From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
To: <nicolas.ferre@atmel.com>, <broonie@kernel.org>,
<linux-spi@vger.kernel.org>, <dwmw2@infradead.org>,
<computersforpeace@gmail.com>, <zajec5@gmail.com>,
<beanhuo@micron.com>, <juhosg@openwrt.org>, <marex@denx.de>,
<shijie.huang@intel.com>, <ben@decadent.org.uk>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
<linux-mtd@lists.infradead.org>,
Cyrille Pitchen <cyrille.pitchen@atmel.com>
Subject: [PATCH v3 0/5] add driver for Atmel QSPI controller
Date: Mon, 27 Jul 2015 10:59:39 +0200 [thread overview]
Message-ID: <cover.1437986785.git.cyrille.pitchen@atmel.com> (raw)
ChangeLog
v3:
- reword the comment which explains that spi_nor_set_protocol() is used by
the spi-nor framework to notify lower layers, especially the (Q)SPI
controller about a protocol change.
- change the definitions of register/bitfield macros in the Atmel QSPI
controller driver: get rid of concatenation operator and use BIT and
GENMASK macros when possible.
- use #define[SPACE] instead of #define[TAB]
v2:
- remove the patches to set the "latency code" of Spansion QSPI memories
(support of Spansion memories may be submitted in later series).
- rename "qspi" node into "spi" in the DT example to fit ePAPR standard.
- remove the useless "qspi0" label from the DT node example.
- remove the leading 0 from the size of the second memory region to make
it consistent with the size of the first memory region.
- indent the DT bindings documentation to make it more readable.
- remove the useless ".bus = &platform_bus_type," line from the
platform driver definition.
v1:
This series of patches add support for the new Atmel QSPI controller
embedded inside sama5d2x SoCs.
These patches were first developped for linux-3.18-at91 and tested on a
sama5d27 Xplained ultra board, which embeds a Micron n25q128a13 QSPI NOR
flash memory. Then the series was adapted for mainline.
Cyrille Pitchen (5):
mtd: spi-nor: notify (Q)SPI controller about protocol change
Documentation: mtd: add a DT property to set the number of dummy
cycles
mtd: spi-nor: allow to tune the number of dummy cycles
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
.../devicetree/bindings/mtd/jedec,spi-nor.txt | 6 +
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 877 +++++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 118 ++-
include/linux/mtd/spi-nor.h | 15 +
7 files changed, 1034 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Cyrille Pitchen <cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
<broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
<zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
<beanhuo-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org>,
<juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>,
<marex-ynQEQJNshbs@public.gmane.org>,
<shijie.huang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
<ben-/+tVBieCtBitmTQ+vhA3Yw@public.gmane.org>
Cc: <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
<pawel.moll-5wv7dgnIgG8@public.gmane.org>,
<mark.rutland-5wv7dgnIgG8@public.gmane.org>,
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
<galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
<linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
Cyrille Pitchen
<cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 0/5] add driver for Atmel QSPI controller
Date: Mon, 27 Jul 2015 10:59:39 +0200 [thread overview]
Message-ID: <cover.1437986785.git.cyrille.pitchen@atmel.com> (raw)
ChangeLog
v3:
- reword the comment which explains that spi_nor_set_protocol() is used by
the spi-nor framework to notify lower layers, especially the (Q)SPI
controller about a protocol change.
- change the definitions of register/bitfield macros in the Atmel QSPI
controller driver: get rid of concatenation operator and use BIT and
GENMASK macros when possible.
- use #define[SPACE] instead of #define[TAB]
v2:
- remove the patches to set the "latency code" of Spansion QSPI memories
(support of Spansion memories may be submitted in later series).
- rename "qspi" node into "spi" in the DT example to fit ePAPR standard.
- remove the useless "qspi0" label from the DT node example.
- remove the leading 0 from the size of the second memory region to make
it consistent with the size of the first memory region.
- indent the DT bindings documentation to make it more readable.
- remove the useless ".bus = &platform_bus_type," line from the
platform driver definition.
v1:
This series of patches add support for the new Atmel QSPI controller
embedded inside sama5d2x SoCs.
These patches were first developped for linux-3.18-at91 and tested on a
sama5d27 Xplained ultra board, which embeds a Micron n25q128a13 QSPI NOR
flash memory. Then the series was adapted for mainline.
Cyrille Pitchen (5):
mtd: spi-nor: notify (Q)SPI controller about protocol change
Documentation: mtd: add a DT property to set the number of dummy
cycles
mtd: spi-nor: allow to tune the number of dummy cycles
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
.../devicetree/bindings/mtd/jedec,spi-nor.txt | 6 +
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 877 +++++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 118 ++-
include/linux/mtd/spi-nor.h | 15 +
7 files changed, 1034 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: cyrille.pitchen@atmel.com (Cyrille Pitchen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/5] add driver for Atmel QSPI controller
Date: Mon, 27 Jul 2015 10:59:39 +0200 [thread overview]
Message-ID: <cover.1437986785.git.cyrille.pitchen@atmel.com> (raw)
ChangeLog
v3:
- reword the comment which explains that spi_nor_set_protocol() is used by
the spi-nor framework to notify lower layers, especially the (Q)SPI
controller about a protocol change.
