From: viresh.kumar@st.com (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 00/63] Updating SPEAr Support
Date: Mon, 20 Dec 2010 13:55:21 +0530 [thread overview]
Message-ID: <cover.1292833228.git.viresh.kumar@st.com> (raw)
Following set of patches:
- updates SPEAr3xx, 6xx support
- Adds support for SPEAr13xx
- Removes Multiple defconfigs per machine family
Changes since V2:
- Following patches are removed from this patchset, as they are still under
review:
ST SPEAr: PCIE gadget suppport
ST SPEAr13xx: Adding machine support for pci gadget
ST SPEAr: Add smi driver for serial NOR flash
ST SPEAr: Adding support for serial nor flash in all spear platforms
- Following patches are already present in linus-next, so they are also removed
from this patchset:
mtd/fsmc.h: including linux/io.h for definition of readl
Keyboard: Adding support for spear-keyboard
USB host: Adding USB ehci & ohci support for spear platform
- spear-keyboard machine support is updated according to updations in driver
(driver is already in linus-next)
- rtc driver is updated and ioctl routine is removed.
Changes since V1:
- sev definitions moved to system.h and removed from spear and omap archs
- bug fix added in system controller file sp810.h
- Review Comments incorporated
- Driver and machine support are divided into separate patches
- Nand Driver is removed from patch list as it is already floated by Linus
Walleij.
- Few later patches of SPEAr13xx Patches are merged with initial patches of
SPEAr13xx
- Smaller Defconfigs are used instead of large.
- Clock renaming & minor corrections are moved to clock specific patches from
peripheral machine support patches.
- Removed Commented code related to SPI
- [PATCH] Incrementing the ecc_pos array to contain 128 char - is removed from
list
- Board specific code is moved to *evb.c files from machine files for EMI NOR
- replaced readl with __raw_readl in uncompress.h in plat-spear/include/plat/
Rebased on: v2.6.37-rc6
Bhupesh Sharma (1):
ST SPEAr 13xx : Adding support for SPEAr1310
Deepak Sikri (6):
ST SPEAr: Adding machine support for USB host
SPEAr Clock Framework: Adding support for PLL frequency change
SPEAr Power Management: Added the support for Standby mode.
GIC: Added dummy handlers for Power Management Suspend Resume
SPEAr CPU freq: Adding support for CPU Freq framework
ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms
Pratyush Anand (1):
ST SPEAr: Added PCIE host controller base driver support.
Rajeev Kumar (4):
rtc: Adding support for spear rtc
ST SPEAr: Adding machine support for rtc-spear
ST SPEAr: adding support for synopsis i2c designware
ST SPEAr: Adding machine support for keyboard
Ryan Mallon (5):
SPEAr3xx: Make local structures static
SPEAR3xx: Rename register/irq defines to remove naming conflicts
SPEAr3xx: Rework pmx_dev code to remove conflicts
SPEAr3xx: Rework KConfig to allow all boards to be compiled in
SPEAr3xx: Replace defconfigs with single unified defconfig
Shiraz Hashim (14):
ARM: move sev definition to common system.h include file
sp810 Fix: Switch to slow mode before sysctl_soft_reset
ST SPEAr: Formalized timer support
ST SPEAr13XX: Adding machine specific header files
ST SPEAr13XX: Adding machine specific src files
ST SPEAr: Adding support for SPEAr13xx SoC in spear generic plat/
ST SPEAr13XX: Added compilation support in arch/arm/
ST SPEAr1300: Adding default config file
ST SPEAr: Adding Debugfs support on clock framework
ST SPEAr: Replacing SIZE macro's with actual required size
SPEAr: defines base addresses as ulong.
