* [PATCH 1/4] ARM: kirkwood: sort dt nodes by address
2013-12-12 15:25 ` [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address Jason Cooper
@ 2013-12-12 15:25 ` Jason Cooper
2013-12-12 15:25 ` [PATCH 2/4] ARM: dove: sort DT " Jason Cooper
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Jason Cooper @ 2013-12-12 15:25 UTC (permalink / raw)
To: linux-arm-kernel
This has caused merge conflicts in the past.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/kirkwood.dtsi | 140 ++++++++++++++++++++--------------------
1 file changed, 70 insertions(+), 70 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index dd58a25a4166..1da94c187085 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -70,39 +70,21 @@
#address-cells = <1>;
#size-cells = <1>;
- mbusc: mbus-controller at 20000 {
- compatible = "marvell,mbus-controller";
- reg = <0x20000 0x80>, <0x1500 0x20>;
- };
-
- timer: timer at 20300 {
- compatible = "marvell,orion-timer";
- reg = <0x20300 0x20>;
- interrupt-parent = <&bridge_intc>;
- interrupts = <1>, <2>;
- clocks = <&core_clk 0>;
- };
-
- intc: main-interrupt-ctrl at 20200 {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20200 0x10>, <0x20210 0x10>;
- };
-
- bridge_intc: bridge-interrupt-ctrl at 20110 {
- compatible = "marvell,orion-bridge-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20110 0x8>;
- interrupts = <1>;
- marvell,#interrupts = <6>;
- };
-
core_clk: core-clocks at 10030 {
compatible = "marvell,kirkwood-core-clock";
reg = <0x10030 0x4>;
- #clock-cells = <1>;
+ #clock-cells = <1>;
+ };
+
+ spi at 10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <23>;
+ reg = <0x10600 0x28>;
+ clocks = <&gate_clk 7>;
+ status = "disabled";
};
gpio0: gpio at 10100 {
@@ -129,6 +111,17 @@
clocks = <&gate_clk 7>;
};
+ i2c at 11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <29>;
+ clock-frequency = <100000>;
+ clocks = <&gate_clk 7>;
+ status = "disabled";
+ };
+
serial at 12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
@@ -147,15 +140,18 @@
status = "disabled";
};
- spi at 10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <23>;
- reg = <0x10600 0x28>;
- clocks = <&gate_clk 7>;
- status = "disabled";
+ mbusc: mbus-controller at 20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x80>, <0x1500 0x20>;
+ };
+
+ bridge_intc: bridge-interrupt-ctrl at 20110 {
+ compatible = "marvell,orion-bridge-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20110 0x8>;
+ interrupts = <1>;
+ marvell,#interrupts = <6>;
};
gate_clk: clock-gating-control at 2011c {
@@ -165,6 +161,21 @@
#clock-cells = <1>;
};
+ intc: main-interrupt-ctrl at 20200 {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x10>, <0x20210 0x10>;
+ };
+
+ timer: timer at 20300 {
+ compatible = "marvell,orion-timer";
+ reg = <0x20300 0x20>;
+ interrupt-parent = <&bridge_intc>;
+ interrupts = <1>, <2>;
+ clocks = <&core_clk 0>;
+ };
+
wdt: watchdog-timer at 20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
@@ -174,6 +185,14 @@
status = "okay";
};
+ ehci at 50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <19>;
+ clocks = <&gate_clk 3>;
+ status = "okay";
+ };
+
xor at 60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
@@ -214,37 +233,6 @@
};
};
- ehci@50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <19>;
- clocks = <&gate_clk 3>;
- status = "okay";
- };
-
- i2c at 11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <29>;
- clock-frequency = <100000>;
- clocks = <&gate_clk 7>;
- status = "disabled";
- };
-
- mdio: mdio-bus at 72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <46>;
- clocks = <&gate_clk 0>;
- status = "disabled";
-
- /* add phy nodes in board file */
- };
-
eth0: ethernet-controller at 72000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
@@ -265,6 +253,18 @@
};
};
+ mdio: mdio-bus at 72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <46>;
+ clocks = <&gate_clk 0>;
+ status = "disabled";
+
+ /* add phy nodes in board file */
+ };
+
eth1: ethernet-controller at 76000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
--
1.8.5.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/4] ARM: dove: sort DT nodes by address
