* [meta-openembedded][PATCH v3 7/7] ibus-table-chinese: add ibus-table-chinese recipe
2018-12-01 19:59 [meta-openembedded][PATCH v3 0/7] add ibus with anthy, pinyin and table support Pablo Saavedra
` (5 preceding siblings ...)
2018-12-01 19:59 ` [meta-openembedded][PATCH v3 6/7] ibus-table: add ibus-table recipe Pablo Saavedra
@ 2018-12-01 19:59 ` Pablo Saavedra
6 siblings, 0 replies; 11+ messages in thread
From: Pablo Saavedra @ 2018-12-01 19:59 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
---
.../0001-revert-CMakeLists.txt.patch | 204 ++
.../ibus/ibus-table-chinese/0002-add-Modules.patch | 2933 ++++++++++++++++++++
.../0003-add-ChangeLog.prev.patch | 58 +
.../0005-fix-cmake-cross-compile.patch | 130 +
.../ibus/ibus-table-chinese_1.8.2.bb | 82 +
5 files changed, 3407 insertions(+)
create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch
create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch
create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch
create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch
create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb
diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch
new file mode 100644
index 000000000..d677dc49a
--- /dev/null
+++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch
@@ -0,0 +1,204 @@
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -1,17 +1,20 @@
+ cmake_minimum_required(VERSION 2.6.2)
+
+-# Included scripts do automatic cmake_policy PUSH and POP.
+-# OLD: CMake policy in included script will affect the invoker.
+-# CMAKE_POLICY(SET CMP0011 OLD)
++# CMP0011 should be set here, otherwise policy set in module won't affect
++# here.
++CMAKE_POLICY(SET CMP0011 OLD)
+
+ # Default CMAKE_INSTALL_PREFIX should be set before PROJECT()
+ SET(CMAKE_INSTALL_PREFIX "/usr" CACHE PATH "Install dir prefix")
+
+ # Whether to build on fedora
+-SET(CMAKE_FEDORA_ENABLE_FEDORA_BUILD "1" CACHE STRING "Enable fedora build")
++SET(CMAKE_FEDORA_ENABLE_FEDORA_BUILD "0" CACHE STRING "Enable fedora build")
+
+-# Message level INFO1 (5)
+-SET(MANAGE_MESSAGE_LEVEL 5 CACHE STRING "Message (Verbose) Level")
++# Message level M_OFF (4)
++SET(MANAGE_MESSAGE_LEVEL 4 CACHE STRING "Message (Verbose) Level")
++
++# Default support Gnome shell
++SET(GNOME_SHELL 1)
+
+ ####################################################################
+ # Project specific information
+@@ -19,34 +22,20 @@
+ PROJECT(ibus-table-chinese NONE)
+ SET(PRJ_SUMMARY "Chinese input tables for IBus")
+
+-SET(SUMMARY_TRANSLATIONS
+- "zh_CN" "中文码表输入法"
+- "zh_TW" "中文碼表輸入法"
+- )
+-
+ SET(PRJ_DESCRIPTION
+ "ibus-table-chinese is provides the infrastructure for Chinese input methods.
+ Input tables themselves are in subpackages."
+ )
+
+-SET(DESCRIPTION_TRANSLATIONS
+- "zh_TW" "ibus-table-chinese 提供了中文碼表輸入法的基礎架構。
+- 輸入法本身則在子套件裡。"
+- )
+-
+ SET(AUTHORS "Yuwei Yu, Caius 'kaio' Chance, Ding-Yi Chen")
+ SET(MAINTAINER "Ding-Yi Chen <dchen@redhat.com>")
+ SET(VENDOR "Red Hat, Inc")
+ SET(LICENSE "GPLv3+")
+-SET(PRJ_GROUP "System Environment/Libraries")
+-SET(BUILD_ARCH "noarch")
+-SET(RPM_SPEC_URL "http://code.google.com/p/ibus/")
+-SET(RPM_SPEC_SOURCES "https://fedorahosted.org/releases/c/m/%{name}/%{name}-%{version}-Source.tar.gz")
+
+ ####################################################################
+ # Includes
+ #
+-LIST(INSERT CMAKE_MODULE_PATH 0 ${CMAKE_SOURCE_DIR}/Modules)
++SET(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/Modules ${CMAKE_ROOT}/Modules )
+
+ # Create a link if Modules/ does not exists
+ IF(EXISTS ${CMAKE_SOURCE_DIR}/cmake-fedora/Modules)
+@@ -63,6 +52,7 @@
+ SET(LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Library dir")
+ ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES "64")
+ SET(LIBEXEC_DIR "${LIB_DIR}" CACHE PATH "LIBEXEC dir")
++ MESSAGE("*Hi")
+ ENDIF(NOT CMAKE_FEDORA_ENABLE_FEDORA_BUILD)
+
+ INCLUDE(ManageEnvironment RESULT_VARIABLE MANAGE_ENVIRONMENT_PATH)
+@@ -77,56 +67,82 @@
+
+ INCLUDE(ManageVersion)
+ RELEASE_NOTES_READ_FILE()
+-INCLUDE(ManageArchive)
+-INCLUDE(ManageFile)
+-INCLUDE(ManageSourceVersionControl)
+-INCLUDE(ManageTarget)
+-INCLUDE(ManageTranslation)
+ INCLUDE(ManageUninstall)
+-ENABLE_TESTING()
+
+ ####################################################################
+-# Dependencies
++# Required
+ #
+
+-INCLUDE(ManageDependency)
+-## Requires
+-MANAGE_DEPENDENCY(REQUIRES IBUS-TABLE VER "1.2.0" REQUIRED)
+-
+-## Build Requires
+-MANAGE_DEPENDENCY(BUILD_REQUIRES CMAKE VER "2.6.2" REQUIRED)
+-MANAGE_DEPENDENCY(BUILD_REQUIRES IBUS-TABLE VER "1.2.0" REQUIRED DEVEL)
+-PRJ_INFO_CMAKE_APPEND(${PRJ_INFO_CMAKE} REQUIRES)
+-PRJ_INFO_CMAKE_APPEND(${PRJ_INFO_CMAKE} BUILD_REQUIRES)
++FIND_PACKAGE(PkgConfig)
++PKG_CHECK_MODULES(IBUS_TABLE REQUIRED ibus-table>=1.2)
+
+ ####################################################################
+ # Building
+ #
++
+ ADD_SUBDIRECTORY(tables)
+
+ ####################################################################
+ # Installing
+ #
+
+-MANAGE_SOURCE_VERSION_CONTROL_GIT()
++# Install docs
++# Note: Need to use filename only, otherwise
++# ${CMAKE_SOURCE_DIR}/RELEASE-NOTES.txt will be deleted in spec
++#
++
++GET_FILENAME_COMPONENT(_releaseFileName "${RELEASE_FILE}" NAME)
++SET(INSTALL_DOCS ${_releaseFileName} AUTHORS README ChangeLog COPYING README)
++STRING_JOIN(PRJ_DOC_LIST " " ${INSTALL_DOCS})
++
++INSTALL(FILES ${INSTALL_DOCS}
++ DESTINATION "${PRJ_DOC_DIR}")
+
+-INSTALL(FILES AUTHORS README ChangeLog COPYING DESTINATION ${PRJ_DOC_DIR})
++####################################################################
++# Source Version Control
++#
++INCLUDE(ManageSourceVersionControl)
++MANAGE_SOURCE_VERSION_CONTROL_GIT()
+
+ ####################################################################
+ # Packing
+ #
++INCLUDE(ManageArchive)
+
+-## Pack Source
+-SET(SOURCE_ARCHIVE_DIR ${CMAKE_BINARY_DIR}/SOURCES CACHE PATH "Source Archive Dir")
+-PACK_SOURCE_ARCHIVE("${SOURCE_ARCHIVE_DIR}"
+- GITIGNORE ${CMAKE_SOURCE_DIR}/.gitignore
++IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD)
++ INCLUDE(ManageRPM)
++ INCLUDE(ManageReleaseFedora)
++ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD)
++INCLUDE(ManageRelease)
++
++SET(PRJ_IGNORE_FILES_COMMON
++ "/doc/" "\\\\.spec$" "messages.po$" "\\\\.orig$" "/cmake-fedora/"
++ "/\\\\.cache/"
++ "\\\\.db$"
++ )
++
++LIST(APPEND PRJ_IGNORE_FILES_COMMON
++ "\\\\.utf8$" "\\\\.tmp$" "\\\\.freq$" "\\\\.tab$"
++ "tables/array/.*\\\\.head$"
++ "array30.txt" "array30-big.txt" "wubi-haifeng86.txt"
+ )
+
+-## Pack RPM
++LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES
++ ${PRJ_IGNORE_FILES_COMMON} "/bin/" "\\\\.xml$" "\\\\.schemas")
++
++IF(RPM_BUILD_SOURCES)
++ SET(SOURCE_ARCHIVE_DIR ${RPM_BUILD_SOURCES})
++ELSE(RPM_BUILD_SOURCES)
++ SET(SOURCE_ARCHIVE_DIR ${CMAKE_BINARY_DIR}/SOURCES)
++ENDIF(RPM_BUILD_SOURCES)
++
++PACK_SOURCE_ARCHIVE("${SOURCE_ARCHIVE_DIR}")
+ IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD)
+- SET(RPM_BUILD_SOURCES ${SOURCE_ARCHIVE_DIR})
+- INCLUDE(ManageRPM)
+- PACK_RPM(SPEC_IN "SPECS/project.spec.in")
++ PACK_RPM()
++ RELEASE_FEDORA(fedora el6)
++ # "Off" Warning is displayed if mock is not installed.
++ RPM_MOCK_BUILD()
++ MANAGE_RELEASE(release_fedora)
+ ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD)
+
+ ####################################################################
+@@ -142,20 +158,10 @@
+ #MANAGE_UPLOAD_CMD(scp src UPLOAD_FILES ${SOURCE_ARCHIVE_FILE})
+ #ADD_DEPENDENCIES(upload upload_src)
+
+-INCLUDE(ManageRelease)
+-IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD)
+- INCLUDE(ManageReleaseFedora)
+- RELEASE_FEDORA(fedora el6)
+- # "Off" Warning is displayed if mock is not installed.
+- MANAGE_RELEASE(tag_push release_fedora)
+-ELSE(CMAKE_FEDORA_ENABLE_FEDORA_BUILD)
+- MANAGE_RELEASE(tag_push)
+-ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD)
+-
+-
+ ####################################################################
+ # Test Suites.
+ #
++#ENABLE_TESTING()
+ #ADD_TEST("Test" test_cmd1)
+
+
diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch
new file mode 100644
index 000000000..ffacda683
--- /dev/null
+++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch
@@ -0,0 +1,2933 @@
+--- /dev/null
++++ b/Modules/DateTimeFormat.cmake
+@@ -0,0 +1,37 @@
++# - Date/time format module.
++#
++# Included by:
++# ManageVersion
++#
++# Defines the following macros:
++# TODAY(date_var format [locale])
++# - Get date of today in specified format and locale.
++# * Parameters:
++# date_var: Result date string
++# format: date format for date(1)
++# locale: locale of the string. Use current locale setting if
++# locale is not given.
++#
++# Provides the following variables:
++# TODAY_CHANGELOG: Today in the format that is used in RPM Changelog.
++# e.g. Wed 08 Aug 2010
++#
++# TODAY_SHORT: Short presentation of today, e.g. 20100818.
++#
++
++IF(NOT DEFINED _DATE_TIME_FORMAT_CMAKE_)
++ SET(_DATE_TIME_FORMAT_CMAKE_ "DEFINED")
++
++ MACRO(TODAY date_var format)
++ INCLUDE(ManageVariable)
++ SET(_locale ${ARGV2})
++ IF(_locale)
++ SET(ENV{LC_ALL} ${_locale})
++ ENDIF(_locale)
++ COMMAND_OUTPUT_TO_VARIABLE(${date_var} date --utc "${format}")
++ ENDMACRO(TODAY date_var format)
++
++ TODAY(TODAY_CHANGELOG "+%a %b %d %Y" "C")
++ TODAY(TODAY_SHORT "+%Y%m%d" "C")
++ENDIF(NOT DEFINED _DATE_TIME_FORMAT_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageAPIDoc.cmake
+@@ -0,0 +1,50 @@
++# - Mage generated API documents
++# This module is for API document generation, such as doxygen.