ST SPEAr13xx: add L2 cache support
ST SPEAr13xx: Modified static mappings
ST SPEAr: Adding information in Documentation/ and MAINTAINERS
Vipin Kumar (7):
ST SPEAr: Adding machine support for nand
Newly erased page read workaround
ST SPEAr : EMI (Extrenal Memory Interface) controller driver
ST SPEAr : FSMC (Flexible Static Memory Controller) NOR interface
driver
SPEAr : Pad multiplexing handling modified
SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic
implementation
SPEAr : Updating pad multiplexing support
Vipul-kumar Samar (1):
ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx
Viresh Kumar (24):
ST SPEAr: Padmux code Updated
ST SPEAr: Making clock functions more generic
ST SPEAr: Updating Clock Support
ST SPEAr: Correcting SOC Config base address for spear320
ST SPEAr: Adding PLGPIO driver for spear platform
ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified
resource size
ST SPEAr: Adding support for ST's PWM IP
ST SPEAr: Adding Watchdog support
ST SPEAr: Adding support for SSP PL022
ST SPEAr: Adding support for SDHCI (SDIO)
ST SPEAr: Changing resource size of amba devices to SZ_4K
ST SPEAr: Adding miscellaneous devices
ST SPEAr: Adding support for DDR in clock framework
ST SPEAr: replace readl, writel with __raw_readl, __raw_writel in
uncompress.h
SPEAr: Adding and Updating Clock definitions
ST SPEAr3xx: Passing pmx devices address from machine *.c files
ST SPEAr Clock Framework: Updating for single image solution
ST SPEAr: Appending spear3** with global structures
ST SPEAr3xx: Updating plgpio and emi source to make it compliant with
single image strategy
SPEAr6xx: Rework Kconfig for single image solution
ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig
ST SPEAr13xx: Pass default padmux settings as parameter to
spear13**_init routine
ST SPEAr: Adding devices & clocks
ST SPEAr: Updating defconfigs
Documentation/arm/SPEAr/overview.txt | 34 +-
MAINTAINERS | 6 +
arch/arm/Kconfig | 9 +-
arch/arm/Makefile | 2 +
arch/arm/common/gic.c | 13 +
arch/arm/configs/spear13xx_defconfig | 127 ++
arch/arm/configs/spear300_defconfig | 51 -
arch/arm/configs/spear310_defconfig | 52 -
arch/arm/configs/spear320_defconfig | 52 -
arch/arm/configs/spear3xx_defconfig | 119 ++
arch/arm/configs/spear600_defconfig | 49 -
arch/arm/configs/spear6xx_defconfig | 109 ++
arch/arm/include/asm/hardware/sp810.h | 3 +
arch/arm/include/asm/system.h | 7 +
arch/arm/mach-spear13xx/Kconfig | 32 +
arch/arm/mach-spear13xx/Makefile | 23 +
arch/arm/mach-spear13xx/Makefile.boot | 3 +
arch/arm/mach-spear13xx/clock.c | 1204 ++++++++++++++++++++
arch/arm/mach-spear13xx/fsmc-nor.c | 85 ++
arch/arm/mach-spear13xx/headsmp.S | 95 ++
arch/arm/mach-spear13xx/hotplug.c | 135 +++
arch/arm/mach-spear13xx/include/mach/clkdev.h | 19 +
arch/arm/mach-spear13xx/include/mach/debug-macro.S | 14 +
arch/arm/mach-spear13xx/include/mach/entry-macro.S | 88 ++
arch/arm/mach-spear13xx/include/mach/generic.h | 276 +++++
arch/arm/mach-spear13xx/include/mach/gpio.h | 37 +
arch/arm/mach-spear13xx/include/mach/hardware.h | 37 +
arch/arm/mach-spear13xx/include/mach/io.h | 19 +
arch/arm/mach-spear13xx/include/mach/irqs.h | 153 +++
arch/arm/mach-spear13xx/include/mach/memory.h | 19 +
arch/arm/mach-spear13xx/include/mach/misc_regs.h | 386 +++++++
arch/arm/mach-spear13xx/include/mach/pcie.h | 170 +++
arch/arm/mach-spear13xx/include/mach/smp.h | 33 +
arch/arm/mach-spear13xx/include/mach/spear.h | 95 ++
arch/arm/mach-spear13xx/include/mach/spear1300.h | 21 +
arch/arm/mach-spear13xx/include/mach/spear1310.h | 65 ++
arch/arm/mach-spear13xx/include/mach/suspend.h | 47 +
arch/arm/mach-spear13xx/include/mach/system.h | 39 +
arch/arm/mach-spear13xx/include/mach/timex.h | 19 +
arch/arm/mach-spear13xx/include/mach/uncompress.h | 19 +
arch/arm/mach-spear13xx/include/mach/vmalloc.h | 18 +