2013-12-12 15:25 ` [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address Jason Cooper
2013-12-12 15:25 ` [PATCH 1/4] ARM: kirkwood: sort dt nodes by address Jason Cooper
@ 2013-12-12 15:25 ` Jason Cooper
2013-12-12 15:25 ` [PATCH 3/4] ARM: orion5x: " Jason Cooper
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Jason Cooper @ 2013-12-12 15:25 UTC (permalink / raw)
To: linux-arm-kernel
Prevent future (unnecessary) merge conflicts
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/dove.dtsi | 496 ++++++++++++++++++++++----------------------
1 file changed, 248 insertions(+), 248 deletions(-)
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index db24b41a5264..852db2860015 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -107,60 +107,29 @@
0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
- mbusc: mbus-ctrl at 20000 {
- compatible = "marvell,mbus-controller";
- reg = <0x20000 0x80>, <0x800100 0x8>;
- };
-
- timer: timer at 20300 {
- compatible = "marvell,orion-timer";
- reg = <0x20300 0x20>;
- interrupt-parent = <&bridge_intc>;
- interrupts = <1>, <2>;
+ spi0: spi-ctrl at 10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <6>;
+ reg = <0x10600 0x28>;
clocks = <&core_clk 0>;
+ pinctrl-0 = <&pmx_spi0>;
+ pinctrl-names = "default";
+ status = "disabled";
};
- intc: main-interrupt-ctrl at 20200 {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20200 0x10>, <0x20210 0x10>;
- };
-
- bridge_intc: bridge-interrupt-ctrl at 20110 {
- compatible = "marvell,orion-bridge-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20110 0x8>;
- interrupts = <0>;
- marvell,#interrupts = <5>;
- };
-
- pmu_intc: pmu-interrupt-ctrl at d0050 {
- compatible = "marvell,dove-pmu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xd0050 0x8>;
- interrupts = <33>;
- marvell,#interrupts = <7>;
- };
-
- core_clk: core-clocks at d0214 {
- compatible = "marvell,dove-core-clock";
- reg = <0xd0214 0x4>;
- #clock-cells = <1>;
- };
-
- gate_clk: clock-gating-ctrl at d0038 {
- compatible = "marvell,dove-gating-clock";
- reg = <0xd0038 0x4>;
+ i2c0: i2c-ctrl at 11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <11>;
+ clock-frequency = <400000>;
+ timeout-ms = <1000>;
clocks = <&core_clk 0>;
- #clock-cells = <1>;
- };
-
- thermal: thermal-diode at d001c {
- compatible = "marvell,dove-thermal";
- reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+ status = "disabled";
};
uart0: serial at 12000 {
@@ -201,34 +170,213 @@
status = "disabled";
};
- gpio0: gpio-ctrl at d0400 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xd0400 0x20>;
- ngpios = <32>;
+ spi1: spi-ctrl at 14600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <5>;
+ reg = <0x14600 0x28>;
+ clocks = <&core_clk 0>;
+ status = "disabled";
+ };
+
+ mbusc: mbus-ctrl at 20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x80>, <0x800100 0x8>;
+ };
+
+ bridge_intc: bridge-interrupt-ctrl at 20110 {
+ compatible = "marvell,orion-bridge-intc";
interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <12>, <13>, <14>, <60>;
+ #interrupt-cells = <1>;
+ reg = <0x20110 0x8>;
+ interrupts = <0>;
+ marvell,#interrupts = <5>;
};
- gpio1: gpio-ctrl at d0420 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xd0420 0x20>;
- ngpios = <32>;
+ intc: main-interrupt-ctrl at 20200 {
+ compatible = "marvell,orion-intc";
interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <61>;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x10>, <0x20210 0x10>;
};
- gpio2: gpio-ctrl at e8400 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xe8400 0x0c>;
- ngpios = <8>;
+ timer: timer at 20300 {
+ compatible = "marvell,orion-timer";
+ reg = <0x20300 0x20>;
+ interrupt-parent = <&bridge_intc>;
+ interrupts = <1>, <2>;
+ clocks = <&core_clk 0>;
+ };
+
+ crypto: crypto-engine at 30000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x30000 0x10000>,
+ <0xffffe000 0x800>;
+ reg-names = "regs", "sram";
+ interrupts = <31>;
+ clocks = <&gate_clk 15>;
+ status = "okay";
+ };
+
+ ehci0: usb-host at 50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <24>;
+ clocks = <&gate_clk 0>;
+ status = "okay";
+ };
+
+ ehci1: usb-host at 51000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x51000 0x1000>;
