From: Lukas Wunner <lukas@wunner.de>
To: linux-efi@vger.kernel.org,
Matt Fleming <matt@codeblueprint.co.uk>,
linux-kernel@vger.kernel.org
Cc: Andreas Noever <andreas.noever@gmail.com>,
Pierre Moreau <pierre.morrow@free.fr>,
reverser@put.as, grub-devel@gnu.org, x86@kernel.org,
Aleksey Makarov <aleksey.makarov@linaro.org>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH 0/6] Apple device properties
Date: Wed, 27 Jul 2016 13:20:41 +0200 [thread overview]
Message-ID: <cover.1469616641.git.lukas@wunner.de> (raw)
Apple EFI drivers supply device properties which are needed to support
Macs optimally.
This series extends the efistub to retrieve the device properties before
ExitBootServices is called (patch [1/6]). They are assigned to devices
in an fs_initcall (patch [5/6]). As a first use case, the Thunderbolt
driver is amended to take advantage of the Device ROM supplied by EFI
(patch [6/6]).
A by-product is a parser for EFI Device Paths which finds the struct
device corresponding to a given path. This is needed to assign
properties to their devices (patch [3/6]).
I've pushed these patches to GitHub where they can be reviewed more
comfortably with green/red highlighting:
https://github.com/l1k/linux/commits/apple_properties_v1
It would be good if one of the resident EFI experts could look over
patch [1/6] to see if I've made any mistakes that might prevent this
from working on 32 bit. It was only tested on 64 bit, I don't know
anyone with an older Mac who could test this.
Specifically, is the following okay:
efi_early->call((unsigned long)sys_table->boottime->locate_protocol, ...)
It would be convenient to have LocateProtocol or LocateHandleBuffer in
struct efi_config so that they can be called with efi_call_early().
Would a patch to add those be entertained? Right now we only offer
LocateHandle and HandleProtocol, which is somewhat cumbersome and
needs more code as the setup_pci() functions show.
Thanks,
Lukas
Lukas Wunner (6):
efi: Retrieve Apple device properties
ACPI / bus: Make acpi_get_first_physical_node() public
efi: Add device path parser
driver core: Don't leak secondary fwnode on device removal
efi: Assign Apple device properties
thunderbolt: Use Device ROM retrieved from EFI
Documentation/kernel-parameters.txt | 5 +
arch/x86/boot/compressed/eboot.c | 55 ++++++++
arch/x86/include/uapi/asm/bootparam.h | 1 +
drivers/acpi/internal.h | 1 -
drivers/base/core.c | 1 +
drivers/firmware/efi/Kconfig | 16 +++
drivers/firmware/efi/Makefile | 2 +
drivers/firmware/efi/apple-properties.c | 219 ++++++++++++++++++++++++++++++++
drivers/firmware/efi/dev-path-parser.c | 186 +++++++++++++++++++++++++++
drivers/thunderbolt/Kconfig | 1 +
drivers/thunderbolt/eeprom.c | 42 ++++++
drivers/thunderbolt/switch.c | 2 +-
include/linux/acpi.h | 7 +
include/linux/efi.h | 38 ++++++
14 files changed, 574 insertions(+), 2 deletions(-)
create mode 100644 drivers/firmware/efi/apple-properties.c
create mode 100644 drivers/firmware/efi/dev-path-parser.c
--
2.8.1
WARNING: multiple messages have this Message-ID (diff)
From: Lukas Wunner <lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
To: linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Matt Fleming
<matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Andreas Noever
<andreas.noever-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Pierre Moreau <pierre.morrow-GANU6spQydw@public.gmane.org>,
reverser-P1ImLx+pFc0@public.gmane.org,
grub-devel-mXXj517/zsQ@public.gmane.org,
x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
Aleksey Makarov
<aleksey.makarov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Rafael J. Wysocki"
<rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Mika Westerberg
<mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Andy Shevchenko
<andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
Subject: [PATCH 0/6] Apple device properties
Date: Wed, 27 Jul 2016 13:20:41 +0200 [thread overview]
Message-ID: <cover.1469616641.git.lukas@wunner.de> (raw)
Apple EFI drivers supply device properties which are needed to support
Macs optimally.
This series extends the efistub to retrieve the device properties before
ExitBootServices is called (patch [1/6]). They are assigned to devices
in an fs_initcall (patch [5/6]). As a first use case, the Thunderbolt
driver is amended to take advantage of the Device ROM supplied by EFI
(patch [6/6]).
A by-product is a parser for EFI Device Paths which finds the struct
device corresponding to a given path. This is needed to assign
properties to their devices (patch [3/6]).
I've pushed these patches to GitHub where they can be reviewed more
comfortably with green/red highlighting:
https://github.com/l1k/linux/commits/apple_properties_v1
It would be good if one of the resident EFI experts could look over
patch [1/6] to see if I've made any mistakes that might prevent this
from working on 32 bit. It was only tested on 64 bit, I don't know
anyone with an older Mac who could test this.
Specifically, is the following okay:
efi_early->call((unsigned long)sys_table->boottime->locate_protocol, ...)
It would be convenient to have LocateProtocol or LocateHandleBuffer in
struct efi_config so that they can be called with efi_call_early().
Would a patch to add those be entertained? Right now we only offer
LocateHandle and HandleProtocol, which is somewhat cumbersome and
needs more code as the setup_pci() functions show.
