[RESEND PATCH 0/3] Add MEMREMAP_WC to fix dma_init_coherent_memory

[RESEND PATCH 0/3] Add MEMREMAP_WC to fix dma_init_coherent_memory

[Brian Starkey]

Hi,

This may well have been buried with the holidays. It still applies
fine on next-20160105, but I notice patch 2 will trivially conflict
with [2] on some context lines.

As discussed here[1], these patches implement a MEMREMAP_WC flag for
memremap(), which can be used to obtain writecombine mappings. This
is then used for setting up dma_coherent_mem regions which use the
DMA_MEMORY_MAP flag.

Patch 3 makes sure that the appropriate memset function is used
when zeroing coherent allocations, which fixes an alignment fault on
arm64.

Best Regards,
Brian

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/390857.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-January/397163.html

Brian Starkey (3):
  memremap: add MEMREMAP_WC flag
  drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP
  drivers: dma-coherent: use memset_io for DMA_MEMORY_IO

 drivers/base/dma-coherent.c |   25 ++++++++++++++++++++-----
 include/linux/io.h          |    1 +
 kernel/memremap.c           |   15 +++++++++++++--
 3 files changed, 34 insertions(+), 7 deletions(-)

-- 
1.7.9.5

[RESEND PATCH 0/3] Add MEMREMAP_WC to fix dma_init_coherent_memory

[Brian Starkey]

Hi,

This may well have been buried with the holidays. It still applies
fine on next-20160105, but I notice patch 2 will trivially conflict
with [2] on some context lines.

As discussed here[1], these patches implement a MEMREMAP_WC flag for
memremap(), which can be used to obtain writecombine mappings. This
is then used for setting up dma_coherent_mem regions which use the
DMA_MEMORY_MAP flag.

Patch 3 makes sure that the appropriate memset function is used
when zeroing coherent allocations, which fixes an alignment fault on
arm64.

Best Regards,
Brian

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/390857.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-January/397163.html

Brian Starkey (3):
  memremap: add MEMREMAP_WC flag
  drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP
  drivers: dma-coherent: use memset_io for DMA_MEMORY_IO

 drivers/base/dma-coherent.c |   25 ++++++++++++++++++++-----
 include/linux/io.h          |    1 +
 kernel/memremap.c           |   15 +++++++++++++--
 3 files changed, 34 insertions(+), 7 deletions(-)

-- 
1.7.9.5

[RESEND PATCH 1/3] memremap: add MEMREMAP_WC flag

[Brian Starkey]

Add a flag to memremap() for writecombine mappings. Mappings satisfied
by this flag will not be cached, however writes may be delayed or
combined into more efficient bursts. This is most suitable for
buffers written sequentially by the CPU for use by other DMA devices.

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 include/linux/io.h |    1 +
 kernel/memremap.c  |   15 +++++++++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/include/linux/io.h b/include/linux/io.h
index 32403b5..e2c8419 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -135,6 +135,7 @@ enum {
 	/* See memremap() kernel-doc for usage description... */
 	MEMREMAP_WB = 1 << 0,
 	MEMREMAP_WT = 1 << 1,
+	MEMREMAP_WC = 1 << 2,
 };
 
 void *memremap(resource_size_t offset, size_t size, unsigned long flags);
diff --git a/kernel/memremap.c b/kernel/memremap.c
index e517a16..3849987 100644
--- a/kernel/memremap.c
+++ b/kernel/memremap.c
@@ -41,11 +41,13 @@ static void *try_ram_remap(resource_size_t offset, size_t size)
  * memremap() - remap an iomem_resource as cacheable memory
  * @offset: iomem resource start address
  * @size: size of remap
- * @flags: either MEMREMAP_WB or MEMREMAP_WT
+ * @flags: any of MEMREMAP_WB, MEMREMAP_WT and MEMREMAP_WC
  *
  * memremap() is "ioremap" for cases where it is known that the resource
  * being mapped does not have i/o side effects and the __iomem
- * annotation is not applicable.
+ * annotation is not applicable. In the case of multiple flags, the different
+ * mapping types will be attempted in the order listed below until one of
+ * them succeeds.
  *
  * MEMREMAP_WB - matches the default mapping for "System RAM" on
  * the architecture.  This is usually a read-allocate write-back cache.
@@ -57,6 +59,10 @@ static void *try_ram_remap(resource_size_t offset, size_t size)
  * cache or are written through to memory and never exist in a
  * cache-dirty state with respect to program visibility.  Attempts to
  * map "System RAM" with this mapping type will fail.
+ *
+ * MEMREMAP_WC - establish a writecombine mapping, whereby writes may
+ * be coalesced together (e.g. in the CPU's write buffers), but is otherwise
+ * uncached. Attempts to map "System RAM" with this mapping type will fail.
  */
 void *memremap(resource_size_t offset, size_t size, unsigned long flags)
 {
@@ -101,6 +107,11 @@ void *memremap(resource_size_t offset, size_t size, unsigned long flags)
 		addr = ioremap_wt(offset, size);
 	}
 