+ interrupts = <25>;
+ clocks = <&gate_clk 1>;
+ status = "okay";
+ };
+
+ xor0: dma-engine at 60800 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60800 0x100
+ 0x60a00 0x100>;
+ clocks = <&gate_clk 23>;
+ status = "okay";
+
+ channel0 {
+ interrupts = <39>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+
+ channel1 {
+ interrupts = <40>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ };
+
+ xor1: dma-engine at 60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ clocks = <&gate_clk 24>;
+ status = "okay";
+
+ channel0 {
+ interrupts = <42>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+
+ channel1 {
+ interrupts = <43>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ };
+
+ sdio1: sdio-host at 90000 {
+ compatible = "marvell,dove-sdhci";
+ reg = <0x90000 0x100>;
+ interrupts = <36>, <38>;
+ clocks = <&gate_clk 9>;
+ pinctrl-0 = <&pmx_sdio1>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ eth: ethernet-ctrl at 72000 {
+ compatible = "marvell,orion-eth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72000 0x4000>;
+ clocks = <&gate_clk 2>;
+ marvell,tx-checksum-limit = <1600>;
+ status = "disabled";
+
+ ethernet-port at 0 {
+ device_type = "network";
+ compatible = "marvell,orion-eth-port";
+ reg = <0>;
+ interrupts = <29>;
+ /* overwrite MAC address in bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <ðphy>;
+ };
+ };
+
+ mdio: mdio-bus at 72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <30>;
+ clocks = <&gate_clk 2>;
+ status = "disabled";
+
+ ethphy: ethernet-phy {
+ device_type = "ethernet-phy";
+ /* set phy address in board file */
+ };
+ };
+
+ sdio0: sdio-host at 92000 {
+ compatible = "marvell,dove-sdhci";
+ reg = <0x92000 0x100>;
+ interrupts = <35>, <37>;
+ clocks = <&gate_clk 8>;
+ pinctrl-0 = <&pmx_sdio0>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ sata0: sata-host at a0000 {
+ compatible = "marvell,orion-sata";
+ reg = <0xa0000 0x2400>;
+ interrupts = <62>;
+ clocks = <&gate_clk 3>;
+ nr-ports = <1>;
+ status = "disabled";
+ };
+
+ audio0: audio-controller at b0000 {
+ compatible = "marvell,dove-audio";
+ reg = <0xb0000 0x2210>;
+ interrupts = <19>, <20>;
+ clocks = <&gate_clk 12>;
+ clock-names = "internal";
+ status = "disabled";
+ };
+
+ audio1: audio-controller at b4000 {
+ compatible = "marvell,dove-audio";
+ reg = <0xb4000 0x2210>;
+ interrupts = <21>, <22>;
+ clocks = <&gate_clk 13>;
+ clock-names = "internal";
+ status = "disabled";
+ };
+
+ thermal: thermal-diode at d001c {
+ compatible = "marvell,dove-thermal";
+ reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+ };
+
+ gate_clk: clock-gating-ctrl at d0038 {
+ compatible = "marvell,dove-gating-clock";
+ reg = <0xd0038 0x4>;
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ pmu_intc: pmu-interrupt-ctrl at d0050 {
+ compatible = "marvell,dove-pmu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd0050 0x8>;
+ interrupts = <33>;
+ marvell,#interrupts = <7>;
};
pinctrl: pin-ctrl at d0200 {
@@ -422,85 +570,32 @@
};
};
- spi0: spi-ctrl at 10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <6>;
- reg = <0x10600 0x28>;
- clocks = <&core_clk 0>;
- pinctrl-0 = <&pmx_spi0>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- spi1: spi-ctrl at 14600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- interrupts = <5>;
- reg = <0x14600 0x28>;
- clocks = <&core_clk 0>;
- status = "disabled";
- };
-
- i2c0: i2c-ctrl at 11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <11>;
- clock-frequency = <400000>;
- timeout-ms = <1000>;
- clocks = <&core_clk 0>;
- status = "disabled";
- };
-
- ehci0: usb-host at 50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <24>;
- clocks = <&gate_clk 0>;
- status = "okay";
- };
-
- ehci1: usb-host at 51000 {
- compatible = "marvell,orion-ehci";
- reg = <0x51000 0x1000>;
- interrupts = <25>;
- clocks = <&gate_clk 1>;
- status = "okay";
- };
-
- sdio0: sdio-host at 92000 {
- compatible = "marvell,dove-sdhci";
- reg = <0x92000 0x100>;
- interrupts = <35>, <37>;
- clocks = <&gate_clk 8>;
- pinctrl-0 = <&pmx_sdio0>;
- pinctrl-names = "default";
- status = "disabled";
+ core_clk: core-clocks at d0214 {
+ compatible = "marvell,dove-core-clock";
