 @@ int init_module(void)
 		dev_mac890[i] = dev;
 	}
 	if (!i) {
-		printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n");
+		pr_notice("No useable cards found, driver NOT installed.\n");
 		return -ENODEV;
 	}
 	return 0;
@@ -545,7 +537,7 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 	case MAC8390_APPLE:
 		switch (mac8390_testio(dev->mem_start)) {
 		case ACCESS_UNKNOWN:
-			printk("Don't know how to access card memory!\n");
+			pr_info("Don't know how to access card memory!\n");
 			return -ENODEV;
 			break;
 
@@ -612,20 +604,21 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 	        break;
 
 	default:
-		printk(KERN_ERR "Card type %s is unsupported, sorry\n", ndev->board->name);
+		pr_err("Card type %s is unsupported, sorry\n",
+		       ndev->board->name);
 		return -ENODEV;
 	}
 
 	__NS8390_init(dev, 0);
 
 	/* Good, done, now spit out some messages */
-	printk(KERN_INFO "%s: %s in slot %X (type %s)\n",
-	       dev->name, ndev->board->name, ndev->board->slot, cardname[type]);
-	printk(KERN_INFO
-	       "MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
-	       dev->dev_addr, dev->irq,
-	       (unsigned int)(dev->mem_end - dev->mem_start) >> 10,
-	       dev->mem_start, access_bitmode ? 32 : 16);
+	pr_info("%s: %s in slot %X (type %s)\n",
+		dev->name, ndev->board->name, ndev->board->slot,
+		cardname[type]);
+	pr_info("MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
+		dev->dev_addr, dev->irq,
+		(unsigned int)(dev->mem_end - dev->mem_start) >> 10,
+		dev->mem_start, access_bitmode ? 32 : 16);
 	return 0;
 }
 
@@ -633,7 +626,7 @@ static int mac8390_open(struct net_device *dev)
 {
 	__ei_open(dev);
 	if (request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev)) {
-		printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
+		pr_info("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
 		return -EAGAIN;
 	}
 	return 0;
@@ -650,7 +643,7 @@ static void mac8390_no_reset(struct net_device *dev)
 {
 	ei_status.txing = 0;
 	if (ei_debug > 1)
-		printk("reset not supported\n");
+		pr_info("reset not supported\n");
 	return;
 }
 
@@ -658,11 +651,11 @@ static void interlan_reset(struct net_device *dev)
 {
 	unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq));
 	if (ei_debug > 1)
-		printk("Need to reset the NS8390 t=%lu...", jiffies);
+		pr_info("Need to reset the NS8390 t=%lu...", jiffies);
 	ei_status.txing = 0;
 	target[0xC0000] = 0;
 	if (ei_debug > 1)
-		printk("reset complete\n");
+		pr_cont("reset complete\n");
 	return;
 }
 
-- 
1.6.6.rc0.57.gad7a

[PATCH 4/5] drivers/net/mac8390.c: Checkpatch cleanups

[Joe Perches]

Use #include <linux/ not #include <asm/
Add spaces after arguments
Comment neatening
Make a couple of arrays static const
Align function arguments
Wrap text at 80 columns where reasonable
Cuddle brace else

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/mac8390.c |  229 ++++++++++++++++++++++++++-----------------------
 1 files changed, 122 insertions(+), 107 deletions(-)

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 8bd09e2..8f16889 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -36,9 +36,9 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/bitops.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/hwtest.h>
 #include <asm/macints.h>
@@ -47,20 +47,25 @@ static char version[] =
 	"v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
 
 #define EI_SHIFT(x)	(ei_local->reg_offset[x])
-#define ei_inb(port)   in_8(port)
-#define ei_outb(val,port)  out_8(port,val)
-#define ei_inb_p(port)   in_8(port)
-#define ei_outb_p(val,port)  out_8(port,val)
+#define ei_inb(port)	in_8(port)
+#define ei_outb(val, port)	out_8(port, val)
+#define ei_inb_p(port)	in_8(port)
+#define ei_outb_p(val, port)	out_8(port, val)
 