+	if (!addr && (flags & MEMREMAP_WC)) {
+		flags &= ~MEMREMAP_WC;
+		addr = ioremap_wc(offset, size);
+	}
+
 	return addr;
 }
 EXPORT_SYMBOL(memremap);
-- 
1.7.9.5

[RESEND PATCH 1/3] memremap: add MEMREMAP_WC flag

[Brian Starkey]

Add a flag to memremap() for writecombine mappings. Mappings satisfied
by this flag will not be cached, however writes may be delayed or
combined into more efficient bursts. This is most suitable for
buffers written sequentially by the CPU for use by other DMA devices.

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 include/linux/io.h |    1 +
 kernel/memremap.c  |   15 +++++++++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/include/linux/io.h b/include/linux/io.h
index 32403b5..e2c8419 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -135,6 +135,7 @@ enum {
 	/* See memremap() kernel-doc for usage description... */
 	MEMREMAP_WB = 1 << 0,
 	MEMREMAP_WT = 1 << 1,
+	MEMREMAP_WC = 1 << 2,
 };
 
 void *memremap(resource_size_t offset, size_t size, unsigned long flags);
diff --git a/kernel/memremap.c b/kernel/memremap.c
index e517a16..3849987 100644
--- a/kernel/memremap.c
+++ b/kernel/memremap.c
@@ -41,11 +41,13 @@ static void *try_ram_remap(resource_size_t offset, size_t size)
  * memremap() - remap an iomem_resource as cacheable memory
  * @offset: iomem resource start address
  * @size: size of remap
- * @flags: either MEMREMAP_WB or MEMREMAP_WT
+ * @flags: any of MEMREMAP_WB, MEMREMAP_WT and MEMREMAP_WC
  *
  * memremap() is "ioremap" for cases where it is known that the resource
  * being mapped does not have i/o side effects and the __iomem
- * annotation is not applicable.
+ * annotation is not applicable. In the case of multiple flags, the different
+ * mapping types will be attempted in the order listed below until one of
+ * them succeeds.
  *
  * MEMREMAP_WB - matches the default mapping for "System RAM" on
  * the architecture.  This is usually a read-allocate write-back cache.
@@ -57,6 +59,10 @@ static void *try_ram_remap(resource_size_t offset, size_t size)
  * cache or are written through to memory and never exist in a
  * cache-dirty state with respect to program visibility.  Attempts to
  * map "System RAM" with this mapping type will fail.
+ *
+ * MEMREMAP_WC - establish a writecombine mapping, whereby writes may
+ * be coalesced together (e.g. in the CPU's write buffers), but is otherwise
+ * uncached. Attempts to map "System RAM" with this mapping type will fail.
  */
 void *memremap(resource_size_t offset, size_t size, unsigned long flags)
 {
@@ -101,6 +107,11 @@ void *memremap(resource_size_t offset, size_t size, unsigned long flags)
 		addr = ioremap_wt(offset, size);
 	}
 
+	if (!addr && (flags & MEMREMAP_WC)) {
+		flags &= ~MEMREMAP_WC;
+		addr = ioremap_wc(offset, size);
+	}
+
 	return addr;
 }
 EXPORT_SYMBOL(memremap);
-- 
1.7.9.5

[RESEND PATCH 2/3] drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP

[Brian Starkey]

When the DMA_MEMORY_MAP flag is used, memory which can be accessed
directly should be returned, so use memremap(..., MEMREMAP_WC) to
provide a writecombine mapping.

