* [PATCH net-next 0/6] Multipath tests for tunnel devices
@ 2018-06-26 0:05 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:05 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
This patchset adds a test for ECMP and weighted ECMP between two GRE
tunnels.
In patches #1 and #2, the function multipath_eval() is first moved from
router_multipath.sh to lib.sh for ease of reuse, and then fixed up.
In patch #3, the function tc_rule_stats_get() is parameterized to be
useful for egress rules as well.
In patch #4, a new function __simple_if_init() is extracted from
simple_if_init(). This covers the logic that needs to be done for the
usual interface: VRF migration, upping and installation of IP addresses.
Patch #5 then adds the test itself.
Additionally in patch #6, a requirement to add diagrams to selftests is
documented.
Petr Machata (6):
selftests: forwarding: Move multipath_eval() to lib.sh
selftests: forwarding: multipath_eval(): Improve style
selftests: forwarding: tc_rule_stats_get: Parameterize direction
selftests: forwarding: lib: Extract interface-init functions
selftests: forwarding: Test multipath tunneling
selftests: forwarding: README: Require diagrams
tools/testing/selftests/net/forwarding/README | 2 +
.../selftests/net/forwarding/gre_multipath.sh | 354 +++++++++++++++++++++
tools/testing/selftests/net/forwarding/lib.sh | 80 ++++-
.../selftests/net/forwarding/router_multipath.sh | 39 ---
4 files changed, 427 insertions(+), 48 deletions(-)
create mode 100755 tools/testing/selftests/net/forwarding/gre_multipath.sh
--
2.4.11
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH net-next 0/6] Multipath tests for tunnel devices
@ 2018-06-26 0:05 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:05 UTC (permalink / raw)
This patchset adds a test for ECMP and weighted ECMP between two GRE
tunnels.
In patches #1 and #2, the function multipath_eval() is first moved from
router_multipath.sh to lib.sh for ease of reuse, and then fixed up.
In patch #3, the function tc_rule_stats_get() is parameterized to be
useful for egress rules as well.
In patch #4, a new function __simple_if_init() is extracted from
simple_if_init(). This covers the logic that needs to be done for the
usual interface: VRF migration, upping and installation of IP addresses.
Patch #5 then adds the test itself.
Additionally in patch #6, a requirement to add diagrams to selftests is
documented.
Petr Machata (6):
selftests: forwarding: Move multipath_eval() to lib.sh
selftests: forwarding: multipath_eval(): Improve style
selftests: forwarding: tc_rule_stats_get: Parameterize direction
selftests: forwarding: lib: Extract interface-init functions
selftests: forwarding: Test multipath tunneling
selftests: forwarding: README: Require diagrams
tools/testing/selftests/net/forwarding/README | 2 +
.../selftests/net/forwarding/gre_multipath.sh | 354 +++++++++++++++++++++
tools/testing/selftests/net/forwarding/lib.sh | 80 ++++-
.../selftests/net/forwarding/router_multipath.sh | 39 ---
4 files changed, 427 insertions(+), 48 deletions(-)
create mode 100755 tools/testing/selftests/net/forwarding/gre_multipath.sh
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH net-next 1/6] selftests: forwarding: Move multipath_eval() to lib.sh
@ 2018-06-26 0:06 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: petrm @ 2018-06-26 0:06 UTC (permalink / raw)
This function will be useful for the GRE multipath test that is coming
later.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 39 ++++++++++++++++++++++
.../selftests/net/forwarding/router_multipath.sh | 39 ----------------------
2 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 7b18a53aa556..7fae805147ae 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -557,6 +557,45 @@ tests_run()
done
}
+multipath_eval()
+{
+ local desc="$1"
+ local weight_rp12=$2
+ local weight_rp13=$3
+ local packets_rp12=$4
+ local packets_rp13=$5
+ local weights_ratio packets_ratio diff
+
+ RET=0
+
+ if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+ check_err 1 "Packet difference is 0"
+ log_test "Multipath"
+ log_info "Expected ratio $weights_ratio"
+ return
+ fi
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+ | bc -l)
+ packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+ | bc -l)
+ else
+ weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
+ bc -l)
+ packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
+ bc -l)
+ fi
+
+ diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+ diff=${diff#-}
+
+ test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+ check_err $? "Too large discrepancy between expected and measured ratios"
+ log_test "$desc"
+ log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+}
+
##############################################################################
# Tests
diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh
index 8b6d0fb6d604..79a209927962 100755
--- a/tools/testing/selftests/net/forwarding/router_multipath.sh
+++ b/tools/testing/selftests/net/forwarding/router_multipath.sh
@@ -159,45 +159,6 @@ router2_destroy()
vrf_destroy "vrf-r2"
}
-multipath_eval()
-{
- local desc="$1"
- local weight_rp12=$2
- local weight_rp13=$3
- local packets_rp12=$4
- local packets_rp13=$5
- local weights_ratio packets_ratio diff
-
- RET=0
-
- if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
- check_err 1 "Packet difference is 0"
- log_test "Multipath"
- log_info "Expected ratio $weights_ratio"
- return
- fi
-
- if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
- weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
- | bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
- | bc -l)
- else
- weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
- bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
- bc -l)
- fi
-
- diff=$(echo $weights_ratio - $packets_ratio | bc -l)
- diff=${diff#-}
-
- test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
- check_err $? "Too large discrepancy between expected and measured ratios"
- log_test "$desc"
- log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
-}
-
multipath4_test()
{
local desc="$1"
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 1/6] selftests: forwarding: Move multipath_eval() to lib.sh
@ 2018-06-26 0:06 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:06 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
This function will be useful for the GRE multipath test that is coming
later.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 39 ++++++++++++++++++++++
.../selftests/net/forwarding/router_multipath.sh | 39 ----------------------
2 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 7b18a53aa556..7fae805147ae 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -557,6 +557,45 @@ tests_run()
done
}
+multipath_eval()
+{
+ local desc="$1"
+ local weight_rp12=$2
+ local weight_rp13=$3
+ local packets_rp12=$4
+ local packets_rp13=$5
+ local weights_ratio packets_ratio diff
+
+ RET=0
+
+ if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+ check_err 1 "Packet difference is 0"
+ log_test "Multipath"
+ log_info "Expected ratio $weights_ratio"
+ return
+ fi
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+ | bc -l)
+ packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+ | bc -l)
+ else
+ weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
+ bc -l)
+ packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
+ bc -l)
+ fi
+
+ diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+ diff=${diff#-}
+
+ test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+ check_err $? "Too large discrepancy between expected and measured ratios"
+ log_test "$desc"
+ log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+}
+
##############################################################################
# Tests
diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh
index 8b6d0fb6d604..79a209927962 100755
--- a/tools/testing/selftests/net/forwarding/router_multipath.sh
+++ b/tools/testing/selftests/net/forwarding/router_multipath.sh
@@ -159,45 +159,6 @@ router2_destroy()
vrf_destroy "vrf-r2"
}
-multipath_eval()
-{
- local desc="$1"
- local weight_rp12=$2
- local weight_rp13=$3
- local packets_rp12=$4
- local packets_rp13=$5
- local weights_ratio packets_ratio diff
-
- RET=0
-
- if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
- check_err 1 "Packet difference is 0"
- log_test "Multipath"
- log_info "Expected ratio $weights_ratio"
- return
- fi
-
- if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
- weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
- | bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
- | bc -l)
- else
- weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
- bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
- bc -l)
- fi
-
- diff=$(echo $weights_ratio - $packets_ratio | bc -l)
- diff=${diff#-}
-
- test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
- check_err $? "Too large discrepancy between expected and measured ratios"