- change the definitions of register/bitfield macros in the Atmel QSPI
controller driver: get rid of concatenation operator and use BIT and
GENMASK macros when possible.
- use #define[SPACE] instead of #define[TAB]
v2:
- remove the patches to set the "latency code" of Spansion QSPI memories
(support of Spansion memories may be submitted in later series).
- rename "qspi" node into "spi" in the DT example to fit ePAPR standard.
- remove the useless "qspi0" label from the DT node example.
- remove the leading 0 from the size of the second memory region to make
it consistent with the size of the first memory region.
- indent the DT bindings documentation to make it more readable.
- remove the useless ".bus = &platform_bus_type," line from the
platform driver definition.
v1:
This series of patches add support for the new Atmel QSPI controller
embedded inside sama5d2x SoCs.
These patches were first developped for linux-3.18-at91 and tested on a
sama5d27 Xplained ultra board, which embeds a Micron n25q128a13 QSPI NOR
flash memory. Then the series was adapted for mainline.
Cyrille Pitchen (5):
mtd: spi-nor: notify (Q)SPI controller about protocol change
Documentation: mtd: add a DT property to set the number of dummy
cycles
mtd: spi-nor: allow to tune the number of dummy cycles
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
.../devicetree/bindings/mtd/jedec,spi-nor.txt | 6 +
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 877 +++++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 118 ++-
include/linux/mtd/spi-nor.h | 15 +
7 files changed, 1034 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Cyrille Pitchen <cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
beanhuo-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org,
juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org,
marex-ynQEQJNshbs@public.gmane.org,
shijie.huang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
ben-/+tVBieCtBitmTQ+vhA3Yw@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Cyrille Pitchen
<cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 0/5] add driver for Atmel QSPI controller
Date: Mon, 27 Jul 2015 10:59:39 +0200 [thread overview]
Message-ID: <cover.1437986785.git.cyrille.pitchen@atmel.com> (raw)
ChangeLog
v3:
- reword the comment which explains that spi_nor_set_protocol() is used by
the spi-nor framework to notify lower layers, especially the (Q)SPI
controller about a protocol change.
- change the definitions of register/bitfield macros in the Atmel QSPI
controller driver: get rid of concatenation operator and use BIT and
GENMASK macros when possible.
- use #define[SPACE] instead of #define[TAB]
v2:
- remove the patches to set the "latency code" of Spansion QSPI memories
(support of Spansion memories may be submitted in later series).
- rename "qspi" node into "spi" in the DT example to fit ePAPR standard.
- remove the useless "qspi0" label from the DT node example.
- remove the leading 0 from the size of the second memory region to make
it consistent with the size of the first memory region.
- indent the DT bindings documentation to make it more readable.
- remove the useless ".bus = &platform_bus_type," line from the
platform driver definition.
v1:
This series of patches add support for the new Atmel QSPI controller
embedded inside sama5d2x SoCs.
These patches were first developped for linux-3.18-at91 and tested on a
sama5d27 Xplained ultra board, which embeds a Micron n25q128a13 QSPI NOR
flash memory. Then the series was adapted for mainline.
Cyrille Pitchen (5):
mtd: spi-nor: notify (Q)SPI controller about protocol change
Documentation: mtd: add a DT property to set the number of dummy
cycles
mtd: spi-nor: allow to tune the number of dummy cycles
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
.../devicetree/bindings/mtd/jedec,spi-nor.txt | 6 +
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 877 +++++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 118 ++-
include/linux/mtd/spi-nor.h | 15 +
7 files changed, 1034 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-07-27 8:59 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-27 8:59 Cyrille Pitchen [this message]
2015-07-27 8:59 ` [PATCH v3 0/5] add driver for Atmel QSPI controller Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` [PATCH v3 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` [PATCH v3 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` [PATCH v3 3/5] mtd: spi-nor: allow to tune " Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` [PATCH v3 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-31 8:08 ` Nicolas Ferre
2015-07-31 8:08 ` Nicolas Ferre
2015-07-31 8:08 ` Nicolas Ferre
2015-07-31 8:08 ` Nicolas Ferre
2015-07-27 8:59 ` [PATCH v3 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-27 8:59 ` Cyrille Pitchen
2015-07-31 8:51 ` Nicolas Ferre
2015-07-31 8:51 ` Nicolas Ferre
2015-07-31 8:51 ` Nicolas Ferre
2015-07-31 8:51 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1437986785.git.cyrille.pitchen@atmel.com \
--to=cyrille.pitchen@atmel.com \
--cc=beanhuo@micron.com \
--cc=ben@decadent.org.uk \
--cc=broonie@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=juhosg@openwrt.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=marex@denx.de \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@atmel.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=shijie.huang@intel.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.