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 drivers/base/dma-coherent.c |   20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index 55b8398..f98359a 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -2,6 +2,7 @@
  * Coherent per-device memory handling.
  * Borrowed from i386
  */
+#include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -31,7 +32,10 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, dma_addr_t device_add
 	if (!size)
 		goto out;
 
-	mem_base = ioremap(phys_addr, size);
+	if (flags & DMA_MEMORY_MAP)
+		mem_base = memremap(phys_addr, size, MEMREMAP_WC);
+	else
+		mem_base = ioremap(phys_addr, size);
 	if (!mem_base)
 		goto out;
 
@@ -58,8 +62,12 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, dma_addr_t device_add
 
 out:
 	kfree(dma_mem);
-	if (mem_base)
-		iounmap(mem_base);
+	if (mem_base) {
+		if (flags & DMA_MEMORY_MAP)
+			memunmap(mem_base);
+		else
+			iounmap(mem_base);
+	}
 	return 0;
 }
 
@@ -67,7 +75,11 @@ static void dma_release_coherent_memory(struct dma_coherent_mem *mem)
 {
 	if (!mem)
 		return;
-	iounmap(mem->virt_base);
+
+	if (mem->flags & DMA_MEMORY_MAP)
+		memunmap(mem->virt_base);
+	else
+		iounmap(mem->virt_base);
 	kfree(mem->bitmap);
 	kfree(mem);
 }
-- 
1.7.9.5

[RESEND PATCH 2/3] drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP

[Brian Starkey]

When the DMA_MEMORY_MAP flag is used, memory which can be accessed
directly should be returned, so use memremap(..., MEMREMAP_WC) to
provide a writecombine mapping.

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 drivers/base/dma-coherent.c |   20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index 55b8398..f98359a 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -2,6 +2,7 @@
  * Coherent per-device memory handling.
  * Borrowed from i386
  */
+#include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -31,7 +32,10 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, dma_addr_t device_add
 	if (!size)
 		goto out;
 
-	mem_base = ioremap(phys_addr, size);
+	if (flags & DMA_MEMORY_MAP)
+		mem_base = memremap(phys_addr, size, MEMREMAP_WC);
+	else
+		mem_base = ioremap(phys_addr, size);
 	if (!mem_base)
 		goto out;
 
@@ -58,8 +62,12 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, dma_addr_t device_add
 
 out:
 	kfree(dma_mem);
-	if (mem_base)
-		iounmap(mem_base);
+	if (mem_base) {
+		if (flags & DMA_MEMORY_MAP)
+			memunmap(mem_base);
+		else
+			iounmap(mem_base);
+	}
 	return 0;
 }
 
@@ -67,7 +75,11 @@ static void dma_release_coherent_memory(struct dma_coherent_mem *mem)
 {
 	if (!mem)
 		return;
-	iounmap(mem->virt_base);
+
+	if (mem->flags & DMA_MEMORY_MAP)
+		memunmap(mem->virt_base);
+	else
+		iounmap(mem->virt_base);
 	kfree(mem->bitmap);
 	kfree(mem);
 }
-- 
1.7.9.5

[RESEND PATCH 2/3] drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP

[Michal Nazarewicz]

On Tue, Jan 05 2016, Brian Starkey wrote:
> When the DMA_MEMORY_MAP flag is used, memory which can be accessed
> directly should be returned, so use memremap(..., MEMREMAP_WC) to
> provide a writecombine mapping.
>
> Signed-off-by: Brian Starkey <brian.starkey@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>