+ reg = <0xd0214 0x4>;
+ #clock-cells = <1>;
};
- sdio1: sdio-host at 90000 {
- compatible = "marvell,dove-sdhci";
- reg = <0x90000 0x100>;
- interrupts = <36>, <38>;
- clocks = <&gate_clk 9>;
- pinctrl-0 = <&pmx_sdio1>;
- pinctrl-names = "default";
- status = "disabled";
+ gpio0: gpio-ctrl at d0400 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xd0400 0x20>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <12>, <13>, <14>, <60>;
};
- sata0: sata-host at a0000 {
- compatible = "marvell,orion-sata";
- reg = <0xa0000 0x2400>;
- interrupts = <62>;
- clocks = <&gate_clk 3>;
- nr-ports = <1>;
- status = "disabled";
+ gpio1: gpio-ctrl at d0420 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xd0420 0x20>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <61>;
};
rtc: real-time-clock at d8500 {
@@ -510,107 +605,12 @@
interrupts = <5>;
};
- crypto: crypto-engine at 30000 {
- compatible = "marvell,orion-crypto";
- reg = <0x30000 0x10000>,
- <0xffffe000 0x800>;
- reg-names = "regs", "sram";
- interrupts = <31>;
- clocks = <&gate_clk 15>;
- status = "okay";
- };
-
- xor0: dma-engine at 60800 {
- compatible = "marvell,orion-xor";
- reg = <0x60800 0x100
- 0x60a00 0x100>;
- clocks = <&gate_clk 23>;
- status = "okay";
-
- channel0 {
- interrupts = <39>;
- dmacap,memcpy;
- dmacap,xor;
- };
-
- channel1 {
- interrupts = <40>;
- dmacap,memcpy;
- dmacap,xor;
- };
- };
-
- xor1: dma-engine at 60900 {
- compatible = "marvell,orion-xor";
- reg = <0x60900 0x100
- 0x60b00 0x100>;
- clocks = <&gate_clk 24>;
- status = "okay";
-
- channel0 {
- interrupts = <42>;
- dmacap,memcpy;
- dmacap,xor;
- };
-
- channel1 {
- interrupts = <43>;
- dmacap,memcpy;
- dmacap,xor;
- };
- };
-
- mdio: mdio-bus at 72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <30>;
- clocks = <&gate_clk 2>;
- status = "disabled";
-
- ethphy: ethernet-phy {
- device_type = "ethernet-phy";
- /* set phy address in board file */
- };
- };
-
- eth: ethernet-ctrl at 72000 {
- compatible = "marvell,orion-eth";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72000 0x4000>;
- clocks = <&gate_clk 2>;
- marvell,tx-checksum-limit = <1600>;
- status = "disabled";
-
- ethernet-port at 0 {
- device_type = "network";
- compatible = "marvell,orion-eth-port";
- reg = <0>;
- interrupts = <29>;
- /* overwrite MAC address in bootloader */
- local-mac-address = [00 00 00 00 00 00];
- phy-handle = <ðphy>;
- };
- };
-
- audio0: audio-controller at b0000 {
- compatible = "marvell,dove-audio";
- reg = <0xb0000 0x2210>;
- interrupts = <19>, <20>;
- clocks = <&gate_clk 12>;
- clock-names = "internal";
- status = "disabled";
- };
-
- audio1: audio-controller at b4000 {
- compatible = "marvell,dove-audio";
- reg = <0xb4000 0x2210>;
- interrupts = <21>, <22>;
- clocks = <&gate_clk 13>;
- clock-names = "internal";
- status = "disabled";
+ gpio2: gpio-ctrl at e8400 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xe8400 0x0c>;
+ ngpios = <8>;
};
};
};
--
1.8.5.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/4] ARM: orion5x: sort DT nodes by address
2013-12-12 15:25 ` [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address Jason Cooper
2013-12-12 15:25 ` [PATCH 1/4] ARM: kirkwood: sort dt nodes by address Jason Cooper
2013-12-12 15:25 ` [PATCH 2/4] ARM: dove: sort DT " Jason Cooper
@ 2013-12-12 15:25 ` Jason Cooper
2013-12-12 15:25 ` [PATCH 4/4] ARM: mvebu: " Jason Cooper
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Jason Cooper @ 2013-12-12 15:25 UTC (permalink / raw)
To: linux-arm-kernel
Prevent future unnecessary merge conflicts
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/orion5x.dtsi | 106 ++++++++++++++++++++---------------------
1 file changed, 53 insertions(+), 53 deletions(-)
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index e06c37e91ac6..9f51538cd9ef 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -42,6 +42,25 @@
interrupts = <6>, <7>, <8>, <9>;
};
+ spi at 10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ reg = <0x10600 0x28>;
+ status = "disabled";
+ };
+
+ i2c at 11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <5>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
serial at 12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