- log_test "$desc"
- log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
-}
-
multipath4_test()
{
local desc="$1"
--
2.4.11
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 1/6] selftests: forwarding: Move multipath_eval() to lib.sh
@ 2018-06-26 0:06 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:06 UTC (permalink / raw)
This function will be useful for the GRE multipath test that is coming
later.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 39 ++++++++++++++++++++++
.../selftests/net/forwarding/router_multipath.sh | 39 ----------------------
2 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 7b18a53aa556..7fae805147ae 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -557,6 +557,45 @@ tests_run()
done
}
+multipath_eval()
+{
+ local desc="$1"
+ local weight_rp12=$2
+ local weight_rp13=$3
+ local packets_rp12=$4
+ local packets_rp13=$5
+ local weights_ratio packets_ratio diff
+
+ RET=0
+
+ if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+ check_err 1 "Packet difference is 0"
+ log_test "Multipath"
+ log_info "Expected ratio $weights_ratio"
+ return
+ fi
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+ | bc -l)
+ packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+ | bc -l)
+ else
+ weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
+ bc -l)
+ packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
+ bc -l)
+ fi
+
+ diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+ diff=${diff#-}
+
+ test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+ check_err $? "Too large discrepancy between expected and measured ratios"
+ log_test "$desc"
+ log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+}
+
##############################################################################
# Tests
diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh
index 8b6d0fb6d604..79a209927962 100755
--- a/tools/testing/selftests/net/forwarding/router_multipath.sh
+++ b/tools/testing/selftests/net/forwarding/router_multipath.sh
@@ -159,45 +159,6 @@ router2_destroy()
vrf_destroy "vrf-r2"
}
-multipath_eval()
-{
- local desc="$1"
- local weight_rp12=$2
- local weight_rp13=$3
- local packets_rp12=$4
- local packets_rp13=$5
- local weights_ratio packets_ratio diff
-
- RET=0
-
- if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
- check_err 1 "Packet difference is 0"
- log_test "Multipath"
- log_info "Expected ratio $weights_ratio"
- return
- fi
-
- if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
- weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
- | bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
- | bc -l)
- else
- weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
- bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
- bc -l)
- fi
-
- diff=$(echo $weights_ratio - $packets_ratio | bc -l)
- diff=${diff#-}
-
- test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
- check_err $? "Too large discrepancy between expected and measured ratios"
- log_test "$desc"
- log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
-}
-
multipath4_test()
{
local desc="$1"
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH net-next 2/6] selftests: forwarding: multipath_eval(): Improve style
@ 2018-06-26 0:07 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: petrm @ 2018-06-26 0:07 UTC (permalink / raw)
- Change the indentation of the function body from 7 spaces to one tab.
- Move initialization of weights_ratio up so that it can be referenced
from the error message about packet difference being zero.
- Move |'s consistently to continuation line, which reindent.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 74 ++++++++++++++-------------
1 file changed, 39 insertions(+), 35 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 7fae805147ae..911d753c4ff0 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -559,41 +559,45 @@ tests_run()
multipath_eval()
{
- local desc="$1"
- local weight_rp12=$2
- local weight_rp13=$3
- local packets_rp12=$4
- local packets_rp13=$5
- local weights_ratio packets_ratio diff
-
- RET=0
-
- if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
- check_err 1 "Packet difference is 0"
- log_test "Multipath"
- log_info "Expected ratio $weights_ratio"
- return
- fi
-
- if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
- weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
- | bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
- | bc -l)
- else
- weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
- bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
- bc -l)
- fi
-
- diff=$(echo $weights_ratio - $packets_ratio | bc -l)
- diff=${diff#-}
-
- test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
- check_err $? "Too large discrepancy between expected and measured ratios"
- log_test "$desc"
- log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+ local desc="$1"
+ local weight_rp12=$2
+ local weight_rp13=$3
+ local packets_rp12=$4
+ local packets_rp13=$5
+ local weights_ratio packets_ratio diff
+
+ RET=0
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+ | bc -l)
+ else
+ weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" \
+ | bc -l)
+ fi
+
+ if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+ check_err 1 "Packet difference is 0"
+ log_test "Multipath"
+ log_info "Expected ratio $weights_ratio"
+ return
+ fi
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+ | bc -l)
+ else
+ packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" \
+ | bc -l)
+ fi
+
+ diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+ diff=${diff#-}
+
+ test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+ check_err $? "Too large discrepancy between expected and measured ratios"
+ log_test "$desc"
+ log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
}
##############################################################################
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 2/6] selftests: forwarding: multipath_eval(): Improve style
@ 2018-06-26 0:07 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:07 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
- Change the indentation of the function body from 7 spaces to one tab.
- Move initialization of weights_ratio up so that it can be referenced
from the error message about packet difference being zero.
- Move |'s consistently to continuation line, which reindent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 74 ++++++++++++++-------------
1 file changed, 39 insertions(+), 35 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 7fae805147ae..911d753c4ff0 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -559,41 +559,45 @@ tests_run()
multipath_eval()
{
- local desc="$1"
- local weight_rp12=$2
- local weight_rp13=$3
- local packets_rp12=$4
- local packets_rp13=$5
- local weights_ratio packets_ratio diff
-
- RET=0
-
- if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
- check_err 1 "Packet difference is 0"
- log_test "Multipath"
- log_info "Expected ratio $weights_ratio"
- return
- fi
-
- if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
- weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
- | bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
- | bc -l)
- else
- weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
- bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
- bc -l)
- fi
-
- diff=$(echo $weights_ratio - $packets_ratio | bc -l)
- diff=${diff#-}
-
- test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
- check_err $? "Too large discrepancy between expected and measured ratios"
- log_test "$desc"
- log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+ local desc="$1"
+ local weight_rp12=$2
+ local weight_rp13=$3
+ local packets_rp12=$4
+ local packets_rp13=$5
+ local weights_ratio packets_ratio diff
+
+ RET=0
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+ | bc -l)
+ else
+ weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" \
+ | bc -l)
+ fi
+
+ if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+ check_err 1 "Packet difference is 0"
+ log_test "Multipath"
+ log_info "Expected ratio $weights_ratio"
+ return
+ fi
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+ | bc -l)
+ else
+ packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" \
+ | bc -l)
+ fi
+
+ diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+ diff=${diff#-}
+
+ test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+ check_err $? "Too large discrepancy between expected and measured ratios"
+ log_test "$desc"
+ log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
}
##############################################################################
--
2.4.11
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 2/6] selftests: forwarding: multipath_eval(): Improve style
@ 2018-06-26 0:07 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:07 UTC (permalink / raw)
- Change the indentation of the function body from 7 spaces to one tab.