arch/arm/mach-spear13xx/localtimer.c | 25 +
arch/arm/mach-spear13xx/pcie.c | 861 ++++++++++++++
arch/arm/mach-spear13xx/platsmp.c | 200 ++++
arch/arm/mach-spear13xx/pm.c | 107 ++
arch/arm/mach-spear13xx/sleep.S | 435 +++++++
arch/arm/mach-spear13xx/spear1300.c | 38 +
arch/arm/mach-spear13xx/spear1300_evb.c | 168 +++
arch/arm/mach-spear13xx/spear1310.c | 519 +++++++++
arch/arm/mach-spear13xx/spear1310_evb.c | 222 ++++
arch/arm/mach-spear13xx/spear13xx.c | 1085 ++++++++++++++++++
arch/arm/mach-spear3xx/Kconfig | 30 +-
arch/arm/mach-spear3xx/Kconfig300 | 17 -
arch/arm/mach-spear3xx/Kconfig310 | 17 -
arch/arm/mach-spear3xx/Kconfig320 | 17 -
arch/arm/mach-spear3xx/Makefile | 4 +
arch/arm/mach-spear3xx/clock.c | 576 ++++++++--
arch/arm/mach-spear3xx/emi.c | 117 ++
arch/arm/mach-spear3xx/include/mach/emi.h | 65 ++
arch/arm/mach-spear3xx/include/mach/generic.h | 280 +++--
arch/arm/mach-spear3xx/include/mach/gpio.h | 143 +++
arch/arm/mach-spear3xx/include/mach/irqs.h | 206 ++--
arch/arm/mach-spear3xx/include/mach/misc_regs.h | 12 +-
arch/arm/mach-spear3xx/include/mach/spear.h | 134 +--
arch/arm/mach-spear3xx/include/mach/spear300.h | 86 +-
arch/arm/mach-spear3xx/include/mach/spear310.h | 85 +-
arch/arm/mach-spear3xx/include/mach/spear320.h | 121 +--
arch/arm/mach-spear3xx/include/mach/suspend.h | 44 +
arch/arm/mach-spear3xx/spear300.c | 640 ++++++++---
arch/arm/mach-spear3xx/spear300_evb.c | 114 ++-
arch/arm/mach-spear3xx/spear310.c | 423 ++++++--
arch/arm/mach-spear3xx/spear310_evb.c | 140 ++-
arch/arm/mach-spear3xx/spear320.c | 844 +++++++++++----
arch/arm/mach-spear3xx/spear320_evb.c | 125 ++-
arch/arm/mach-spear3xx/spear3xx.c | 741 ++++++++++---
arch/arm/mach-spear6xx/Kconfig | 15 +-
arch/arm/mach-spear6xx/Kconfig600 | 17 -
arch/arm/mach-spear6xx/clock.c | 438 ++++++--
arch/arm/mach-spear6xx/include/mach/generic.h | 19 +-
arch/arm/mach-spear6xx/include/mach/gpio.h | 27 +
arch/arm/mach-spear6xx/include/mach/misc_regs.h | 12 +-
arch/arm/mach-spear6xx/include/mach/spear.h | 174 +---
arch/arm/mach-spear6xx/include/mach/suspend.h | 44 +
arch/arm/mach-spear6xx/spear600_evb.c | 40 +-
arch/arm/mach-spear6xx/spear6xx.c | 344 ++++++-
arch/arm/mm/Kconfig | 2 +-
arch/arm/plat-spear/Kconfig | 16 +
arch/arm/plat-spear/Makefile | 21 +-
arch/arm/plat-spear/clcd.c | 114 ++
arch/arm/plat-spear/clock.c | 905 +++++++++++++---
arch/arm/plat-spear/cpufreq.c | 159 +++
arch/arm/plat-spear/i2c_eval_board.c | 29 +
arch/arm/plat-spear/include/plat/clock.h | 189 +++-
arch/arm/plat-spear/include/plat/fsmc.h | 51 +
arch/arm/plat-spear/include/plat/gpio.h | 35 +
arch/arm/plat-spear/include/plat/keyboard.h | 143 +++
arch/arm/plat-spear/include/plat/padmux.h | 34 +-
arch/arm/plat-spear/include/plat/spi.h | 74 ++
arch/arm/plat-spear/include/plat/system.h | 2 +-
arch/arm/plat-spear/include/plat/uncompress.h | 4 +-
arch/arm/plat-spear/padmux.c | 54 +-
arch/arm/plat-spear/plgpio.c | 474 ++++++++
arch/arm/plat-spear/pll_clk.S | 187 +++
arch/arm/plat-spear/pm.c | 104 ++
arch/arm/plat-spear/pwm.c | 484 ++++++++
arch/arm/plat-spear/sleep.S | 288 +++++
arch/arm/plat-spear/time.c | 21 +-
drivers/mtd/nand/fsmc_nand.c | 28 +-
drivers/rtc/Kconfig | 8 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-spear.c | 534 +++++++++
drivers/video/Kconfig | 14 +-
include/linux/mtd/fsmc.h | 2 +
113 files changed, 15539 insertions(+), 1993 deletions(-)
create mode 100644 arch/arm/configs/spear13xx_defconfig
delete mode 100644 arch/arm/configs/spear300_defconfig
delete mode 100644 arch/arm/configs/spear310_defconfig
delete mode 100644 arch/arm/configs/spear320_defconfig
create mode 100644 arch/arm/configs/spear3xx_defconfig
delete mode 100644 arch/arm/configs/spear600_defconfig
create mode 100644 arch/arm/configs/spear6xx_defconfig
create mode 100644 arch/arm/mach-spear13xx/Kconfig
