[PATCH 0/2] linux-yocto: consolidated pull request

[PATCH 0/2] linux-yocto: consolidated pull request

[Bruce Ashfield]

Saul/Richard,

I'm batching two changes that I've been testing together.

The first is explained by the patch itself, but basically it
allows us to map multiple BSPs onto a single branch for building.
There's no impact to existing BSPs, but as we go forward it means
that if boards only differ by configuration we can avoid branch
explosion in the kernel repo and pickup their different 
configurations. If at any point we need to break them out from
using a common branch, that is an easy switch to do. I've been
testing this with a test enablement of the atom-pc using the
yocto/standar/base branch .. and it works nicely.

The second is an update to pickup Tom's patches for the emenlow.
Tom will follow up with changes to have the emenlow use the
2.6.37 kernel as well as the 2.6.34 kernel.

These are based on top of the beagleboard commits I sent on
Friday, which I've heard are working their way through the
queue. 

Pull URL: git://git.pokylinux.org/poky-contrib.git
  Branch: zedd/kernel
  Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/kernel

Thanks,
    Bruce Ashfield <bruce.ashfield@windriver.com>
---


Bruce Ashfield (2):
  linux-yocto: allow multiple BSPs per branch
  linux-yocto: update SRCREVs for emenlow

 meta/classes/kernel-yocto.bbclass                  |    4 ++--
 .../conf/distro/include/poky-default-revisions.inc |    6 +++---
 .../kern-tools/kern-tools-native_git.bb            |    2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

Re: [PATCH 0/2] linux-yocto: consolidated pull request

[Saul Wold]

On 01/24/2011 01:46 PM, Bruce Ashfield wrote:
> Saul/Richard,
>
> I'm batching two changes that I've been testing together.
>
> The first is explained by the patch itself, but basically it
> allows us to map multiple BSPs onto a single branch for building.
> There's no impact to existing BSPs, but as we go forward it means
> that if boards only differ by configuration we can avoid branch
> explosion in the kernel repo and pickup their different
> configurations. If at any point we need to break them out from
> using a common branch, that is an easy switch to do. I've been
> testing this with a test enablement of the atom-pc using the
> yocto/standar/base branch .. and it works nicely.
>
> The second is an update to pickup Tom's patches for the emenlow.
> Tom will follow up with changes to have the emenlow use the
> 2.6.37 kernel as well as the 2.6.34 kernel.
>
> These are based on top of the beagleboard commits I sent on
> Friday, which I've heard are working their way through the
> queue.
>
> Pull URL: git://git.pokylinux.org/poky-contrib.git
>    Branch: zedd/kernel
>    Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/kernel
>
> Thanks,
>      Bruce Ashfield<bruce.ashfield@windriver.com>
> ---
>
>
> Bruce Ashfield (2):
>    linux-yocto: allow multiple BSPs per branch
>    linux-yocto: update SRCREVs for emenlow
>
>   meta/classes/kernel-yocto.bbclass                  |    4 ++--
>   .../conf/distro/include/poky-default-revisions.inc |    6 +++---
>   .../kern-tools/kern-tools-native_git.bb            |    2 +-
>   3 files changed, 6 insertions(+), 6 deletions(-)
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
>
Oops, both where pulled

Sau!

[PATCH 0/2] linux-yocto: consolidated pull request

[Bruce Ashfield]

Richard/Saul,

I'm addressing a couple of bugs in this pull request.

Bug #685: for the mpc8315e-rdb boot issue. I'm going to revisit
this one, since changing the entry point shouldn't be making a
difference to this board's boot (by me looking at th code), but
it does seem to fix the problem according to the reporter.

Bug #692: kernel configuration audit information

After configuration of the kernel and audit is performed, and
has been for some time. This updates it to work with the 2.6.37
kernel and makes the output visible. You now get something like
this:

------------------------
NOTE: package linux-yocto-2.6.37+git0+e8b8c1ae44932835f4f79e77180d3ce5e4b1ec99_0+a9d833fda90e2f1257888a97e092135610b5f259-r15: task do_kernel_configcheck: Started
NOTE: validating kernel configuration
The following Kconfig files no longer exist in this tree:
      drivers/ieee1394/Kconfig
      drivers/media/video/zc0301/Kconfig