++# Defines following macros:
++# MANAGE_APIDOC_DOXYGEN(doxygen_in doc_dir)
++# - This macro generate documents according to doxygen template.
++# Arguments:
++# + doxygen_in: Doxygen template file.
++# + doc_dir: Document source directory to be copied from.
++# Reads following variable:
++# + PRJ_DOC_DIR: Directory for document
++#
++#
++IF(NOT DEFINED _MANAGE_APIDOC_CMAKE_)
++ SET(_MANAGE_APIDOC_CMAKE_ "DEFINED")
++ INCLUDE(ManageMessage)
++
++ MACRO(MANAGE_APIDOC_DOXYGEN doxygen_in doc_dir)
++ SET(SOURCE_ARCHIVE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES} "/Doxyfile$")
++ SET(_manage_apidoc_doxygen_dependency_missing 0)
++ IF(NOT PRJ_DOC_DIR)
++ M_MSG(${M_OFF} "PRJ_DOC_DIR undefined. Doxygen support disabled.")
++ SET(_manage_apidoc_doxygen_dependency_missing 1)
++ ENDIF(NOT PRJ_DOC_DIR)
++
++ FIND_PACKAGE(doxygen)
++ IF(NOT PACKAGE_FOUND_NAME)
++ M_MSG(${M_OFF} "Package doxygen not found. Doxygen support disabled.")
++ SET(_manage_apidoc_doxygen_dependency_missing 1)
++ ENDIF(NOT PACKAGE_FOUND_NAME)
++
++ FIND_PROGRAM(DOXYGEN_CMD doxygen)
++ IF(DOXYGEN_CMD STREQUAL "DOXYGEN_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program doxygen not found. Doxygen support disabled.")
++ SET(_manage_apidoc_doxygen_dependency_missing 1)
++ ENDIF(DOXYGEN_CMD STREQUAL "DOXYGEN_CMD-NOTFOUND")
++
++ IF(NOT _manage_apidoc_doxygen_dependency_missing)
++ CONFIGURE_FILE(${doxygen_in} Doxyfile)
++
++ ADD_CUSTOM_TARGET(doxygen
++ COMMAND "${DOXYGEN_CMD}" "Doxyfile"
++ )
++
++ INSTALL(DIRECTORY ${doc_dir}
++ DESTINATION "${PRJ_DOC_DIR}"
++ )
++ ENDIF(NOT _manage_apidoc_doxygen_dependency_missing)
++ ENDMACRO(MANAGE_APIDOC_DOXYGEN doxygen_template)
++ENDIF(NOT DEFINED _MANAGE_APIDOC_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageArchive.cmake
+@@ -0,0 +1,179 @@
++# - Pack source helper module
++# By default CPack pack everything under the source directory, this is usually
++# undesirable. We avoid this by using the sane default ignore list.
++#
++# Includes:
++# ManageVersion
++# CPack
++#
++# Included by:
++# ManageRPM
++#
++# Read and Defines following variable:
++# SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT: Default list of file patterns
++# that are normally exclude from the source package.
++# Override it by setting it before INCLUDE(ManageArchive).
++# Defines following target:
++# pack_remove_old: Remove old source package files.
++# Defines following macro:
++# SOURCE_ARCHIVE(outputDir [generator])
++# - Pack source files as <projectName>-<PRJ_VER>-Source.<packFormat>,
++# Arguments:
++# + outputDir: Directory to write source archive.
++# + generator: (Optional) Method to make archive. Basically this argument
++# is passed as CPACK_GENERATOR. Default to TGZ.
++# Read following variables:
++# + PROJECT_NAME: Project name
++# + VENDOR: Organization that issue this project.
++# + PRJ_VER: Project version
++# + PRJ_SUMMARY: (Optional) Project summary
++# + SOURCE_ARCHIVE_IGNORE_FILES: A list of regex filename pattern
++# that should be excluded from source archive file.
++# (SOURCE_ARCHIVE_IGNORE_FILE_CMAKE) is already in this list.
++# Define following variables:
++# + SOURCE_ARCHIVE_CONTENTS: List of files to be packed to archive.
++# + SOURCE_ARCHIVE_FILE_EXTENSION: File extension of the source package
++# files.
++# + SOURCE_ARCHIVE_NAME: Name of source archive (without path)
++# + SOURCE_ARCHIVE_FILE: Path to source archive file
++# Target:
++# + pack_src: Pack source files like package_source.
++# + clean_pack_src: Remove all source archives.
++# + clean_old_pack_src: Remove all old source package.
++#
++#
++IF(NOT DEFINED _MANAGE_ARCHIVE_CMAKE_)
++ SET (_MANAGE_ARCHIVE_CMAKE_ "DEFINED")
++ SET(SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT
++ "/\\\\.svn/" "/CVS/" "/\\\\.git/" "\\\\.gitignore$" "/\\\\.hg/"
++ "/\\\\.hgignore$"
++ "~$" "\\\\.swp$" "\\\\.log$" "\\\\.bak$" "\\\\.old$"
++ "\\\\.gmo$" "\\\\.cache$"
++ "\\\\.tar.gz$" "\\\\.tar.bz2$" "/src/config\\\\.h$" "NO_PACK")
++
++ SET(SOURCE_ARCHIVE_IGNORE_FILES_CMAKE "/CMakeFiles/" "_CPack_Packages/" "/Testing/"
++ "\\\\.directory$" "CMakeCache\\\\.txt$"
++ "/install_manifest.txt$"
++ "/cmake_install\\\\.cmake$" "/cmake_uninstall\\\\.cmake$""/CPack.*\\\\.cmake$" "/CTestTestfile\\\\.cmake$"
++ "Makefile$" "/${PROJECT_NAME}-${PRJ_VER}-SOURCE/"
++ )
++
++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT} ${SOURCE_ARCHIVE_IGNORE_FILES_CMAKE})
++
++ INCLUDE(ManageVersion)
++
++ # Internal: SOURCE_ARCHIVE_GET_CONTENTS()
++ # - Return all source file to be packed.
++ # This is called by SOURCE_ARCHIVE(),
++ # So no need to call it again.
++ FUNCTION(SOURCE_ARCHIVE_GET_CONTENTS )
++ SET(_fileList "")
++ FILE(GLOB_RECURSE _ls "*")
++ STRING(REPLACE "\\\\" "\\" _ignore_files "${SOURCE_ARCHIVE_IGNORE_FILES}")
++ FOREACH(_file ${_ls})
++ SET(_matched 0)
++ FOREACH(filePattern ${_ignore_files})
++ M_MSG(${M_INFO3} "_file=${_file} filePattern=${filePattern}")
++ IF(_file MATCHES "${filePattern}")
++ SET(_matched 1)
++ BREAK()
++ ENDIF(_file MATCHES "${filePattern}")
++ ENDFOREACH(filePattern ${_ignore_files})
++ IF(NOT _matched)
++ FILE(RELATIVE_PATH _file ${CMAKE_SOURCE_DIR} "${_file}")
++ LIST(APPEND _fileList "${_file}")
++ ENDIF(NOT _matched)
++ ENDFOREACH(_file ${_ls})
++ SET(SOURCE_ARCHIVE_CONTENTS ${_fileList} CACHE STRING "Source archive file list" FORCE)
++ M_MSG(${M_INFO2} "SOURCE_ARCHIVE_CONTENTS=${SOURCE_ARCHIVE_CONTENTS}")
++ ENDFUNCTION(SOURCE_ARCHIVE_GET_CONTENTS var)
++
++ MACRO(PACK_SOURCE_ARCHIVE outputDir)
++ IF(PRJ_VER STREQUAL "")
++ M_MSG(${M_FATAL} "PRJ_VER not defined")
++ ENDIF(PRJ_VER STREQUAL "")
++ IF(${ARGV2})
++ SET(CPACK_GENERATOR "${ARGV2}")
++ ELSE(${ARGV2})
++ SET(CPACK_GENERATOR "TGZ")
++ ENDIF(${ARGV2})
++ SET(CPACK_SOURCE_GENERATOR ${CPACK_GENERATOR})
++ IF(${CPACK_GENERATOR} STREQUAL "TGZ")
++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "tar.gz")
++ ELSEIF(${CPACK_GENERATOR} STREQUAL "TBZ2")
++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "tar.bz2")
++ ELSEIF(${CPACK_GENERATOR} STREQUAL "ZIP")
++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "zip")
++ ENDIF(${CPACK_GENERATOR} STREQUAL "TGZ")
++
++ SET(CPACK_SOURCE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES})
++ SET(CPACK_PACKAGE_VERSION ${PRJ_VER})
++
++ IF(EXISTS ${CMAKE_SOURCE_DIR}/COPYING)
++ SET(CPACK_RESOURCE_FILE_LICENSE ${CMAKE_SOURCE_DIR}/README)
++ ENDIF(EXISTS ${CMAKE_SOURCE_DIR}/COPYING)
++
++ IF(EXISTS ${CMAKE_SOURCE_DIR}/README)
++ SET(CPACK_PACKAGE_DESCRIPTION_FILE ${CMAKE_SOURCE_DIR}/README)
++ ENDIF(EXISTS ${CMAKE_SOURCE_DIR}/README)
++
++ IF(DEFINED PRJ_SUMMARY)
++ SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "${PRJ_SUMMARY}")
++ ENDIF(DEFINED PRJ_SUMMARY)
++
++ SET(CPACK_SOURCE_PACKAGE_FILE_NAME "${PROJECT_NAME}-${PRJ_VER}-Source")
++ SET(SOURCE_ARCHIVE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}.${SOURCE_ARCHIVE_FILE_EXTENSION}" CACHE STRING "Source archive name" FORCE)
++ SET(SOURCE_ARCHIVE_FILE "${outputDir}/${SOURCE_ARCHIVE_NAME}" CACHE FILEPATH "Source archive file" FORCE)
++
++ SET(CPACK_PACKAGE_VENDOR "${VENDOR}")
++ SOURCE_ARCHIVE_GET_CONTENTS()
++
++ SET(SOURCE_ARCHIVE_CONTENTS_ABSOLUTE "")
++ FOREACH(_file ${SOURCE_ARCHIVE_CONTENTS})
++ LIST(APPEND SOURCE_ARCHIVE_CONTENTS_ABSOLUTE "${CMAKE_HOME_DIRECTORY}/${_file}")
++ ENDFOREACH(_file ${SOURCE_ARCHIVE_CONTENTS})
++
++ INCLUDE(CPack)
++
++ # Get relative path of outputDir
++ FILE(RELATIVE_PATH _outputDir_rel ${CMAKE_BINARY_DIR} ${outputDir})
++ #MESSAGE("#_outputDir_rel=${_outputDir_rel}")
++
++ IF("${_outputDir_rel}" STREQUAL ".")
++ ADD_CUSTOM_TARGET_COMMAND(pack_src
++ OUTPUT "${SOURCE_ARCHIVE_FILE}"
++ COMMAND make package_source
++ DEPENDS ${SOURCE_ARCHIVE_CONTENTS}
++ COMMENT "Packing the source as: ${SOURCE_ARCHIVE_FILE}"
++ )
++ ELSE("${_outputDir_rel}" STREQUAL ".")
++ FILE(MAKE_DIRECTORY ${outputDir})
++ ADD_CUSTOM_TARGET_COMMAND(pack_src
++ OUTPUT "${SOURCE_ARCHIVE_FILE}"
++ COMMAND make package_source
++ COMMAND cmake -E copy "${SOURCE_ARCHIVE_NAME}" "${outputDir}"
++ COMMAND cmake -E remove ${SOURCE_ARCHIVE_NAME}
++ DEPENDS ${SOURCE_ARCHIVE_CONTENTS_ABSOLUTE}
++ COMMENT "Packing the source as: ${SOURCE_ARCHIVE_FILE}"
++ )
++ ENDIF("${_outputDir_rel}" STREQUAL ".")