- Move initialization of weights_ratio up so that it can be referenced
from the error message about packet difference being zero.
- Move |'s consistently to continuation line, which reindent.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 74 ++++++++++++++-------------
1 file changed, 39 insertions(+), 35 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 7fae805147ae..911d753c4ff0 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -559,41 +559,45 @@ tests_run()
multipath_eval()
{
- local desc="$1"
- local weight_rp12=$2
- local weight_rp13=$3
- local packets_rp12=$4
- local packets_rp13=$5
- local weights_ratio packets_ratio diff
-
- RET=0
-
- if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
- check_err 1 "Packet difference is 0"
- log_test "Multipath"
- log_info "Expected ratio $weights_ratio"
- return
- fi
-
- if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
- weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
- | bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
- | bc -l)
- else
- weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
- bc -l)
- packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
- bc -l)
- fi
-
- diff=$(echo $weights_ratio - $packets_ratio | bc -l)
- diff=${diff#-}
-
- test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
- check_err $? "Too large discrepancy between expected and measured ratios"
- log_test "$desc"
- log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+ local desc="$1"
+ local weight_rp12=$2
+ local weight_rp13=$3
+ local packets_rp12=$4
+ local packets_rp13=$5
+ local weights_ratio packets_ratio diff
+
+ RET=0
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+ | bc -l)
+ else
+ weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" \
+ | bc -l)
+ fi
+
+ if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+ check_err 1 "Packet difference is 0"
+ log_test "Multipath"
+ log_info "Expected ratio $weights_ratio"
+ return
+ fi
+
+ if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+ packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+ | bc -l)
+ else
+ packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" \
+ | bc -l)
+ fi
+
+ diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+ diff=${diff#-}
+
+ test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+ check_err $? "Too large discrepancy between expected and measured ratios"
+ log_test "$desc"
+ log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
}
##############################################################################
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH net-next 3/6] selftests: forwarding: tc_rule_stats_get: Parameterize direction
@ 2018-06-26 0:07 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: petrm @ 2018-06-26 0:07 UTC (permalink / raw)
The GRE multipath tests need stats on an egress counter. Change
tc_rule_stats_get() to take direction as an optional argument, with
default of ingress.
Take the opportunity to change line continuation character from | to \.
Move the | to the next line, which indent.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 911d753c4ff0..f94ea4bafa13 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -383,9 +383,10 @@ tc_rule_stats_get()
{
local dev=$1; shift
local pref=$1; shift
+ local dir=$1; shift
- tc -j -s filter show dev $dev ingress pref $pref |
- jq '.[1].options.actions[].stats.packets'
+ tc -j -s filter show dev $dev ${dir:-ingress} pref $pref \
+ | jq '.[1].options.actions[].stats.packets'
}
mac_get()
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 3/6] selftests: forwarding: tc_rule_stats_get: Parameterize direction
@ 2018-06-26 0:07 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:07 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
The GRE multipath tests need stats on an egress counter. Change
tc_rule_stats_get() to take direction as an optional argument, with
default of ingress.
Take the opportunity to change line continuation character from | to \.
Move the | to the next line, which indent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 911d753c4ff0..f94ea4bafa13 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -383,9 +383,10 @@ tc_rule_stats_get()
{
local dev=$1; shift
local pref=$1; shift
+ local dir=$1; shift
- tc -j -s filter show dev $dev ingress pref $pref |
- jq '.[1].options.actions[].stats.packets'
+ tc -j -s filter show dev $dev ${dir:-ingress} pref $pref \
+ | jq '.[1].options.actions[].stats.packets'
}
mac_get()
--
2.4.11
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 3/6] selftests: forwarding: tc_rule_stats_get: Parameterize direction
@ 2018-06-26 0:07 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:07 UTC (permalink / raw)
The GRE multipath tests need stats on an egress counter. Change
tc_rule_stats_get() to take direction as an optional argument, with
default of ingress.
Take the opportunity to change line continuation character from | to \.
Move the | to the next line, which indent.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 911d753c4ff0..f94ea4bafa13 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -383,9 +383,10 @@ tc_rule_stats_get()
{
local dev=$1; shift
local pref=$1; shift
+ local dir=$1; shift
- tc -j -s filter show dev $dev ingress pref $pref |
- jq '.[1].options.actions[].stats.packets'
+ tc -j -s filter show dev $dev ${dir:-ingress} pref $pref \
+ | jq '.[1].options.actions[].stats.packets'
}
mac_get()
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH net-next 4/6] selftests: forwarding: lib: Extract interface-init functions
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: petrm @ 2018-06-26 0:08 UTC (permalink / raw)
The function simple_if_init() does two things: it creates a VRF, then
moves an interface into this VRF and configures addresses. The latter
comes in handy when adding more interfaces into a VRF later on. The
situation is similar for simple_if_fini().
Therefore split the interface remastering and address de/initialization
logic to a new pair of helpers __simple_if_init() / __simple_if_fini(),
and defer to these helpers from simple_if_init() and simple_if_fini().
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 32 +++++++++++++++++++++------
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index f94ea4bafa13..1dfdf14894e2 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -287,6 +287,29 @@ __addr_add_del()
done
}
+__simple_if_init()
+{
+ local if_name=$1; shift
+ local vrf_name=$1; shift
+ local addrs=("${@}")
+
+ ip link set dev $if_name master $vrf_name
+ ip link set dev $if_name up
+
+ __addr_add_del $if_name add "${addrs[@]}"
+}
+
+__simple_if_fini()
+{
+ local if_name=$1; shift
+ local addrs=("${@}")
+
+ __addr_add_del $if_name del "${addrs[@]}"
+
+ ip link set dev $if_name down
+ ip link set dev $if_name nomaster
+}
+
simple_if_init()
{
local if_name=$1
@@ -298,11 +321,8 @@ simple_if_init()
array=("${@}")
vrf_create $vrf_name
- ip link set dev $if_name master $vrf_name
ip link set dev $vrf_name up
- ip link set dev $if_name up
-
- __addr_add_del $if_name add "${array[@]}"
+ __simple_if_init $if_name $vrf_name "${array[@]}"
}
simple_if_fini()
@@ -315,9 +335,7 @@ simple_if_fini()
vrf_name=v$if_name
array=("${@}")
- __addr_add_del $if_name del "${array[@]}"
-
- ip link set dev $if_name down
+ __simple_if_fini $if_name "${array[@]}"
vrf_destroy $vrf_name
}
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 4/6] selftests: forwarding: lib: Extract interface-init functions
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:08 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
The function simple_if_init() does two things: it creates a VRF, then
moves an interface into this VRF and configures addresses. The latter
comes in handy when adding more interfaces into a VRF later on. The
situation is similar for simple_if_fini().