Acked-by: Michal Nazarewicz <mina86@mina86.com>

> ---
>  drivers/base/dma-coherent.c |   20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
> index 55b8398..f98359a 100644
> --- a/drivers/base/dma-coherent.c
> +++ b/drivers/base/dma-coherent.c
> @@ -2,6 +2,7 @@
>   * Coherent per-device memory handling.
>   * Borrowed from i386
>   */
> +#include <linux/io.h>
>  #include <linux/slab.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> @@ -31,7 +32,10 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, dma_addr_t device_add
>  	if (!size)
>  		goto out;
>  
> -	mem_base = ioremap(phys_addr, size);
> +	if (flags & DMA_MEMORY_MAP)
> +		mem_base = memremap(phys_addr, size, MEMREMAP_WC);
> +	else
> +		mem_base = ioremap(phys_addr, size);
>  	if (!mem_base)
>  		goto out;
>  
> @@ -58,8 +62,12 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, dma_addr_t device_add
>  
>  out:
>  	kfree(dma_mem);
> -	if (mem_base)
> -		iounmap(mem_base);
> +	if (mem_base) {
> +		if (flags & DMA_MEMORY_MAP)
> +			memunmap(mem_base);
> +		else
> +			iounmap(mem_base);
> +	}
>  	return 0;
>  }
>  
> @@ -67,7 +75,11 @@ static void dma_release_coherent_memory(struct dma_coherent_mem *mem)
>  {
>  	if (!mem)
>  		return;
> -	iounmap(mem->virt_base);
> +
> +	if (mem->flags & DMA_MEMORY_MAP)
> +		memunmap(mem->virt_base);
> +	else
> +		iounmap(mem->virt_base);
>  	kfree(mem->bitmap);
>  	kfree(mem);
>  }
> -- 
> 1.7.9.5
>

-- 
Best regards,                                         _     _
.o. | Liege of Serenely Enlightened Majesty of      o' \,=./ `o
..o | Computer Science,  ??? ?mina86? ??????  (o o)
ooo +--<mpn@google.com>--<xmpp:mina86@jabber.org>--ooO--(_)--Ooo--

Re: [RESEND PATCH 2/3] drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP

[Michal Nazarewicz]

On Tue, Jan 05 2016, Brian Starkey wrote:
> When the DMA_MEMORY_MAP flag is used, memory which can be accessed
> directly should be returned, so use memremap(..., MEMREMAP_WC) to
> provide a writecombine mapping.
>
> Signed-off-by: Brian Starkey <brian.starkey@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>

Acked-by: Michal Nazarewicz <mina86@mina86.com>

> ---
>  drivers/base/dma-coherent.c |   20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
> index 55b8398..f98359a 100644
> --- a/drivers/base/dma-coherent.c
> +++ b/drivers/base/dma-coherent.c
> @@ -2,6 +2,7 @@
>   * Coherent per-device memory handling.
>   * Borrowed from i386
>   */
> +#include <linux/io.h>
>  #include <linux/slab.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> @@ -31,7 +32,10 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, dma_addr_t device_add
>  	if (!size)
>  		goto out;
>  
> -	mem_base = ioremap(phys_addr, size);
> +	if (flags & DMA_MEMORY_MAP)
> +		mem_base = memremap(phys_addr, size, MEMREMAP_WC);
> +	else
> +		mem_base = ioremap(phys_addr, size);
>  	if (!mem_base)
>  		goto out;
>  
> @@ -58,8 +62,12 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, dma_addr_t device_add
>  
>  out:
>  	kfree(dma_mem);
> -	if (mem_base)
> -		iounmap(mem_base);
> +	if (mem_base) {
> +		if (flags & DMA_MEMORY_MAP)
> +			memunmap(mem_base);
> +		else
> +			iounmap(mem_base);
> +	}
>  	return 0;
>  }
>  
> @@ -67,7 +75,11 @@ static void dma_release_coherent_memory(struct dma_coherent_mem *mem)
>  {
>  	if (!mem)
>  		return;
> -	iounmap(mem->virt_base);
> +
> +	if (mem->flags & DMA_MEMORY_MAP)
> +		memunmap(mem->virt_base);
> +	else
> +		iounmap(mem->virt_base);
>  	kfree(mem->bitmap);
>  	kfree(mem);
>  }
> -- 
> 1.7.9.5
>

-- 
Best regards,                                         _     _
.o. | Liege of Serenely Enlightened Majesty of      o' \,=./ `o
..o | Computer Science,  ミハウ “mina86” ナザレヴイツ  (o o)
ooo +--<mpn@google.com>--<xmpp:mina86@jabber.org>--ooO--(_)--Ooo--

[RESEND PATCH 3/3] drivers: dma-coherent: use memset_io for DMA_MEMORY_IO mappings

[Brian Starkey]

Use memset_io() for DMA_MEMORY_IO mappings which are mapped as I/O
memory, and regular memset() for DMA_MEMORY_MAP mappings.