++
++ ADD_CUSTOM_TARGET(clean_old_pack_src
++ COMMAND find .
++ -name '${PROJECT_NAME}*.${SOURCE_ARCHIVE_FILE_EXTENSION}' ! -name '${PROJECT_NAME}-${PRJ_VER}-*.${SOURCE_ARCHIVE_FILE_EXTENSION}'
++ -print -delete
++ COMMENT "Cleaning old source archives"
++ )
++
++ ADD_DEPENDENCIES(clean_old_pack_src changelog )
++
++ ADD_CUSTOM_TARGET(clean_pack_src
++ COMMAND find .
++ -name '${PROJECT_NAME}*.${SOURCE_ARCHIVE_FILE_EXTENSION}'
++ -print -delete
++ COMMENT "Cleaning all source archives"
++ )
++ ENDMACRO(PACK_SOURCE_ARCHIVE outputDir)
++
++ENDIF(NOT DEFINED _MANAGE_ARCHIVE_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageEnvironment.cmake
+@@ -0,0 +1,190 @@
++# - Manage build environment such as environment variables and compile flags.
++# This module predefine various environment variables, cmake policies, and
++# compile flags.
++#
++# The setting can be viewed and modified by ccmake.
++#
++# List of frequently used variable and compile flags:
++# + CMAKE_INSTALL_PREFIX: Compile flag whose value is ${CMAKE_INSTALL_PREFIX}.
++# + BIN_DIR: Directory for executable.
++# Default: ${CMAKE_INSTALL_PREFIX}/bin
++# + DATA_DIR: Directory for architecture independent data files.
++# Default: ${CMAKE_INSTALL_PREFIX}/share
++# + DOC_DIR: Directory for documentation
++# Default: ${DATA_DIR}/doc
++# + SYSCONF_DIR: System wide configuration files.
++# Default: /etc
++# + LIB_DIR: System wide library path.
++# Default: ${CMAKE_INSTALL_PREFIX}/lib for 32 bit,
++# ${CMAKE_INSTALL_PREFIX}/lib64 for 64 bit.
++# + LIBEXEC_DIR: Executables that are not meant to be executed by user directly.
++# Default: ${CMAKE_INSTALL_PREFIX}/libexec
++# + PROJECT_NAME: Project name
++#
++# Defines following macros:
++# SET_COMPILE_ENV(var default_value [ENV_NAME env_name]
++# [CACHE type docstring [FORCE]])
++# - Ensure a variable is set to nonempty value, then add the variable and value to
++# compiling definition.
++# The value is determined by following order:
++# 1. Value of var if var is defined.
++# 2. Environment variable with the same name (or specified via ENV_NAME)
++# 3. Parameter default_value
++# Parameters:
++# + var: Variable to be set
++# + default_value: Default value of the var
++# + env_name: (Optional)The name of environment variable.
++# Only need if different from var.
++# + CACHE type docstring [FORCE]:
++# Same with "SET" command.
++#
++# SET_USUAL_COMPILE_ENVS()
++# - Set the most often used variable and compile flags.
++# It defines compile flags according to the values of corresponding variables,
++# usually under the same or similar name.
++# If a corresponding variable is not defined yet, then a default value is assigned
++# to that variable, then define the flag.
++#
++# Defines following flags according to the variable with same name.
++# + CMAKE_INSTALL_PREFIX: Compile flag whose value is ${CMAKE_INSTALL_PREFIX}.
++# + BIN_DIR: Directory for executable.
++# Default: ${CMAKE_INSTALL_PREFIX}/bin
++# + DATA_DIR: Directory for architecture independent data files.
++# Default: ${CMAKE_INSTALL_PREFIX}/share
++# + DOC_DIR: Directory for documentation
++# Default: ${DATA_DIR}/doc
++# + SYSCONF_DIR: System wide configuration files.
++# Default: /etc
++# + LIB_DIR: System wide library path.
++# Default: ${CMAKE_INSTALL_PREFIX}/lib for 32 bit,
++# ${CMAKE_INSTALL_PREFIX}/lib64 for 64 bit.
++# + LIBEXEC_DIR: Executables that are not meant to be executed by user directly.
++# Default: ${CMAKE_INSTALL_PREFIX}/libexec
++# + PROJECT_NAME: Project name
++# + PRJ_VER: Project version
++# + PRJ_DATA_DIR: Data directory for the project.
++# Default: ${DATA_DIR}/${PROJECT_NAME}
++# + PRJ_DOC_DIR: DocuFILEPATH = File chooser dialog.
++# Default: ${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER}
++
++IF(NOT DEFINED _MANAGE_ENVIRONMENT_CMAKE_)
++ SET(_MANAGE_ENVIRONMENT_CMAKE_ "DEFINED")
++ SET(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
++ CMAKE_POLICY(VERSION 2.6.2)
++
++ MACRO(SET_COMPILE_ENV var default_value)
++ SET(_stage "")
++ SET(_env "${var}")
++ SET(_setOpts "")
++ SET(_force 0)
++ FOREACH(_arg ${ARGN})
++ IF(_arg STREQUAL "ENV_NAME")
++ SET(_stage "ENV_NAME")
++ ELSEIF(_arg STREQUAL "CACHE")
++ SET(_stage "_CACHE")
++ ELSE(_arg STREQUAL "ENV_NAME")
++ IF(_stage STREQUAL "ENV_NAME")
++ SET(_env "${_arg}")
++ ELSEIF(_stage STREQUAL "_CACHE")
++ LIST(APPEND _setOpts "${_arg}")
++ IF(_arg STREQUAL "FORCE")
++ SET(_force 1)
++ ENDIF(_arg STREQUAL "FORCE")
++ ENDIF(_stage STREQUAL "ENV_NAME")
++ ENDIF(_arg STREQUAL "ENV_NAME")
++ ENDFOREACH(_arg ${ARGN})
++
++ IF(NOT "${_setOpts}" STREQUAL "")
++ LIST(INSERT _setOpts 0 "CACHE")
++ ENDIF(NOT "${_setOpts}" STREQUAL "")
++
++ # Set the variable
++ IF(_force)
++ IF(NOT "$ENV{${_env}}" STREQUAL "")
++ SET(${var} "$ENV{${_env}}" ${_setOpts})
++ ELSE(NOT "$ENV{${_env}}" STREQUAL "")
++ SET(${var} "${default_value}" ${_setOpts})
++ ENDIF(NOT "$ENV{${_env}}" STREQUAL "")
++ ELSE(_force)
++ IF(NOT "${${var}}" STREQUAL "")
++ SET(${var} "${${var}}" ${_setOpts})
++ ELSEIF(NOT "$ENV{${_env}}" STREQUAL "")
++ SET(${var} "$ENV{${_env}}" ${_setOpts})
++ ELSE(NOT "${${var}}" STREQUAL "")
++ # Default value
++ SET(${var} "${default_value}" ${_setOpts})
++ ENDIF(NOT "${${var}}" STREQUAL "")
++ ENDIF(_force)
++
++ # Enforce CMP0005 to new, yet pop after ADD_DEFINITION
++ CMAKE_POLICY(PUSH)
++ CMAKE_POLICY(SET CMP0005 NEW)
++ ADD_DEFINITIONS(-D${_env}=${${var}})
++ CMAKE_POLICY(POP)
++ M_MSG(${M_INFO2} "SET(${var} ${${var}})")
++ ENDMACRO(SET_COMPILE_ENV var default_value)
++
++ MACRO(MANAGE_CMAKE_POLICY policyName defaultValue)
++ IF(POLICY ${policyName})
++ CMAKE_POLICY(GET "${policyName}" _cmake_policy_value)
++ IF(_cmake_policy_value STREQUAL "")
++ # Policy not defined yet
++ CMAKE_POLICY(SET "${policyName}" "${defaultValue}")
++ ENDIF(_cmake_policy_value STREQUAL "")
++ ENDIF(POLICY ${policyName})
++ ENDMACRO(MANAGE_CMAKE_POLICY policyName defaultValue)
++
++ ####################################################################
++ # Recommended policy setting
++ #
++ # CMP0005: Preprocessor definition values are now escaped automatically.
++ # OLD:Preprocessor definition values are not escaped.
++ MANAGE_CMAKE_POLICY(CMP0005 NEW)
++
++ # CMP0009: FILE GLOB_RECURSE calls should not follow symlinks by default.
++ # OLD: FILE GLOB_RECURSE calls follow symlinks
++ MANAGE_CMAKE_POLICY(CMP0009 NEW)
++
++ # CMP0017: Prefer files from the CMake module directory when including from there.
++ # OLD: Prefer files from CMAKE_MODULE_PATH regardless
++ MANAGE_CMAKE_POLICY(CMP0017 NEW)
++
++ # Include should be put after the cmake policy
++ INCLUDE(ManageMessage)
++ M_MSG(${M_INFO1} "CMAKE_HOST_SYSTEM=${CMAKE_HOST_SYSTEM}")
++ M_MSG(${M_INFO1} "CMAKE_SYSTEM=${CMAKE_SYSTEM}")
++
++ ####################################################################
++ # CMake Variables
++ #
++ SET_COMPILE_ENV(BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin"
++ CACHE PATH "Binary dir")
++ SET_COMPILE_ENV(DATA_DIR "${CMAKE_INSTALL_PREFIX}/share"
++ CACHE PATH "Data dir")
++ SET_COMPILE_ENV(DOC_DIR "${DATA_DIR}/doc"
++ CACHE PATH "Documentation dir")
++ SET_COMPILE_ENV(SYSCONF_DIR "/etc"
++ CACHE PATH "System configuration dir")
++ SET_COMPILE_ENV(LIBEXEC_DIR "${CMAKE_INSTALL_PREFIX}/libexec"
++ CACHE PATH "LIBEXEC dir")
++
++ IF(CMAKE_SYSTEM_PROCESSOR MATCHES "64")
++ SET_COMPILE_ENV(IS_64 "64" CACHE STRING "IS_64")
++ ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES "64")
++
++ SET_COMPILE_ENV(LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib${IS_64}"
++ CACHE PATH "Library dir")
++
++ SET_COMPILE_ENV(PROJECT_NAME "${PROJECT_NAME}")
++ SET_COMPILE_ENV(PRJ_DATA_DIR "${DATA_DIR}/${PROJECT_NAME}")
++
++ # Directory to store cmake-fedora specific temporary files.
++ IF(NOT CMAKE_FEDORA_TMP_DIR)
++ SET(CMAKE_FEDORA_TMP_DIR "${CMAKE_BINARY_DIR}/NO_PACK")
++ ENDIF(NOT CMAKE_FEDORA_TMP_DIR)
++
++ ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_FEDORA_TMP_DIR}
++ COMMAND cmake -E make_directory ${CMAKE_FEDORA_TMP_DIR}
++ COMMENT "Create CMAKE_FEDORA_TMP_DIR"
++ )
++ENDIF(NOT DEFINED _MANAGE_ENVIRONMENT_CMAKE_)
+--- /dev/null
++++ b/Modules/ManageGConf.cmake
+@@ -0,0 +1,67 @@
++# - GConf relative targets such as install/unstall schemas.
++# This module finds gconftool-2 or gconftool for GConf manipulation.
++#
++# Reads following variables:
++# GCONF_SCHEMAS_FILE: Schema file.
++# Default: "${PROJECT_NAME}.schemas"
++#
++# GCONF_SCHEMAS_INSTALLED_DIR: Direct of installed schemas files.
++# Default: "${SYSCONF_INSTALL_DIR}/gconf/schemas"
++#
++# GCONF_CONFIG_SOURCE: configuration source.
++# Default: "" (Use the system default)
++#
++# Defines following targets:
++# install_schemas: install schemas
++#
++# uninstall_schemas: uninstall schemas
++#
++
++IF(NOT DEFINED _MANAGE_GCONF_CMAKE_)
++ FIND_PROGRAM(GCONFTOOL_CMD NAMES gconftool-2 gconftool)
++
++ IF(${GCONFTOOL_CMD} STREQUAL "GCONFTOOL_CMD-NOTFOUND")
++ MESSAGE(FATAL_ERROR "gconftool and gconftool-2 are not found, please install GConf or GConf2.")
