From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
To: <nicolas.ferre@atmel.com>, <broonie@kernel.org>,
<linux-spi@vger.kernel.org>, <dwmw2@infradead.org>,
<computersforpeace@gmail.com>, <zajec5@gmail.com>,
<beanhuo@micron.com>, <juhosg@openwrt.org>, <marex@denx.de>,
<ben@decadent.org.uk>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
<linux-mtd@lists.infradead.org>,
Cyrille Pitchen <cyrille.pitchen@atmel.com>
Subject: [linux-next RFC v7 0/6] mtd: spi-nor: improve support of QSPI nor
Date: Tue, 15 Sep 2015 17:27:58 +0200 [thread overview]
Message-ID: <cover.1442330503.git.cyrille.pitchen@atmel.com> (raw)
Hi all,
this series is still a work in progress though it is almost finished.
The support of Macronix dummy code to configure the number of dummy cycles
is still missing...
However I would like some feedbacks to synchronize this work with other
mtd / spi-nor improvements as I see lots of patches on the mailing list.
Best Regards,
Cyrille
Cyrille Pitchen (6):
mtd: spi-nor: remove unused read_xfer/write_xfer hooks
mtd: spi-nor: read JEDEC ID with multiple I/O protocols
mtd: spi-nor: set the read op code and protocol based on the
manufacturer
mtd: m25p80: add support of dual and quad spi protocols to all
commands
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
drivers/mtd/devices/m25p80.c | 262 ++++--
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 880 +++++++++++++++++++++
drivers/mtd/spi-nor/fsl-quadspi.c | 2 +-
drivers/mtd/spi-nor/nxp-spifi.c | 13 +-
drivers/mtd/spi-nor/spi-nor.c | 603 ++++++++++++--
include/linux/mtd/spi-nor.h | 68 +-
9 files changed, 1689 insertions(+), 176 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Cyrille Pitchen <cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
<broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
<zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
<beanhuo-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org>,
<juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>,
<marex-ynQEQJNshbs@public.gmane.org>,
<ben-/+tVBieCtBitmTQ+vhA3Yw@public.gmane.org>
Cc: <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
<pawel.moll-5wv7dgnIgG8@public.gmane.org>,
<mark.rutland-5wv7dgnIgG8@public.gmane.org>,
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
<galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
<linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
Cyrille Pitchen
<cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Subject: [linux-next RFC v7 0/6] mtd: spi-nor: improve support of QSPI nor
Date: Tue, 15 Sep 2015 17:27:58 +0200 [thread overview]
Message-ID: <cover.1442330503.git.cyrille.pitchen@atmel.com> (raw)
Hi all,
this series is still a work in progress though it is almost finished.
The support of Macronix dummy code to configure the number of dummy cycles
is still missing...
However I would like some feedbacks to synchronize this work with other
mtd / spi-nor improvements as I see lots of patches on the mailing list.
Best Regards,
Cyrille
Cyrille Pitchen (6):
mtd: spi-nor: remove unused read_xfer/write_xfer hooks
mtd: spi-nor: read JEDEC ID with multiple I/O protocols
mtd: spi-nor: set the read op code and protocol based on the
manufacturer
mtd: m25p80: add support of dual and quad spi protocols to all
commands
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
drivers/mtd/devices/m25p80.c | 262 ++++--
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 880 +++++++++++++++++++++
drivers/mtd/spi-nor/fsl-quadspi.c | 2 +-
drivers/mtd/spi-nor/nxp-spifi.c | 13 +-
drivers/mtd/spi-nor/spi-nor.c | 603 ++++++++++++--
include/linux/mtd/spi-nor.h | 68 +-
9 files changed, 1689 insertions(+), 176 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: cyrille.pitchen@atmel.com (Cyrille Pitchen)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-next RFC v7 0/6] mtd: spi-nor: improve support of QSPI nor
Date: Tue, 15 Sep 2015 17:27:58 +0200 [thread overview]
Message-ID: <cover.1442330503.git.cyrille.pitchen@atmel.com> (raw)
Hi all,
this series is still a work in progress though it is almost finished.
The support of Macronix dummy code to configure the number of dummy cycles
is still missing...
However I would like some feedbacks to synchronize this work with other
mtd / spi-nor improvements as I see lots of patches on the mailing list.