Therefore split the interface remastering and address de/initialization
logic to a new pair of helpers __simple_if_init() / __simple_if_fini(),
and defer to these helpers from simple_if_init() and simple_if_fini().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 32 +++++++++++++++++++++------
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index f94ea4bafa13..1dfdf14894e2 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -287,6 +287,29 @@ __addr_add_del()
done
}
+__simple_if_init()
+{
+ local if_name=$1; shift
+ local vrf_name=$1; shift
+ local addrs=("${@}")
+
+ ip link set dev $if_name master $vrf_name
+ ip link set dev $if_name up
+
+ __addr_add_del $if_name add "${addrs[@]}"
+}
+
+__simple_if_fini()
+{
+ local if_name=$1; shift
+ local addrs=("${@}")
+
+ __addr_add_del $if_name del "${addrs[@]}"
+
+ ip link set dev $if_name down
+ ip link set dev $if_name nomaster
+}
+
simple_if_init()
{
local if_name=$1
@@ -298,11 +321,8 @@ simple_if_init()
array=("${@}")
vrf_create $vrf_name
- ip link set dev $if_name master $vrf_name
ip link set dev $vrf_name up
- ip link set dev $if_name up
-
- __addr_add_del $if_name add "${array[@]}"
+ __simple_if_init $if_name $vrf_name "${array[@]}"
}
simple_if_fini()
@@ -315,9 +335,7 @@ simple_if_fini()
vrf_name=v$if_name
array=("${@}")
- __addr_add_del $if_name del "${array[@]}"
-
- ip link set dev $if_name down
+ __simple_if_fini $if_name "${array[@]}"
vrf_destroy $vrf_name
}
--
2.4.11
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 4/6] selftests: forwarding: lib: Extract interface-init functions
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:08 UTC (permalink / raw)
The function simple_if_init() does two things: it creates a VRF, then
moves an interface into this VRF and configures addresses. The latter
comes in handy when adding more interfaces into a VRF later on. The
situation is similar for simple_if_fini().
Therefore split the interface remastering and address de/initialization
logic to a new pair of helpers __simple_if_init() / __simple_if_fini(),
and defer to these helpers from simple_if_init() and simple_if_fini().
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/lib.sh | 32 +++++++++++++++++++++------
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index f94ea4bafa13..1dfdf14894e2 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -287,6 +287,29 @@ __addr_add_del()
done
}
+__simple_if_init()
+{
+ local if_name=$1; shift
+ local vrf_name=$1; shift
+ local addrs=("${@}")
+
+ ip link set dev $if_name master $vrf_name
+ ip link set dev $if_name up
+
+ __addr_add_del $if_name add "${addrs[@]}"
+}
+
+__simple_if_fini()
+{
+ local if_name=$1; shift
+ local addrs=("${@}")
+
+ __addr_add_del $if_name del "${addrs[@]}"
+
+ ip link set dev $if_name down
+ ip link set dev $if_name nomaster
+}
+
simple_if_init()
{
local if_name=$1
@@ -298,11 +321,8 @@ simple_if_init()
array=("${@}")
vrf_create $vrf_name
- ip link set dev $if_name master $vrf_name
ip link set dev $vrf_name up
- ip link set dev $if_name up
-
- __addr_add_del $if_name add "${array[@]}"
+ __simple_if_init $if_name $vrf_name "${array[@]}"
}
simple_if_fini()
@@ -315,9 +335,7 @@ simple_if_fini()
vrf_name=v$if_name
array=("${@}")
- __addr_add_del $if_name del "${array[@]}"
-
- ip link set dev $if_name down
+ __simple_if_fini $if_name "${array[@]}"
vrf_destroy $vrf_name
}
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH net-next 5/6] selftests: forwarding: Test multipath tunneling
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: petrm @ 2018-06-26 0:08 UTC (permalink / raw)
Add a GRE-tunneling test such that there are two tunnels involved, with
a multipath route listing both as next hops. Similarly to
router_multipath.sh, test that the distribution of traffic to the
tunnels honors the configured weights.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
.../selftests/net/forwarding/gre_multipath.sh | 354 +++++++++++++++++++++
1 file changed, 354 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/gre_multipath.sh
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh
new file mode 100755
index 000000000000..982cc8c23200
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh
@@ -0,0 +1,354 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when a wECMP route forwards traffic to two GRE
+# tunnels.
+#
+# +-------------------------+
+# | H1 |
+# | $h1 + |
+# | 192.0.2.1/28 | |
+# | 2001:db8:1::1/64 | |
+# +-------------------|-----+
+# |
+# +-------------------|------------------------+
+# | SW1 | |
+# | $ol1 + |
+# | 192.0.2.2/28 |
+# | 2001:db8:1::2/64 |
+# | |
+# | + g1a (gre) + g1b (gre) |
+# | loc=192.0.2.65 loc=192.0.2.81 |
+# | rem=192.0.2.66 --. rem=192.0.2.82 --. |
+# | tos=inherit | tos=inherit | |
+# | .------------------' | |
+# | | .------------------' |
+# | v v |
+# | + $ul1.111 (vlan) + $ul1.222 (vlan) |
+# | | 192.0.2.129/28 | 192.0.2.145/28 |
+# | \ / |
+# | \________________/ |
+# | | |
+# | + $ul1 |
+# +------------|-------------------------------+
+# |
+# +------------|-------------------------------+
+# | SW2 + $ul2 |
+# | _______|________ |
+# | / \ |
+# | / \ |
+# | + $ul2.111 (vlan) + $ul2.222 (vlan) |
+# | ^ 192.0.2.130/28 ^ 192.0.2.146/28 |
+# | | | |
+# | | '------------------. |
+# | '------------------. | |
+# | + g2a (gre) | + g2b (gre) | |
+# | loc=192.0.2.66 | loc=192.0.2.82 | |
+# | rem=192.0.2.65 --' rem=192.0.2.81 --' |
+# | tos=inherit tos=inherit |
+# | |
+# | $ol2 + |
+# | 192.0.2.17/28 | |
+# | 2001:db8:2::1/64 | |
+# +-------------------|------------------------+
+# |
+# +-------------------|-----+
+# | H2 | |
+# | $h2 + |
+# | 192.0.2.18/28 |
+# | 2001:db8:2::2/64 |
+# +-------------------------+
+
+ALL_TESTS="
+ ping_ipv4
+ ping_ipv6
+ multipath_ipv4
+ multipath_ipv6
+ multipath_ipv6_l4