@@ -60,15 +79,6 @@
status = "disabled";
};
- spi at 10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- reg = <0x10600 0x28>;
- status = "disabled";
- };
-
wdt at 20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
@@ -82,30 +92,6 @@
status = "disabled";
};
- ehci at a0000 {
- compatible = "marvell,orion-ehci";
- reg = <0xa0000 0x1000>;
- interrupts = <12>;
- status = "disabled";
- };
-
- sata at 80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <29>;
- status = "disabled";
- };
-
- i2c at 11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <5>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
@@ -125,26 +111,6 @@
};
};
- crypto@90000 {
- compatible = "marvell,orion-crypto";
- reg = <0x90000 0x10000>,
- <0xf2200000 0x800>;
- reg-names = "regs", "sram";
- interrupts = <28>;
- status = "okay";
- };
-
- mdio: mdio-bus at 72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <22>;
- status = "disabled";
-
- /* add phy nodes in board file */
- };
-
eth: ethernet-controller at 72000 {
compatible = "marvell,orion-eth";
#address-cells = <1>;
@@ -162,5 +128,39 @@
/* set phy-handle property in board file */
};
};
+
+ mdio: mdio-bus at 72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <22>;
+ status = "disabled";
+
+ /* add phy nodes in board file */
+ };
+
+ sata at 80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ crypto at 90000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x90000 0x10000>,
+ <0xf2200000 0x800>;
+ reg-names = "regs", "sram";
+ interrupts = <28>;
+ status = "okay";
+ };
+
+ ehci at a0000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0xa0000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
};
};
--
1.8.5.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 4/4] ARM: mvebu: sort DT nodes by address
2013-12-12 15:25 ` [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address Jason Cooper
` (2 preceding siblings ...)
2013-12-12 15:25 ` [PATCH 3/4] ARM: orion5x: " Jason Cooper
@ 2013-12-12 15:25 ` Jason Cooper
2013-12-14 22:27 ` [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address Jason Cooper
2013-12-22 17:28 ` [PATCH] ARM: kirkwood: 6282: sort DT nodes by address Jason Cooper
5 siblings, 0 replies; 9+ messages in thread
From: Jason Cooper @ 2013-12-12 15:25 UTC (permalink / raw)
To: linux-arm-kernel
Prevent future unnecessary merge conflicts
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/armada-370-xp.dtsi | 176 +++++++++++++++++------------------
arch/arm/boot/dts/armada-370.dtsi | 74 +++++++--------
arch/arm/boot/dts/armada-xp.dtsi | 100 ++++++++++----------
3 files changed, 175 insertions(+), 175 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index f2b6ae4f55d0..46a541e626e7 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -103,22 +103,52 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
- mbusc: mbus-controller at 20000 {
- compatible = "marvell,mbus-controller";
- reg = <0x20000 0x100>, <0x20180 0x20>;
+ rtc at 10300 {
+ compatible = "marvell,orion-rtc";
+ reg = <0x10300 0x20>;
+ interrupts = <50>;
};
- mpic: interrupt-controller at 20000 {
- compatible = "marvell,mpic";
- #interrupt-cells = <1>;
- #size-cells = <1>;
- interrupt-controller;
- msi-controller;
+ spi0: spi at 10600 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10600 0x28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <30>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
};
- coherency-fabric at 20200 {
- compatible = "marvell,coherency-fabric";
- reg = <0x20200 0xb0>, <0x21810 0x1c>;
+ spi1: spi at 10680 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10680 0x28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <92>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c at 11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <31>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <32>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
};
serial at 12000 {
@@ -146,25 +176,41 @@
clock-output-names = "nand";
};
+ mbusc: mbus-controller at 20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ mpic: interrupt-controller at 20000 {
+ compatible = "marvell,mpic";
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
