[PATCH 0/4] Some documentation fixes

[PATCH 0/4] Some documentation fixes

[Mauro Carvalho Chehab]

This patch series address a few issues at the documentation, after
applying this patch series:
   https://lkml.org/lkml/2017/4/16/2

The first patch solves a limitation with Sphinx and literal blocks
inside a footnote.

The next two patches fix issues with xpad.rst documentation, with
mentions /proc/bus/usb/, with used to be part of usbfs. When usbfs
got removed, the old location changed. So, update accordingly.

The final patch is RFC: it adds the uapi input.h file to the
documentation and groups the kAPI documentation generated from the
source code together with the kAPI part of the linux-input book.
We need to discuss it with documentation maintainers, to get an
agreement if this is the best way to handle it.

Mauro Carvalho Chehab (4):
  input: xpad.rst: usb/devices is now at /sys/kernel/debug/
  input: xpad.rst: Don't use literal blocks inside footnotes
  input: xpad.rst: proc/bus/usb was renamed to dev/bus/usb
  [RFC] input: add kAPI and uAPI kernel-doc stuff at the input book

 Documentation/driver-api/iio/intro.rst             |  4 +-
 Documentation/driver-api/index.rst                 |  1 -
 Documentation/input/devices/xpad.rst               | 53 +++++++++++-----------
 Documentation/input/input_kapi.rst                 |  1 +
 .../input.rst => input/input_kapi_symbols.rst}     |  6 ++-
 Documentation/input/input_uapi.rst                 |  1 +
 Documentation/input/input_uapi_symbols.rst         |  4 ++
 7 files changed, 38 insertions(+), 32 deletions(-)
 rename Documentation/{driver-api/input.rst => input/input_kapi_symbols.rst} (93%)
 create mode 100644 Documentation/input/input_uapi_symbols.rst

-- 
2.9.3

[PATCH 1/4] input: xpad.rst: usb/devices is now at /sys/kernel/debug/

[Mauro Carvalho Chehab]

The /proc/bus/usb/devices got moved to sysfs. It is now
sitting	at:
        /sys/kernel/debug/usb/devices

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 Documentation/input/devices/xpad.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
index 80028433b460..e19669fe5a80 100644
--- a/Documentation/input/devices/xpad.rst
+++ b/Documentation/input/devices/xpad.rst
@@ -138,7 +138,7 @@ Driver Installation
 
 Once you have the adapter cable, if needed, and the controller connected
 the xpad module should be auto loaded. To confirm you can cat
-/proc/bus/usb/devices. There should be an entry like the one at the end [4]_.
+/sys/kernel/debug/usb/devices. There should be an entry like the one at the end [4]_.
 
 
 
@@ -202,7 +202,7 @@ References
 .. [1] http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
 .. [2] http://xpad.xbox-scene.com/
 .. [3] http://www.markosweb.com/www/xboxhackz.com/
-.. [4] /proc/bus/usb/devices - dump from InterAct PowerPad Pro (Germany):
+.. [4] /sys/kernel/debug/usb/devices - dump from InterAct PowerPad Pro (Germany):
 
  ::
 
@@ -213,7 +213,7 @@ References
     I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
     E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
     E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
-.. [5] /proc/bus/usb/devices - dump from Redoctane Xbox Dance Pad (US):
+.. [5] /sys/kernel/debug/usb/devices - dump from Redoctane Xbox Dance Pad (US):
 
  ::
 
-- 
2.9.3

Re: [PATCH 1/4] input: xpad.rst: usb/devices is now at /sys/kernel/debug/

[Dmitry Torokhov]

On Mon, Apr 17, 2017 at 09:46:13AM -0300, Mauro Carvalho Chehab wrote:
> The /proc/bus/usb/devices got moved to sysfs. It is now
> sitting	at:
>         /sys/kernel/debug/usb/devices
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Applied, thank you.

> ---
>  Documentation/input/devices/xpad.rst | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
> index 80028433b460..e19669fe5a80 100644
> --- a/Documentation/input/devices/xpad.rst
> +++ b/Documentation/input/devices/xpad.rst
> @@ -138,7 +138,7 @@ Driver Installation
>  
>  Once you have the adapter cable, if needed, and the controller connected
>  the xpad module should be auto loaded. To confirm you can cat
> -/proc/bus/usb/devices. There should be an entry like the one at the end [4]_.
> +/sys/kernel/debug/usb/devices. There should be an entry like the one at the end [4]_.
>  
>  
>  
> @@ -202,7 +202,7 @@ References
>  .. [1] http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
>  .. [2] http://xpad.xbox-scene.com/
>  .. [3] http://www.markosweb.com/www/xboxhackz.com/
> -.. [4] /proc/bus/usb/devices - dump from InterAct PowerPad Pro (Germany):
> +.. [4] /sys/kernel/debug/usb/devices - dump from InterAct PowerPad Pro (Germany):
>  
>   ::
>  
> @@ -213,7 +213,7 @@ References
>      I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
>      E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
>      E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> -.. [5] /proc/bus/usb/devices - dump from Redoctane Xbox Dance Pad (US):
> +.. [5] /sys/kernel/debug/usb/devices - dump from Redoctane Xbox Dance Pad (US):
>  
>   ::
>  
> -- 
> 2.9.3
> 