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+ ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+ ip route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+ ip route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+ ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+ simple_if_fini $h1 192.0.2.1/28
+}
+
+sw1_create()
+{
+ simple_if_init $ol1 192.0.2.2/28 2001:db8:1::2/64
+ __simple_if_init $ul1 v$ol1
+ vlan_create $ul1 111 v$ol1 192.0.2.129/28
+ vlan_create $ul1 222 v$ol1 192.0.2.145/28
+
+ tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+ __simple_if_init g1a v$ol1 192.0.2.65/32
+ ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+ tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1
+ __simple_if_init g1b v$ol1 192.0.2.81/32
+ ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+
+ ip route add vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ ip route add vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+
+ tc qdisc add dev $ul1 clsact
+ tc filter add dev $ul1 egress pref 111 prot 802.1q \
+ flower vlan_id 111 action pass
+ tc filter add dev $ul1 egress pref 222 prot 802.1q \
+ flower vlan_id 222 action pass
+}
+
+sw1_destroy()
+{
+ tc qdisc del dev $ul1 clsact
+
+ ip route del vrf v$ol1 2001:db8:2::/64
+ ip route del vrf v$ol1 192.0.2.16/28
+
+ ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+ __simple_if_fini g1b 192.0.2.81/32
+ tunnel_destroy g1b
+
+ ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+ __simple_if_fini g1a 192.0.2.65/32
+ tunnel_destroy g1a
+
+ vlan_destroy $ul1 222
+ vlan_destroy $ul1 111
+ __simple_if_fini $ul1
+ simple_if_fini $ol1 192.0.2.2/28 2001:db8:1::2/64
+}
+
+sw2_create()
+{
+ simple_if_init $ol2 192.0.2.17/28 2001:db8:2::1/64
+ __simple_if_init $ul2 v$ol2
+ vlan_create $ul2 111 v$ol2 192.0.2.130/28
+ vlan_create $ul2 222 v$ol2 192.0.2.146/28
+
+ tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2
+ __simple_if_init g2a v$ol2 192.0.2.66/32
+ ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+
+ tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2
+ __simple_if_init g2b v$ol2 192.0.2.82/32
+ ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+
+ ip route add vrf v$ol2 192.0.2.0/28 \
+ nexthop dev g2a \
+ nexthop dev g2b
+ ip route add vrf v$ol2 2001:db8:1::/64 \
+ nexthop dev g2a \
+ nexthop dev g2b
+}
+
+sw2_destroy()
+{
+ ip route del vrf v$ol2 2001:db8:1::/64
+ ip route del vrf v$ol2 192.0.2.0/28
+
+ ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+ __simple_if_fini g2b 192.0.2.82/32
+ tunnel_destroy g2b
+
+ ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+ __simple_if_fini g2a 192.0.2.66/32
+ tunnel_destroy g2a
+
+ vlan_destroy $ul2 222
+ vlan_destroy $ul2 111
+ __simple_if_fini $ul2
+ simple_if_fini $ol2 192.0.2.17/28 2001:db8:2::1/64
+}
+
+h2_create()
+{
+ simple_if_init $h2 192.0.2.18/28 2001:db8:2::2/64
+ ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+ ip route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+ ip route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+ ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+ simple_if_fini $h2 192.0.2.18/28 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ ol1=${NETIFS[p2]}
+
+ ul1=${NETIFS[p3]}
+ ul2=${NETIFS[p4]}
+
+ ol2=${NETIFS[p5]}
+ h2=${NETIFS[p6]}
+
+ vrf_prepare
+ h1_create
+ sw1_create
+ sw2_create
+ h2_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ h2_destroy
+ sw2_destroy
+ sw1_destroy
+ h1_destroy
+ vrf_cleanup
+}
+
+multipath4_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ sysctl_set net.ipv4.fib_multipath_hash_policy 1
+ ip route replace vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ ip vrf exec v$h1 \
+ $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \
+ -d 1msec -t udp "sp=1024,dp=0-32768"
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ sysctl_set net.ipv6.fib_multipath_hash_policy 1
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ ip vrf exec v$h1 \
+ $MZ $h1 -6 -q -p 64 -A 2001:db8:1::1 -B 2001:db8:2::2 \
+ -d 1msec -t udp "sp=1024,dp=0-32768"
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ # Generate 16384 echo requests, each with a random flow label.
+ for ((i=0; i < 16384; ++i)); do
+ ip vrf exec v$h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q &> /dev/null
+ done
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+}
+
+ping_ipv4()
+{
+ ping_test $h1 192.0.2.18
+}
+
+ping_ipv6()
+{
+ ping6_test $h1 2001:db8:2::2
+}
+
+multipath_ipv4()
+{
+ log_info "Running IPv4 multipath tests"
+ multipath4_test "ECMP" 1 1
+ multipath4_test "Weighted MP 2:1" 2 1
+ multipath4_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6()
+{
+ log_info "Running IPv6 multipath tests"
+ multipath6_test "ECMP" 1 1
+ multipath6_test "Weighted MP 2:1" 2 1
+ multipath6_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6_l4()
+{
+ log_info "Running IPv6 L4 hash multipath tests"
+ multipath6_l4_test "ECMP" 1 1
+ multipath6_l4_test "Weighted MP 2:1" 2 1
+ multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 5/6] selftests: forwarding: Test multipath tunneling
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:08 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
Add a GRE-tunneling test such that there are two tunnels involved, with
a multipath route listing both as next hops. Similarly to
router_multipath.sh, test that the distribution of traffic to the
tunnels honors the configured weights.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
---
.../selftests/net/forwarding/gre_multipath.sh | 354 +++++++++++++++++++++
1 file changed, 354 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/gre_multipath.sh
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh
new file mode 100755
index 000000000000..982cc8c23200
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh
@@ -0,0 +1,354 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when a wECMP route forwards traffic to two GRE
+# tunnels.