This BSP sets 1 invalid/obsolete kernel options.
These config options are not offered anywhere within this kernel.
The full list can be found in your workspace at:
/home/bruce/poky/build/tmp/work/qemux86-poky-linux/linux-yocto-2.6.37+git0+e8b8c1ae44932835f4f79e77180d3ce5e4b1ec99_0+a9d833fda90e2f1257888a97e092135610b5f259-r15/linux/meta/cfg/yocto/standard/common-pc/invalid.cfg

This BSP sets 6 kernel options that are possibly non-hardware related.
The full list can be found in your workspace at:
/home/bruce/poky/build/tmp/work/qemux86-poky-linux/linux-yocto-2.6.37+git0+e8b8c1ae44932835f4f79e77180d3ce5e4b1ec99_0+a9d833fda90e2f1257888a97e092135610b5f259-r15/linux/meta/cfg/yocto/standard/common-pc/specified_non_hdw.cfg

WARNING: There were 2 hardware options requested that do not
         have a corresponding value present in the final ".config" file.
         This probably means you aren't getting the config you wanted.
The full list can be found in your workspace at:
/home/bruce/poky/build/tmp/work/qemux86-poky-linux/linux-yocto-2.6.37+git0+e8b8c1ae44932835f4f79e77180d3ce5e4b1ec99_0+a9d833fda90e2f1257888a97e092135610b5f259-r15/linux/meta/cfg/yocto/standard/common-pc/mismatch.cfg

Waiting a second to make sure you get a chance to see this...
NOTE: package linux-yocto-2.6.37+git0+e8b8c1ae44932835f4f79e77180d3ce5e4b1ec99_0+a9d833fda90e2f1257888a97e092135610b5f259-r15: task do_kernel_configcheck: Succeeded
------------------------

This is actually telling us something useful, and actually is showing
me something that need to be fixed in the Kconfig classification for
2.6.37 .. so it has already proven to be useful data to expose
to the user!


Pull URL: git://git.pokylinux.org/poky-contrib.git
  Branch: zedd/kernel
  Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/kernel

Thanks,
    Bruce Ashfield <bruce.ashfield@windriver.com>
---


Bruce Ashfield (2):
  mpc8315e-rdb: set UBOOT_ENTRYPOINT
  linux-yocto: export kernel configuration audit to the console

 meta/classes/kernel-yocto.bbclass                  |   17 +++++++++++------
 .../conf/distro/include/poky-default-revisions.inc |    4 ++--
 meta/conf/machine/mpc8315e-rdb.conf                |    3 +++
 meta/recipes-kernel/linux/linux-yocto.inc          |    1 -
 meta/recipes-kernel/linux/linux-yocto_git.bb       |    1 +
 5 files changed, 17 insertions(+), 9 deletions(-)

-- 
1.7.3.4

[PATCH 0/2] linux-yocto: consolidated pull request

[Bruce Ashfield]

Hi all,

It's a rather small 'consolidated' pull request, but there are some other
fixes I'm working on that I just couldn't get done in time for this 
request .. so I'm not going to sit on these two any longer.

The changes to 4.1 are patches we've received to fix the build of some
filsystems (yaffs2, aufs) for the updated kernel, as well as some bluetooth
and driver support changes.

Note: the kern-tools update is required for the linux-4.1 update to work

The changes to the tools address YOCTO #7282, as well as speeding up
the overall patch process. The change is simple, the tools no longer
audit the series to ensure that you are building every patch that is
referenced in the series. They now only consider patches that are 
in addition to the changes that are part of the tree's meta data ..
i.e. patches that are in the SRC_URI.  That removes significant looping
and validation, as well unexpected resume points and 'skipped' patches.

Cheers,

Bruce

The following changes since commit 5b4e380b9b4335f4607d78d97345bbbda4c66e0e:

  bitbake: data_smart: Ensure OVERRIDES dependencies account for contains() (2015-09-18 15:14:04 +0100)

are available in the git repository at:

  git://git.pokylinux.org/poky-contrib zedd/kernel
  http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/kernel

Bruce Ashfield (2):
  linux-yocto/4.1: aufs, yaffs2 and driver fixes
  kern-tools: optimize patching peformance

 .../recipes-kernel/kern-tools/kern-tools-native_git.bb |  2 +-
 meta/recipes-kernel/linux/linux-yocto-rt_4.1.bb        |  4 ++--
 meta/recipes-kernel/linux/linux-yocto-tiny_4.1.bb      |  4 ++--
 meta/recipes-kernel/linux/linux-yocto_4.1.bb           | 18 +++++++++---------
 4 files changed, 14 insertions(+), 14 deletions(-)