++ ENDIF()
++
++ IF (NOT DEFINED GCONF_SCHEMAS_FILE)
++ SET(GCONF_SCHEMAS_FILE "${PROJECT_NAME}.schemas")
++ ENDIF(NOT DEFINED GCONF_SCHEMAS_FILE)
++
++ GET_FILENAME_COMPONENT(_gconf_schemas_basename ${GCONF_SCHEMAS_FILE} NAME)
++
++ IF (NOT DEFINED GCONF_SCHEMAS_INSTALLED_DIR)
++ IF(SYSCONF_INSTALL_DIR)
++ SET(GCONF_SCHEMAS_INSTALLED_DIR "${SYSCONF_INSTALL_DIR}/gconf/schemas")
++ ELSE(SYSCONF_INSTALL_DIR)
++ SET(GCONF_SCHEMAS_INSTALLED_DIR "${SYSCONF_DIR}/gconf/schemas")
++ ENDIF(SYSCONF_INSTALL_DIR)
++ ENDIF(NOT DEFINED GCONF_SCHEMAS_INSTALLED_DIR)
++
++ IF (NOT DEFINED GCONF_CONFIG_SOURCE)
++ SET(GCONF_CONFIG_SOURCE "")
++ ENDIF(NOT DEFINED GCONF_CONFIG_SOURCE)
++ SET(ENV{GCONF_CONFIG_SOURCE} ${GCONF_CONFIG_SOURCE})
++
++
++ ADD_CUSTOM_TARGET(uninstall_schemas
++ COMMAND GCONF_CONFIG_SOURCE=${GCONF_CONFIG_SOURCE}
++ ${GCONFTOOL_CMD} --makefile-uninstall-rule
++ ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename}
++ COMMENT "Uninstalling schemas"
++ )
++
++ ADD_CUSTOM_TARGET(install_schemas
++ COMMAND cmake -E copy ${GCONF_SCHEMAS_FILE} ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename}
++ COMMAND GCONF_CONFIG_SOURCE=${GCONF_CONFIG_SOURCE}
++ ${GCONFTOOL_CMD} --makefile-install-rule
++ ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename}
++ DEPENDS ${GCONF_SCHEMAS_FILE}
++ COMMENT "Installing schemas"
++ )
++
++ INSTALL(FILES ${GCONF_SCHEMAS_FILE}
++ DESTINATION "${GCONF_SCHEMAS_INSTALLED_DIR}")
++ENDIF(NOT DEFINED _MANAGE_GCONF_CMAKE_)
++
++
+--- /dev/null
++++ b/Modules/ManageInstall.cmake
+@@ -0,0 +1,25 @@
++# - Manage installation
++# Convenient collection of macros and functions to manage installation.
++#
++# Defines following macros:
++# MANAGE_INSTALL(var file1 [file2 ....])
++# - Managed install. Files are installed to the path specified by var.
++# This macro also sets 'MANAGE_INSTALL_$var' as files that associate to this var
++# The files that are associated to this var is
++# Read and define:
++# + MANAGE_INSTALL_$var : Files to be installed under var.
++# Arguments:
++# + var: A variable that contains install destination path
++# + file1 ... : File to be installed to $var
++#
++
++IF(NOT DEFINED _MANAGE_INSTALL_CMAKE_)
++ SET (_MANAGE_INSTALL_CMAKE_ "DEFINED")
++ SET(MANAGE_INSTALL_FILES "")
++
++ MACRO(MANAGE_INSTALL var file1)
++ LIST(APPEND MANAGE_INSTALL_${var} ${file1} ${ARGN})
++ INSTALL(FILES $file1 ${ARGN}
++ DESTINATION "${var}")
++ ENDMACRO(MANAGE_INSTALL var file1)
++ENDIF(NOT DEFINED _MANAGE_INSTALL_CMAKE_)
+--- /dev/null
++++ b/Modules/ManageMessage.cmake
+@@ -0,0 +1,60 @@
++# - Manage the output and debug messages.
++# This module has macros that control how many messages to be shown
++# by defining the desire message level.
++#
++# Defined variables that represent verbose levels:
++# 1: M_FATAL - Critical error,Should stop immediately
++# 2: M_ERROR - Error that will Eventually fail
++# 3: M_WARN - General Warning.
++# 4: M_OFF - Optional functionalities are turned-off because requirement is not met.
++# 5: M_INFO1 - Info/debug message
++# 6: M_INFO2 - Info/debug message
++# 7: M_INFO3 - Info/debug message
++#
++# Read following variable:
++# + MANAGE_MESSAGE_LEVEL: Message level in integer.
++# Messages with greater level will be suppressed.
++# Default is ${M_OFF}
++# + MANAGE_MESSAGE_LABELS: Labels that printed in front of the message for
++# corresponding message level.
++# Default is "[Fatal] ;[Error] ;[Warn] ;[Off] ;[Info1] ;[Info2] ;[Info3] ")
++#
++# Define following macros:
++# M_MSG(level msg)
++# - Surpress the message if level is higher than MANAGE_MESSAGE_LEVEL
++# Otherwise show the message.
++# Arguments:
++# + level: level of the message.
++# + msg: Message to show.
++#
++
++
++IF(NOT DEFINED _MANAGE_MESSAGE_CMAKE_)
++ SET(_MANAGE_MESSAGE_CMAKE_ "DEFINED")
++ SET(M_FATAL 1)
++ SET(M_ERROR 2)
++ SET(M_WARN 3)
++ SET(M_OFF 4)
++ SET(M_INFO1 5)
++ SET(M_INFO2 6)
++ SET(M_INFO3 7)
++ IF(NOT DEFINED MANAGE_MESSAGE_LABELS)
++ SET(MANAGE_MESSAGE_LABELS
++ "[Fatal] ;[Error] ;[Warn] ;[Off] ;[Info1] ;[Info2] ;[Info3] ")
++ ENDIF(NOT DEFINED MANAGE_MESSAGE_LABELS)
++
++ SET(MANAGE_MESSAGE_LEVEL ${M_OFF} CACHE STRING "Message (Verbose) Level")
++
++ MACRO(M_MSG level msg)
++ IF(NOT ${level} GREATER ${MANAGE_MESSAGE_LEVEL})
++ MATH(EXPR _lvl ${level}-1)
++ LIST(GET MANAGE_MESSAGE_LABELS ${_lvl} _label)
++ IF(${level} EQUAL 1)
++ MESSAGE(FATAL_ERROR "${_label}${msg}")
++ ELSE(${level} EQUAL 1)
++ MESSAGE("${_label}${msg}")
++ ENDIF(${level} EQUAL 1)
++ ENDIF(NOT ${level} GREATER ${MANAGE_MESSAGE_LEVEL})
++ ENDMACRO(M_MSG level msg)
++ENDIF(NOT DEFINED _MANAGE_MESSAGE_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageRPM.cmake
+@@ -0,0 +1,327 @@
++# - RPM generation, maintaining (remove old rpm) and verification (rpmlint).
++# This module provides macros that provides various rpm building and
++# verification targets.
++#
++# This module needs variable from ManageArchive, so INCLUDE(ManageArchive)
++# before this module.
++#
++# Includes:
++# ManageMessage
++# ManageTarget
++#
++# Reads and defines following variables if dependencies are satisfied:
++# PRJ_RPM_SPEC_IN_FILE: spec.in that generate spec
++# PRJ_RPM_SPEC_FILE: spec file for rpmbuild.
++# RPM_DIST_TAG: (optional) Current distribution tag such as el5, fc10.
++# Default: Distribution tag from rpm --showrc
++#
++# RPM_BUILD_TOPDIR: (optional) Directory of the rpm topdir.
++# Default: ${CMAKE_BINARY_DIR}
++#
++# RPM_BUILD_SPECS: (optional) Directory of generated spec files
++# and RPM-ChangeLog.
++# Note this variable is not for locating
++# SPEC template (project.spec.in), RPM-ChangeLog source files.
++# These are located through the path of spec_in.
++# Default: ${RPM_BUILD_TOPDIR}/SPECS
++#
++# RPM_BUILD_SOURCES: (optional) Directory of source (tar.gz or zip) files.
++# Default: ${RPM_BUILD_TOPDIR}/SOURCES
++#
++# RPM_BUILD_SRPMS: (optional) Directory of source rpm files.
++# Default: ${RPM_BUILD_TOPDIR}/SRPMS
++#
++# RPM_BUILD_RPMS: (optional) Directory of generated rpm files.
++# Default: ${RPM_BUILD_TOPDIR}/RPMS
++#
++# RPM_BUILD_BUILD: (optional) Directory for RPM build.
++# Default: ${RPM_BUILD_TOPDIR}/BUILD
++#
++# RPM_BUILD_BUILDROOT: (optional) Directory for RPM build.
++# Default: ${RPM_BUILD_TOPDIR}/BUILDROOT
++#
++# Defines following variables:
++# RPM_IGNORE_FILES: A list of exclude file patterns for PackSource.
++# This value is appended to SOURCE_ARCHIVE_IGNORE_FILES after including
++# this module.
++#
++# Defines following Macros:
++# PACK_RPM()
++# - Generate spec and pack rpm according to the spec file.
++# Arguments:
++# Targets:
++# + srpm: Build srpm (rpmbuild -bs).
++# + rpm: Build rpm and srpm (rpmbuild -bb)
++# + rpmlint: Run rpmlint to generated rpms.
++# + clean_rpm": Clean all rpm and build files.
++# + clean_pkg": Clean all source packages, rpm and build files.
++# + clean_old_rpm: Remove old rpm and build files.
++# + clean_old_pkg: Remove old source packages and rpms.
++# This macro defines following variables:
++# + PRJ_RELEASE: Project release with distribution tags. (e.g. 1.fc13)
++# + PRJ_RELEASE_NO: Project release number, without distribution tags. (e.g. 1)
++# + PRJ_SRPM_FILE: Path to generated SRPM file, including relative path.
++# + PRJ_RPM_BUILD_ARCH: Architecture to be build.
++# + PRJ_RPM_FILES: Binary RPM files to be build.
++#
++# RPM_MOCK_BUILD()
++# - Add mock related targets.
++# Targets:
++# + rpm_mock_i386: Make i386 rpm
++# + rpm_mock_x86_64: Make x86_64 rpm
++# This macor reads following variables?:
++# + MOCK_RPM_DIST_TAG: Prefix of mock configure file, such as "fedora-11", "fedora-rawhide", "epel-5".
++# Default: Convert from RPM_DIST_TAG
++#
++
++IF(NOT DEFINED _MANAGE_RPM_CMAKE_)
++ SET (_MANAGE_RPM_CMAKE_ "DEFINED")
++
++ INCLUDE(ManageMessage)
++ INCLUDE(ManageTarget)
++ SET(_manage_rpm_dependency_missing 0)
++
++ FIND_PROGRAM(RPMBUILD_CMD NAMES "rpmbuild-md5")
++ IF("${RPMBUILD_CMD}" STREQUAL "RPMBUILD_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "rpmbuild is not found in PATH, rpm build support is disabled.")
++ SET(_manage_rpm_dependency_missing 1)
++ ENDIF("${RPMBUILD_CMD}" STREQUAL "RPMBUILD_CMD-NOTFOUND")
++
++ SET(_PRJ_RPM_SPEC_IN_FILE_SEARCH_NAMES "${PROJECT_NAME}.spec.in" "project.spec.in")
++ SET(_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH "${CMAKE_SOURCE_DIR}/SPECS" "SPECS" "." "${RPM_BUILD_TOPDIR}/SPECS")
++ FIND_FILE(PRJ_RPM_SPEC_IN_FILE NAMES ${_PRJ_RPM_SPEC_IN_FILE_SEARCH_NAMES} PATHS ${_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH})
++ IF(PRJ_RPM_SPEC_IN_FILE STREQUAL "PRJ_RPM_SPEC_IN_FILE-NOTFOUND")
++ M_MSG(${M_OFF} "Cannot find ${PROJECT}.spec.in or project .in"
++ "${_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH}")
++ M_MSG(${M_OFF} "rpm build support is disabled.")