+#
+# +-------------------------+
+# | H1 |
+# | $h1 + |
+# | 192.0.2.1/28 | |
+# | 2001:db8:1::1/64 | |
+# +-------------------|-----+
+# |
+# +-------------------|------------------------+
+# | SW1 | |
+# | $ol1 + |
+# | 192.0.2.2/28 |
+# | 2001:db8:1::2/64 |
+# | |
+# | + g1a (gre) + g1b (gre) |
+# | loc=192.0.2.65 loc=192.0.2.81 |
+# | rem=192.0.2.66 --. rem=192.0.2.82 --. |
+# | tos=inherit | tos=inherit | |
+# | .------------------' | |
+# | | .------------------' |
+# | v v |
+# | + $ul1.111 (vlan) + $ul1.222 (vlan) |
+# | | 192.0.2.129/28 | 192.0.2.145/28 |
+# | \ / |
+# | \________________/ |
+# | | |
+# | + $ul1 |
+# +------------|-------------------------------+
+# |
+# +------------|-------------------------------+
+# | SW2 + $ul2 |
+# | _______|________ |
+# | / \ |
+# | / \ |
+# | + $ul2.111 (vlan) + $ul2.222 (vlan) |
+# | ^ 192.0.2.130/28 ^ 192.0.2.146/28 |
+# | | | |
+# | | '------------------. |
+# | '------------------. | |
+# | + g2a (gre) | + g2b (gre) | |
+# | loc=192.0.2.66 | loc=192.0.2.82 | |
+# | rem=192.0.2.65 --' rem=192.0.2.81 --' |
+# | tos=inherit tos=inherit |
+# | |
+# | $ol2 + |
+# | 192.0.2.17/28 | |
+# | 2001:db8:2::1/64 | |
+# +-------------------|------------------------+
+# |
+# +-------------------|-----+
+# | H2 | |
+# | $h2 + |
+# | 192.0.2.18/28 |
+# | 2001:db8:2::2/64 |
+# +-------------------------+
+
+ALL_TESTS="
+ ping_ipv4
+ ping_ipv6
+ multipath_ipv4
+ multipath_ipv6
+ multipath_ipv6_l4
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+ ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+ ip route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+ ip route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+ ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+ simple_if_fini $h1 192.0.2.1/28
+}
+
+sw1_create()
+{
+ simple_if_init $ol1 192.0.2.2/28 2001:db8:1::2/64
+ __simple_if_init $ul1 v$ol1
+ vlan_create $ul1 111 v$ol1 192.0.2.129/28
+ vlan_create $ul1 222 v$ol1 192.0.2.145/28
+
+ tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+ __simple_if_init g1a v$ol1 192.0.2.65/32
+ ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+ tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1
+ __simple_if_init g1b v$ol1 192.0.2.81/32
+ ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+
+ ip route add vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ ip route add vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+
+ tc qdisc add dev $ul1 clsact
+ tc filter add dev $ul1 egress pref 111 prot 802.1q \
+ flower vlan_id 111 action pass
+ tc filter add dev $ul1 egress pref 222 prot 802.1q \
+ flower vlan_id 222 action pass
+}
+
+sw1_destroy()
+{
+ tc qdisc del dev $ul1 clsact
+
+ ip route del vrf v$ol1 2001:db8:2::/64
+ ip route del vrf v$ol1 192.0.2.16/28
+
+ ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+ __simple_if_fini g1b 192.0.2.81/32
+ tunnel_destroy g1b
+
+ ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+ __simple_if_fini g1a 192.0.2.65/32
+ tunnel_destroy g1a
+
+ vlan_destroy $ul1 222
+ vlan_destroy $ul1 111
+ __simple_if_fini $ul1
+ simple_if_fini $ol1 192.0.2.2/28 2001:db8:1::2/64
+}
+
+sw2_create()
+{
+ simple_if_init $ol2 192.0.2.17/28 2001:db8:2::1/64
+ __simple_if_init $ul2 v$ol2
+ vlan_create $ul2 111 v$ol2 192.0.2.130/28
+ vlan_create $ul2 222 v$ol2 192.0.2.146/28
+
+ tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2
+ __simple_if_init g2a v$ol2 192.0.2.66/32
+ ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+
+ tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2
+ __simple_if_init g2b v$ol2 192.0.2.82/32
+ ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+
+ ip route add vrf v$ol2 192.0.2.0/28 \
+ nexthop dev g2a \
+ nexthop dev g2b
+ ip route add vrf v$ol2 2001:db8:1::/64 \
+ nexthop dev g2a \
+ nexthop dev g2b
+}
+
+sw2_destroy()
+{
+ ip route del vrf v$ol2 2001:db8:1::/64
+ ip route del vrf v$ol2 192.0.2.0/28
+
+ ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+ __simple_if_fini g2b 192.0.2.82/32
+ tunnel_destroy g2b
+
+ ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+ __simple_if_fini g2a 192.0.2.66/32
+ tunnel_destroy g2a
+
+ vlan_destroy $ul2 222
+ vlan_destroy $ul2 111
+ __simple_if_fini $ul2
+ simple_if_fini $ol2 192.0.2.17/28 2001:db8:2::1/64
+}
+
+h2_create()
+{
+ simple_if_init $h2 192.0.2.18/28 2001:db8:2::2/64
+ ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+ ip route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+ ip route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+ ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+ simple_if_fini $h2 192.0.2.18/28 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ ol1=${NETIFS[p2]}
+
+ ul1=${NETIFS[p3]}
+ ul2=${NETIFS[p4]}
+
+ ol2=${NETIFS[p5]}
+ h2=${NETIFS[p6]}
+
+ vrf_prepare
+ h1_create
+ sw1_create
+ sw2_create
+ h2_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ h2_destroy
+ sw2_destroy
+ sw1_destroy
+ h1_destroy
+ vrf_cleanup
+}
+
+multipath4_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ sysctl_set net.ipv4.fib_multipath_hash_policy 1
+ ip route replace vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ ip vrf exec v$h1 \
+ $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \
+ -d 1msec -t udp "sp=1024,dp=0-32768"
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ sysctl_set net.ipv6.fib_multipath_hash_policy 1
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ ip vrf exec v$h1 \
+ $MZ $h1 -6 -q -p 64 -A 2001:db8:1::1 -B 2001:db8:2::2 \
+ -d 1msec -t udp "sp=1024,dp=0-32768"
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ # Generate 16384 echo requests, each with a random flow label.
+ for ((i=0; i < 16384; ++i)); do
+ ip vrf exec v$h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q &> /dev/null
+ done
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+}
+
+ping_ipv4()
+{
+ ping_test $h1 192.0.2.18
+}
+
+ping_ipv6()
+{
+ ping6_test $h1 2001:db8:2::2
+}
+
+multipath_ipv4()
+{
+ log_info "Running IPv4 multipath tests"
+ multipath4_test "ECMP" 1 1
+ multipath4_test "Weighted MP 2:1" 2 1
+ multipath4_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6()
+{
+ log_info "Running IPv6 multipath tests"
+ multipath6_test "ECMP" 1 1
+ multipath6_test "Weighted MP 2:1" 2 1
+ multipath6_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6_l4()
+{
+ log_info "Running IPv6 L4 hash multipath tests"
+ multipath6_l4_test "ECMP" 1 1
+ multipath6_l4_test "Weighted MP 2:1" 2 1
+ multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
--
2.4.11
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH net-next 5/6] selftests: forwarding: Test multipath tunneling
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:08 UTC (permalink / raw)
Add a GRE-tunneling test such that there are two tunnels involved, with
a multipath route listing both as next hops. Similarly to
router_multipath.sh, test that the distribution of traffic to the
tunnels honors the configured weights.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
.../selftests/net/forwarding/gre_multipath.sh | 354 +++++++++++++++++++++
1 file changed, 354 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/gre_multipath.sh
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh
new file mode 100755
index 000000000000..982cc8c23200
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh
@@ -0,0 +1,354 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when a wECMP route forwards traffic to two GRE
+# tunnels.