-- 
Dmitry

[PATCH 2/4] input: xpad.rst: Don't use literal blocks inside footnotes

[Mauro Carvalho Chehab]

Unfortunately, Sphinx (or LaTeX) can't handle literal blocks
inside footnotes. So, just use normal text for the two
literal code-blocks that documents the output of
/sys/kernel/debug/usb/devices for xpad devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 Documentation/input/devices/xpad.rst | 51 ++++++++++++++++++------------------
 1 file changed, 25 insertions(+), 26 deletions(-)

diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
index e19669fe5a80..c7c4e154bd34 100644
--- a/Documentation/input/devices/xpad.rst
+++ b/Documentation/input/devices/xpad.rst
@@ -138,15 +138,37 @@ Driver Installation
 
 Once you have the adapter cable, if needed, and the controller connected
 the xpad module should be auto loaded. To confirm you can cat
-/sys/kernel/debug/usb/devices. There should be an entry like the one at the end [4]_.
+/sys/kernel/debug/usb/devices. There should be an entry like those:
 
+.. code-block:: none
+   :caption: dump from InterAct PowerPad Pro (Germany)
+
+    T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
+    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs=  1
+    P:  Vendor=05fd ProdID=107a Rev= 1.00
+    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
+    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
+    E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
+    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
+
+.. code-block:: none
+   :caption: dump from Redoctane Xbox Dance Pad (US)
+
+    T:  Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12  MxCh= 0
+    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
+    P:  Vendor=0c12 ProdID=8809 Rev= 0.01
+    S:  Product=XBOX DDR
+    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
+    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
+    E:  Ad=82(I) Atr=03(Int.) MxPS=  32 Ivl=4ms
+    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl=4ms
 
 
 Supported Controllers
 =====================
 
 For a full list of supported controllers and associated vendor and product
-IDs see the xpad_device[] array[6].
+IDs see the xpad_device[] array\ [4]_.
 
 As of the historic version 0.0.6 (2006-10-10) the following devices
 were supported::
@@ -202,30 +224,7 @@ References
 .. [1] http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
 .. [2] http://xpad.xbox-scene.com/
 .. [3] http://www.markosweb.com/www/xboxhackz.com/
-.. [4] /sys/kernel/debug/usb/devices - dump from InterAct PowerPad Pro (Germany):
-
- ::
-
-    T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
-    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs=  1
-    P:  Vendor=05fd ProdID=107a Rev= 1.00
-    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
-    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
-    E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
-    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
-.. [5] /sys/kernel/debug/usb/devices - dump from Redoctane Xbox Dance Pad (US):
-
- ::
-
-    T:  Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12  MxCh= 0
-    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
-    P:  Vendor=0c12 ProdID=8809 Rev= 0.01
-    S:  Product=XBOX DDR
-    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
-    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
-    E:  Ad=82(I) Atr=03(Int.) MxPS=  32 Ivl=4ms
-    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl=4ms
-.. [6] http://lxr.free-electrons.com/ident?i=xpad_device
+.. [4] http://lxr.free-electrons.com/ident?i=xpad_device
 
 
 Historic Edits
-- 
2.9.3

Re: [PATCH 2/4] input: xpad.rst: Don't use literal blocks inside footnotes

[Dmitry Torokhov]

On Mon, Apr 17, 2017 at 09:46:14AM -0300, Mauro Carvalho Chehab wrote:
> Unfortunately, Sphinx (or LaTeX) can't handle literal blocks
> inside footnotes. So, just use normal text for the two
> literal code-blocks that documents the output of
> /sys/kernel/debug/usb/devices for xpad devices.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Applied, thank you.