This fixes the below alignment fault on arm64 for DMA_MEMORY_IO
mappings, where memset() uses the DC ZVA instruction which is
invalid on device memory.

   Unhandled fault: alignment fault (0x96000061) at 0xffffff8000380000
   Internal error: : 96000061 [#1] PREEMPT SMP
   Modules linked in: hdlcd(+) clk_scpi
   CPU: 4 PID: 1355 Comm: systemd-udevd Not tainted 4.4.0-rc1+ #5
   Hardware name: ARM Juno development board (r0) (DT)
   task: ffffffc9763eee00 ti: ffffffc9758c4000 task.ti: ffffffc9758c4000
   PC is at __efistub_memset+0x1ac/0x200
   LR is at dma_alloc_from_coherent+0xb0/0x120
   pc : [<ffffffc00030ff2c>] lr : [<ffffffc00042a918>] pstate: 400001c5
   sp : ffffffc9758c79a0
   x29: ffffffc9758c79a0 x28: ffffffc000635cd0
   x27: 0000000000000124 x26: ffffffc000119ef4
   x25: 0000000000010000 x24: 0000000000000140
   x23: ffffffc07e9ac3a8 x22: ffffffc9758c7a58
   x21: ffffffc9758c7a68 x20: 0000000000000004
   x19: ffffffc07e9ac380 x18: 0000000000000001
   x17: 0000007fae1bbba8 x16: ffffffc0001b2d1c
   x15: ffffffffffffffff x14: 0ffffffffffffffe
   x13: 0000000000000010 x12: ffffff800837ffff
   x11: ffffff800837ffff x10: 0000000040000000
   x9 : 0000000000000000 x8 : ffffff8000380000
   x7 : 0000000000000000 x6 : 000000000000003f
   x5 : 0000000000000040 x4 : 0000000000000000
   x3 : 0000000000000004 x2 : 000000000000ffc0
   x1 : 0000000000000000 x0 : ffffff8000380000

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 drivers/base/dma-coherent.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index f98359a..4e4ad30 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -193,7 +193,10 @@ int dma_alloc_from_coherent(struct device *dev, ssize_t size,
 	 */
 	*dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
 	*ret = mem->virt_base + (pageno << PAGE_SHIFT);
-	memset(*ret, 0, size);
+	if (mem->flags & DMA_MEMORY_MAP)
+		memset(*ret, 0, size);
+	else
+		memset_io(*ret, 0, size);
 	spin_unlock_irqrestore(&mem->spinlock, flags);
 
 	return 1;
-- 
1.7.9.5

[RESEND PATCH 3/3] drivers: dma-coherent: use memset_io for DMA_MEMORY_IO mappings

[Brian Starkey]

Use memset_io() for DMA_MEMORY_IO mappings which are mapped as I/O
memory, and regular memset() for DMA_MEMORY_MAP mappings.

This fixes the below alignment fault on arm64 for DMA_MEMORY_IO
mappings, where memset() uses the DC ZVA instruction which is
invalid on device memory.

   Unhandled fault: alignment fault (0x96000061) at 0xffffff8000380000
   Internal error: : 96000061 [#1] PREEMPT SMP
   Modules linked in: hdlcd(+) clk_scpi
   CPU: 4 PID: 1355 Comm: systemd-udevd Not tainted 4.4.0-rc1+ #5
   Hardware name: ARM Juno development board (r0) (DT)
   task: ffffffc9763eee00 ti: ffffffc9758c4000 task.ti: ffffffc9758c4000
   PC is at __efistub_memset+0x1ac/0x200
   LR is at dma_alloc_from_coherent+0xb0/0x120
   pc : [<ffffffc00030ff2c>] lr : [<ffffffc00042a918>] pstate: 400001c5
   sp : ffffffc9758c79a0
   x29: ffffffc9758c79a0 x28: ffffffc000635cd0
   x27: 0000000000000124 x26: ffffffc000119ef4
   x25: 0000000000010000 x24: 0000000000000140
   x23: ffffffc07e9ac3a8 x22: ffffffc9758c7a58
   x21: ffffffc9758c7a68 x20: 0000000000000004
   x19: ffffffc07e9ac380 x18: 0000000000000001
   x17: 0000007fae1bbba8 x16: ffffffc0001b2d1c
   x15: ffffffffffffffff x14: 0ffffffffffffffe
   x13: 0000000000000010 x12: ffffff800837ffff
   x11: ffffff800837ffff x10: 0000000040000000
   x9 : 0000000000000000 x8 : ffffff8000380000
   x7 : 0000000000000000 x6 : 000000000000003f
   x5 : 0000000000000040 x4 : 0000000000000000
   x3 : 0000000000000004 x2 : 000000000000ffc0
   x1 : 0000000000000000 x0 : ffffff8000380000