 #include "lib8390.c"
 
 #define WD_START_PG			0x00	/* First page of TX buffer */
 #define CABLETRON_RX_START_PG		0x00    /* First page of RX buffer */
 #define CABLETRON_RX_STOP_PG		0x30    /* Last page +1 of RX ring */
-#define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG  /* First page of TX buffer */
+#define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG
+						/* First page of TX buffer */
 
-/* Unfortunately it seems we have to hardcode these for the moment */
-/* Shouldn't the card know about this? Does anyone know where to read it off the card? Do we trust the data provided by the card? */
+/*
+ * Unfortunately it seems we have to hardcode these for the moment
+ * Shouldn't the card know about this?
+ * Does anyone know where to read it off the card?
+ * Do we trust the data provided by the card?
+ */
 
 #define DAYNA_8390_BASE		0x80000
 #define DAYNA_8390_MEM		0x00000
@@ -82,7 +87,7 @@ enum mac8390_type {
 	MAC8390_KINETICS,
 };
 
-static const char * cardname[] = {
+static const char *cardname[] = {
 	"apple",
 	"asante",
 	"farallon",
@@ -92,7 +97,7 @@ static const char * cardname[] = {
 	"kinetics",
 };
 
-static int word16[] = {
+static const int word16[] = {
 	1, /* apple */
 	1, /* asante */
 	1, /* farallon */
@@ -103,7 +108,7 @@ static int word16[] = {
 };
 
 /* on which cards do we use NuBus resources? */
-static int useresources[] = {
+static const int useresources[] = {
 	1, /* apple */
 	1, /* asante */
 	1, /* farallon */
@@ -119,22 +124,22 @@ enum mac8390_access {
 	ACCESS_16,
 };
 
-extern int mac8390_memtest(struct net_device * dev);
-static int mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev,
+extern int mac8390_memtest(struct net_device *dev);
+static int mac8390_initdev(struct net_device *dev, struct nubus_dev *ndev,
 			   enum mac8390_type type);
 
-static int mac8390_open(struct net_device * dev);
-static int mac8390_close(struct net_device * dev);
+static int mac8390_open(struct net_device *dev);
+static int mac8390_close(struct net_device *dev);
 static void mac8390_no_reset(struct net_device *dev);
 static void interlan_reset(struct net_device *dev);
 
 /* Sane (32-bit chunk memory read/write) - Some Farallon and Apple do this*/
 static void sane_get_8390_hdr(struct net_device *dev,
 			      struct e8390_pkt_hdr *hdr, int ring_page);
-static void sane_block_input(struct net_device * dev, int count,
-			     struct sk_buff * skb, int ring_offset);
-static void sane_block_output(struct net_device * dev, int count,
-			      const unsigned char * buf, const int start_page);
+static void sane_block_input(struct net_device *dev, int count,
+			     struct sk_buff *skb, int ring_offset);
+static void sane_block_output(struct net_device *dev, int count,
+			      const unsigned char *buf, const int start_page);
 
 /* dayna_memcpy to and from card */
 static void dayna_memcpy_fromcard(struct net_device *dev, void *to,
@@ -150,8 +155,8 @@ static void dayna_block_input(struct net_device *dev, int count,
 static void dayna_block_output(struct net_device *dev, int count,
 			       const unsigned char *buf, int start_page);
 
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+#define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
 