++ SET(_manage_rpm_dependency_missing 1)
++ ENDIF(PRJ_RPM_SPEC_IN_FILE STREQUAL "PRJ_RPM_SPEC_IN_FILE-NOTFOUND")
++
++ IF(NOT _manage_rpm_dependency_missing)
++ INCLUDE(ManageVariable)
++ SET (SPEC_FILE_WARNING "This file is generated, please modified the .spec.in file instead!")
++
++ EXECUTE_PROCESS(COMMAND rpm --showrc
++ COMMAND grep -E "dist[[:space:]]*\\."
++ COMMAND sed -e "s/^.*dist\\s*\\.//"
++ COMMAND tr \\n \\t
++ COMMAND sed -e s/\\t//
++ OUTPUT_VARIABLE _RPM_DIST_TAG)
++
++ SET(RPM_DIST_TAG "${_RPM_DIST_TAG}" CACHE STRING "RPM Dist Tag")
++ SET(RPM_BUILD_TOPDIR "${CMAKE_BINARY_DIR}" CACHE PATH "RPM topdir")
++ SET(RPM_BUILD_SPECS "${RPM_BUILD_TOPDIR}/SPECS" CACHE PATH "RPM SPECS dir")
++ SET(RPM_BUILD_SOURCES "${RPM_BUILD_TOPDIR}/SOURCES" CACHE PATH "RPM SOURCES dir")
++ SET(RPM_BUILD_SRPMS "${RPM_BUILD_TOPDIR}/SRPMS" CACHE PATH "RPM SRPMS dir")
++ SET(RPM_BUILD_RPMS "${RPM_BUILD_TOPDIR}/RPMS" CACHE PATH "RPM RPMS dir")
++ SET(RPM_BUILD_BUILD "${RPM_BUILD_TOPDIR}/BUILD" CACHE PATH "RPM BUILD dir")
++ SET(RPM_BUILD_BUILDROOT "${RPM_BUILD_TOPDIR}/BUILDROOT" CACHE PATH "RPM BUILDROOT dir")
++
++ ## RPM spec.in and RPM-ChangeLog.prev
++ SET(PRJ_RPM_SPEC_FILE "${RPM_BUILD_SPECS}/${PROJECT_NAME}.spec" CACHE FILEPATH "spec")
++ SET(PRJ_RPM_SPEC_IN_FILE "${_PRJ_RPM_SPEC_IN_FILE}" CACHE FILEPATH "spec.in")
++ GET_FILENAME_COMPONENT(_PRJ_RPM_SPEC_IN_DIR "${PRJ_RPM_SPEC_IN_FILE}" PATH)
++ SET(PRJ_RPM_SPEC_IN_DIR "${_PRJ_RPM_SPEC_IN_DIR}" CACHE INTERNAL "Dir contains spec.in")
++ SET(RPM_CHANGELOG_PREV_FILE "${PRJ_RPM_SPEC_IN_DIR}/RPM-ChangeLog.prev" CACHE FILEPATH "ChangeLog.prev for RPM")
++ SET(RPM_CHANGELOG_FILE "${RPM_BUILD_SPECS}/RPM-ChangeLog" CACHE FILEPATH "ChangeLog for RPM")
++
++ # Add RPM build directories in ignore file list.
++ GET_FILENAME_COMPONENT(_rpm_build_sources_basename ${RPM_BUILD_SOURCES} NAME)
++ GET_FILENAME_COMPONENT(_rpm_build_srpms_basename ${RPM_BUILD_SRPMS} NAME)
++ GET_FILENAME_COMPONENT(_rpm_build_rpms_basename ${RPM_BUILD_RPMS} NAME)
++ GET_FILENAME_COMPONENT(_rpm_build_build_basename ${RPM_BUILD_BUILD} NAME)
++ GET_FILENAME_COMPONENT(_rpm_build_buildroot_basename ${RPM_BUILD_BUILDROOT} NAME)
++ SET(RPM_IGNORE_FILES
++ "/${_rpm_build_sources_basename}/" "/${_rpm_build_srpms_basename}/" "/${_rpm_build_rpms_basename}/"
++ "/${_rpm_build_build_basename}/" "/${_rpm_build_buildroot_basename}/" "debug.*s.list")
++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ${RPM_IGNORE_FILES})
++
++ ENDIF(NOT _manage_rpm_dependency_missing)
++
++ FUNCTION(PRJ_RPM_SPEC_IN_READ_FILE)
++ SETTING_FILE_GET_VARIABLE(_releaseStr Release "${PRJ_RPM_SPEC_IN_FILE}" ":")
++ STRING(REPLACE "%{?dist}" ".${RPM_DIST_TAG}" _PRJ_RELEASE ${_releaseStr})
++ STRING(REPLACE "%{?dist}" "" _PRJ_RELEASE_NO ${_releaseStr})
++ #MESSAGE("_releaseTag=${_releaseTag} _releaseStr=${_releaseStr}")
++
++ SET(PRJ_RELEASE ${_PRJ_RELEASE} CACHE STRING "Release with dist" FORCE)
++ SET(PRJ_RELEASE_NO ${_PRJ_RELEASE_NO} CACHE STRING "Release w/o dist" FORCE)
++ SET(PRJ_SRPM "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE}.src.rpm" CACHE STRING "PRJ SRPM" FORCE)
++ SET(PRJ_SRPM_FILE "${RPM_BUILD_SRPMS}/${PRJ_SRPM}" CACHE FILEPATH "PRJ SRPM File" FORCE)
++
++ ## GET BuildArch
++ SETTING_FILE_GET_VARIABLE(_archStr BuildArch "${PRJ_RPM_SPEC_IN_FILE}" ":")
++ IF(NOT _archStr STREQUAL "noarch")
++ SET(_archStr ${CMAKE_HOST_SYSTEM_PROCESSOR})
++ ENDIF(NOT _archStr STREQUAL "noarch")
++ SET(PRJ_RPM_BUILD_ARCH "${_archStr}" CACHE STRING "BuildArch")
++
++ ## Main rpm
++ SET(PRJ_RPM_FILES "${RPM_BUILD_RPMS}/${PRJ_RPM_BUILD_ARCH}/${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE}.${PRJ_RPM_BUILD_ARCH}.rpm"
++ CACHE STRING "RPM files" FORCE)
++
++ ## Obtains sub packages
++ ## [TODO]
++ ENDFUNCTION(PRJ_RPM_SPEC_IN_READ_FILE)
++
++ MACRO(RPM_CHANGELOG_WRITE_FILE)
++ INCLUDE(DateTimeFormat)
++
++ FILE(WRITE ${RPM_CHANGELOG_FILE} "* ${TODAY_CHANGELOG} ${MAINTAINER} - ${PRJ_VER}-${PRJ_RELEASE_NO}\n")
++ FILE(READ "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" CHANGELOG_ITEMS)
++
++ FILE(APPEND ${RPM_CHANGELOG_FILE} "${CHANGELOG_ITEMS}\n\n")
++
++ # Update RPM_ChangeLog
++ # Use this instead of FILE(READ is to avoid error when reading '\'
++ # character.
++ EXECUTE_PROCESS(COMMAND cat "${RPM_CHANGELOG_PREV_FILE}"
++ OUTPUT_VARIABLE RPM_CHANGELOG_PREV
++ OUTPUT_STRIP_TRAILING_WHITESPACE)
++
++ FILE(APPEND ${RPM_CHANGELOG_FILE} "${RPM_CHANGELOG_PREV}")
++
++ ADD_CUSTOM_COMMAND(OUTPUT ${RPM_CHANGELOG_FILE}
++ COMMAND ${CMAKE_COMMAND} ${CMAKE_SOURCE_DIR}
++ DEPENDS ${CHANGELOG_FILE} ${RPM_CHANGELOG_PREV_FILE}
++ COMMENT "Write ${RPM_CHANGELOG_FILE}"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_TARGET(rpm_changelog_prev_update
++ COMMAND ${CMAKE_COMMAND} -E copy ${RPM_CHANGELOG_FILE} ${RPM_CHANGELOG_PREV_FILE}
++ DEPENDS ${RPM_CHANGELOG_FILE}
++ COMMENT "${RPM_CHANGELOG_FILE} are saving as ${RPM_CHANGELOG_PREV_FILE}"
++ )
++
++ IF(TARGET after_release_commit_pre)
++ ADD_DEPENDENCIES(after_release_commit_pre rpm_changelog_prev_update)
++ ENDIF(TARGET after_release_commit_pre)
++ ENDMACRO(RPM_CHANGELOG_WRITE_FILE)
++
++ MACRO(PACK_RPM)
++ IF(NOT _manage_rpm_dependency_missing )
++ PRJ_RPM_SPEC_IN_READ_FILE()
++ RPM_CHANGELOG_WRITE_FILE()
++
++ # Generate spec
++ CONFIGURE_FILE(${PRJ_RPM_SPEC_IN_FILE} ${PRJ_RPM_SPEC_FILE})
++
++ #-------------------------------------------------------------------
++ # RPM build commands and targets
++
++ FILE(MAKE_DIRECTORY ${RPM_BUILD_BUILD})
++
++ # Don't worry about SRPMS, RPMS and BUILDROOT, it will be created by rpmbuild
++
++ ADD_CUSTOM_TARGET_COMMAND(srpm
++ OUTPUT ${PRJ_SRPM_FILE}
++ COMMAND ${RPMBUILD_CMD} -bs ${PRJ_RPM_SPEC_FILE}
++ --define '_sourcedir ${RPM_BUILD_SOURCES}'
++ --define '_builddir ${RPM_BUILD_BUILD}'
++ --define '_srcrpmdir ${RPM_BUILD_SRPMS}'
++ --define '_rpmdir ${RPM_BUILD_RPMS}'
++ --define '_specdir ${RPM_BUILD_SPECS}'
++ DEPENDS ${PRJ_RPM_SPEC_FILE} ${SOURCE_ARCHIVE_FILE}
++ COMMENT "Building srpm"
++ )
++
++ # RPMs (except SRPM)
++
++ ADD_CUSTOM_TARGET_COMMAND(rpm
++ OUTPUT ${PRJ_RPM_FILES}
++ COMMAND ${RPMBUILD_CMD} -ba ${PRJ_RPM_SPEC_FILE}
++ --define '_sourcedir ${RPM_BUILD_SOURCES}'
++ --define '_builddir ${RPM_BUILD_BUILD}'
++ --define '_buildrootdir ${RPM_BUILD_BUILDROOT}'
++ --define '_srcrpmdir ${RPM_BUILD_SRPMS}'
++ --define '_rpmdir ${RPM_BUILD_RPMS}'
++ --define '_specdir ${RPM_BUILD_SPECS}'
++ DEPENDS ${PRJ_RPM_SPEC_FILE} ${PRJ_SRPM_FILE}
++ COMMENT "Building rpm"
++ )
++
++
++ ADD_CUSTOM_TARGET(install_rpms
++ COMMAND find ${RPM_BUILD_RPMS}/${PRJ_RPM_BUILD_ARCH}
++ -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.${PRJ_RPM_BUILD_ARCH}.rpm' !
++ -name '${PROJECT_NAME}-debuginfo-${PRJ_RELEASE_NO}.*.${PRJ_RPM_BUILD_ARCH}.rpm'
++ -print -exec sudo rpm --upgrade --hash --verbose '{}' '\\;'
++ DEPENDS ${PRJ_RPM_FILES}
++ COMMENT "Install all rpms except debuginfo"
++ )
++
++ ADD_CUSTOM_TARGET(rpmlint
++ COMMAND find .
++ -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.rpm'
++ -print -exec rpmlint '{}' '\\;'
++ DEPENDS ${PRJ_SRPM_FILE} ${PRJ_RPM_FILES}
++ )
++
++ ADD_CUSTOM_TARGET(clean_old_rpm
++ COMMAND find .
++ -name '${PROJECT_NAME}*.rpm' ! -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.rpm'
++ -print -delete
++ COMMAND find ${RPM_BUILD_BUILD}
++ -path '${PROJECT_NAME}*' ! -path '${RPM_BUILD_BUILD}/${PROJECT_NAME}-${PRJ_VER}-*'
++ -print -delete
++ COMMENT "Cleaning old rpms and build."