create mode 100644 arch/arm/mach-spear13xx/Makefile
create mode 100644 arch/arm/mach-spear13xx/Makefile.boot
create mode 100644 arch/arm/mach-spear13xx/clock.c
create mode 100644 arch/arm/mach-spear13xx/fsmc-nor.c
create mode 100644 arch/arm/mach-spear13xx/headsmp.S
create mode 100644 arch/arm/mach-spear13xx/hotplug.c
create mode 100644 arch/arm/mach-spear13xx/include/mach/clkdev.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-spear13xx/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-spear13xx/include/mach/generic.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/gpio.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/hardware.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/io.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/irqs.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/memory.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/misc_regs.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/pcie.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/smp.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/spear.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1300.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1310.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/suspend.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/system.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/timex.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/uncompress.h
create mode 100644 arch/arm/mach-spear13xx/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-spear13xx/localtimer.c
create mode 100644 arch/arm/mach-spear13xx/pcie.c
create mode 100644 arch/arm/mach-spear13xx/platsmp.c
create mode 100644 arch/arm/mach-spear13xx/pm.c
create mode 100644 arch/arm/mach-spear13xx/sleep.S
create mode 100644 arch/arm/mach-spear13xx/spear1300.c
create mode 100644 arch/arm/mach-spear13xx/spear1300_evb.c
create mode 100644 arch/arm/mach-spear13xx/spear1310.c
create mode 100644 arch/arm/mach-spear13xx/spear1310_evb.c
create mode 100644 arch/arm/mach-spear13xx/spear13xx.c
delete mode 100644 arch/arm/mach-spear3xx/Kconfig300
delete mode 100644 arch/arm/mach-spear3xx/Kconfig310
delete mode 100644 arch/arm/mach-spear3xx/Kconfig320
create mode 100644 arch/arm/mach-spear3xx/emi.c
create mode 100644 arch/arm/mach-spear3xx/include/mach/emi.h
create mode 100644 arch/arm/mach-spear3xx/include/mach/suspend.h
delete mode 100644 arch/arm/mach-spear6xx/Kconfig600
create mode 100644 arch/arm/mach-spear6xx/include/mach/suspend.h
create mode 100644 arch/arm/plat-spear/clcd.c
create mode 100644 arch/arm/plat-spear/cpufreq.c
create mode 100644 arch/arm/plat-spear/i2c_eval_board.c
create mode 100644 arch/arm/plat-spear/include/plat/fsmc.h
create mode 100644 arch/arm/plat-spear/include/plat/keyboard.h
create mode 100644 arch/arm/plat-spear/include/plat/spi.h
create mode 100644 arch/arm/plat-spear/plgpio.c
create mode 100644 arch/arm/plat-spear/pll_clk.S
create mode 100644 arch/arm/plat-spear/pm.c
create mode 100644 arch/arm/plat-spear/pwm.c
create mode 100644 arch/arm/plat-spear/sleep.S
create mode 100644 drivers/rtc/rtc-spear.c
--
1.7.2.2
next reply other threads:[~2010-12-20 8:25 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-20 8:25 Viresh Kumar [this message]
2010-12-20 8:25 ` [PATCH V3 01/63] ARM: move sev definition to common system.h include file Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 02/63] sp810 Fix: Switch to slow mode before sysctl_soft_reset Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 03/63] ST SPEAr: Padmux code Updated Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 04/63] ST SPEAr: Making clock functions more generic Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 05/63] ST SPEAr: Formalized timer support Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 06/63] ST SPEAr13XX: Adding machine specific header files Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 07/63] ST SPEAr13XX: Adding machine specific src files Viresh Kumar
