[Qemu-devel] [PULL] virtio-serial: fixes, enable ioeventfd

[Qemu-devel] [PULL] virtio-serial: fixes, enable ioeventfd

[Amit Shah]

The following changes since commit 57a8821bc6e4457230075a5c8da5f8a083889686:

  w32: Remove implementation of function ffs (2011-02-20 20:18:21 +0000)

are available in the git repository at:
  git://git.kernel.org/pub/scm/virt/qemu/amit/virtio-serial.git for-anthony

Amit Shah (3):
      virtio-serial: Use a struct to pass config information from proxy
      virtio-serial: Disallow generic ports at id 0
      virtio-serial: Enable ioeventfd

 hw/virtio-console.c    |    9 +++++++++
 hw/virtio-pci.c        |   15 +++++++++------
 hw/virtio-serial-bus.c |   16 ++++++++--------
 hw/virtio-serial.h     |    5 +++++
 hw/virtio.h            |    3 ++-
 5 files changed, 33 insertions(+), 15 deletions(-)

[Qemu-devel] [PATCH RESEND 1/3] virtio-serial: Use a struct to pass config information from proxy

[Amit Shah]

Instead of using a single variable to pass to the virtio_serial_init
function, use a struct so that expanding the number of variables to be
passed on later is easier.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
 hw/virtio-pci.c        |   12 ++++++------
 hw/virtio-serial-bus.c |   16 ++++++++--------
 hw/virtio-serial.h     |    5 +++++
 hw/virtio.h            |    3 ++-
 4 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index 3911b09..952b5d2 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -18,6 +18,7 @@
 #include "virtio.h"
 #include "virtio-blk.h"
 #include "virtio-net.h"
+#include "virtio-serial.h"
 #include "pci.h"
 #include "qemu-error.h"
 #include "msix.h"
@@ -109,8 +110,7 @@ typedef struct {
 #ifdef CONFIG_LINUX
     V9fsConf fsconf;
 #endif
-    /* Max. number of ports we can have for a the virtio-serial device */
-    uint32_t max_virtserial_ports;
+    virtio_serial_conf serial;
     virtio_net_conf net;
     bool ioeventfd_disabled;
     bool ioeventfd_started;
@@ -770,12 +770,12 @@ static int virtio_serial_init_pci(PCIDevice *pci_dev)
         proxy->class_code != PCI_CLASS_OTHERS)          /* qemu-kvm  */
         proxy->class_code = PCI_CLASS_COMMUNICATION_OTHER;
 
-    vdev = virtio_serial_init(&pci_dev->qdev, proxy->max_virtserial_ports);
+    vdev = virtio_serial_init(&pci_dev->qdev, &proxy->serial);
     if (!vdev) {
         return -1;
     }
     vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED
-                                        ? proxy->max_virtserial_ports + 1
+                                        ? proxy->serial.max_virtserial_ports + 1
                                         : proxy->nvectors;
     virtio_init_pci(proxy, vdev,
                     PCI_VENDOR_ID_REDHAT_QUMRANET,
@@ -902,8 +902,8 @@ static PCIDeviceInfo virtio_info[] = {
                                DEV_NVECTORS_UNSPECIFIED),
             DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
             DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
-            DEFINE_PROP_UINT32("max_ports", VirtIOPCIProxy, max_virtserial_ports,
-                               31),
+            DEFINE_PROP_UINT32("max_ports", VirtIOPCIProxy,
+                               serial.max_virtserial_ports, 31),
             DEFINE_PROP_END_OF_LIST(),
         },
         .qdev.reset = virtio_pci_reset,
diff --git a/hw/virtio-serial-bus.c b/hw/virtio-serial-bus.c
index e05ab5e..7bb37c0 100644
--- a/hw/virtio-serial-bus.c
+++ b/hw/virtio-serial-bus.c
@@ -814,19 +814,19 @@ void virtio_serial_port_qdev_register(VirtIOSerialPortInfo *info)
     qdev_register(&info->qdev);
 }
 
-VirtIODevice *virtio_serial_init(DeviceState *dev, uint32_t max_nr_ports)
+VirtIODevice *virtio_serial_init(DeviceState *dev, virtio_serial_conf *conf)
 {
     VirtIOSerial *vser;
     VirtIODevice *vdev;
     uint32_t i, max_supported_ports;
 
-    if (!max_nr_ports)
+    if (!conf->max_virtserial_ports)
         return NULL;
 
     /* Each port takes 2 queues, and one pair is for the control queue */
     max_supported_ports = VIRTIO_PCI_QUEUE_MAX / 2 - 1;
 
-    if (max_nr_ports > max_supported_ports) {
+    if (conf->max_virtserial_ports > max_supported_ports) {
         error_report("maximum ports supported: %u", max_supported_ports);
         return NULL;
     }
@@ -842,9 +842,9 @@ VirtIODevice *virtio_serial_init(DeviceState *dev, uint32_t max_nr_ports)
     vser->bus->vser = vser;
     QTAILQ_INIT(&vser->ports);
 