 /* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */
 static void slow_sane_get_8390_hdr(struct net_device *dev,
@@ -222,10 +227,12 @@ static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev)
 		break;
 
 	case NUBUS_DRSW_DAYNA:
-		// These correspond to Dayna Sonic cards
-		// which use the macsonic driver
+		/*
+		 * These correspond to Dayna Sonic cards
+		 * which use the macsonic driver
+		 */
 		if (dev->dr_hw == NUBUS_DRHW_SMC9194 ||
-		    dev->dr_hw == NUBUS_DRHW_INTERLAN )
+		    dev->dr_hw == NUBUS_DRHW_INTERLAN)
 			return MAC8390_NONE;
 		else
 			return MAC8390_DAYNA;
@@ -260,7 +267,7 @@ static int __init mac8390_memsize(unsigned long membase)
 	local_irq_save(flags);
 	/* Check up to 32K in 4K increments */
 	for (i = 0; i < 8; i++) {
-		volatile unsigned short *m = (unsigned short *) (membase + (i * 0x1000));
+		volatile unsigned short *m = (unsigned short *)(membase + (i * 0x1000));
 
 		/* Unwriteable - we have a fully decoded card and the
 		   RAM end located */
@@ -275,22 +282,24 @@ static int __init mac8390_memsize(unsigned long membase)
 
 		/* check for partial decode and wrap */
 		for (j = 0; j < i; j++) {
-			volatile unsigned short *p = (unsigned short *) (membase + (j * 0x1000));
+			volatile unsigned short *p = (unsigned short *)(membase + (j * 0x1000));
 			if (*p != (0xA5A0 | j))
 				break;
- 		}
- 	}
+		}
+	}
 	local_irq_restore(flags);
-	/* in any case, we stopped once we tried one block too many,
-           or once we reached 32K */
- 	return i * 0x1000;
+	/*
+	 * in any case, we stopped once we tried one block too many,
+	 * or once we reached 32K
+	 */
+	return i * 0x1000;
 }
 
 struct net_device * __init mac8390_probe(int unit)
 {
 	struct net_device *dev;
 	volatile unsigned short *i;
-	struct nubus_dev * ndev = NULL;
+	struct nubus_dev *ndev = NULL;
 	int err = -ENODEV;
 
 	struct nubus_dir dir;
@@ -312,20 +321,23 @@ struct net_device * __init mac8390_probe(int unit)
 	if (unit >= 0)
 		sprintf(dev->name, "eth%d", unit);
 
-	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev))) {
+	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET,
+				       ndev))) {
 		/* Have we seen it already? */
 		if (slots & (1<<ndev->board->slot))
 			continue;
 		slots |= 1<<ndev->board->slot;
 
-		if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE)
+		cardtype = mac8390_ident(ndev);
+		if (cardtype == MAC8390_NONE)
 			continue;
 
 		printk_once(KERN_INFO pr_fmt(version));
 
 		dev->irq = SLOT2IRQ(ndev->board->slot);
 		/* This is getting to be a habit */
-		dev->base_addr = ndev->board->slot_addr | ((ndev->board->slot&0xf) << 20);
+		dev->base_addr = (ndev->board->slot_addr |
+				  ((ndev->board->slot & 0xf) << 20));
 
 		/* Get some Nubus info - we will trust the card's idea
 		   of where its memory and registers are. */
@@ -337,7 +349,7 @@ struct net_device * __init mac8390_probe(int unit)
 		}
 
 		/* Get the MAC address */
-		if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) {
+		if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) {
 			pr_info("%s: Couldn't get MAC address!\n", dev->name);
 			continue;
 		} else {
@@ -346,7 +358,8 @@ struct net_device * __init mac8390_probe(int unit)
 
 		if (useresources[cardtype] == 1) {
 			nubus_rewinddir(&dir);
-			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) {
+			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS,
+					    &ent) == -1) {
 				pr_err("%s: Memory offset resource for slot %X not found!\n",
 				       dev->name, ndev->board->slot);
 				continue;
@@ -356,7 +369,8 @@ struct net_device * __init mac8390_probe(int unit)
 			/* yes, this is how the Apple driver does it */
 			dev->base_addr = dev->mem_start + 0x10000;
 			nubus_rewinddir(&dir);
-			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) {
+			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH,
+					    &ent) == -1) {
 				pr_info("%s: Memory length resource for slot %X not found, probing\n",
 					dev->name, ndev->board->slot);
 				offset = mac8390_memsize(dev->mem_start);
@@ -485,22 +499,23 @@ static const struct net_device_ops mac8390_netdev_ops = {
 #endif
 };
 