Best Regards,
Cyrille
Cyrille Pitchen (6):
mtd: spi-nor: remove unused read_xfer/write_xfer hooks
mtd: spi-nor: read JEDEC ID with multiple I/O protocols
mtd: spi-nor: set the read op code and protocol based on the
manufacturer
mtd: m25p80: add support of dual and quad spi protocols to all
commands
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
drivers/mtd/devices/m25p80.c | 262 ++++--
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 880 +++++++++++++++++++++
drivers/mtd/spi-nor/fsl-quadspi.c | 2 +-
drivers/mtd/spi-nor/nxp-spifi.c | 13 +-
drivers/mtd/spi-nor/spi-nor.c | 603 ++++++++++++--
include/linux/mtd/spi-nor.h | 68 +-
9 files changed, 1689 insertions(+), 176 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Cyrille Pitchen <cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
beanhuo-AL4WhLSQfzjQT0dZR+AlfA@public.gmane.org,
juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org,
marex-ynQEQJNshbs@public.gmane.org,
ben-/+tVBieCtBitmTQ+vhA3Yw@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Cyrille Pitchen
<cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Subject: [linux-next RFC v7 0/6] mtd: spi-nor: improve support of QSPI nor
Date: Tue, 15 Sep 2015 17:27:58 +0200 [thread overview]
Message-ID: <cover.1442330503.git.cyrille.pitchen@atmel.com> (raw)
Hi all,
this series is still a work in progress though it is almost finished.
The support of Macronix dummy code to configure the number of dummy cycles
is still missing...
However I would like some feedbacks to synchronize this work with other
mtd / spi-nor improvements as I see lots of patches on the mailing list.
Best Regards,
Cyrille
Cyrille Pitchen (6):
mtd: spi-nor: remove unused read_xfer/write_xfer hooks
mtd: spi-nor: read JEDEC ID with multiple I/O protocols
mtd: spi-nor: set the read op code and protocol based on the
manufacturer
mtd: m25p80: add support of dual and quad spi protocols to all
commands
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
drivers/mtd/devices/m25p80.c | 262 ++++--
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 880 +++++++++++++++++++++
drivers/mtd/spi-nor/fsl-quadspi.c | 2 +-
drivers/mtd/spi-nor/nxp-spifi.c | 13 +-
drivers/mtd/spi-nor/spi-nor.c | 603 ++++++++++++--
include/linux/mtd/spi-nor.h | 68 +-
9 files changed, 1689 insertions(+), 176 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-09-15 15:27 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-15 15:27 Cyrille Pitchen [this message]
2015-09-15 15:27 ` [linux-next RFC v7 0/6] mtd: spi-nor: improve support of QSPI nor Cyrille Pitchen
2015-09-15 15:27 ` Cyrille Pitchen
2015-09-15 15:27 ` Cyrille Pitchen
2015-09-15 15:27 ` [linux-next RFC v7 1/6] mtd: spi-nor: remove unused read_xfer/write_xfer hooks Cyrille Pitchen
2015-09-15 15:27 ` Cyrille Pitchen
2015-09-15 15:27 ` Cyrille Pitchen
2015-09-15 15:27 ` Cyrille Pitchen
2015-09-15 15:28 ` [linux-next RFC v7 2/6] mtd: spi-nor: read JEDEC ID with multiple I/O protocols Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 17:53 ` Jagan Teki
2015-09-15 17:53 ` Jagan Teki
2015-09-16 8:34 ` Cyrille Pitchen
2015-09-16 8:34 ` Cyrille Pitchen
2015-09-16 8:34 ` Cyrille Pitchen
2015-09-15 15:28 ` [linux-next RFC v7 3/6] mtd: spi-nor: set the read op code and protocol based on the manufacturer Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` [linux-next RFC v7 4/6] mtd: m25p80: add support of dual and quad spi protocols to all commands Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` [linux-next RFC v7 5/6] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` [linux-next RFC v7 6/6] mtd: atmel-quadspi: add driver for Atmel QSPI controller Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
2015-09-15 15:28 ` Cyrille Pitchen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1442330503.git.cyrille.pitchen@atmel.com \
--to=cyrille.pitchen@atmel.com \
--cc=beanhuo@micron.com \
--cc=ben@decadent.org.uk \
--cc=broonie@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=juhosg@openwrt.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=marex@denx.de \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@atmel.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.