-    vser->bus->max_nr_ports = max_nr_ports;
-    vser->ivqs = qemu_malloc(max_nr_ports * sizeof(VirtQueue *));
-    vser->ovqs = qemu_malloc(max_nr_ports * sizeof(VirtQueue *));
+    vser->bus->max_nr_ports = conf->max_virtserial_ports;
+    vser->ivqs = qemu_malloc(conf->max_virtserial_ports * sizeof(VirtQueue *));
+    vser->ovqs = qemu_malloc(conf->max_virtserial_ports * sizeof(VirtQueue *));
 
     /* Add a queue for host to guest transfers for port 0 (backward compat) */
     vser->ivqs[0] = virtio_add_queue(vdev, 128, handle_input);
@@ -869,8 +869,8 @@ VirtIODevice *virtio_serial_init(DeviceState *dev, uint32_t max_nr_ports)
         vser->ovqs[i] = virtio_add_queue(vdev, 128, handle_output);
     }
 
-    vser->config.max_nr_ports = max_nr_ports;
-    vser->ports_map = qemu_mallocz(((max_nr_ports + 31) / 32)
+    vser->config.max_nr_ports = conf->max_virtserial_ports;
+    vser->ports_map = qemu_mallocz(((conf->max_virtserial_ports + 31) / 32)
         * sizeof(vser->ports_map[0]));
     /*
      * Reserve location 0 for a console port for backward compat
diff --git a/hw/virtio-serial.h b/hw/virtio-serial.h
index a308196..de624c3 100644
--- a/hw/virtio-serial.h
+++ b/hw/virtio-serial.h
@@ -45,6 +45,11 @@ struct virtio_console_control {
     uint16_t value;		/* Extra information for the key */
 };
 
+struct virtio_serial_conf {
+    /* Max. number of ports we can have for a the virtio-serial device */
+    uint32_t max_virtserial_ports;
+};
+
 /* Some events for the internal messages (control packets) */
 #define VIRTIO_CONSOLE_DEVICE_READY	0
 #define VIRTIO_CONSOLE_PORT_ADD		1
diff --git a/hw/virtio.h b/hw/virtio.h
index 31d16e1..d0920a8 100644
--- a/hw/virtio.h
+++ b/hw/virtio.h
@@ -195,7 +195,8 @@ VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf);
 struct virtio_net_conf;
 VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf,
                               struct virtio_net_conf *net);
-VirtIODevice *virtio_serial_init(DeviceState *dev, uint32_t max_nr_ports);
+typedef struct virtio_serial_conf virtio_serial_conf;
+VirtIODevice *virtio_serial_init(DeviceState *dev, virtio_serial_conf *serial);
 VirtIODevice *virtio_balloon_init(DeviceState *dev);
 #ifdef CONFIG_LINUX
 VirtIODevice *virtio_9p_init(DeviceState *dev, V9fsConf *conf);
-- 
1.7.4

[Qemu-devel] [PATCH RESEND 2/3] virtio-serial: Disallow generic ports at id 0

[Amit Shah]

It was found libvirt was using port 0 for generic ports.  It has been
fixed in libvirt commit 8e28c5d40200b4c5d483bd585d237b9d870372e5.

Port 0 is reserved for virtconsole devices for backward compatibility
with the old -virtioconsole (from qemu 0.12) device type.

Ensure we don't allow instantiating a port at id 0 as well.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
 hw/virtio-console.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/hw/virtio-console.c b/hw/virtio-console.c
index 62624ec..3560db3 100644
--- a/hw/virtio-console.c
+++ b/hw/virtio-console.c
@@ -11,6 +11,7 @@
  */
 
 #include "qemu-char.h"
+#include "qemu-error.h"
 #include "virtio-serial.h"
 
 typedef struct VirtConsole {
@@ -118,6 +119,14 @@ static int virtserialport_initfn(VirtIOSerialDevice *dev)
     VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev);
     VirtConsole *vcon = DO_UPCAST(VirtConsole, port, port);
 
+    if (port->id == 0) {
+        /*
+         * Disallow a generic port at id 0, that's reserved for
+         * console ports.
+         */
+        error_report("Port number 0 on virtio-serial devices reserved for virtconsole devices for backward compatibility.");
+        return -1;
+    }
     return generic_port_init(vcon, dev);
 }
 
-- 
1.7.4

[Qemu-devel] [PATCH RESEND 3/3] virtio-serial: Enable ioeventfd

[Amit Shah]

Enable ioeventfd for virtio-serial devices by default.  Commit
25db9ebe15125deb32958c6df74996f745edf1f9 lists the benefits of using
ioeventfd.

Copying a file from guest to host over a virtio-serial channel didn't
show much difference in time or io_exit rate.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
 hw/virtio-pci.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index 952b5d2..ef65590 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -789,6 +789,7 @@ static int virtio_serial_exit_pci(PCIDevice *pci_dev)
 {
     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 
+    virtio_pci_stop_ioeventfd(proxy);
     virtio_serial_exit(proxy->vdev);
     return virtio_exit_pci(pci_dev);
 }
@@ -898,6 +899,8 @@ static PCIDeviceInfo virtio_info[] = {
         .init      = virtio_serial_init_pci,
         .exit      = virtio_serial_exit_pci,
         .qdev.props = (Property[]) {
+            DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags,
+                            VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
             DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors,
                                DEV_NVECTORS_UNSPECIFIED),
             DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
-- 
1.7.4