-static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev,
-			    enum mac8390_type type)
+static int __init mac8390_initdev(struct net_device *dev,
+				  struct nubus_dev *ndev,
+				  enum mac8390_type type)
 {
-	static u32 fwrd4_offsets[16]={
+	static u32 fwrd4_offsets[16] = {
 		0,      4,      8,      12,
 		16,     20,     24,     28,
 		32,     36,     40,     44,
 		48,     52,     56,     60
 	};
-	static u32 back4_offsets[16]={
+	static u32 back4_offsets[16] = {
 		60,     56,     52,     48,
 		44,     40,     36,     32,
 		28,     24,     20,     16,
 		12,     8,      4,      0
 	};
-	static u32 fwrd2_offsets[16]={
+	static u32 fwrd2_offsets[16] = {
 		0,      2,      4,      6,
 		8,     10,     12,     14,
 		16,    18,     20,     22,
@@ -518,17 +533,17 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 
 	/* Cabletron's TX/RX buffers are backwards */
 	if (type == MAC8390_CABLETRON) {
-               ei_status.tx_start_page = CABLETRON_TX_START_PG;
-               ei_status.rx_start_page = CABLETRON_RX_START_PG;
-               ei_status.stop_page = CABLETRON_RX_STOP_PG;
-               ei_status.rmem_start = dev->mem_start;
-               ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256;
+		ei_status.tx_start_page = CABLETRON_TX_START_PG;
+		ei_status.rx_start_page = CABLETRON_RX_START_PG;
+		ei_status.stop_page = CABLETRON_RX_STOP_PG;
+		ei_status.rmem_start = dev->mem_start;
+		ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256;
 	} else {
-               ei_status.tx_start_page = WD_START_PG;
-               ei_status.rx_start_page = WD_START_PG + TX_PAGES;
-               ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
-               ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
-               ei_status.rmem_end = dev->mem_end;
+		ei_status.tx_start_page = WD_START_PG;
+		ei_status.rx_start_page = WD_START_PG + TX_PAGES;
+		ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
+		ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
+		ei_status.rmem_end = dev->mem_end;
 	}
 
 	/* Fill in model-specific information and functions */
@@ -600,8 +615,8 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 		ei_status.block_input = &slow_sane_block_input;
 		ei_status.block_output = &slow_sane_block_output;
 		ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
-	        ei_status.reg_offset = fwrd4_offsets;
-	        break;
+		ei_status.reg_offset = fwrd4_offsets;
+		break;
 
 	default:
 		pr_err("Card type %s is unsupported, sorry\n",
@@ -649,7 +664,7 @@ static void mac8390_no_reset(struct net_device *dev)
 
 static void interlan_reset(struct net_device *dev)
 {
-	unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq));
+	unsigned char *target = nubus_slot_addr(IRQ2SLOT(dev->irq));
 	if (ei_debug > 1)
 		pr_info("Need to reset the NS8390 t=%lu...", jiffies);
 	ei_status.txing = 0;
@@ -661,54 +676,53 @@ static void interlan_reset(struct net_device *dev)
 
 /* dayna_memcpy_fromio/dayna_memcpy_toio */
 /* directly from daynaport.c by Alan Cox */
-static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, int count)
+static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from,
+				  int count)
 {
 	volatile unsigned char *ptr;
-	unsigned char *target=to;
-	from<<=1;	/* word, skip overhead */
-	ptr=(unsigned char *)(dev->mem_start+from);
+	unsigned char *target = to;
+	from <<= 1;	/* word, skip overhead */
+	ptr = (unsigned char *)(dev->mem_start+from);
 	/* Leading byte? */
-	if (from&2) {
+	if (from & 2) {
 		*target++ = ptr[-1];
 		ptr += 2;
 		count--;
 	}
-	while(count>=2)
-	{
+	while (count >= 2) {
 		*(unsigned short *)target = *(unsigned short volatile *)ptr;
 		ptr += 4;			/* skip cruft */
 		target += 2;
-		count-=2;
+		count -= 2;
 	}
 	/* Trailing byte? */
-	if(count)
+	if (count)
 		*target = *ptr;
 }
 
