From: lars.persson@axis.com (Lars Persson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/6] arm: Add Artpec-6 SoC
Date: Thu, 11 Feb 2016 17:06:15 +0100 [thread overview]
Message-ID: <cover.1455205057.git.larper@axis.com> (raw)
Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and
ethernet are wired up.
Changes since v2:
- Create a syscon binding for the system controller.
- Clock patches split out to new patch series "clk: Add Artpec-6 SoC support".
Changes since v1:
- Corrected bindings for axis,artpec6-pll1-clock.
- Moved the uart aliases to the board dts.
- Kconfig cleanup.
- Added a device tree binding for the dma configuration.
- Added CONFIG_SYNOPSYS_DWC_ETH_QOS to multi_v7_defconfig.
- Added binding documentation for axis,artpec6-dev-board.
Lars Persson (6):
arm: add device-tree SoC bindings for Axis Artpec-6
arm: dts: add Artpec-6 SoC dtsi file
arm: dts: add Artpec-6 development board dts
arm: initial machine port for artpec-6 SoC
arm: multi_v7_defconfig: add MACH_ARTPEC6
arm: mach-artpec: add entry to MAINTAINERS
Documentation/devicetree/bindings/arm/axis.txt | 29 +++
MAINTAINERS | 10 ++
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/artpec6-devboard.dts | 64 +++++++
arch/arm/boot/dts/artpec6.dtsi | 236 +++++++++++++++++++++++++
arch/arm/configs/multi_v7_defconfig | 3 +
arch/arm/mach-artpec/Kconfig | 20 +++
arch/arm/mach-artpec/Makefile | 1 +
arch/arm/mach-artpec/board-artpec6.c | 72 ++++++++
11 files changed, 440 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/axis.txt
create mode 100644 arch/arm/boot/dts/artpec6-devboard.dts
create mode 100644 arch/arm/boot/dts/artpec6.dtsi
create mode 100644 arch/arm/mach-artpec/Kconfig
create mode 100644 arch/arm/mach-artpec/Makefile
create mode 100644 arch/arm/mach-artpec/board-artpec6.c
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Lars Persson <lars.persson-VrBV9hrLPhE@public.gmane.org>
To: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Lars Persson <larper-VrBV9hrLPhE@public.gmane.org>
Subject: [PATCH v3 0/6] arm: Add Artpec-6 SoC
Date: Thu, 11 Feb 2016 17:06:15 +0100 [thread overview]
Message-ID: <cover.1455205057.git.larper@axis.com> (raw)
Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and
ethernet are wired up.
Changes since v2:
- Create a syscon binding for the system controller.
- Clock patches split out to new patch series "clk: Add Artpec-6 SoC support".
Changes since v1:
- Corrected bindings for axis,artpec6-pll1-clock.
- Moved the uart aliases to the board dts.
- Kconfig cleanup.
- Added a device tree binding for the dma configuration.
- Added CONFIG_SYNOPSYS_DWC_ETH_QOS to multi_v7_defconfig.
- Added binding documentation for axis,artpec6-dev-board.
Lars Persson (6):
arm: add device-tree SoC bindings for Axis Artpec-6
arm: dts: add Artpec-6 SoC dtsi file
arm: dts: add Artpec-6 development board dts
arm: initial machine port for artpec-6 SoC
arm: multi_v7_defconfig: add MACH_ARTPEC6
arm: mach-artpec: add entry to MAINTAINERS
Documentation/devicetree/bindings/arm/axis.txt | 29 +++
MAINTAINERS | 10 ++
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/artpec6-devboard.dts | 64 +++++++
arch/arm/boot/dts/artpec6.dtsi | 236 +++++++++++++++++++++++++
arch/arm/configs/multi_v7_defconfig | 3 +
arch/arm/mach-artpec/Kconfig | 20 +++
arch/arm/mach-artpec/Makefile | 1 +
arch/arm/mach-artpec/board-artpec6.c | 72 ++++++++
11 files changed, 440 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/axis.txt
create mode 100644 arch/arm/boot/dts/artpec6-devboard.dts
create mode 100644 arch/arm/boot/dts/artpec6.dtsi
create mode 100644 arch/arm/mach-artpec/Kconfig
create mode 100644 arch/arm/mach-artpec/Makefile
create mode 100644 arch/arm/mach-artpec/board-artpec6.c
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Lars Persson <lars.persson@axis.com>
To: arm@kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux-kernel@vger.kernel.org, Lars Persson <larper@axis.com>
Subject: [PATCH v3 0/6] arm: Add Artpec-6 SoC
Date: Thu, 11 Feb 2016 17:06:15 +0100 [thread overview]
Message-ID: <cover.1455205057.git.larper@axis.com> (raw)
Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and
ethernet are wired up.