+
+ coherency-fabric at 20200 {
+ compatible = "marvell,coherency-fabric";
+ reg = <0x20200 0xb0>, <0x21810 0x1c>;
+ };
+
timer at 20300 {
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
};
- sata at a0000 {
- compatible = "marvell,orion-sata";
- reg = <0xa0000 0x5000>;
- interrupts = <55>;
- clocks = <&gateclk 15>, <&gateclk 30>;
- clock-names = "0", "1";
+ usb at 50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x500>;
+ interrupts = <45>;
status = "disabled";
};
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x72004 0x4>;
+ usb at 51000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x51000 0x500>;
+ interrupts = <46>;
+ status = "disabled";
};
eth0: ethernet at 70000 {
@@ -175,6 +221,13 @@
status = "disabled";
};
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x72004 0x4>;
+ };
+
eth1: ethernet at 74000 {
compatible = "marvell,armada-370-neta";
reg = <0x74000 0x4000>;
@@ -183,32 +236,25 @@
status = "disabled";
};
- i2c0: i2c at 11000 {
- compatible = "marvell,mv64xxx-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <31>;
- timeout-ms = <1000>;
- clocks = <&coreclk 0>;
+ sata at a0000 {
+ compatible = "marvell,orion-sata";
+ reg = <0xa0000 0x5000>;
+ interrupts = <55>;
+ clocks = <&gateclk 15>, <&gateclk 30>;
+ clock-names = "0", "1";
status = "disabled";
};
- i2c1: i2c at 11100 {
- compatible = "marvell,mv64xxx-i2c";
+ nand at d0000 {
+ compatible = "marvell,armada370-nand";
+ reg = <0xd0000 0x54>;
#address-cells = <1>;
- #size-cells = <0>;
- interrupts = <32>;
- timeout-ms = <1000>;
- clocks = <&coreclk 0>;
+ #size-cells = <1>;
+ interrupts = <113>;
+ clocks = <&coredivclk 0>;
status = "disabled";
};
- rtc at 10300 {
- compatible = "marvell,orion-rtc";
- reg = <0x10300 0x20>;
- interrupts = <50>;
- };
-
mvsdio at d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
@@ -220,52 +266,6 @@
cap-mmc-highspeed;
status = "disabled";
};
-
- usb at 50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x500>;
- interrupts = <45>;
- status = "disabled";
- };
-
- usb at 51000 {
- compatible = "marvell,orion-ehci";
- reg = <0x51000 0x500>;
- interrupts = <46>;
- status = "disabled";
- };
-
- spi0: spi at 10600 {
- compatible = "marvell,orion-spi";
- reg = <0x10600 0x28>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <30>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- spi1: spi at 10680 {
- compatible = "marvell,orion-spi";
- reg = <0x10680 0x28>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- interrupts = <92>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- nand at d0000 {
- compatible = "marvell,armada370-nand";
- reg = <0xd0000 0x54>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupts = <113>;
- clocks = <&coredivclk 0>;
- status = "disabled";
- };
};
};
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 7a4b82e71aaf..0d8530c98cf5 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -91,11 +91,6 @@
};
internal-regs {
- system-controller at 18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x100>;
- };
-
L2: l2-cache {
compatible = "marvell,aurora-outer-cache";
reg = <0x08000 0x1000>;
@@ -103,8 +98,17 @@
wt-override;
};
- interrupt-controller at 20000 {
- reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+ i2c0: i2c at 11000 {
+ reg = <0x11000 0x20>;
+ };
+
+ i2c1: i2c at 11100 {
+ reg = <0x11100 0x20>;
+ };
+
+ system-controller at 18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x100>;
};
pinctrl {
@@ -163,9 +167,11 @@
interrupts = <91>;
};
- timer at 20300 {
- compatible = "marvell,armada-370-timer";
- clocks = <&coreclk 2>;
+ gateclk: clock-gating-control at 18220 {
+ compatible = "marvell,armada-370-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
};
coreclk: mvebu-sar at 18230 {
@@ -174,11 +180,28 @@
#clock-cells = <1>;
};
- gateclk: clock-gating-control at 18220 {
- compatible = "marvell,armada-370-gating-clock";
- reg = <0x18220 0x4>;
+ thermal at 18300 {
+ compatible = "marvell,armada370-thermal";
+ reg = <0x18300 0x4
+ 0x18304 0x4>;
+ status = "okay";
+ };
+
+ interrupt-controller at 20000 {
+ reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+ };
+
+ timer at 20300 {
+ compatible = "marvell,armada-370-timer";
+ clocks = <&coreclk 2>;
+ };
+
+ usb at 50000 {
+ clocks = <&coreclk 0>;
+ };
+
+ usb at 51000 {
clocks = <&coreclk 0>;
- #clock-cells = <1>;
};
xor at 60800 {
@@ -218,29 +241,6 @@
dmacap,memset;
};
};
-
- i2c0: i2c at 11000 {
- reg = <0x11000 0x20>;
- };
-
- i2c1: i2c at 11100 {
- reg = <0x11100 0x20>;
- };
-
- usb at 50000 {
- clocks = <&coreclk 0>;
- };
-
- usb at 51000 {
- clocks = <&coreclk 0>;
- };
-
- thermal at 18300 {
- compatible = "marvell,armada370-thermal";
- reg = <0x18300 0x4
- 0x18304 0x4>;
- status = "okay";
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 281c6447e872..4919fb82ac62 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -42,13 +42,14 @@
wt-override;
};
- interrupt-controller at 20000 {
- reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ i2c0: i2c at 11000 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x100>;
};
- armada-370-xp-pmsu at 22000 {
- compatible = "marvell,armada-370-xp-pmsu";
- reg = <0x22100 0x430>, <0x20800 0x20>;
+ i2c1: i2c at 11100 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x100>;
};
serial at 12200 {
@@ -68,10 +69,16 @@
status = "disabled";
};
- timer at 20300 {
- compatible = "marvell,armada-xp-timer";
- clocks = <&coreclk 2>, <&refclk>;
- clock-names = "nbclk", "fixed";
+ system-controller at 18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x500>;
+ };
+
+ gateclk: clock-gating-control at 18220 {
+ compatible = "marvell,armada-xp-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
};
coreclk: mvebu-sar at 18230 {
@@ -80,6 +87,13 @@
#clock-cells = <1>;
};
+ thermal at 182b0 {
+ compatible = "marvell,armadaxp-thermal";
+ reg = <0x182b0 0x4
+ 0x184d0 0x4>;
+ status = "okay";
+ };
+
cpuclk: clock-complex at 18700 {
#clock-cells = <1>;
compatible = "marvell,armada-xp-cpu-clock";
@@ -87,16 +101,19 @@
clocks = <&coreclk 1>;
};
- gateclk: clock-gating-control at 18220 {
- compatible = "marvell,armada-xp-gating-clock";
- reg = <0x18220 0x4>;
- clocks = <&coreclk 0>;
- #clock-cells = <1>;
+ interrupt-controller at 20000 {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
};
- system-controller at 18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x500>;
+ timer at 20300 {
+ compatible = "marvell,armada-xp-timer";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+ };
+
+ armada-370-xp-pmsu at 22000 {
+ compatible = "marvell,armada-370-xp-pmsu";
+ reg = <0x22100 0x430>, <0x20800 0x20>;
};
eth2: ethernet at 30000 {
@@ -107,6 +124,22 @@
status = "disabled";
};
+ usb at 50000 {
+ clocks = <&gateclk 18>;
+ };
+
+ usb at 51000 {
+ clocks = <&gateclk 19>;
+ };
+
+ usb at 52000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x52000 0x500>;
+ interrupts = <47>;
+ clocks = <&gateclk 20>;
+ status = "disabled";
+ };
+
xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
@@ -146,39 +179,6 @@
dmacap,memset;
};
};
-
- i2c0: i2c@11000 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- i2c1: i2c at 11100 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
- usb at 50000 {
- clocks = <&gateclk 18>;
- };
-
- usb at 51000 {
- clocks = <&gateclk 19>;
- };
-
- usb at 52000 {
- compatible = "marvell,orion-ehci";
- reg = <0x52000 0x500>;
- interrupts = <47>;
- clocks = <&gateclk 20>;
- status = "disabled";
- };
-
- thermal at 182b0 {
- compatible = "marvell,armadaxp-thermal";
- reg = <0x182b0 0x4
- 0x184d0 0x4>;
- status = "okay";
- };
};
};
--
1.8.5.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address
2013-12-12 15:25 ` [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address Jason Cooper
` (3 preceding siblings ...)
2013-12-12 15:25 ` [PATCH 4/4] ARM: mvebu: " Jason Cooper
@ 2013-12-14 22:27 ` Jason Cooper
2013-12-22 17:28 ` [PATCH] ARM: kirkwood: 6282: sort DT nodes by address Jason Cooper
5 siblings, 0 replies; 9+ messages in thread
From: Jason Cooper @ 2013-12-14 22:27 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 12, 2013 at 03:25:15PM +0000, Jason Cooper wrote:
> Olof, all,
>
> I love December! I'm getting around to some of the items on my -onice folder.
> Namely, this one:
>
> On Thu, Aug 15, 2013 at 11:15:00PM -0700, Olof Johansson wrote:
> > On Wed, Aug 14, 2013 at 02:59:45PM -0400, Jason Cooper wrote:
> ...