> ---
>  Documentation/input/devices/xpad.rst | 51 ++++++++++++++++++------------------
>  1 file changed, 25 insertions(+), 26 deletions(-)
> 
> diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
> index e19669fe5a80..c7c4e154bd34 100644
> --- a/Documentation/input/devices/xpad.rst
> +++ b/Documentation/input/devices/xpad.rst
> @@ -138,15 +138,37 @@ Driver Installation
>  
>  Once you have the adapter cable, if needed, and the controller connected
>  the xpad module should be auto loaded. To confirm you can cat
> -/sys/kernel/debug/usb/devices. There should be an entry like the one at the end [4]_.
> +/sys/kernel/debug/usb/devices. There should be an entry like those:
>  
> +.. code-block:: none
> +   :caption: dump from InterAct PowerPad Pro (Germany)
> +
> +    T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
> +    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs=  1
> +    P:  Vendor=05fd ProdID=107a Rev= 1.00
> +    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> +    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
> +    E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> +    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> +
> +.. code-block:: none
> +   :caption: dump from Redoctane Xbox Dance Pad (US)
> +
> +    T:  Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12  MxCh= 0
> +    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> +    P:  Vendor=0c12 ProdID=8809 Rev= 0.01
> +    S:  Product=XBOX DDR
> +    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> +    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
> +    E:  Ad=82(I) Atr=03(Int.) MxPS=  32 Ivl=4ms
> +    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl=4ms
>  
>  
>  Supported Controllers
>  =====================
>  
>  For a full list of supported controllers and associated vendor and product
> -IDs see the xpad_device[] array[6].
> +IDs see the xpad_device[] array\ [4]_.
>  
>  As of the historic version 0.0.6 (2006-10-10) the following devices
>  were supported::
> @@ -202,30 +224,7 @@ References
>  .. [1] http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
>  .. [2] http://xpad.xbox-scene.com/
>  .. [3] http://www.markosweb.com/www/xboxhackz.com/
> -.. [4] /sys/kernel/debug/usb/devices - dump from InterAct PowerPad Pro (Germany):
> -
> - ::
> -
> -    T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
> -    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs=  1
> -    P:  Vendor=05fd ProdID=107a Rev= 1.00
> -    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> -    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
> -    E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> -    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl= 10ms
> -.. [5] /sys/kernel/debug/usb/devices - dump from Redoctane Xbox Dance Pad (US):
> -
> - ::
> -
> -    T:  Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12  MxCh= 0
> -    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> -    P:  Vendor=0c12 ProdID=8809 Rev= 0.01
> -    S:  Product=XBOX DDR
> -    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> -    I:  If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
> -    E:  Ad=82(I) Atr=03(Int.) MxPS=  32 Ivl=4ms
> -    E:  Ad=02(O) Atr=03(Int.) MxPS=  32 Ivl=4ms
> -.. [6] http://lxr.free-electrons.com/ident?i=xpad_device
> +.. [4] http://lxr.free-electrons.com/ident?i=xpad_device
>  
>  
>  Historic Edits
> -- 
> 2.9.3
> 

-- 
Dmitry

[PATCH 3/4] input: xpad.rst: proc/bus/usb was renamed to dev/bus/usb

[Mauro Carvalho Chehab]

xpad.rst requests a dump of the USB description, as found
on the USB character device. When we got rid of usbfs,
its location change. Update it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 Documentation/input/devices/xpad.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
index c7c4e154bd34..3c74c185be7d 100644
--- a/Documentation/input/devices/xpad.rst
+++ b/Documentation/input/devices/xpad.rst
@@ -89,7 +89,7 @@ HOWEVER if you have an unknown dance pad not listed below, it will not
 work UNLESS you set "dpad_to_buttons" to 1 in the module configuration.
 
 PLEASE, if you have an unknown controller, email Dom <binary1230@yahoo.com> with
-a dump from /proc/bus/usb and a description of the pad (manufacturer, country,
+a dump from /dev/bus/usb and a description of the pad (manufacturer, country,
 whether it is a dance pad or normal controller) so that we can add your pad
 to the list of supported devices, ensuring that it will work out of the
 box in the future.
-- 
2.9.3

Re: [PATCH 3/4] input: xpad.rst: proc/bus/usb was renamed to dev/bus/usb

[Dmitry Torokhov]

Hi Mauro,

On Mon, Apr 17, 2017 at 09:46:15AM -0300, Mauro Carvalho Chehab wrote:
> xpad.rst requests a dump of the USB description, as found
> on the USB character device. When we got rid of usbfs,
> its location change. Update it.

I have not heard from Dom ever so I think the best option is to remove
this entire paragraph.

> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> ---
>  Documentation/input/devices/xpad.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
> index c7c4e154bd34..3c74c185be7d 100644
> --- a/Documentation/input/devices/xpad.rst
> +++ b/Documentation/input/devices/xpad.rst
> @@ -89,7 +89,7 @@ HOWEVER if you have an unknown dance pad not listed below, it will not
>  work UNLESS you set "dpad_to_buttons" to 1 in the module configuration.
>  
>  PLEASE, if you have an unknown controller, email Dom <binary1230@yahoo.com> with
> -a dump from /proc/bus/usb and a description of the pad (manufacturer, country,
> +a dump from /dev/bus/usb and a description of the pad (manufacturer, country,
>  whether it is a dance pad or normal controller) so that we can add your pad
>  to the list of supported devices, ensuring that it will work out of the
>  box in the future.
> -- 
> 2.9.3
> 

-- 
Dmitry

[PATCH 4/4] [RFC] input: add kAPI and uAPI kernel-doc stuff at the input book

[Mauro Carvalho Chehab]

Move the kAPI kernel-doc produced documentation to
Documentation/input and add uAPI documentation there too.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 Documentation/driver-api/iio/intro.rst                              | 4 ++--
 Documentation/driver-api/index.rst                                  | 1 -
 Documentation/input/input_kapi.rst                                  | 1 +
 .../{driver-api/input.rst => input/input_kapi_symbols.rst}          | 6 ++++--
 Documentation/input/input_uapi.rst                                  | 1 +
 Documentation/input/input_uapi_symbols.rst                          | 4 ++++
 6 files changed, 12 insertions(+), 5 deletions(-)
 rename Documentation/{driver-api/input.rst => input/input_kapi_symbols.rst} (93%)
 create mode 100644 Documentation/input/input_uapi_symbols.rst

diff --git a/Documentation/driver-api/iio/intro.rst b/Documentation/driver-api/iio/intro.rst
index 3653fbd57069..696f7f99a459 100644
--- a/Documentation/driver-api/iio/intro.rst
+++ b/Documentation/driver-api/iio/intro.rst
@@ -8,9 +8,9 @@ The main purpose of the Industrial I/O subsystem (IIO) is to provide support
 for devices that in some sense perform either
 analog-to-digital conversion (ADC) or digital-to-analog conversion (DAC)
 or both. The aim is to fill the gap between the somewhat similar hwmon and
-:doc:`input <../input>` subsystems. Hwmon is directed at low sample rate
+:ref:`input <input_kapi>` subsystems. Hwmon is directed at low sample rate
 sensors used to monitor and control the system itself, like fan speed control
-or temperature measurement. :doc:`Input <../input>` is, as its name suggests,
+or temperature measurement. :ref:`Input <input_kapi>` is, as its name suggests,
 focused on human interaction input devices (keyboard, mouse, touchscreen).
 In some cases there is considerable overlap between these and IIO.
 
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 60db00d1532b..d7bc5e8bf3a1 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -25,7 +25,6 @@ available subsections can be seen below.
    frame-buffer
    regulator
    iio/index
-   input
    usb
    spi
    i2c
diff --git a/Documentation/input/input_kapi.rst b/Documentation/input/input_kapi.rst
index 41f1b7e6b78e..b3ee24881773 100644
--- a/Documentation/input/input_kapi.rst
+++ b/Documentation/input/input_kapi.rst
@@ -15,3 +15,4 @@ Linux Input Subsystem kernel API
    input-programming
    gameport-programming
    notifier
+   input_kapi_symbols
diff --git a/Documentation/driver-api/input.rst b/Documentation/input/input_kapi_symbols.rst
similarity index 93%
rename from Documentation/driver-api/input.rst
rename to Documentation/input/input_kapi_symbols.rst
index d05bf58fa83e..b85b34303f72 100644
--- a/Documentation/driver-api/input.rst
+++ b/Documentation/input/input_kapi_symbols.rst
@@ -1,5 +1,7 @@
-Input Subsystem
-===============
+.. _input_kapi:
+
+Input kAPI reference
+====================
 
 Input core
 ----------
diff --git a/Documentation/input/input_uapi.rst b/Documentation/input/input_uapi.rst
index 12ef8974a773..59596af7e01f 100644
--- a/Documentation/input/input_uapi.rst
+++ b/Documentation/input/input_uapi.rst
@@ -19,3 +19,4 @@ Linux Input Subsystem userspace API
    ff
    joydev/index
    userio
+   input_uapi_symbols
diff --git a/Documentation/input/input_uapi_symbols.rst b/Documentation/input/input_uapi_symbols.rst
new file mode 100644
index 000000000000..9cb29d10e483
--- /dev/null
+++ b/Documentation/input/input_uapi_symbols.rst
@@ -0,0 +1,4 @@
+Input uAPI reference
+====================
+
+.. kernel-doc:: include/uapi/linux/input.h
-- 
2.9.3