Changes since v2:
- Create a syscon binding for the system controller.
- Clock patches split out to new patch series "clk: Add Artpec-6 SoC support".
Changes since v1:
- Corrected bindings for axis,artpec6-pll1-clock.
- Moved the uart aliases to the board dts.
- Kconfig cleanup.
- Added a device tree binding for the dma configuration.
- Added CONFIG_SYNOPSYS_DWC_ETH_QOS to multi_v7_defconfig.
- Added binding documentation for axis,artpec6-dev-board.
Lars Persson (6):
arm: add device-tree SoC bindings for Axis Artpec-6
arm: dts: add Artpec-6 SoC dtsi file
arm: dts: add Artpec-6 development board dts
arm: initial machine port for artpec-6 SoC
arm: multi_v7_defconfig: add MACH_ARTPEC6
arm: mach-artpec: add entry to MAINTAINERS
Documentation/devicetree/bindings/arm/axis.txt | 29 +++
MAINTAINERS | 10 ++
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/artpec6-devboard.dts | 64 +++++++
arch/arm/boot/dts/artpec6.dtsi | 236 +++++++++++++++++++++++++
arch/arm/configs/multi_v7_defconfig | 3 +
arch/arm/mach-artpec/Kconfig | 20 +++
arch/arm/mach-artpec/Makefile | 1 +
arch/arm/mach-artpec/board-artpec6.c | 72 ++++++++
11 files changed, 440 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/axis.txt
create mode 100644 arch/arm/boot/dts/artpec6-devboard.dts
create mode 100644 arch/arm/boot/dts/artpec6.dtsi
create mode 100644 arch/arm/mach-artpec/Kconfig
create mode 100644 arch/arm/mach-artpec/Makefile
create mode 100644 arch/arm/mach-artpec/board-artpec6.c
--
2.1.4
next reply other threads:[~2016-02-11 16:06 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-11 16:06 Lars Persson [this message]
2016-02-11 16:06 ` [PATCH v3 0/6] arm: Add Artpec-6 SoC Lars Persson
2016-02-11 16:06 ` Lars Persson
2016-02-11 16:06 ` [PATCH v3 1/6] arm: add device-tree SoC bindings for Axis Artpec-6 Lars Persson
2016-02-11 16:06 ` Lars Persson
2016-02-12 16:40 ` Rob Herring
2016-02-12 16:40 ` Rob Herring
2016-02-12 16:40 ` Rob Herring
2016-02-11 16:06 ` [PATCH v3 2/6] arm: dts: add Artpec-6 SoC dtsi file Lars Persson
2016-02-11 16:06 ` Lars Persson
2016-02-25 0:29 ` Olof Johansson
2016-02-25 0:29 ` Olof Johansson
2016-02-11 16:06 ` [PATCH v3 3/6] arm: dts: add Artpec-6 development board dts Lars Persson
2016-02-11 16:06 ` Lars Persson
2016-02-11 16:06 ` [PATCH v3 4/6] arm: initial machine port for artpec-6 SoC Lars Persson
2016-02-11 16:06 ` Lars Persson
2016-02-11 16:06 ` [PATCH v3 5/6] arm: multi_v7_defconfig: add MACH_ARTPEC6 Lars Persson
2016-02-11 16:06 ` Lars Persson
2016-02-11 16:06 ` [PATCH v3 6/6] arm: mach-artpec: add entry to MAINTAINERS Lars Persson
2016-02-11 16:06 ` Lars Persson
2016-02-11 16:20 ` [PATCH v3 0/6] arm: Add Artpec-6 SoC Arnd Bergmann
2016-02-11 16:20 ` Arnd Bergmann
2016-02-24 22:00 ` Olof Johansson
2016-02-24 22:00 ` Olof Johansson
2016-02-24 22:00 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1455205057.git.larper@axis.com \
--to=lars.persson@axis.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.