+#
+# +-------------------------+
+# | H1 |
+# | $h1 + |
+# | 192.0.2.1/28 | |
+# | 2001:db8:1::1/64 | |
+# +-------------------|-----+
+# |
+# +-------------------|------------------------+
+# | SW1 | |
+# | $ol1 + |
+# | 192.0.2.2/28 |
+# | 2001:db8:1::2/64 |
+# | |
+# | + g1a (gre) + g1b (gre) |
+# | loc=192.0.2.65 loc=192.0.2.81 |
+# | rem=192.0.2.66 --. rem=192.0.2.82 --. |
+# | tos=inherit | tos=inherit | |
+# | .------------------' | |
+# | | .------------------' |
+# | v v |
+# | + $ul1.111 (vlan) + $ul1.222 (vlan) |
+# | | 192.0.2.129/28 | 192.0.2.145/28 |
+# | \ / |
+# | \________________/ |
+# | | |
+# | + $ul1 |
+# +------------|-------------------------------+
+# |
+# +------------|-------------------------------+
+# | SW2 + $ul2 |
+# | _______|________ |
+# | / \ |
+# | / \ |
+# | + $ul2.111 (vlan) + $ul2.222 (vlan) |
+# | ^ 192.0.2.130/28 ^ 192.0.2.146/28 |
+# | | | |
+# | | '------------------. |
+# | '------------------. | |
+# | + g2a (gre) | + g2b (gre) | |
+# | loc=192.0.2.66 | loc=192.0.2.82 | |
+# | rem=192.0.2.65 --' rem=192.0.2.81 --' |
+# | tos=inherit tos=inherit |
+# | |
+# | $ol2 + |
+# | 192.0.2.17/28 | |
+# | 2001:db8:2::1/64 | |
+# +-------------------|------------------------+
+# |
+# +-------------------|-----+
+# | H2 | |
+# | $h2 + |
+# | 192.0.2.18/28 |
+# | 2001:db8:2::2/64 |
+# +-------------------------+
+
+ALL_TESTS="
+ ping_ipv4
+ ping_ipv6
+ multipath_ipv4
+ multipath_ipv6
+ multipath_ipv6_l4
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+ ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+ ip route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+ ip route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+ ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+ simple_if_fini $h1 192.0.2.1/28
+}
+
+sw1_create()
+{
+ simple_if_init $ol1 192.0.2.2/28 2001:db8:1::2/64
+ __simple_if_init $ul1 v$ol1
+ vlan_create $ul1 111 v$ol1 192.0.2.129/28
+ vlan_create $ul1 222 v$ol1 192.0.2.145/28
+
+ tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+ __simple_if_init g1a v$ol1 192.0.2.65/32
+ ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+ tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1
+ __simple_if_init g1b v$ol1 192.0.2.81/32
+ ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+
+ ip route add vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ ip route add vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+
+ tc qdisc add dev $ul1 clsact
+ tc filter add dev $ul1 egress pref 111 prot 802.1q \
+ flower vlan_id 111 action pass
+ tc filter add dev $ul1 egress pref 222 prot 802.1q \
+ flower vlan_id 222 action pass
+}
+
+sw1_destroy()
+{
+ tc qdisc del dev $ul1 clsact
+
+ ip route del vrf v$ol1 2001:db8:2::/64
+ ip route del vrf v$ol1 192.0.2.16/28
+
+ ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+ __simple_if_fini g1b 192.0.2.81/32
+ tunnel_destroy g1b
+
+ ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+ __simple_if_fini g1a 192.0.2.65/32
+ tunnel_destroy g1a
+
+ vlan_destroy $ul1 222
+ vlan_destroy $ul1 111
+ __simple_if_fini $ul1
+ simple_if_fini $ol1 192.0.2.2/28 2001:db8:1::2/64
+}
+
+sw2_create()
+{
+ simple_if_init $ol2 192.0.2.17/28 2001:db8:2::1/64
+ __simple_if_init $ul2 v$ol2
+ vlan_create $ul2 111 v$ol2 192.0.2.130/28
+ vlan_create $ul2 222 v$ol2 192.0.2.146/28
+
+ tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2
+ __simple_if_init g2a v$ol2 192.0.2.66/32
+ ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+
+ tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2
+ __simple_if_init g2b v$ol2 192.0.2.82/32
+ ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+
+ ip route add vrf v$ol2 192.0.2.0/28 \
+ nexthop dev g2a \
+ nexthop dev g2b
+ ip route add vrf v$ol2 2001:db8:1::/64 \
+ nexthop dev g2a \
+ nexthop dev g2b
+}
+
+sw2_destroy()
+{
+ ip route del vrf v$ol2 2001:db8:1::/64
+ ip route del vrf v$ol2 192.0.2.0/28
+
+ ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+ __simple_if_fini g2b 192.0.2.82/32
+ tunnel_destroy g2b
+
+ ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+ __simple_if_fini g2a 192.0.2.66/32
+ tunnel_destroy g2a
+
+ vlan_destroy $ul2 222
+ vlan_destroy $ul2 111
+ __simple_if_fini $ul2
+ simple_if_fini $ol2 192.0.2.17/28 2001:db8:2::1/64
+}
+
+h2_create()
+{
+ simple_if_init $h2 192.0.2.18/28 2001:db8:2::2/64
+ ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+ ip route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+ ip route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+ ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+ simple_if_fini $h2 192.0.2.18/28 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ ol1=${NETIFS[p2]}
+
+ ul1=${NETIFS[p3]}
+ ul2=${NETIFS[p4]}
+
+ ol2=${NETIFS[p5]}
+ h2=${NETIFS[p6]}
+
+ vrf_prepare
+ h1_create
+ sw1_create
+ sw2_create
+ h2_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ h2_destroy
+ sw2_destroy
+ sw1_destroy
+ h1_destroy
+ vrf_cleanup
+}
+
+multipath4_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ sysctl_set net.ipv4.fib_multipath_hash_policy 1
+ ip route replace vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ ip vrf exec v$h1 \
+ $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \
+ -d 1msec -t udp "sp=1024,dp=0-32768"
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 192.0.2.16/28 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ sysctl_set net.ipv6.fib_multipath_hash_policy 1
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ ip vrf exec v$h1 \
+ $MZ $h1 -6 -q -p 64 -A 2001:db8:1::1 -B 2001:db8:2::2 \
+ -d 1msec -t udp "sp=1024,dp=0-32768"
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+ sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+ local what=$1; shift
+ local weight1=$1; shift
+ local weight2=$1; shift
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a weight $weight1 \
+ nexthop dev g1b weight $weight2
+
+ local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ # Generate 16384 echo requests, each with a random flow label.
+ for ((i=0; i < 16384; ++i)); do
+ ip vrf exec v$h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q &> /dev/null
+ done
+
+ local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+ local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+ local d111=$((t1_111 - t0_111))
+ local d222=$((t1_222 - t0_222))
+ multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+ ip route replace vrf v$ol1 2001:db8:2::/64 \
+ nexthop dev g1a \
+ nexthop dev g1b
+}
+
+ping_ipv4()
+{
+ ping_test $h1 192.0.2.18
+}
+
+ping_ipv6()
+{
+ ping6_test $h1 2001:db8:2::2
+}
+
+multipath_ipv4()
+{
+ log_info "Running IPv4 multipath tests"
+ multipath4_test "ECMP" 1 1
+ multipath4_test "Weighted MP 2:1" 2 1
+ multipath4_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6()
+{
+ log_info "Running IPv6 multipath tests"
+ multipath6_test "ECMP" 1 1
+ multipath6_test "Weighted MP 2:1" 2 1
+ multipath6_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6_l4()
+{
+ log_info "Running IPv6 L4 hash multipath tests"
+ multipath6_l4_test "ECMP" 1 1
+ multipath6_l4_test "Weighted MP 2:1" 2 1
+ multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH net-next 6/6] selftests: forwarding: README: Require diagrams
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: petrm @ 2018-06-26 0:08 UTC (permalink / raw)
ASCII art diagrams are well suited for presenting the topology that a
test uses while being easy to embed directly in the test file iteslf.
