From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/8] at91: 3.7 fixes patch series
Date: Wed, 24 Oct 2012 17:33:49 +0200 [thread overview]
Message-ID: <cover.1351092432.git.nicolas.ferre@atmel.com> (raw)
Hi all,
I am posting this patch series just before sending a pull-request to Arnd and
Olof.
There are 2 new patches that I have just cooked today about external IRQ
handling: please review.
I would like you to double check that I have not made any mistake while
collecting the other patches...
Thanks, best regards,
Bo Shen (2):
ARM: at91/i2c: change id to let i2c-gpio work
ARM: at91/i2c: change id to let i2c-at91 work
Ivan Shugov (1):
ARM: at91: at91sam9g10: fix SOC type detection
Jean-Christophe PLAGNIOL-VILLARD (1):
ARM: at91: drop duplicated config SOC_AT91SAM9 entry
Josh Wu (1):
ARM: at91/tc: fix typo in the DT document
Marek Belisko (1):
ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.
Nicolas Ferre (2):
ARM: at91: fix external interrupts in non-DT case
ARM: at91: fix external interrupt specification in board code
Documentation/devicetree/bindings/arm/atmel-at91.txt | 2 +-
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 4 ++--
arch/arm/mach-at91/Kconfig | 10 ++--------
arch/arm/mach-at91/at91rm9200.c | 2 +-
arch/arm/mach-at91/at91rm9200_devices.c | 4 ++--
arch/arm/mach-at91/at91sam9260.c | 4 ++--
arch/arm/mach-at91/at91sam9260_devices.c | 4 ++--
arch/arm/mach-at91/at91sam9261.c | 4 ++--
arch/arm/mach-at91/at91sam9261_devices.c | 4 ++--
arch/arm/mach-at91/at91sam9263.c | 2 +-
arch/arm/mach-at91/at91sam9263_devices.c | 4 ++--
arch/arm/mach-at91/at91sam9rl_devices.c | 4 ++--
arch/arm/mach-at91/board-neocore926.c | 2 +-
arch/arm/mach-at91/board-sam9261ek.c | 2 +-
arch/arm/mach-at91/board-sam9263ek.c | 2 +-
arch/arm/mach-at91/generic.h | 3 ++-
arch/arm/mach-at91/irq.c | 9 +++++++--
arch/arm/mach-at91/setup.c | 4 ++--
18 files changed, 35 insertions(+), 35 deletions(-)
--
1.7.11.3
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: <plagnioj@jcrosoft.com>, <ludovic.desroches@atmel.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <nicolas.ferre@atmel.com>,
<voice.shen@atmel.com>, <marek.belisko@open-nandra.com>,
<ivan.shugov@gmail.com>, <josh.wu@atmel.com>
Subject: [PATCH 0/8] at91: 3.7 fixes patch series
Date: Wed, 24 Oct 2012 17:33:49 +0200 [thread overview]
Message-ID: <cover.1351092432.git.nicolas.ferre@atmel.com> (raw)
Hi all,
I am posting this patch series just before sending a pull-request to Arnd and
Olof.
There are 2 new patches that I have just cooked today about external IRQ
handling: please review.
I would like you to double check that I have not made any mistake while
collecting the other patches...
Thanks, best regards,
Bo Shen (2):
ARM: at91/i2c: change id to let i2c-gpio work
ARM: at91/i2c: change id to let i2c-at91 work
Ivan Shugov (1):
ARM: at91: at91sam9g10: fix SOC type detection
Jean-Christophe PLAGNIOL-VILLARD (1):
ARM: at91: drop duplicated config SOC_AT91SAM9 entry
Josh Wu (1):
ARM: at91/tc: fix typo in the DT document
Marek Belisko (1):
ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.
Nicolas Ferre (2):
ARM: at91: fix external interrupts in non-DT case
ARM: at91: fix external interrupt specification in board code
Documentation/devicetree/bindings/arm/atmel-at91.txt | 2 +-
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 4 ++--
arch/arm/mach-at91/Kconfig | 10 ++--------
arch/arm/mach-at91/at91rm9200.c | 2 +-
arch/arm/mach-at91/at91rm9200_devices.c | 4 ++--
arch/arm/mach-at91/at91sam9260.c | 4 ++--
arch/arm/mach-at91/at91sam9260_devices.c | 4 ++--
arch/arm/mach-at91/at91sam9261.c | 4 ++--
arch/arm/mach-at91/at91sam9261_devices.c | 4 ++--
arch/arm/mach-at91/at91sam9263.c | 2 +-
arch/arm/mach-at91/at91sam9263_devices.c | 4 ++--
arch/arm/mach-at91/at91sam9rl_devices.c | 4 ++--
arch/arm/mach-at91/board-neocore926.c | 2 +-
arch/arm/mach-at91/board-sam9261ek.c | 2 +-
arch/arm/mach-at91/board-sam9263ek.c | 2 +-
arch/arm/mach-at91/generic.h | 3 ++-
arch/arm/mach-at91/irq.c | 9 +++++++--
arch/arm/mach-at91/setup.c | 4 ++--
18 files changed, 35 insertions(+), 35 deletions(-)
--
1.7.11.3
next reply other threads:[~2012-10-24 15:33 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-24 15:33 Nicolas Ferre [this message]
2012-10-24 15:33 ` [PATCH 0/8] at91: 3.7 fixes patch series Nicolas Ferre
2012-10-24 15:33 ` [PATCH 1/8] ARM: at91/tc: fix typo in the DT document Nicolas Ferre
2012-10-24 15:33 ` Nicolas Ferre
2012-10-24 15:33 ` [PATCH 2/8] ARM: at91: at91sam9g10: fix SOC type detection Nicolas Ferre
2012-10-24 15:33 ` Nicolas Ferre
2012-10-24 15:33 ` [PATCH 3/8] ARM: at91: fix external interrupts in non-DT case Nicolas Ferre
2012-10-24 15:33 ` Nicolas Ferre
2012-10-24 15:58 ` ludovic.desroches
2012-10-24 15:33 ` [PATCH 4/8] ARM: at91: fix external interrupt specification in board code Nicolas Ferre
2012-10-24 15:33 ` Nicolas Ferre
2012-10-24 15:58 ` ludovic.desroches
2012-10-24 15:33 ` [PATCH 5/8] ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels Nicolas Ferre
2012-10-24 15:33 ` Nicolas Ferre
2012-10-24 15:33 ` [PATCH 6/8] ARM: at91/i2c: change id to let i2c-gpio work Nicolas Ferre
2012-10-24 15:33 ` Nicolas Ferre
2012-10-24 15:59 ` ludovic.desroches
2012-10-24 15:33 ` [PATCH 7/8] ARM: at91/i2c: change id to let i2c-at91 work Nicolas Ferre
2012-10-24 15:33 ` Nicolas Ferre
2012-10-24 15:59 ` ludovic.desroches
2012-10-24 15:33 ` [PATCH 8/8] ARM: at91: drop duplicated config SOC_AT91SAM9 entry Nicolas Ferre
2012-10-24 15:33 ` Nicolas Ferre
2012-10-24 15:44 ` [PATCH 0/8] at91: 3.7 fixes patch series Jean-Christophe PLAGNIOL-VILLARD
2012-10-24 15:44 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1351092432.git.nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.