2011-01-14 10:08 ` stanley.miao
2011-01-14 10:09 ` viresh kumar
2010-12-20 8:25 ` [PATCH V3 08/63] ST SPEAr: Adding support for SPEAr13xx SoC in spear generic plat/ Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 09/63] ST SPEAr13XX: Added compilation support in arch/arm/ Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 10/63] ST SPEAr1300: Adding default config file Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 11/63] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 12/63] ST SPEAr: Updating Clock Support Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 13/63] ST SPEAr: Adding Debugfs support on clock framework Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 14/63] ST SPEAr: Correcting SOC Config base address for spear320 Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 15/63] ST SPEAr: Adding PLGPIO driver for spear platform Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 17/63] ST SPEAr: Adding machine support for rtc-spear Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 18/63] ST SPEAr: adding support for synopsis i2c designware Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 19/63] ST SPEAr: Adding machine support for USB host Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 20/63] ST SPEAr: Adding machine support for keyboard Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 21/63] ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified resource size Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 22/63] ST SPEAr: Adding support for ST's PWM IP Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 23/63] ST SPEAr: Adding Watchdog support Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 24/63] ST SPEAr: Adding machine support for nand Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 25/63] Newly erased page read workaround Viresh Kumar
2010-12-20 9:19 ` [PATCH V3 25/63 resend] " Viresh Kumar
2011-01-14 5:21 ` viresh kumar
2011-01-14 5:21 ` viresh kumar
2011-01-14 12:36 ` [PATCH V3 25/63] " Linus Walleij
2010-12-20 8:25 ` [PATCH V3 26/63] ST SPEAr: Added PCIE host controller base driver support Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 27/63] ST SPEAr: Adding support for SSP PL022 Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 28/63] ST SPEAr: Adding support for SDHCI (SDIO) Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 29/63] ST SPEAr: Changing resource size of amba devices to SZ_4K Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 30/63] ST SPEAr: Replacing SIZE macro's with actual required size Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 31/63] SPEAr: defines base addresses as ulong Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 32/63] ST SPEAr: Adding miscellaneous devices Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 33/63] ST SPEAr 13xx : Adding support for SPEAr1310 Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 34/63] ST SPEAr: Adding support for DDR in clock framework Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 35/63] ST SPEAr : EMI (Extrenal Memory Interface) controller driver Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 36/63] ST SPEAr : FSMC (Flexible Static Memory Controller) NOR interface driver Viresh Kumar
2010-12-26 15:38 ` Linus Walleij
2010-12-26 15:38 ` Linus Walleij
2011-01-03 3:48 ` viresh kumar
2011-01-03 3:48 ` viresh kumar
2010-12-20 8:25 ` [PATCH V3 37/63] SPEAr Clock Framework: Adding support for PLL frequency change Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 38/63] SPEAr Power Management: Added the support for Standby mode Viresh Kumar
2010-12-20 8:25 ` [PATCH V3 39/63] GIC: Added dummy handlers for Power Management Suspend Resume Viresh Kumar
2010-12-20 11:10 ` Russell King - ARM Linux
2010-12-20 11:32 ` viresh kumar
2010-12-20 11:49 ` Russell King - ARM Linux
2010-12-20 12:20 ` [PATCH V3 39/63] GIC: Added dummy handlers for Power ManagementSuspend Resume Santosh Shilimkar
2010-12-20 12:28 ` Russell King - ARM Linux
2010-12-20 12:34 ` [PATCH V3 39/63] GIC: Added dummy handlers for PowerManagementSuspend Resume Santosh Shilimkar
2010-12-21 4:17 ` [PATCH V3 39/63] GIC: Added dummy handlers for Power Management Suspend Resume viresh kumar
2010-12-20 8:26 ` [PATCH V3 40/63] SPEAr CPU freq: Adding support for CPU Freq framework Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 41/63] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 42/63] ST SPEAr: replace readl, writel with __raw_readl, __raw_writel in uncompress.h Viresh Kumar
2011-01-07 2:26 ` stanley.miao
2011-01-07 9:17 ` Russell King - ARM Linux
2011-01-07 9:38 ` stanley.miao
2011-01-11 5:39 ` viresh kumar
2010-12-20 8:26 ` [PATCH V3 43/63] ST SPEAr13xx: add L2 cache support Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 44/63] ST SPEAr13xx: Modified static mappings Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 45/63] SPEAr: Adding and Updating Clock definitions Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 46/63] SPEAr : Pad multiplexing handling modified Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 47/63] SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic implementation Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 48/63] SPEAr : Updating pad multiplexing support Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 49/63] ST SPEAr3xx: Passing pmx devices address from machine *.c files Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 50/63] ST SPEAr Clock Framework: Updating for single image solution Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 51/63] SPEAr3xx: Make local structures static Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 52/63] SPEAR3xx: Rename register/irq defines to remove naming conflicts Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 53/63] SPEAr3xx: Rework pmx_dev code to remove conflicts Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 54/63] SPEAr3xx: Rework KConfig to allow all boards to be compiled in Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 55/63] SPEAr3xx: Replace defconfigs with single unified defconfig Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 56/63] ST SPEAr: Appending spear3** with global structures Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 57/63] ST SPEAr3xx: Updating plgpio and emi source to make it compliant with single image strategy Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 58/63] SPEAr6xx: Rework Kconfig for single image solution Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 59/63] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 60/63] ST SPEAr13xx: Pass default padmux settings as parameter to spear13**_init routine Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 61/63] ST SPEAr: Adding devices & clocks Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 62/63] ST SPEAr: Adding information in Documentation/ and MAINTAINERS Viresh Kumar
2010-12-20 8:26 ` [PATCH V3 63/63] ST SPEAr: Updating defconfigs Viresh Kumar
2010-12-20 8:28 ` [PATCH V3 16/63 resend] rtc: Adding support for spear rtc Viresh Kumar
2011-01-12 9:41 ` viresh kumar
2010-12-23 12:13 ` [PATCH V3 00/63] Updating SPEAr Support Russell King - ARM Linux
2010-12-24 4:01 ` viresh kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1292833228.git.viresh.kumar@st.com \
--to=viresh.kumar@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.