-- 
2.1.0

[PATCH 1/2] linux-yocto/4.1: aufs, yaffs2 and driver fixes

[Bruce Ashfield]

Updating the 4.1 SRCREVs to integrate the following changes:

  f830ab33799d aufs: call mutex.owner only when DEBUG_MUTEXES or MUTEX_SPIN_ON_OWNER is defined
  87df2e93ed65 Bluetooth: Delay check for conn->smp in smp_conn_security()
  b09c3eab3e50 cc2520: set the default fifo pin value from platform data
  62b01c325d42 fs/yaffs2: Fix a judgement logic for ACL operations
  1d19c4e95cfc yaffs2: remove read and write methods
  2c822dbc43b9 yaffs2: replace f_dentry to f_path.dentry

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
---
 meta/recipes-kernel/linux/linux-yocto-rt_4.1.bb   |  4 ++--
 meta/recipes-kernel/linux/linux-yocto-tiny_4.1.bb |  4 ++--
 meta/recipes-kernel/linux/linux-yocto_4.1.bb      | 18 +++++++++---------
 3 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/meta/recipes-kernel/linux/linux-yocto-rt_4.1.bb b/meta/recipes-kernel/linux/linux-yocto-rt_4.1.bb
index 06483c3ee8b9..7265cde3fa83 100644
--- a/meta/recipes-kernel/linux/linux-yocto-rt_4.1.bb
+++ b/meta/recipes-kernel/linux/linux-yocto-rt_4.1.bb
@@ -2,8 +2,8 @@ KBRANCH ?= "standard/preempt-rt"
 
 require recipes-kernel/linux/linux-yocto.inc
 
-SRCREV_machine ?= "59b8c4f5e8ddb9c33c62fff22204fe2b0d8c703e"
-SRCREV_meta ?= "429f9e2ff0649b8c9341345622545d874d5e303a"
+SRCREV_machine ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_meta ?= "ef417dc3dbac098e2273b9157bf7ea8b1ade0ec5"
 
 SRC_URI = "git://git.yoctoproject.org/linux-yocto-4.1.git;branch=${KBRANCH};name=machine \
            git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-4.1;destsuffix=${KMETA}"
diff --git a/meta/recipes-kernel/linux/linux-yocto-tiny_4.1.bb b/meta/recipes-kernel/linux/linux-yocto-tiny_4.1.bb
index 061205e92088..b0619702f7a1 100644
--- a/meta/recipes-kernel/linux/linux-yocto-tiny_4.1.bb
+++ b/meta/recipes-kernel/linux/linux-yocto-tiny_4.1.bb
@@ -9,8 +9,8 @@ LINUX_VERSION ?= "4.1.6"
 KMETA = "kernel-meta"
 KCONF_BSP_AUDIT_LEVEL = "2"
 
-SRCREV_machine ?= "59b8c4f5e8ddb9c33c62fff22204fe2b0d8c703e"
-SRCREV_meta ?= "429f9e2ff0649b8c9341345622545d874d5e303a"
+SRCREV_machine ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_meta ?= "ef417dc3dbac098e2273b9157bf7ea8b1ade0ec5"
 
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
diff --git a/meta/recipes-kernel/linux/linux-yocto_4.1.bb b/meta/recipes-kernel/linux/linux-yocto_4.1.bb
index 46d46165b359..d974842810e9 100644
--- a/meta/recipes-kernel/linux/linux-yocto_4.1.bb
+++ b/meta/recipes-kernel/linux/linux-yocto_4.1.bb
@@ -11,15 +11,15 @@ KBRANCH_qemux86  ?= "standard/base"
 KBRANCH_qemux86-64 ?= "standard/base"
 KBRANCH_qemumips64 ?= "standard/mti-malta64"
 