-static void dayna_memcpy_tocard(struct net_device *dev, int to, const void *from, int count)
+static void dayna_memcpy_tocard(struct net_device *dev, int to,
+				const void *from, int count)
 {
 	volatile unsigned short *ptr;
-	const unsigned char *src=from;
-	to<<=1;	/* word, skip overhead */
-	ptr=(unsigned short *)(dev->mem_start+to);
+	const unsigned char *src = from;
+	to <<= 1;	/* word, skip overhead */
+	ptr = (unsigned short *)(dev->mem_start+to);
 	/* Leading byte? */
-	if (to&2) { /* avoid a byte write (stomps on other data) */
+	if (to & 2) {		/* avoid a byte write (stomps on other data) */
 		ptr[-1] = (ptr[-1]&0xFF00)|*src++;
 		ptr++;
 		count--;
 	}
-	while(count>=2)
-	{
-		*ptr++=*(unsigned short *)src;		/* Copy and */
+	while (count >= 2) {
+		*ptr++ = *(unsigned short *)src;	/* Copy and */
 		ptr++;			/* skip cruft */
 		src += 2;
-		count-=2;
+		count -= 2;
 	}
 	/* Trailing byte? */
-	if(count)
-	{
+	if (count) {
 		/* card doesn't like byte writes */
-		*ptr=(*ptr&0x00FF)|(*src << 8);
+		*ptr = (*ptr & 0x00FF) | (*src << 8);
 	}
 }
 
@@ -731,11 +745,14 @@ static void sane_block_input(struct net_device *dev, int count,
 	if (xfer_start + count > ei_status.rmem_end) {
 		/* We must wrap the input move. */
 		int semi_count = ei_status.rmem_end - xfer_start;
-		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, semi_count);
+		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base,
+			      semi_count);
 		count -= semi_count;
-		memcpy_toio(skb->data + semi_count, (char *)ei_status.rmem_start, count);
+		memcpy_toio(skb->data + semi_count,
+			    (char *)ei_status.rmem_start, count);
 	} else {
-		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, count);
+		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base,
+			      count);
 	}
 }
 
@@ -748,16 +765,18 @@ static void sane_block_output(struct net_device *dev, int count,
 }
 
 /* dayna block input/output */
-static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+static void dayna_get_8390_hdr(struct net_device *dev,
+			       struct e8390_pkt_hdr *hdr, int ring_page)
 {
 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
 
 	dayna_memcpy_fromcard(dev, hdr, hdr_start, 4);
 	/* Fix endianness */
-	hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8);
+	hdr->count = (hdr->count & 0xFF) << 8 | (hdr->count >> 8);
 }
 
-static void dayna_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+static void dayna_block_input(struct net_device *dev, int count,
+			      struct sk_buff *skb, int ring_offset)
 {
 	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
 	unsigned long xfer_start = xfer_base+dev->mem_start;
@@ -765,8 +784,7 @@ static void dayna_block_input(struct net_device *dev, int count, struct sk_buff
 	/* Note the offset math is done in card memory space which is word
 	   per long onto our space. */
 
-	if (xfer_start + count > ei_status.rmem_end)
-	{
+	if (xfer_start + count > ei_status.rmem_end) {
 		/* We must wrap the input move. */
 		int semi_count = ei_status.rmem_end - xfer_start;
 		dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count);
@@ -774,15 +792,14 @@ static void dayna_block_input(struct net_device *dev, int count, struct sk_buff
 		dayna_memcpy_fromcard(dev, skb->data + semi_count,
 				      ei_status.rmem_start - dev->mem_start,
 				      count);
-	}
-	else
-	{
+	} else {
 		dayna_memcpy_fromcard(dev, skb->data, xfer_base, count);
 	}
 }
 