> > > diff --cc arch/arm/boot/dts/kirkwood.dtsi
> > > index 70f414d,1d6921d..6489b98
> > > --- a/arch/arm/boot/dts/kirkwood.dtsi
> > > +++ b/arch/arm/boot/dts/kirkwood.dtsi
> > > @@@ -47,11 -30,30 +40,35 @@@
> > > #address-cells = <1>;
> > > #size-cells = <1>;
> > >
> > > + timer: timer at 20300 {
> > > + compatible = "marvell,orion-timer";
> > > + reg = <0x20300 0x20>;
> > > + interrupt-parent = <&bridge_intc>;
> > > + interrupts = <1>, <2>;
> > > + clocks = <&core_clk 0>;
> > > + };
> > > +
> > > + intc: main-interrupt-ctrl at 20200 {
> > > + compatible = "marvell,orion-intc";
> > > + interrupt-controller;
> > > + #interrupt-cells = <1>;
> > > + reg = <0x20200 0x10>, <0x20210 0x10>;
> > > + };
> > > +
> > > + bridge_intc: bridge-interrupt-ctrl at 20110 {
> > > + compatible = "marvell,orion-bridge-intc";
> > > + interrupt-controller;
> > > + #interrupt-cells = <1>;
> > > + reg = <0x20110 0x8>;
> > > + interrupts = <1>;
> > > + marvell,#interrupts = <6>;
> > > + };
> > > +
> > > + mbusc: mbus-controller at 20000 {
> > > + compatible = "marvell,mbus-controller";
> > > + reg = <0x20000 0x80>, <0x1500 0x20>;
> > > + };
> > > +
> > > core_clk: core-clocks at 10030 {
> > > compatible = "marvell,kirkwood-core-clock";
> > > reg = <0x10030 0x4>;
> >
> > This file is a real mess. :( Nothing is sorted properly under the ocp/ bus.
> > It's common to sort by memory address. Or I'd even take alphabetically if
> > there was a good reason to do so. Just some order of some kind.
>
> Done.
>
> thx,
>
> Jason.
>
> Jason Cooper (4):
> ARM: kirkwood: sort dt nodes by address
> ARM: dove: sort DT nodes by address
> ARM: orion5x: sort DT nodes by address
> ARM: mvebu: sort DT nodes by address
>
> arch/arm/boot/dts/armada-370-xp.dtsi | 176 ++++++-------
> arch/arm/boot/dts/armada-370.dtsi | 74 +++---
> arch/arm/boot/dts/armada-xp.dtsi | 100 +++----
> arch/arm/boot/dts/dove.dtsi | 496 +++++++++++++++++------------------
> arch/arm/boot/dts/kirkwood.dtsi | 140 +++++-----
> arch/arm/boot/dts/orion5x.dtsi | 106 ++++----
> 6 files changed, 546 insertions(+), 546 deletions(-)
Series applied to mvebu/dt
And Jason, next time, don't take so long. :)
thx,
Jason.
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH] ARM: kirkwood: 6282: sort DT nodes by address
2013-12-12 15:25 ` [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address Jason Cooper
` (4 preceding siblings ...)
2013-12-14 22:27 ` [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address Jason Cooper
@ 2013-12-22 17:28 ` Jason Cooper
5 siblings, 0 replies; 9+ messages in thread
From: Jason Cooper @ 2013-12-22 17:28 UTC (permalink / raw)
To: linux-arm-kernel
We recently sorted the nodes in dove, orion5x, kirkwood, and armada
370/xp. However, I missed this file. -6281 is fine.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
This is just an fyi, Andrew's patch adding the phy nodes brought this to my
attention. I've applied this to mvebu/dt.
thx,
Jason.
arch/arm/boot/dts/kirkwood-6282.dtsi | 35 +++++++++++++++++------------------
1 file changed, 17 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index a4fec0432168..2902e0d7971d 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -104,6 +104,12 @@
};
};
+ thermal at 10078 {
+ compatible = "marvell,kirkwood-thermal";
+ reg = <0x10078 0x4>;
+ status = "okay";
+ };
+
rtc at 10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
@@ -111,6 +117,17 @@
clocks = <&gate_clk 7>;
};
+ i2c at 11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <32>;
+ clock-frequency = <100000>;
+ clocks = <&gate_clk 7>;
+ status = "disabled";
+ };
+
sata at 80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
@@ -135,23 +152,5 @@
cap-mmc-highspeed;
status = "disabled";
};
-
- thermal at 10078 {
- compatible = "marvell,kirkwood-thermal";
- reg = <0x10078 0x4>;
- status = "okay";
- };
-
- i2c at 11100 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <32>;
- clock-frequency = <100000>;
- clocks = <&gate_clk 7>;
- status = "disabled";
- };
-
};
};
--
1.8.5.2
^ permalink raw reply related [flat|nested] 9+ messages in thread