++ )
++
++ ADD_CUSTOM_TARGET(clean_old_pkg
++ )
++
++ ADD_DEPENDENCIES(clean_old_pkg clean_old_rpm clean_old_pack_src)
++
++ ADD_CUSTOM_TARGET(clean_rpm
++ COMMAND find . -name '${PROJECT_NAME}-*.rpm' -print -delete
++ COMMENT "Cleaning rpms.."
++ )
++ ADD_CUSTOM_TARGET(clean_pkg
++ )
++
++ ADD_DEPENDENCIES(clean_rpm clean_old_rpm)
++ ADD_DEPENDENCIES(clean_pkg clean_rpm clean_pack_src)
++ ENDIF(NOT _manage_rpm_dependency_missing )
++ ENDMACRO(PACK_RPM)
++
++ MACRO(RPM_MOCK_BUILD)
++ IF(NOT _manage_rpm_dependency_missing )
++ FIND_PROGRAM(MOCK_CMD mock)
++ IF(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "mock is not found in PATH, mock support disabled.")
++ ELSE(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND")
++ IF(NOT PRJ_RPM_BUILD_ARCH STREQUAL "noarch")
++ IF(NOT DEFINED MOCK_RPM_DIST_TAG)
++ STRING(REGEX MATCH "^fc([1-9][0-9]*)" _fedora_mock_dist "${RPM_DIST_TAG}")
++ STRING(REGEX MATCH "^el([1-9][0-9]*)" _el_mock_dist "${RPM_DIST_TAG}")
++
++ IF (_fedora_mock_dist)
++ STRING(REGEX REPLACE "^fc([1-9][0-9]*)" "fedora-\\1" MOCK_RPM_DIST_TAG "${RPM_DIST_TAG}")
++ ELSEIF (_el_mock_dist)
++ STRING(REGEX REPLACE "^el([1-9][0-9]*)" "epel-\\1" MOCK_RPM_DIST_TAG "${RPM_DIST_TAG}")
++ ELSE (_fedora_mock_dist)
++ SET(MOCK_RPM_DIST_TAG "fedora-devel")
++ ENDIF(_fedora_mock_dist)
++ ENDIF(NOT DEFINED MOCK_RPM_DIST_TAG)
++
++ #MESSAGE ("MOCK_RPM_DIST_TAG=${MOCK_RPM_DIST_TAG}")
++ ADD_CUSTOM_TARGET(rpm_mock_i386
++ COMMAND ${CMAKE_COMMAND} -E make_directory ${RPM_BUILD_RPMS}/i386
++ COMMAND ${MOCK_CMD} -r "${MOCK_RPM_DIST_TAG}-i386" --resultdir="${RPM_BUILD_RPMS}/i386" ${PRJ_SRPM_FILE}
++ DEPENDS ${PRJ_SRPM_FILE}
++ )
++
++ ADD_CUSTOM_TARGET(rpm_mock_x86_64
++ COMMAND ${CMAKE_COMMAND} -E make_directory ${RPM_BUILD_RPMS}/x86_64
++ COMMAND ${MOCK_CMD} -r "${MOCK_RPM_DIST_TAG}-x86_64" --resultdir="${RPM_BUILD_RPMS}/x86_64" ${PRJ_SRPM_FILE}
++ DEPENDS ${PRJ_SRPM_FILE}
++ )
++ ENDIF(NOT PRJ_RPM_BUILD_ARCH STREQUAL "noarch")
++ ENDIF(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND")
++ ENDIF(NOT _manage_rpm_dependency_missing )
++
++ ENDMACRO(RPM_MOCK_BUILD)
++
++ENDIF(NOT DEFINED _MANAGE_RPM_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageRelease.cmake
+@@ -0,0 +1,57 @@
++# - Module that perform release task.
++# This module provides common targets for release or post-release chores.
++#
++# Defines following macros:
++# MANAGE_RELEASE(releaseTargets)
++# - Run release targets and the target "after_release_commit".
++# This macro skips the missing targets so distro package maintainers
++# do not have to get the irrelevant dependencies.
++# For the "hard" requirement, please use cmake command
++# "ADD_DEPENDENCIES".
++# Arguments:
++# + releaseTargets: Targets need to be done for a release.
++# Note that sequence of the targets does not guarantee the
++# sequence of execution.
++# Defines following targets:
++# + release: Perform everything required for a release.
++# Reads following variables:
++# + RELEASE_DEPENDS_FILES: List of files that the release depends.
++# Note that the sequence of the target does not guarantee the
++# sequence of execution.
++#
++
++IF(NOT DEFINED _MANAGE_RELEASE_CMAKE_)
++ SET(_MANAGE_RELEASE_CMAKE_ "DEFINED")
++ INCLUDE(ManageMessage)
++
++ MACRO(MANAGE_RELEASE)
++ ## Target: release
++ ADD_CUSTOM_TARGET(release
++ DEPENDS ${RELEASE_DEPENDS_FILES}
++ COMMENT "Releasing ${PROJECT_NAME}-${PRJ_VER}"
++ )
++
++ ## Remove the missing targets
++ SET(_releaseTargets "")
++ FOREACH(_target ${ARGN})
++ IF(TARGET ${_target})
++ LIST(APPEND _releaseTargets "${_target}")
++ ELSE(TARGET ${_target})
++ M_MSG(${M_OFF} "Target ${_target} does not exist, skipped.")
++ ENDIF(TARGET ${_target})
++ ENDFOREACH(_target ${ARGN})
++
++ IF(_releaseTargets)
++ ADD_DEPENDENCIES(release ${_releaseTargets})
++ ENDIF(_releaseTargets)
++
++ ## Run after release
++ #ADD_CUSTOM_COMMAND(TARGET release
++ # POST_BUILD
++ # COMMAND make after_release_commit
++ # COMMENT "After released ${PROJECT_NAME}-${PRJ_VER}"
++ # )
++
++ ENDMACRO(MANAGE_RELEASE)
++ENDIF(NOT DEFINED _MANAGE_RELEASE_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageReleaseFedora.cmake
+@@ -0,0 +1,381 @@
++# - Module for working with Fedora and EPEL releases.
++#
++# This module provides convenient targets and macros for Fedora and EPEL
++# releases by using fedpkg, koji, and bodhi
++#
++# This module check following files for dependencies:
++# 1. ~/.fedora-upload-ca.cert : Ensure it has certificate file to submit to Fedora.
++# 2. fedpkg : Required to submit to fedora.
++# 3. koji : Required to submit to fedora.
++# 4. bodhi : Required to submit to fedora.
++#
++# If on of above file is missing, this module will be skipped.
++#
++# This module read the supported release information from cmake-fedora.conf
++# It finds cmake-fedora.conf in following order:
++# 1. Current directory
++# 2. Path as defined CMAKE_SOURCE_DIR
++# 3. /etc/cmake-fedora.conf
++#
++# Includes:
++# ManageMessage
++#
++# Defines following variables:
++# CMAKE_FEDORA_CONF: Path to cmake_fedora.conf
++# FEDPKG_CMD: Path to fedpkg
++# KOJI_CMD: Path to koji
++# GIT_CMD: Path to git
++# BODHI_CMD: Path to bodhi
++# KOJI_BUILD_SCRATCH_CMD: Path to koji-build-scratch
++# FEDORA_RAWHIDE_VER: Fedora Rawhide version.
++# FEDORA_SUPPORTED_VERS: Fedora supported versions.
++# EPEL_SUPPORTED_VERS: EPEL supported versions.
++# FEDPKG_DIR: Dir for fedpkg
++# FEDORA_KAMA: Fedora Karma. Default:3
++# FEDORA_UNSTABLE_KARMA: Fedora unstable Karma. Default:3
++# FEDORA_AUTO_KARMA: Whether to use fedora Karma system. Default:"True"
++#
++# Defines following functions:
++# RELEASE_FEDORA(tagList)
++# - Release this project to specified Fedora and EPEL releases.
++# Arguments:
++# + tagList: Fedora and EPEL dist tags that this project submit to.
++# E.g. "f18", "f17", "el7"
++# You can also specify "fedora" for fedora current releases,
++# and/or "epel" for EPEL current releases.
++#
++# Reads following variables:
++# + PRJ_SRPM_FILE: Project SRPM
++# + FEDPKG_DIR: Directory for fedpkg checkout.
++# Default: FedPkg.
++# Reads and define following variables:
++# + FEDORA_RAWHIDE_VER: Numeric version of rawhide, such as 18
++# + FEDORA_SUPPORTED_VERS: Numeric versions of currently supported Fedora,
++# such as 17;16
++# + EPEL_SUPPORTED_VERS: Numeric versions of currently supported EPEL
++# since version 5. Such as 6;5
++# + FEDORA_KARMA: Karma for auto pushing.
++# Default: 3
++# + FEDORA_UNSTABLE_KARMA: Karma for auto unpushing.
++# Default: 3
++# + FEDORA_AUTO_KARMA: Whether to enable auto pushing/unpushing
++# Default: True
++# Defines following targets:
++# + release_fedora: Make necessary steps for releasing on fedora,
++# such as making source file tarballs, source rpms, build with fedpkg
++# and upload to bodhi.
++# + bodhi_new: Submit the package to bodhi
++# + fedpkg_<tag>_build: Build for tag
++# + fedpkg_<tag>_commit: Import, commit and push
++# + koji_build_scratch: Scratch build using koji
++#
++#
++
++IF(NOT DEFINED _MANAGE_RELEASE_FEDORA_)
++ SET(_MANAGE_RELEASE_FEDORA_ "DEFINED")
++ INCLUDE(ManageMessage)
++ INCLUDE(ManageTarget)
++ SET(_manage_release_fedora_dependencies_missing 0)
++ SET(KOJI_BUILD_SCRATCH "koji-build-scratch" CACHE INTERNAL "Koji build scratch name")
++
++ FIND_FILE(CMAKE_FEDORA_CONF cmake-fedora.conf "." "${CMAKE_SOURCE_DIR}" "${SYSCONF_DIR}")
++ M_MSG(${M_INFO1} "CMAKE_FEDORA_CONF=${CMAKE_FEDORA_CONF}")
++ IF("${CMAKE_FEDORA_CONF}" STREQUAL "CMAKE_FEDORA_CONF-NOTFOUND")
++ M_MSG(${M_OFF} "cmake-fedora.conf cannot be found! Fedora release support disabled.")
++ SET(_manage_release_fedora_dependencies_missing 1)
++ ENDIF("${CMAKE_FEDORA_CONF}" STREQUAL "CMAKE_FEDORA_CONF-NOTFOUND")
++
++ FIND_PROGRAM(FEDPKG_CMD fedpkg)
++ IF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program fedpkg is not found! Fedora support disabled.")
++ SET(_manage_release_fedora_dependencies_missing 1)
++ ENDIF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND")
++
++ FIND_PROGRAM(KOJI_CMD koji)
++ IF(KOJI_CMD STREQUAL "KOJI_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program koji is not found! Koji support disabled.")
++ ENDIF(KOJI_CMD STREQUAL "KOJI_CMD-NOTFOUND")
++
++ FIND_PROGRAM(GIT_CMD git)
++ IF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program git is not found! Fedora support disabled.")
++ SET(_manage_release_fedora_dependencies_missing 1)
++ ENDIF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND")
++
++ FIND_PROGRAM(BODHI_CMD bodhi)
++ IF(BODHI_CMD STREQUAL "BODHI_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program bodhi is not found! Bodhi support disabled.")