They make the information very easy to grasp even for simple topologies,
and for more complex ones they are almost essential, as figuring out the
interconnects from the script itself proves to be difficult.
Therefore state the requirement for topology ASCII art in README.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/README | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README
index 4a0964c42860..b8a2af8fcfb7 100644
--- a/tools/testing/selftests/net/forwarding/README
+++ b/tools/testing/selftests/net/forwarding/README
@@ -46,6 +46,8 @@ Guidelines for Writing Tests
o Where possible, reuse an existing topology for different tests instead
of recreating the same topology.
+o Tests that use anything but the most trivial topologies should include
+ an ASCII art showing the topology.
o Where possible, IPv6 and IPv4 addresses shall conform to RFC 3849 and
RFC 5737, respectively.
o Where possible, tests shall be written so that they can be reused by
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH net-next 6/6] selftests: forwarding: README: Require diagrams
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:08 UTC (permalink / raw)
To: netdev, linux-kselftest; +Cc: davem, shuah
ASCII art diagrams are well suited for presenting the topology that a
test uses while being easy to embed directly in the test file iteslf.
They make the information very easy to grasp even for simple topologies,
and for more complex ones they are almost essential, as figuring out the
interconnects from the script itself proves to be difficult.
Therefore state the requirement for topology ASCII art in README.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
---
tools/testing/selftests/net/forwarding/README | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README
index 4a0964c42860..b8a2af8fcfb7 100644
--- a/tools/testing/selftests/net/forwarding/README
+++ b/tools/testing/selftests/net/forwarding/README
@@ -46,6 +46,8 @@ Guidelines for Writing Tests
o Where possible, reuse an existing topology for different tests instead
of recreating the same topology.
+o Tests that use anything but the most trivial topologies should include
+ an ASCII art showing the topology.
o Where possible, IPv6 and IPv4 addresses shall conform to RFC 3849 and
RFC 5737, respectively.
o Where possible, tests shall be written so that they can be reused by
--
2.4.11
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH net-next 6/6] selftests: forwarding: README: Require diagrams
@ 2018-06-26 0:08 ` Petr Machata
0 siblings, 0 replies; 24+ messages in thread
From: Petr Machata @ 2018-06-26 0:08 UTC (permalink / raw)
ASCII art diagrams are well suited for presenting the topology that a
test uses while being easy to embed directly in the test file iteslf.
They make the information very easy to grasp even for simple topologies,
and for more complex ones they are almost essential, as figuring out the
interconnects from the script itself proves to be difficult.
Therefore state the requirement for topology ASCII art in README.
Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Ido Schimmel <idosch at mellanox.com>
---
tools/testing/selftests/net/forwarding/README | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README
index 4a0964c42860..b8a2af8fcfb7 100644
--- a/tools/testing/selftests/net/forwarding/README
+++ b/tools/testing/selftests/net/forwarding/README
@@ -46,6 +46,8 @@ Guidelines for Writing Tests
o Where possible, reuse an existing topology for different tests instead
of recreating the same topology.
+o Tests that use anything but the most trivial topologies should include
+ an ASCII art showing the topology.
o Where possible, IPv6 and IPv4 addresses shall conform to RFC 3849 and
RFC 5737, respectively.
o Where possible, tests shall be written so that they can be reused by
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH net-next 0/6] Multipath tests for tunnel devices
@ 2018-06-27 1:42 ` David Miller
0 siblings, 0 replies; 24+ messages in thread
From: davem @ 2018-06-27 1:42 UTC (permalink / raw)
From: Petr Machata <petrm at mellanox.com>
Date: Tue, 26 Jun 2018 02:05:51 +0200
> This patchset adds a test for ECMP and weighted ECMP between two GRE
> tunnels.
>
> In patches #1 and #2, the function multipath_eval() is first moved from
> router_multipath.sh to lib.sh for ease of reuse, and then fixed up.
>
> In patch #3, the function tc_rule_stats_get() is parameterized to be
> useful for egress rules as well.
>
> In patch #4, a new function __simple_if_init() is extracted from
> simple_if_init(). This covers the logic that needs to be done for the
> usual interface: VRF migration, upping and installation of IP addresses.
>
> Patch #5 then adds the test itself.
>
> Additionally in patch #6, a requirement to add diagrams to selftests is
> documented.
Looks good, series applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH net-next 0/6] Multipath tests for tunnel devices
@ 2018-06-27 1:42 ` David Miller
0 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2018-06-27 1:42 UTC (permalink / raw)
To: petrm; +Cc: netdev, linux-kselftest, shuah
From: Petr Machata <petrm@mellanox.com>
Date: Tue, 26 Jun 2018 02:05:51 +0200
> This patchset adds a test for ECMP and weighted ECMP between two GRE
> tunnels.
>
> In patches #1 and #2, the function multipath_eval() is first moved from
> router_multipath.sh to lib.sh for ease of reuse, and then fixed up.
>
> In patch #3, the function tc_rule_stats_get() is parameterized to be
> useful for egress rules as well.
>
> In patch #4, a new function __simple_if_init() is extracted from
> simple_if_init(). This covers the logic that needs to be done for the
> usual interface: VRF migration, upping and installation of IP addresses.
>
> Patch #5 then adds the test itself.
>
> Additionally in patch #6, a requirement to add diagrams to selftests is
> documented.
Looks good, series applied.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH net-next 0/6] Multipath tests for tunnel devices
@ 2018-06-27 1:42 ` David Miller
0 siblings, 0 replies; 24+ messages in thread
From: David Miller @ 2018-06-27 1:42 UTC (permalink / raw)
From: Petr Machata <petrm@mellanox.com>
Date: Tue, 26 Jun 2018 02:05:51 +0200
> This patchset adds a test for ECMP and weighted ECMP between two GRE
> tunnels.
>
> In patches #1 and #2, the function multipath_eval() is first moved from
> router_multipath.sh to lib.sh for ease of reuse, and then fixed up.
>
> In patch #3, the function tc_rule_stats_get() is parameterized to be
> useful for egress rules as well.
>
> In patch #4, a new function __simple_if_init() is extracted from
> simple_if_init(). This covers the logic that needs to be done for the
> usual interface: VRF migration, upping and installation of IP addresses.
>
> Patch #5 then adds the test itself.
>
> Additionally in patch #6, a requirement to add diagrams to selftests is
> documented.
Looks good, series applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread