From: Marcel Ziswiler <marcel@ziswiler.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/16] assortment of tegra fixes/enhancements
Date: Tue, 21 Jul 2015 00:35:34 +0200 [thread overview]
Message-ID: <cover.1437426110.git.marcel.ziswiler@toradex.com> (raw)
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This patch set is an assortment of tegra fixes/enhancements distilled
straight from our downstream integration work.
Changes in v2:
- dropped Colibri T20 specific ONFI detection enablement patch (formerly
9) as I noticed this already being done globally as part of
tegra20-common.h
- enable UBI/UBIFS support (11)
- limit TFTP block size (13) on Colibri T20 to 1536 due to issues
observed otherwise
- drop unrelated clean-up in (3) to be done as part of a separate
patch (14)
- new patch (15) fixing nRESET_OUT
- new patch (16) fixing USB DM regression on Apalis/Colibri T30
Marcel Ziswiler (15):
ARM: tegra: allow custom usb manufacturer/product/vendor ids/strings
ARM: tegra: allow reading recovery mode boot type
apalis/colibri_t20/t30: integrate recovery mode detection
colibri_t20: fix device-tree compatible node
colibri_t20: add lcd display support
colibri_t20: add i2c support
colibri_t20: disable PMIC sleep mode on low supply voltage
tegra: nand: fix read_byte required for proper onfi detection
mtd/nand/tegra: alignment workaround
colibri_t20: enable mtdparts support
colibri_t20: enable ubi/ubifs support
apalis/colibri_t20/t30: enable raw initrd support
apalis/colibri_t20/30: clean-up
colibri_t20: fix reset out pin
apalis/colibri_t30: fix usb dm regression
Max Krummenacher (1):
apalis/colibri_t20/t30: increase tftp blocksize
arch/arm/dts/tegra20-colibri.dts | 63 ++++++++++++++-
arch/arm/dts/tegra30-apalis.dts | 2 +-
arch/arm/dts/tegra30-colibri.dts | 4 +-
arch/arm/include/asm/arch-tegra/tegra.h | 2 +
board/toradex/apalis_t30/apalis_t30.c | 15 +++-
board/toradex/colibri_t20/colibri_t20.c | 68 +++++++++++++++++
board/toradex/colibri_t30/colibri_t30.c | 18 ++++-
drivers/mtd/nand/tegra_nand.c | 122 ++++++++++--------------------
include/configs/apalis_t30.h | 16 +++-
include/configs/colibri_t20.h | 56 ++++++++++++--
include/configs/colibri_t30.h | 16 +++-
include/configs/tegra-common-usb-gadget.h | 6 ++
12 files changed, 287 insertions(+), 101 deletions(-)
--
2.4.3
next reply other threads:[~2015-07-20 22:35 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-20 22:35 Marcel Ziswiler [this message]
2015-07-20 22:35 ` [U-Boot] [PATCH v2 01/16] ARM: tegra: allow custom usb manufacturer/product/vendor ids/strings Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 02/16] ARM: tegra: allow reading recovery mode boot type Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 03/16] apalis/colibri_t20/t30: integrate recovery mode detection Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 04/16] colibri_t20: fix device-tree compatible node Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 05/16] colibri_t20: add lcd display support Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 06/16] colibri_t20: add i2c support Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 07/16] colibri_t20: disable PMIC sleep mode on low supply voltage Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 08/16] tegra: nand: fix read_byte required for proper onfi detection Marcel Ziswiler
2015-07-27 20:00 ` Scott Wood
2015-07-28 2:05 ` Marcel Ziswiler
2015-07-28 2:17 ` Scott Wood
2015-07-20 22:35 ` [U-Boot] [PATCH v2 09/16] mtd/nand/tegra: alignment workaround Marcel Ziswiler
2015-07-27 19:57 ` Scott Wood
2015-07-27 23:28 ` Simon Glass
2015-07-27 23:32 ` Scott Wood
2015-07-28 2:09 ` Marcel Ziswiler
2015-07-28 1:55 ` Marcel Ziswiler
2015-07-28 2:15 ` Scott Wood
2015-08-05 22:12 ` Marcel Ziswiler
2015-08-05 22:16 ` Scott Wood
2015-07-20 22:35 ` [U-Boot] [PATCH v2 10/16] colibri_t20: enable mtdparts support Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 11/16] colibri_t20: enable ubi/ubifs support Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 12/16] apalis/colibri_t20/t30: enable raw initrd support Marcel Ziswiler
2015-07-27 19:45 ` Stephen Warren
2015-07-28 1:27 ` Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 13/16] apalis/colibri_t20/t30: increase tftp blocksize Marcel Ziswiler
2015-07-27 19:46 ` Stephen Warren
2015-07-28 1:38 ` Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 14/16] apalis/colibri_t20/30: clean-up Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 15/16] colibri_t20: fix reset out pin Marcel Ziswiler
2015-07-20 22:35 ` [U-Boot] [PATCH v2 16/16] apalis/colibri_t30: fix usb dm regression Marcel Ziswiler
2015-07-27 19:48 ` Stephen Warren
2015-07-28 1:44 ` Marcel Ziswiler
2015-07-27 19:49 ` [U-Boot] [PATCH v2 00/16] assortment of tegra fixes/enhancements Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1437426110.git.marcel.ziswiler@toradex.com \
--to=marcel@ziswiler.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.