From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] introducing Atmel sama5d2 SoC
Date: Thu, 18 Jun 2015 15:18:27 +0200 [thread overview]
Message-ID: <cover.1434632966.git.nicolas.ferre@atmel.com> (raw)
Hi,
This is a little series to introduce the new Atmel Cortex-A5 sama5d2 SoC.
The product is not yet announced so you cannot find the datasheet yet. But be
sure to find it when it's released at the usual location: atmel.com!
The support is basic for now but allows to boot the chip and use the sama5d2
Xplained board.
This series is dependent on other patches sent for clocks (PMC + generic
clocks), irqchip and Ethernet. These patches will hopefuly progress as this
series goes upstream and is finaly merged in arm-soc.
More material is on its way to being published or already under review (like
the flexcom for instance). Stay tunned for more fun!
Ludovic Desroches (1):
ARM: at91/dt: add basic dtsi for sama5d2 SoC
Nicolas Ferre (2):
ARM: at91/soc: add basic support for new sama5d2 SoC
ARM: at91/dt: add minimal sama5d2 Xplained board
Documentation/arm/Atmel/README | 6 +
.../devicetree/bindings/arm/atmel-at91.txt | 2 +
arch/arm/Kconfig.debug | 6 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 113 +++
arch/arm/boot/dts/sama5d2.dtsi | 843 +++++++++++++++++++++
arch/arm/include/debug/at91.S | 5 +-
arch/arm/mach-at91/Kconfig | 12 +
arch/arm/mach-at91/sama5.c | 3 +
arch/arm/mach-at91/soc.h | 3 +
10 files changed, 993 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/at91-sama5d2_xplained.dts
create mode 100644 arch/arm/boot/dts/sama5d2.dtsi
--
2.1.3
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
<linux-arm-kernel@lists.infradead.org>
Cc: <linux-kernel@vger.kernel.org>, Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [PATCH 0/3] introducing Atmel sama5d2 SoC
Date: Thu, 18 Jun 2015 15:18:27 +0200 [thread overview]
Message-ID: <cover.1434632966.git.nicolas.ferre@atmel.com> (raw)
Hi,
This is a little series to introduce the new Atmel Cortex-A5 sama5d2 SoC.
The product is not yet announced so you cannot find the datasheet yet. But be
sure to find it when it's released at the usual location: atmel.com!
The support is basic for now but allows to boot the chip and use the sama5d2
Xplained board.
This series is dependent on other patches sent for clocks (PMC + generic
clocks), irqchip and Ethernet. These patches will hopefuly progress as this
series goes upstream and is finaly merged in arm-soc.
More material is on its way to being published or already under review (like
the flexcom for instance). Stay tunned for more fun!
Ludovic Desroches (1):
ARM: at91/dt: add basic dtsi for sama5d2 SoC
Nicolas Ferre (2):
ARM: at91/soc: add basic support for new sama5d2 SoC
ARM: at91/dt: add minimal sama5d2 Xplained board
Documentation/arm/Atmel/README | 6 +
.../devicetree/bindings/arm/atmel-at91.txt | 2 +
arch/arm/Kconfig.debug | 6 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 113 +++
arch/arm/boot/dts/sama5d2.dtsi | 843 +++++++++++++++++++++
arch/arm/include/debug/at91.S | 5 +-
arch/arm/mach-at91/Kconfig | 12 +
arch/arm/mach-at91/sama5.c | 3 +
arch/arm/mach-at91/soc.h | 3 +
10 files changed, 993 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/at91-sama5d2_xplained.dts
create mode 100644 arch/arm/boot/dts/sama5d2.dtsi
--
2.1.3
next reply other threads:[~2015-06-18 13:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 13:18 Nicolas Ferre [this message]
2015-06-18 13:18 ` [PATCH 0/3] introducing Atmel sama5d2 SoC Nicolas Ferre
2015-06-18 13:18 ` [PATCH 1/3] ARM: at91/soc: add basic support for new " Nicolas Ferre
2015-06-18 13:18 ` Nicolas Ferre
2015-06-18 15:21 ` Alexandre Belloni
2015-06-18 15:21 ` Alexandre Belloni
2015-06-29 12:46 ` Nicolas Ferre
2015-06-29 12:46 ` Nicolas Ferre
2015-06-29 15:04 ` Alexandre Belloni
2015-06-29 15:04 ` Alexandre Belloni
2015-07-28 8:54 ` Nicolas Ferre
2015-07-28 8:54 ` Nicolas Ferre
2015-07-28 9:38 ` Nicolas Ferre
2015-07-28 9:38 ` Nicolas Ferre
2015-06-18 13:18 ` [PATCH 2/3] ARM: at91/dt: add basic dtsi for " Nicolas Ferre
2015-06-18 13:18 ` Nicolas Ferre
2015-06-18 13:18 ` [PATCH 3/3] ARM: at91/dt: add minimal sama5d2 Xplained board Nicolas Ferre
2015-06-18 13:18 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1434632966.git.nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.