Thanks,
Lukas
Lukas Wunner (6):
efi: Retrieve Apple device properties
ACPI / bus: Make acpi_get_first_physical_node() public
efi: Add device path parser
driver core: Don't leak secondary fwnode on device removal
efi: Assign Apple device properties
thunderbolt: Use Device ROM retrieved from EFI
Documentation/kernel-parameters.txt | 5 +
arch/x86/boot/compressed/eboot.c | 55 ++++++++
arch/x86/include/uapi/asm/bootparam.h | 1 +
drivers/acpi/internal.h | 1 -
drivers/base/core.c | 1 +
drivers/firmware/efi/Kconfig | 16 +++
drivers/firmware/efi/Makefile | 2 +
drivers/firmware/efi/apple-properties.c | 219 ++++++++++++++++++++++++++++++++
drivers/firmware/efi/dev-path-parser.c | 186 +++++++++++++++++++++++++++
drivers/thunderbolt/Kconfig | 1 +
drivers/thunderbolt/eeprom.c | 42 ++++++
drivers/thunderbolt/switch.c | 2 +-
include/linux/acpi.h | 7 +
include/linux/efi.h | 38 ++++++
14 files changed, 574 insertions(+), 2 deletions(-)
create mode 100644 drivers/firmware/efi/apple-properties.c
create mode 100644 drivers/firmware/efi/dev-path-parser.c
--
2.8.1
next reply other threads:[~2016-07-27 13:23 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-27 11:20 Lukas Wunner [this message]
2016-07-27 11:20 ` [PATCH 0/6] Apple device properties Lukas Wunner
2016-07-27 11:20 ` [PATCH 1/6] efi: Retrieve " Lukas Wunner
2016-07-27 11:20 ` Lukas Wunner
2016-07-30 19:16 ` Andrei Borzenkov
2016-07-30 19:16 ` Andrei Borzenkov
2016-08-04 15:13 ` Matt Fleming
2016-08-04 15:13 ` Matt Fleming
2016-08-05 11:42 ` Lukas Wunner
2016-08-05 11:42 ` Lukas Wunner
2016-08-05 12:06 ` Matt Fleming
2016-07-27 11:20 ` [PATCH 5/6] efi: Assign " Lukas Wunner
[not found] ` <a0edd928ab099682c2cb4c4544c599573144d03a.1469616641.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-08-04 15:52 ` Matt Fleming
2016-08-04 15:52 ` Matt Fleming
2016-07-27 11:20 ` [PATCH 6/6] thunderbolt: Use Device ROM retrieved from EFI Lukas Wunner
2016-07-27 11:20 ` [PATCH 2/6] ACPI / bus: Make acpi_get_first_physical_node() public Lukas Wunner
2016-08-17 0:38 ` Rafael J. Wysocki
[not found] ` <1821462.QyPXGhZaWJ-sKB8Sp2ER+y1GS7QM15AGw@public.gmane.org>
2016-09-12 22:03 ` Rafael J. Wysocki
2016-09-12 22:03 ` Rafael J. Wysocki
2016-07-27 11:20 ` [PATCH 3/6] efi: Add device path parser Lukas Wunner
[not found] ` <cover.1469616641.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-07-27 11:20 ` [PATCH 4/6] driver core: Don't leak secondary fwnode on device removal Lukas Wunner
2016-07-27 11:20 ` Lukas Wunner
2016-08-17 0:38 ` Rafael J. Wysocki
2016-08-30 9:03 ` Lukas Wunner
2016-09-12 22:03 ` Rafael J. Wysocki
2016-07-27 23:48 ` [PATCH 0/6] Apple device properties Rafael J. Wysocki
2016-07-27 23:48 ` Rafael J. Wysocki
2016-07-28 0:25 ` [PATCH 6/6] thunderbolt: Use Device ROM retrieved from EFI Lukas Wunner
2016-07-28 0:25 ` [PATCH 5/6] efi: Assign Apple device properties Lukas Wunner
2016-07-28 0:25 ` [PATCH 4/6] driver core: Don't leak secondary fwnode on device removal Lukas Wunner
2016-07-28 0:25 ` [PATCH 1/6] efi: Retrieve Apple device properties Lukas Wunner
2016-07-28 0:25 ` [PATCH 2/6] ACPI / bus: Make acpi_get_first_physical_node() public Lukas Wunner
2016-07-28 0:25 ` [PATCH 3/6] efi: Add device path parser Lukas Wunner
2016-08-04 14:57 ` [PATCH 0/6] Apple device properties Matt Fleming
2016-08-09 13:38 ` Lukas Wunner
2016-08-15 11:54 ` Matt Fleming
2016-08-15 16:13 ` Lukas Wunner
2016-08-18 20:34 ` Matt Fleming
[not found] ` <20160818203433.GP30909-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>
2016-08-22 9:58 ` Lukas Wunner
2016-08-22 9:58 ` Lukas Wunner
2016-08-24 19:49 ` Matt Fleming
-- strict thread matches above, loose matches on Subject: below --
2016-07-28 0:25 Lukas Wunner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1469616641.git.lukas@wunner.de \
--to=lukas@wunner.de \
--cc=aleksey.makarov@linaro.org \
--cc=andreas.noever@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=grub-devel@gnu.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@codeblueprint.co.uk \
--cc=mika.westerberg@linux.intel.com \
--cc=pierre.morrow@free.fr \
--cc=rafael.j.wysocki@intel.com \
--cc=reverser@put.as \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.