From: viresh.kumar@st.com (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 0/7] SPEAr DT support updates
Date: Thu, 29 Mar 2012 16:10:58 +0530 [thread overview]
Message-ID: <cover.1333017183.git.viresh.kumar@st.com> (raw)
Hello,
This patchset updates DT support for SPEAr3xx and 6xx.
It has following changes:
- updates DT support Mainly for SPEAr3xx family
- updates dma support for SPEAr6xx
- updates defconfig
It has dependency on following patchsets:
- ehci & ohci: http://www.spinics.net/lists/linux-usb/msg60362.html
- rtc: http://lkml.org/lkml/2012/3/26/96
- keyboard: http://www.spinics.net/lists/linux-input/msg19904.html
V2->V3:
- Removed macro for adding entries in auxdata array for ssp and dma
- removed IO_ADDRESS() completely
- Create 16M static mappings instead of 4K mappings
- Don't return error from spear*dt_init() if board doesn't match for padmux
- Config symbols and #ifdef,#endif are not updated for DT
- interrupt-parenti=<&vic> moved to root node.
V1->V2:
- Separate DT_MACHINE_INIT macros are defined per SoC.
- PATCH 1/7 was sent earlier as individual patch, and is now included in this
patchset for completeness.
- clock support for ehci and ohci added
- plat data for UART PL011 removed as it is not required
- Minor issues fixed
Viresh Kumar (7):
SPEAr: Use CLKDEV_INIT for defining clk_lookups
SPEAr3xx: Add clock instance of usb hosts - ehci and ohci 0 and 1
SPEAr6xx: Add compilation support for dtbs using 'make dtbs'
SPEAr3xx: Replace printk() with pr_*()
ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture
SPEAr: Add PL080 DMA support for 3xx and 6xx
SPEAr: Update defconfigs
Documentation/arm/SPEAr/overview.txt | 13 +-
Documentation/devicetree/bindings/arm/spear.txt | 18 ++
arch/arm/boot/dts/spear300-evb.dts | 183 +++++++++++
arch/arm/boot/dts/spear300.dtsi | 72 +++++
arch/arm/boot/dts/spear310-evb.dts | 111 +++++++
arch/arm/boot/dts/spear310.dtsi | 75 +++++
arch/arm/boot/dts/spear320-evb.dts | 112 +++++++
arch/arm/boot/dts/spear320.dtsi | 90 ++++++
arch/arm/boot/dts/spear3xx.dtsi | 144 +++++++++
arch/arm/boot/dts/spear600-evb.dts | 4 +
arch/arm/boot/dts/spear600.dtsi | 8 +
arch/arm/configs/spear3xx_defconfig | 52 +++-
arch/arm/configs/spear6xx_defconfig | 41 ++-
arch/arm/mach-spear3xx/Kconfig | 34 +--
arch/arm/mach-spear3xx/Makefile | 13 +-
arch/arm/mach-spear3xx/Makefile.boot | 4 +
arch/arm/mach-spear3xx/clock.c | 182 +++++++-----
arch/arm/mach-spear3xx/include/mach/generic.h | 31 +--
arch/arm/mach-spear3xx/include/mach/hardware.h | 3 -
arch/arm/mach-spear3xx/include/mach/spear.h | 9 +-
arch/arm/mach-spear3xx/spear300.c | 294 ++++++++++++++++--
arch/arm/mach-spear3xx/spear300_evb.c | 75 -----
arch/arm/mach-spear3xx/spear310.c | 329 +++++++++++++++++++--
arch/arm/mach-spear3xx/spear310_evb.c | 81 -----
arch/arm/mach-spear3xx/spear320.c | 328 +++++++++++++++++++--
arch/arm/mach-spear3xx/spear320_evb.c | 79 -----
arch/arm/mach-spear3xx/spear3xx.c | 148 +++++----
arch/arm/mach-spear6xx/Makefile.boot | 2 +
arch/arm/mach-spear6xx/clock.c | 80 +++---
arch/arm/mach-spear6xx/spear6xx.c | 372 ++++++++++++++++++++++-
arch/arm/plat-spear/Kconfig | 3 +-
arch/arm/plat-spear/Makefile | 2 +-