-static void dayna_block_output(struct net_device *dev, int count, const unsigned char *buf,
-				int start_page)
+static void dayna_block_output(struct net_device *dev, int count,
+			       const unsigned char *buf,
+			       int start_page)
 {
 	long shmem = (start_page - WD_START_PG)<<8;
 
@@ -790,8 +807,9 @@ static void dayna_block_output(struct net_device *dev, int count, const unsigned
 }
 
 /* Cabletron block I/O */
-static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
-	int ring_page)
+static void slow_sane_get_8390_hdr(struct net_device *dev,
+				   struct e8390_pkt_hdr *hdr,
+				   int ring_page)
 {
 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
 	word_memcpy_fromcard(hdr, (char *)dev->mem_start + hdr_start, 4);
@@ -799,14 +817,13 @@ static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr
 	hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8);
 }
 
-static void slow_sane_block_input(struct net_device *dev, int count, struct sk_buff *skb,
-	int ring_offset)
+static void slow_sane_block_input(struct net_device *dev, int count,
+				  struct sk_buff *skb, int ring_offset)
 {
 	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
 	unsigned long xfer_start = xfer_base+dev->mem_start;
 
-	if (xfer_start + count > ei_status.rmem_end)
-	{
+	if (xfer_start + count > ei_status.rmem_end) {
 		/* We must wrap the input move. */
 		int semi_count = ei_status.rmem_end - xfer_start;
 		word_memcpy_fromcard(skb->data,
@@ -815,16 +832,14 @@ static void slow_sane_block_input(struct net_device *dev, int count, struct sk_b
 		count -= semi_count;
 		word_memcpy_fromcard(skb->data + semi_count,
 				     (char *)ei_status.rmem_start, count);
-	}
-	else
-	{
+	} else {
 		word_memcpy_fromcard(skb->data,
 				     (char *)dev->mem_start + xfer_base, count);
 	}
 }
 
-static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf,
-	int start_page)
+static void slow_sane_block_output(struct net_device *dev, int count,
+				   const unsigned char *buf, int start_page)
 {
 	long shmem = (start_page - WD_START_PG)<<8;
 
@@ -837,10 +852,10 @@ static void word_memcpy_tocard(void *tp, const void *fp, int count)
 	const unsigned short *from = fp;
 
 	count++;
-	count/=2;
+	count /= 2;
 
-	while(count--)
-		*to++=*from++;
+	while (count--)
+		*to++ = *from++;
 }
 
 static void word_memcpy_fromcard(void *tp, const void *fp, int count)
@@ -849,10 +864,10 @@ static void word_memcpy_fromcard(void *tp, const void *fp, int count)
 	const volatile unsigned short *from = fp;
 
 	count++;
-	count/=2;
+	count /= 2;
 
-	while(count--)
-		*to++=*from++;
+	while (count--)
+		*to++ = *from++;
 }
 
 
-- 
1.6.6.rc0.57.gad7a

[PATCH 5/5] drivers/net/mac8390.c: Add mac8390_init function

[Joe Perches]

Reduce indentation, make code a little neater.

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/mac8390.c |  207 +++++++++++++++++++++++++------------------------
 1 files changed, 105 insertions(+), 102 deletions(-)

diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 8f16889..c70bd68 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -295,16 +295,114 @@ static int __init mac8390_memsize(unsigned long membase)
 	return i * 0x1000;
 }
 