++ ENDIF(BODHI_CMD STREQUAL "BODHI_CMD-NOTFOUND")
++
++
++ ## Set variables
++ IF(NOT _manage_release_fedora_dependencies_missing)
++ # Set release tags according to CMAKE_FEDORA_CONF
++ SETTING_FILE_GET_ALL_VARIABLES(${CMAKE_FEDORA_CONF})
++
++ SET(FEDORA_RAWHIDE_VER "${FEDORA_RAWHIDE_VERSION}"
++ CACHE STRING "Fedora Rawhide ver" FORCE)
++ STRING_SPLIT(_FEDORA_SUPPORTED_VERS " " ${FEDORA_SUPPORTED_VERSIONS})
++ SET(FEDORA_SUPPORTED_VERS ${_FEDORA_SUPPORTED_VERS}
++ CACHE STRING "Fedora supported vers" FORCE)
++
++ STRING_SPLIT(_EPEL_SUPPORTED_VERS " " ${EPEL_SUPPORTED_VERSIONS})
++ SET(EPEL_SUPPORTED_VERS ${_EPEL_SUPPORTED_VERS}
++ CACHE STRING "EPEL supported vers" FORCE)
++
++ SET(FEDORA_KOJI_TAG_POSTFIX "" CACHE STRING "Koji Fedora tag prefix")
++ SET(EPEL_KOJI_TAG_POSTFIX "-testing-candidate"
++ CACHE STRING "Koji EPEL tag prefix")
++
++ SET(BODHI_TEMPLATE_FILE "${CMAKE_FEDORA_TMP_DIR}/bodhi.template"
++ CACHE FILEPATH "Bodhi template file"
++ )
++
++ SET(FEDPKG_DIR "${CMAKE_BINARY_DIR}/FedPkg" CACHE PATH "FedPkg dir")
++ FILE(MAKE_DIRECTORY ${FEDPKG_DIR})
++
++ GET_FILENAME_COMPONENT(_FEDPKG_DIR_NAME ${FEDPKG_DIR} NAME)
++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES "/${_FEDPKG_DIR_NAME}/")
++
++ ## Fedora package variables
++ SET(FEDORA_KARMA "3" CACHE STRING "Fedora Karma")
++ SET(FEDORA_UNSTABLE_KARMA "-3" CACHE STRING "Fedora unstable Karma")
++ SET(FEDORA_AUTO_KARMA "True" CACHE STRING "Fedora auto Karma")
++
++ FIND_PROGRAM(KOJI_BUILD_SCRATCH_CMD ${KOJI_BUILD_SCRATCH} PATHS ${CMAKE_BINARY_DIR}/scripts . )
++ IF(KOJI_BUILD_SCRATCH_CMD STREQUAL "KOJI_BUILD_SCRATCH_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program koji_build_scratch is not found!")
++ ENDIF(KOJI_BUILD_SCRATCH_CMD STREQUAL "KOJI_BUILD_SCRATCH_CMD-NOTFOUND")
++
++ SET(FEDPKG_PRJ_DIR "${FEDPKG_DIR}/${PROJECT_NAME}")
++
++ ## Don't use what is in git, otherwise it will be cleaned
++ ## By make clean
++ SET(FEDPKG_PRJ_DIR_GIT "${FEDPKG_PRJ_DIR}/.git/.cmake-fedora")
++
++ ADD_CUSTOM_COMMAND(OUTPUT ${FEDPKG_PRJ_DIR_GIT}
++ COMMAND [ -d ${FEDPKG_PRJ_DIR} ] || ${FEDPKG_CMD} clone ${PROJECT_NAME}
++ COMMAND ${CMAKE_COMMAND} -E touch ${FEDPKG_PRJ_DIR_GIT}
++ COMMENT "Making FedPkg directory"
++ WORKING_DIRECTORY ${FEDPKG_DIR}
++ VERBATIM
++ )
++
++ ENDIF(NOT _manage_release_fedora_dependencies_missing)
++
++ FUNCTION(RELEASE_ADD_KOJI_BUILD_SCRATCH)
++ IF(NOT _manage_release_fedora_dependencies_missing)
++ ADD_CUSTOM_TARGET(koji_build_scratch
++ COMMAND ${KOJI_BUILD_SCRATCH_CMD} ${PRJ_SRPM_FILE} ${ARGN}
++ DEPENDS "${PRJ_SRPM_FILE}"
++ COMMENT "koji scratch build on ${PRJ_SRPM_FILE}"
++ VERBATIM
++ )
++ ENDIF(NOT _manage_release_fedora_dependencies_missing)
++ ADD_DEPENDENCIES(koji_build_scratch rpmlint)
++ ADD_DEPENDENCIES(tag_pre koji_build_scratch)
++ ENDFUNCTION(RELEASE_ADD_KOJI_BUILD_SCRATCH)
++
++ # Convert fedora koji tag to bodhi tag
++ FUNCTION(_RELEASE_TO_BODHI_TAG bodhiTag tag)
++ STRING(REGEX REPLACE "f([0-9]+)" "fc\\1" _tag_replace "${tag}")
++ IF(_tag_replace STREQUAL "")
++ SET(${bodhiTag} "${tag}" PARENT_SCOPE)
++ ELSE(_tag_replace STREQUAL "")
++ SET(${bodhiTag} "${_tag_replace}" PARENT_SCOPE)
++ ENDIF(_tag_replace STREQUAL "")
++ ENDFUNCTION(_RELEASE_TO_BODHI_TAG bodhiTag tag)
++
++ FUNCTION(RELEASE_ADD_FEDPKG_TARGETS tag)
++ IF(NOT _manage_release_fedora_dependencies_missing)
++ SET(_branch ${tag})
++ IF("${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}")
++ SET(_branch "master")
++ ENDIF("${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}")
++
++ _RELEASE_TO_BODHI_TAG(_bodhi_tag "${tag}")
++
++ ## Fedpkg import and commit
++ SET(_import_opt "")
++ IF(NOT ver EQUAL FEDORA_RAWHIDE_VER)
++ SET(_import_opt "-b ${tag}")
++ ENDIF(NOT ver EQUAL FEDORA_RAWHIDE_VER)
++
++ #Commit summary
++ IF (DEFINED CHANGE_SUMMARY)
++ SET (COMMIT_MSG "-m" "${CHANGE_SUMMARY}")
++ ELSE(DEFINED CHANGE_SUMMARY)
++ SET (COMMIT_MSG "-m" "On releasing ${PRJ_VER}-${PRJ_RELEASE_NO}")
++ ENDIF(DEFINED CHANGE_SUMMARY)
++ # Depends on tag file instead of target "tag"
++ # To avoid excessive scratch build and rpmlint
++ SET(_commit_opt --push --tag )
++
++ SET(_fedpkg_nvrd "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.${_bodhi_tag}")
++ SET(_fedpkg_nvrd_commit_file
++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}.commit")
++
++ IF(_branch STREQUAL "master")
++ # Can't use ADD_CUSTOM_TARGET_COMMAND here, as the COMMIT_SUMMARY may have semi-colon ':'
++ ADD_CUSTOM_COMMAND(OUTPUT "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}"
++ COMMAND test -d ${PROJECT_NAME} || ${FEDPKG_CMD} clone ${PROJECT_NAME}
++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch}
++ COMMAND ${GIT_CMD} pull --all
++ COMMAND ${FEDPKG_CMD} import "${PRJ_SRPM_FILE}"
++ COMMAND ${FEDPKG_CMD} commit ${_commit_opt} -m "${CHANGE_SUMMARY}"
++ COMMAND ${GIT_CMD} push --all
++ COMMAND ${CMAKE_COMMAND} -E touch "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}"
++ DEPENDS "${FEDPKG_PRJ_DIR_GIT}" "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" "${PRJ_SRPM_FILE}"
++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR}
++ COMMENT "fedpkg commit on ${_branch} with ${PRJ_SRPM_FILE}"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_commit
++ DEPENDS ${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}
++ )
++ ELSE(_branch STREQUAL "master")
++ ADD_CUSTOM_COMMAND(OUTPUT "${_fedpkg_nvrd_commit_file}"
++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch}
++ COMMAND ${GIT_CMD} pull
++ COMMAND ${GIT_CMD} merge -m "Merge branch 'master' into ${_branch}" master
++ COMMAND ${FEDPKG_CMD} push
++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_commit_file}"
++ DEPENDS "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}"
++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR}
++ COMMENT "fedpkg commit on ${_branch} with ${PRJ_SRPM_FILE}"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_commit
++ DEPENDS "${_fedpkg_nvrd_commit_file}"
++ )
++ ENDIF(_branch STREQUAL "master")
++
++ ## Fedpkg build
++ SET(_fedpkg_nvrd_build_file
++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}")
++
++ ADD_CUSTOM_COMMAND(OUTPUT "${_fedpkg_nvrd_build_file}"
++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch}
++ COMMAND ${FEDPKG_CMD} build
++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_build_file}"
++ DEPENDS "${_fedpkg_nvrd_commit_file}"
++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR}
++ COMMENT "fedpkg build on ${_branch}"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_build
++ DEPENDS "${_fedpkg_nvrd_build_file}"
++ )
++
++ ADD_DEPENDENCIES(bodhi_new fedpkg_${_branch}_build)
++
++ ## Fedpkg update
++ SET(_fedpkg_nvrd_update_file
++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}.update")
++
++ ADD_CUSTOM_TARGET_COMMAND(fedpkg_${_branch}_update
++ OUTPUT "${_fedpkg_nvrd_update_file}"
++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch}
++ COMMAND ${FEDPKG_CMD} update
++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_build_file}"
++ DEPENDS ${_fedpkg_nvrd_build_file}
++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR}
++ COMMENT "fedpkg build on ${_branch}"
++ VERBATIM
++ )
++
++ ENDIF(NOT _manage_release_fedora_dependencies_missing)
++ ENDFUNCTION(RELEASE_ADD_FEDPKG_TARGETS tag)
++
++ MACRO(_append_notes _file)
++ STRING(REGEX REPLACE "\n" "\n " _notes "${CHANGELOG_ITEMS}")
++ FILE(APPEND "${_file}" "notes=${_notes}\n\n")
++ ENDMACRO(_append_notes _file)
++
++ FUNCTION(RELEASE_APPEND_BODHI_FILE tag)
++ IF(NOT _manage_release_fedora_dependencies_missing)
++ # Rawhide does not go to bodhi
++ IF(NOT "${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}")
++ _RELEASE_TO_BODHI_TAG(_bodhi_tag "${tag}")
++
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "[${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.${_bodhi_tag}]\n\n")
++
++ IF(BODHI_UPDATE_TYPE)
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "type=${BODHI_UPDATE_TYPE}\n\n")
++ ELSE(BODHI_UPDATE_TYPE)
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "type=bugfix\n\n")
++ ENDIF(BODHI_UPDATE_TYPE)
++
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "request=testing\n")
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "bugs=${REDHAT_BUGZILLA}\n")
++
++ _append_notes(${BODHI_TEMPLATE_FILE})
++
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "autokarma=${FEDORA_AUTO_KARMA}\n")
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "stable_karma=${FEDORA_KARMA}\n")
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "unstable_karma=${FEDORA_UNSTABLE_KARMA}\n")
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "close_bugs=True\n")
++
++ IF(SUGGEST_REBOOT)
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "suggest_reboot=True\n")
++ ELSE(SUGGEST_REBOOT)
++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "suggest_reboot=False\n\n")
++ ENDIF(SUGGEST_REBOOT)
++ ENDIF(NOT "${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}")
++ ENDIF(NOT _manage_release_fedora_dependencies_missing)
++ ENDFUNCTION(RELEASE_APPEND_BODHI_FILE tag)
++
++ FUNCTION(RELEASE_FEDORA)
++ IF(NOT _manage_release_fedora_dependencies_missing)
++ ## Parse tags
++ SET(_build_list "f${FEDORA_RAWHIDE_VER}")
++ FOREACH(_rel ${ARGN})
++ IF(_rel STREQUAL "fedora")
++ FOREACH(_ver ${FEDORA_SUPPORTED_VERS})
++ LIST(APPEND _build_list "f${_ver}")
++ ENDFOREACH(_ver ${FEDORA_SUPPORTED_VERS})
++ ELSEIF(_rel STREQUAL "epel")
++ FOREACH(_ver ${EPEL_SUPPORTED_VERS})
++ LIST(APPEND _build_list "el${_ver}")
++ ENDFOREACH(_ver ${FEDORA_SUPPORTED_VERS})
++ ELSE(_rel STREQUAL "fedora")
++ LIST(APPEND _build_list "${_rel}")
++ ENDIF(_rel STREQUAL "fedora")
++ ENDFOREACH(_rel ${ARGN})
++ LIST(REMOVE_DUPLICATES _build_list)
++
++ IF(BODHI_USER)
++ SET(_bodhi_login "-u ${BODHI_USER}")
++ ENDIF(BODHI_USER)
++
++ ADD_CUSTOM_TARGET(bodhi_new
++ COMMAND ${BODHI_CMD} --new ${_bodhi_login} --file ${BODHI_TEMPLATE_FILE}
++ DEPENDS "${BODHI_TEMPLATE_FILE}"
++ COMMENT "Submit new release to bodhi (Fedora)"
++ VERBATIM
++ )
++
++ # NVRD: Name-Version-Release-Dist
++ SET(FEDPKG_NVR_RAWHIDE "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.fc${FEDORA_RAWHIDE_VER}")
++ SET(FEDPKG_NVR_RAWHIDE_COMMIT_FILE "${CMAKE_FEDORA_TMP_DIR}/${FEDPKG_NVR_RAWHIDE}.commit")
++
++ ## Create targets
++ FILE(REMOVE "${BODHI_TEMPLATE_FILE}")
++ RELEASE_ADD_KOJI_BUILD_SCRATCH(${_build_list})
++ FOREACH(_tag ${_build_list})
++ RELEASE_ADD_FEDPKG_TARGETS("${_tag}")
++ RELEASE_APPEND_BODHI_FILE("${_tag}")
++ ENDFOREACH(_tag ${_build_list})
++
++ ADD_CUSTOM_TARGET(release_fedora
++ COMMENT "Release for Fedora")
++
++ ADD_DEPENDENCIES(release_fedora bodhi_new)
++
++ ENDIF(NOT _manage_release_fedora_dependencies_missing)
++ ENDFUNCTION(RELEASE_FEDORA)
++ENDIF(NOT DEFINED _MANAGE_RELEASE_FEDORA_)
++
+--- /dev/null
++++ b/Modules/ManageSourceVersionControl.cmake
+@@ -0,0 +1,137 @@
++# - Module for manipulate source version control systems.