arch/arm/plat-spear/include/plat/pl080.h | 21 ++
arch/arm/plat-spear/pl080.c | 79 +++++
34 files changed, 2505 insertions(+), 587 deletions(-)
create mode 100644 arch/arm/boot/dts/spear300-evb.dts
create mode 100644 arch/arm/boot/dts/spear300.dtsi
create mode 100644 arch/arm/boot/dts/spear310-evb.dts
create mode 100644 arch/arm/boot/dts/spear310.dtsi
create mode 100644 arch/arm/boot/dts/spear320-evb.dts
create mode 100644 arch/arm/boot/dts/spear320.dtsi
create mode 100644 arch/arm/boot/dts/spear3xx.dtsi
delete mode 100644 arch/arm/mach-spear3xx/spear300_evb.c
delete mode 100644 arch/arm/mach-spear3xx/spear310_evb.c
delete mode 100644 arch/arm/mach-spear3xx/spear320_evb.c
create mode 100644 arch/arm/plat-spear/include/plat/pl080.h
create mode 100644 arch/arm/plat-spear/pl080.c
--
1.7.9
WARNING: multiple messages have this Message-ID (diff)
From: Viresh Kumar <viresh.kumar-qxv4g6HH51o@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org
Cc: Viresh Kumar <viresh.kumar-qxv4g6HH51o@public.gmane.org>,
devicetree-discuss-mnsaURCQ41sdnm+yROfE0A@public.gmane.org,
spear-devel-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org,
viresh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
sr-ynQEQJNshbs@public.gmane.org
Subject: [PATCH V3 0/7] SPEAr DT support updates
Date: Thu, 29 Mar 2012 16:10:58 +0530 [thread overview]
Message-ID: <cover.1333017183.git.viresh.kumar@st.com> (raw)
Hello,
This patchset updates DT support for SPEAr3xx and 6xx.
It has following changes:
- updates DT support Mainly for SPEAr3xx family
- updates dma support for SPEAr6xx
- updates defconfig
It has dependency on following patchsets:
- ehci & ohci: http://www.spinics.net/lists/linux-usb/msg60362.html
- rtc: http://lkml.org/lkml/2012/3/26/96
- keyboard: http://www.spinics.net/lists/linux-input/msg19904.html
V2->V3:
- Removed macro for adding entries in auxdata array for ssp and dma
- removed IO_ADDRESS() completely
- Create 16M static mappings instead of 4K mappings
- Don't return error from spear*dt_init() if board doesn't match for padmux
- Config symbols and #ifdef,#endif are not updated for DT
- interrupt-parenti=<&vic> moved to root node.
V1->V2:
- Separate DT_MACHINE_INIT macros are defined per SoC.
- PATCH 1/7 was sent earlier as individual patch, and is now included in this
patchset for completeness.
- clock support for ehci and ohci added
- plat data for UART PL011 removed as it is not required
- Minor issues fixed
Viresh Kumar (7):
SPEAr: Use CLKDEV_INIT for defining clk_lookups
SPEAr3xx: Add clock instance of usb hosts - ehci and ohci 0 and 1
SPEAr6xx: Add compilation support for dtbs using 'make dtbs'
SPEAr3xx: Replace printk() with pr_*()
ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture
SPEAr: Add PL080 DMA support for 3xx and 6xx
SPEAr: Update defconfigs
Documentation/arm/SPEAr/overview.txt | 13 +-
Documentation/devicetree/bindings/arm/spear.txt | 18 ++
arch/arm/boot/dts/spear300-evb.dts | 183 +++++++++++
arch/arm/boot/dts/spear300.dtsi | 72 +++++
arch/arm/boot/dts/spear310-evb.dts | 111 +++++++
arch/arm/boot/dts/spear310.dtsi | 75 +++++
arch/arm/boot/dts/spear320-evb.dts | 112 +++++++
arch/arm/boot/dts/spear320.dtsi | 90 ++++++
arch/arm/boot/dts/spear3xx.dtsi | 144 +++++++++
arch/arm/boot/dts/spear600-evb.dts | 4 +
arch/arm/boot/dts/spear600.dtsi | 8 +
arch/arm/configs/spear3xx_defconfig | 52 +++-
arch/arm/configs/spear6xx_defconfig | 41 ++-
arch/arm/mach-spear3xx/Kconfig | 34 +--
arch/arm/mach-spear3xx/Makefile | 13 +-
arch/arm/mach-spear3xx/Makefile.boot | 4 +
arch/arm/mach-spear3xx/clock.c | 182 +++++++-----
arch/arm/mach-spear3xx/include/mach/generic.h | 31 +--
arch/arm/mach-spear3xx/include/mach/hardware.h | 3 -
arch/arm/mach-spear3xx/include/mach/spear.h | 9 +-
arch/arm/mach-spear3xx/spear300.c | 294 ++++++++++++++++--
arch/arm/mach-spear3xx/spear300_evb.c | 75 -----
arch/arm/mach-spear3xx/spear310.c | 329 +++++++++++++++++++--
arch/arm/mach-spear3xx/spear310_evb.c | 81 -----
arch/arm/mach-spear3xx/spear320.c | 328 +++++++++++++++++++--
arch/arm/mach-spear3xx/spear320_evb.c | 79 -----
arch/arm/mach-spear3xx/spear3xx.c | 148 +++++----
arch/arm/mach-spear6xx/Makefile.boot | 2 +
arch/arm/mach-spear6xx/clock.c | 80 +++---
arch/arm/mach-spear6xx/spear6xx.c | 372 ++++++++++++++++++++++-
arch/arm/plat-spear/Kconfig | 3 +-
arch/arm/plat-spear/Makefile | 2 +-
arch/arm/plat-spear/include/plat/pl080.h | 21 ++
arch/arm/plat-spear/pl080.c | 79 +++++
34 files changed, 2505 insertions(+), 587 deletions(-)
create mode 100644 arch/arm/boot/dts/spear300-evb.dts
create mode 100644 arch/arm/boot/dts/spear300.dtsi
create mode 100644 arch/arm/boot/dts/spear310-evb.dts
create mode 100644 arch/arm/boot/dts/spear310.dtsi
create mode 100644 arch/arm/boot/dts/spear320-evb.dts
create mode 100644 arch/arm/boot/dts/spear320.dtsi
create mode 100644 arch/arm/boot/dts/spear3xx.dtsi
delete mode 100644 arch/arm/mach-spear3xx/spear300_evb.c
delete mode 100644 arch/arm/mach-spear3xx/spear310_evb.c
delete mode 100644 arch/arm/mach-spear3xx/spear320_evb.c
create mode 100644 arch/arm/plat-spear/include/plat/pl080.h
create mode 100644 arch/arm/plat-spear/pl080.c
--
1.7.9
next reply other threads:[~2012-03-29 10:40 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-29 10:40 Viresh Kumar [this message]
2012-03-29 10:40 ` [PATCH V3 0/7] SPEAr DT support updates Viresh Kumar
2012-03-29 10:40 ` [PATCH V3 1/7] SPEAr: Use CLKDEV_INIT for defining clk_lookups Viresh Kumar
2012-03-29 10:40 ` Viresh Kumar
2012-03-29 10:41 ` [PATCH V3 2/7] SPEAr3xx: Add clock instance of usb hosts - ehci and ohci 0 and 1 Viresh Kumar
2012-03-29 10:41 ` Viresh Kumar
2012-03-29 10:41 ` [PATCH V3 3/7] SPEAr6xx: Add compilation support for dtbs using 'make dtbs' Viresh Kumar
2012-03-29 10:41 ` Viresh Kumar
2012-03-29 10:41 ` [PATCH V3 4/7] SPEAr3xx: Replace printk() with pr_*() Viresh Kumar
2012-03-29 10:41 ` Viresh Kumar
2012-03-29 10:41 ` [PATCH V3 5/7] ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture Viresh Kumar
2012-03-29 10:41 ` Viresh Kumar
2012-03-29 10:41 ` [PATCH V3 6/7] SPEAr: Add PL080 DMA support for 3xx and 6xx Viresh Kumar
2012-03-29 10:41 ` Viresh Kumar
2012-03-29 10:41 ` [PATCH V3 7/7] SPEAr: Update defconfigs Viresh Kumar
2012-03-29 10:41 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1333017183.git.viresh.kumar@st.com \
--to=viresh.kumar@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.