+static bool __init mac8390_init(struct net_device *dev, struct nubus_dev *ndev,
+				enum mac8390_type cardtype)
+{
+	struct nubus_dir dir;
+	struct nubus_dirent ent;
+	int offset;
+	volatile unsigned short *i;
+
+	printk_once(KERN_INFO pr_fmt(version));
+
+	dev->irq = SLOT2IRQ(ndev->board->slot);
+	/* This is getting to be a habit */
+	dev->base_addr = (ndev->board->slot_addr |
+			  ((ndev->board->slot & 0xf) << 20));
+
+	/*
+	 * Get some Nubus info - we will trust the card's idea
+	 * of where its memory and registers are.
+	 */
+
+	if (nubus_get_func_dir(ndev, &dir) == -1) {
+		pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
+		       dev->name, ndev->board->slot);
+		return false;
+	}
+
+	/* Get the MAC address */
+	if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) {
+		pr_info("%s: Couldn't get MAC address!\n", dev->name);
+		return false;
+	}
+
+	nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
+
+	if (useresources[cardtype] == 1) {
+		nubus_rewinddir(&dir);
+		if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS,
+				    &ent) == -1) {
+			pr_err("%s: Memory offset resource for slot %X not found!\n",
+			       dev->name, ndev->board->slot);
+			return false;
+		}
+		nubus_get_rsrc_mem(&offset, &ent, 4);
+		dev->mem_start = dev->base_addr + offset;
+		/* yes, this is how the Apple driver does it */
+		dev->base_addr = dev->mem_start + 0x10000;
+		nubus_rewinddir(&dir);
+		if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH,
+				    &ent) == -1) {
+			pr_info("%s: Memory length resource for slot %X not found, probing\n",
+				dev->name, ndev->board->slot);
+			offset = mac8390_memsize(dev->mem_start);
+		} else {
+			nubus_get_rsrc_mem(&offset, &ent, 4);
+		}
+		dev->mem_end = dev->mem_start + offset;
+	} else {
+		switch (cardtype) {
+		case MAC8390_KINETICS:
+		case MAC8390_DAYNA: /* it's the same */
+			dev->base_addr = (int)(ndev->board->slot_addr +
+					       DAYNA_8390_BASE);
+			dev->mem_start = (int)(ndev->board->slot_addr +
+					       DAYNA_8390_MEM);
+			dev->mem_end = dev->mem_start +
+				       mac8390_memsize(dev->mem_start);
+			break;
+		case MAC8390_INTERLAN:
+			dev->base_addr = (int)(ndev->board->slot_addr +
+					       INTERLAN_8390_BASE);
+			dev->mem_start = (int)(ndev->board->slot_addr +
+					       INTERLAN_8390_MEM);
+			dev->mem_end = dev->mem_start +
+				       mac8390_memsize(dev->mem_start);
+			break;
+		case MAC8390_CABLETRON:
+			dev->base_addr = (int)(ndev->board->slot_addr +
+					       CABLETRON_8390_BASE);
+			dev->mem_start = (int)(ndev->board->slot_addr +
+					       CABLETRON_8390_MEM);
+			/* The base address is unreadable if 0x00
+			 * has been written to the command register
+			 * Reset the chip by writing E8390_NODMA +
+			 *   E8390_PAGE0 + E8390_STOP just to be
+			 *   sure
+			 */
+			i = (void *)dev->base_addr;
+			*i = 0x21;
+			dev->mem_end = dev->mem_start +
+				       mac8390_memsize(dev->mem_start);
+			break;
+
+		default:
+			pr_err("Card type %s is unsupported, sorry\n",
+			       ndev->board->name);
+			return false;
+		}
+	}
+
+	return true;
+}
+
 struct net_device * __init mac8390_probe(int unit)
 {
 	struct net_device *dev;
-	volatile unsigned short *i;
 	struct nubus_dev *ndev = NULL;
 	int err = -ENODEV;
 
-	struct nubus_dir dir;
-	struct nubus_dirent ent;
-	int offset;
 	static unsigned int slots;
 
 	enum mac8390_type cardtype;
@@ -324,111 +422,16 @@ struct net_device * __init mac8390_probe(int unit)
 	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET,
 				       ndev))) {
 		/* Have we seen it already? */
-		if (slots & (1<<ndev->board->slot))
+		if (slots & (1 << ndev->board->slot))
 			continue;
-		slots |= 1<<ndev->board->slot;
+		slots |= 1 << ndev->board->slot;
 
 		cardtype = mac8390_ident(ndev);
 		if (cardtype == MAC8390_NONE)
 			continue;
 
-		printk_once(KERN_INFO pr_fmt(version));
-
-		dev->irq = SLOT2IRQ(ndev->board->slot);
-		/* This is getting to be a habit */
-		dev->base_addr = (ndev->board->slot_addr |
-				  ((ndev->board->slot & 0xf) << 20));
-
-		/* Get some Nubus info - we will trust the card's idea
-		   of where its memory and registers are. */
-
-		if (nubus_get_func_dir(ndev, &dir) == -1) {
-			pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
-			       dev->name, ndev->board->slot);
-			continue;
-		}
-
-		/* Get the MAC address */
-		if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) {
-			pr_info("%s: Couldn't get MAC address!\n", dev->name);
+		if (!mac8390_init(dev, ndev, cardtype))
 			continue;
-		} else {
-			nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
-		}
-
-		if (useresources[cardtype] == 1) {
-			nubus_rewinddir(&dir);
-			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS,
-					    &ent) == -1) {
-				pr_err("%s: Memory offset resource for slot %X not found!\n",
-				       dev->name, ndev->board->slot);
-				continue;
-			}
-			nubus_get_rsrc_mem(&offset, &ent, 4);
-			dev->mem_start = dev->base_addr + offset;
-			/* yes, this is how the Apple driver does it */
-			dev->base_addr = dev->mem_start + 0x10000;
-			nubus_rewinddir(&dir);
-			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH,
-					    &ent) == -1) {
-				pr_info("%s: Memory length resource for slot %X not found, probing\n",
-					dev->name, ndev->board->slot);
-				offset = mac8390_memsize(dev->mem_start);
-				} else {
-					nubus_get_rsrc_mem(&offset, &ent, 4);
-				}
-			dev->mem_end = dev->mem_start + offset;
-		} else {
-			switch (cardtype) {
-			case MAC8390_KINETICS:
-			case MAC8390_DAYNA: /* it's the same */
-				dev->base_addr =
-					(int)(ndev->board->slot_addr +
-					      DAYNA_8390_BASE);
-				dev->mem_start =
-					(int)(ndev->board->slot_addr +
-					      DAYNA_8390_MEM);
-				dev->mem_end =
-					dev->mem_start +
-					mac8390_memsize(dev->mem_start);
-				break;
-			case MAC8390_INTERLAN:
-				dev->base_addr =
-					(int)(ndev->board->slot_addr +
-					      INTERLAN_8390_BASE);
-				dev->mem_start =
-					(int)(ndev->board->slot_addr +
-					      INTERLAN_8390_MEM);
-				dev->mem_end =
-					dev->mem_start +
-					mac8390_memsize(dev->mem_start);
-				break;
-			case MAC8390_CABLETRON:
-				dev->base_addr =
-					(int)(ndev->board->slot_addr +
-					      CABLETRON_8390_BASE);
-				dev->mem_start =
-					(int)(ndev->board->slot_addr +
-					      CABLETRON_8390_MEM);
-				/* The base address is unreadable if 0x00
-				 * has been written to the command register
-				 * Reset the chip by writing E8390_NODMA +
-				 *   E8390_PAGE0 + E8390_STOP just to be
-				 *   sure
-				 */
-				i = (void *)dev->base_addr;
-				*i = 0x21;
-				dev->mem_end =
-					dev->mem_start +
-					mac8390_memsize(dev->mem_start);
-				break;
-
-			default:
-				pr_err("Card type %s is unsupported, sorry\n",
-				       ndev->board->name);
-				continue;
-			}
-		}
 
 		/* Do the nasty 8390 stuff */
 		if (!mac8390_initdev(dev, ndev, cardtype))
-- 
1.6.6.rc0.57.gad7a

Re: [PATCH 0/5] drivers/net/mac8390 cleanups

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon,  4 Jan 2010 13:52:58 -0800

> Collection of trivial cleanups to mac8390
> Uncompiled (no cross-compiler)
> No hardware to verify

All applied to net-next-2.6