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 drivers/base/dma-coherent.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index f98359a..4e4ad30 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -193,7 +193,10 @@ int dma_alloc_from_coherent(struct device *dev, ssize_t size,
 	 */
 	*dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
 	*ret = mem->virt_base + (pageno << PAGE_SHIFT);
-	memset(*ret, 0, size);
+	if (mem->flags & DMA_MEMORY_MAP)
+		memset(*ret, 0, size);
+	else
+		memset_io(*ret, 0, size);
 	spin_unlock_irqrestore(&mem->spinlock, flags);
 
 	return 1;
-- 
1.7.9.5

[RESEND PATCH 0/3] Add MEMREMAP_WC to fix dma_init_coherent_memory

[Brian Starkey]

Hi,

Are there any comments on these? Without them dma-coherent can't be used
on arm64 so it would be good to get them merged if there are no
objections.

I can resend with Michal's ack for patch 2 if needed.

Thanks,
Brian

On Tue, Jan 05, 2016 at 04:41:25PM +0000, Brian Starkey wrote:
>Hi,
>
>This may well have been buried with the holidays. It still applies
>fine on next-20160105, but I notice patch 2 will trivially conflict
>with [2] on some context lines.
>
>As discussed here[1], these patches implement a MEMREMAP_WC flag for
>memremap(), which can be used to obtain writecombine mappings. This
>is then used for setting up dma_coherent_mem regions which use the
>DMA_MEMORY_MAP flag.
>
>Patch 3 makes sure that the appropriate memset function is used
>when zeroing coherent allocations, which fixes an alignment fault on
>arm64.
>
>Best Regards,
>Brian
>
>[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/390857.html
>[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-January/397163.html
>
>Brian Starkey (3):
>  memremap: add MEMREMAP_WC flag
>  drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP
>  drivers: dma-coherent: use memset_io for DMA_MEMORY_IO
>
> drivers/base/dma-coherent.c |   25 ++++++++++++++++++++-----
> include/linux/io.h          |    1 +
> kernel/memremap.c           |   15 +++++++++++++--
> 3 files changed, 34 insertions(+), 7 deletions(-)
>
>-- 
>1.7.9.5
>

Re: [RESEND PATCH 0/3] Add MEMREMAP_WC to fix dma_init_coherent_memory

[Brian Starkey]

Hi,

Are there any comments on these? Without them dma-coherent can't be used
on arm64 so it would be good to get them merged if there are no
objections.

I can resend with Michal's ack for patch 2 if needed.

Thanks,
Brian

On Tue, Jan 05, 2016 at 04:41:25PM +0000, Brian Starkey wrote:
>Hi,
>
>This may well have been buried with the holidays. It still applies
>fine on next-20160105, but I notice patch 2 will trivially conflict
>with [2] on some context lines.
>
>As discussed here[1], these patches implement a MEMREMAP_WC flag for
>memremap(), which can be used to obtain writecombine mappings. This
>is then used for setting up dma_coherent_mem regions which use the
>DMA_MEMORY_MAP flag.
>
>Patch 3 makes sure that the appropriate memset function is used
>when zeroing coherent allocations, which fixes an alignment fault on
>arm64.
>
>Best Regards,
>Brian
>
>[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/390857.html
>[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-January/397163.html
>
>Brian Starkey (3):
>  memremap: add MEMREMAP_WC flag
>  drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP
>  drivers: dma-coherent: use memset_io for DMA_MEMORY_IO
>
> drivers/base/dma-coherent.c |   25 ++++++++++++++++++++-----
> include/linux/io.h          |    1 +
> kernel/memremap.c           |   15 +++++++++++++--
> 3 files changed, 34 insertions(+), 7 deletions(-)
>
>-- 
>1.7.9.5
>