-SRCREV_machine_qemuarm ?= "3c1245d162ccb55de1af42bcf3dbf690457bf9e4"
-SRCREV_machine_qemuarm64 ?= "59b8c4f5e8ddb9c33c62fff22204fe2b0d8c703e"
-SRCREV_machine_qemumips ?= "4132a691d0908d10b8f07ce7ece02e6dc94e17bc"
-SRCREV_machine_qemuppc ?= "59b8c4f5e8ddb9c33c62fff22204fe2b0d8c703e"
-SRCREV_machine_qemux86 ?= "59b8c4f5e8ddb9c33c62fff22204fe2b0d8c703e"
-SRCREV_machine_qemux86-64 ?= "59b8c4f5e8ddb9c33c62fff22204fe2b0d8c703e"
-SRCREV_machine_qemumips64 ?= "033e1aa633465449edf544eb81adda0caf16ec60"
-SRCREV_machine ?= "59b8c4f5e8ddb9c33c62fff22204fe2b0d8c703e"
-SRCREV_meta ?= "429f9e2ff0649b8c9341345622545d874d5e303a"
+SRCREV_machine_qemuarm ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_machine_qemuarm64 ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_machine_qemumips ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_machine_qemuppc ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_machine_qemux86 ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_machine_qemux86-64 ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_machine_qemumips64 ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_machine ?= "f830ab33799d6e0b5433c18c5c6c3c68dce17815"
+SRCREV_meta ?= "ef417dc3dbac098e2273b9157bf7ea8b1ade0ec5"
 
 SRC_URI = "git://git.yoctoproject.org/linux-yocto-4.1.git;name=machine;branch=${KBRANCH}; \
            git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-4.1;destsuffix=${KMETA}"
-- 
2.1.0

[PATCH 2/2] kern-tools: optimize patching peformance

[Bruce Ashfield]

Updating the kern-tools SRCREV to integrat the following commit:

    patching: only validate user supplied patches by default

    Previously the patching tools would consider both system and user
    supplied patches in the same manner .. they are simply a series of
    patches to be applied to a branch, and that the scripts should determine
    where in the series to start (based on what is already on the
    branch).

    This detection was causing a few problems:

      - time consuming
      - starting in the middle of a series when intermediate patches
        were merged to a branch.

    To solve both the performance and start detection, we instead simply
    note the transition from system (i.e. already defined features and
    series) and user/recipe supplied patches. When the transition is noted,
    the system will start pushing ALL patches without doing autoresume
    detection.

    Control in keeping the series up to date is passed to the user, and
    consistent behaviour/performance is achieved.

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
---
 meta/recipes-kernel/kern-tools/kern-tools-native_git.bb | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb b/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb
index 4753094aa40c..27df02ab7a44 100644
--- a/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb
+++ b/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb
@@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "file://git/tools/kgit;beginline=5;endline=9;md5=d8d1d729a70c
 
 DEPENDS = "git-native"
 
-SRCREV = "bd144d43ca5b1eaf9e727bced4ce3b61b642297c"
+SRCREV = "b7642a7c3f685850ffbb961313e6a593adb05370"
 PR = "r12"
 PV = "0.2+git${SRCPV}"
 
-- 
2.1.0

[PATCH 0/2]: linux-yocto: consolidated pull request

[Bruce Ashfield]

Hi all,

Now that we've introduced the 4.4 versioned kernel, and updated the libc-headers
to match, here's the next round of updates.

Obviously the SRCREV updates are -stable and CVE fixes, and I've tested them
on qemu*. These are good for master, and the 4.1 change is suitable for any
stable branches that have the 4.1 kernel.

On the topic of the KEYS CVEs, I also pushed changes to linux-yocto 3.14
and 3.19, but haven't prepared a SRCREV update, since I don't have the
cycles to build and boot those branches. If we do want to update older
releases with those SRCREVs, we'll have to work out a special case.

Cheers,

Bruce

The following changes since commit 3d2c0f5902cacf9d8544bf263b51ef0dd1a7218c:

  cmake: update to 3.4.2 (2016-01-26 22:49:40 +0000)

are available in the git repository at:

  git://git.pokylinux.org/poky-contrib zedd/kernel
  http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/kernel

Bruce Ashfield (2):
  linux-yocto/4.1: update to 4.1.16
  linux-yocto/4.4: CVEs and preempt-rt update

 meta/recipes-kernel/linux/linux-yocto-rt_4.1.bb   |  6 +++---
 meta/recipes-kernel/linux/linux-yocto-rt_4.4.bb   |  4 ++--
 meta/recipes-kernel/linux/linux-yocto-tiny_4.1.bb |  6 +++---
 meta/recipes-kernel/linux/linux-yocto-tiny_4.4.bb |  4 ++--
 meta/recipes-kernel/linux/linux-yocto_4.1.bb      | 20 ++++++++++----------
 meta/recipes-kernel/linux/linux-yocto_4.4.bb      | 18 +++++++++---------
 6 files changed, 29 insertions(+), 29 deletions(-)

-- 
2.1.0