++# This module provides an universal interface for supported
++# source version control systems, namely:
++# Git, Mercurial and SVN.
++#
++# Following targets are defined for each source version control (in Git terminology):
++# - tag: Tag the working tree with PRJ_VER and CHANGE_SUMMARY.
++# This target also does:
++# 1. Ensure there is nothing uncommitted.
++# 2. Push the commits and tags to server
++# - tag_pre: Targets that 'tag' depends on.
++# So you can push some check before the tag.
++# - after_release_commit:
++# This target does some post release chores, such as
++# updating ChangeLog.prev and RPM-ChangeLog.prev, then push them to server.
++#
++# Following variables are defined for each source version control:
++# - MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE:
++# The file that would be touched after target tag is completed.
++#
++#
++
++IF(NOT DEFINED _MANAGE_SOURCE_VERSION_CONTROL_CMAKE_)
++ SET(_MANAGE_SOURCE_VERSION_CONTROL_CMAKE_ "DEFINED")
++ SET(_after_release_message "After released ${PRJ_VER}")
++ INCLUDE(ManageTarget)
++
++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_COMMON)
++ ADD_CUSTOM_TARGET(tag_pre
++ COMMENT "Pre-tagging check"
++ )
++
++
++ ADD_CUSTOM_TARGET(after_release_commit_pre
++ COMMENT "Before 'after_release_commit'"
++ )
++
++ IF(TARGET changelog_prev_update)
++ ADD_DEPENDENCIES(after_release_commit_pre changelog_prev_update)
++ ENDIF(TARGET changelog_prev_update)
++
++ IF(TARGET rpm_changelog_prev_update)
++ ADD_DEPENDENCIES(after_release_commit_pre rpm_changelog_prev_update)
++ ENDIF(TARGET rpm_changelog_prev_update)
++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_COMMON)
++
++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_GIT)
++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE
++ ${CMAKE_SOURCE_DIR}/.git/refs/tags/${PRJ_VER}
++ CACHE PATH "Source Version Control Tag File" FORCE)
++
++ ADD_CUSTOM_TARGET(after_release_commit
++ COMMAND make after_release_commit_pre
++ COMMAND git commit -a -m "${_after_release_message}"
++ COMMAND git push
++ COMMENT "After released ${PRJ_VER}"
++ VERBATIM
++ )
++
++ # Can't use ADD_CUSTOM_TARGET here, as the COMMIT_SUMMARY may have semi-colon ':'
++ ADD_CUSTOM_TARGET(tag
++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}"
++ )
++
++ ADD_CUSTOM_TARGET(commit_clean
++ COMMAND git diff --exit-code
++ COMMENT "Is git commit clean?"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_COMMAND(OUTPUT ${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}
++ COMMAND make commit_clean
++ COMMAND make tag_pre
++ COMMAND git tag -a -m "${CHANGE_SUMMARY}" "${PRJ_VER}" HEAD
++ COMMENT "Tagging the source as ver ${PRJ_VER}"
++ VERBATIM
++ )
++ MANAGE_SOURCE_VERSION_CONTROL_COMMON()
++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_GIT)
++
++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_HG)
++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE
++ ${CMAKE_FEDORA_TEMP_DIR}/${PRJ_VER}
++ CACHE PATH "Source Version Control Tag File" FORCE)
++
++ ADD_CUSTOM_TARGET(after_release_commit
++ COMMAND make after_release_commit_pre
++ COMMAND hg commit -m "${_after_release_message}"
++ COMMAND hg push
++ COMMENT "After released ${PRJ_VER}"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_TARGET(tag
++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}"
++ )
++
++ ADD_CUSTOM_COMMAND(OUTPUT "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}"
++ COMMAND make tag_pre
++ COMMAND hg tag -m "${CHANGE_SUMMARY}" "${PRJ_VER}"
++ COMMAND ${CMAKE_COMMAND} -E touch "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}"
++ COMMENT "Tagging the source as ver ${PRJ_VER}"
++ VERBATIM
++ )
++
++ MANAGE_SOURCE_VERSION_CONTROL_COMMON()
++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_HG)
++
++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_SVN)
++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE
++ ${CMAKE_FEDORA_TEMP_DIR}/${PRJ_VER}
++ CACHE PATH "Source Version Control Tag File" FORCE)
++
++ ADD_CUSTOM_TARGET(after_release_commit
++ COMMAND make after_release_commit_pre
++ COMMAND svn commit -m "${_after_release_message}"
++ COMMENT "After released ${PRJ_VER}"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_TARGET(tag
++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}"
++ )
++
++ ADD_CUSTOM_TARGET(OUTPUT "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}"
++ COMMAND make tag_pre
++ COMMAND svn copy "${SOURCE_BASE_URL}/trunk" "${SOURCE_BASE_URL}/tags/${PRJ_VER}" -m "${CHANGE_SUMMARY}"
++ COMMAND cmake -E touch ${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}
++ COMMENT "Tagging the source as ver ${PRJ_VER}"
++ VERBATIM
++ )
++
++ MANAGE_SOURCE_VERSION_CONTROL_COMMON()
++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_SVN)
++
++ENDIF(NOT DEFINED _MANAGE_SOURCE_VERSION_CONTROL_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageString.cmake
+@@ -0,0 +1,325 @@
++# - Collection of String utility macros.
++#
++# Included by:
++# ManageVarible
++#
++# Defines the following macros:
++# STRING_TRIM(var str [NOUNQUOTE])
++# - Trim a string by removing the leading and trailing spaces,
++# just like STRING(STRIP ...) in CMake 2.6 and later.
++# This macro is needed as CMake 2.4 does not support STRING(STRIP ..)
++# This macro also remove quote and double quote marks around the string,
++# unless NOUNQUOTE is defined.
++# * Parameters:
++# + var: A variable that stores the result.
++# + str: A string.
++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string.
++#
++# STRING_ESCAPE_SEMICOLON(var str)
++# - Escape the semicolon
++# * Parameters:
++# + var: A variable that stores the result.
++# + str: A string.
++#
++# STRING_UNQUOTE(var str)
++# - Remove double quote marks and quote marks around a string.
++# If the string is not quoted, then content of str is copied to var
++# * Parameters:
++# + var: A variable that stores the result.
++# + str: A string.
++#
++# STRING_JOIN(var delimiter str_list [str...])
++# - Concatenate strings, with delimiter inserted between strings.
++# * Parameters:
++# + var: A variable that stores the result.
++# + str_list: A list of string.
++# + str: (Optional) more string to be join.
++#
++# STRING_SPLIT(var delimiter str [NOESCAPE_SEMICOLON])
++# - Split a string into a list using a delimiter, which can be in 1 or more
++# characters long.
++# * Parameters:
++# + var: A variable that stores the result.
++# + delimiter: To separate a string.
++# + str: A string.
++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons.
++#
++
++IF(NOT DEFINED _MANAGE_STRING_CMAKE_)
++ SET(_MANAGE_STRING_CMAKE_ "DEFINED")
++
++ # Return (index of lefttmost non match character)
++ # Return _strLen if all characters matches regex
++ FUNCTION(STRING_LEFTMOST_NOTMATCH_INDEX var str regex)
++ STRING(LENGTH "${str}" _strLen)
++ SET(_index 0)
++ SET(_ret ${_strLen})
++ WHILE(_index LESS _strLen)
++ STRING(SUBSTRING "${str}" ${_index} 1 _strCursor)
++ #MESSAGE("***STRING_UNQUOTE: _i=${_index} _strCursor=${_strCursor}")
++ IF(NOT "${_strCursor}" MATCHES "${regex}")
++ SET(_ret ${_index})
++ SET(_index ${_strLen})
++ ENDIF(NOT "${_strCursor}" MATCHES "${regex}")
++
++ MATH(EXPR _index ${_index}+1)
++ ENDWHILE(_index LESS _strLen)
++ SET(${var} ${_ret} PARENT_SCOPE)
++ ENDFUNCTION(STRING_LEFTMOST_NOTMATCH_INDEX var str)
++
++ # Return (index of rightmost non match character) +1
++ # Return 0 if all characters matches regex
++ #
++ FUNCTION(STRING_RIGHTMOST_NOTMATCH_INDEX var str regex)
++ STRING(LENGTH "${str}" _strLen)
++ MATH(EXPR _index ${_strLen})
++ SET(_ret 0)
++ WHILE(_index GREATER 0)
++ MATH(EXPR _index_1 ${_index}-1)
++ STRING(SUBSTRING "${str}" ${_index_1} 1 _strCursor)
++ #MESSAGE("***STRING_UNQUOTE: _i=${_index} _strCursor=${_strCursor}")
++
++ IF(NOT "${_strCursor}" MATCHES "${regex}")
++ SET(_ret ${_index})
++ SET(_index 0)
++ ENDIF(NOT "${_strCursor}" MATCHES "${regex}")
++ MATH(EXPR _index ${_index}-1)
++ ENDWHILE(_index GREATER 0)
++ SET(${var} ${_ret} PARENT_SCOPE)
++ ENDFUNCTION(STRING_RIGHTMOST_NOTMATCH_INDEX var str)
++
++ FUNCTION(STRING_TRIM var str)
++ #_STRING_ESCAPE(_ret "${str}" ${ARGN})
++ STRING_LEFTMOST_NOTMATCH_INDEX(_leftIndex "${str}" "[ \t\n\r]")
++ STRING_RIGHTMOST_NOTMATCH_INDEX(_rightIndex "${str}" "[ \t\n\r]")
++ #MESSAGE("_left=${_leftIndex} _rightIndex=${_rightIndex} str=|${str}|")
++ MATH(EXPR _subLen ${_rightIndex}-${_leftIndex})
++ SET(_NOUNQUOTE 0)
++ FOREACH( _arg ${ARGN})
++ IF(_arg STREQUAL "NOUNQUOTE")
++ SET(_NOUNQUOTE 1)
++ ENDIF(_arg STREQUAL "NOUNQUOTE")
++ ENDFOREACH( _arg ${ARGN})
++
++ IF(_subLen GREATER 0)
++ STRING(SUBSTRING "${str}" ${_leftIndex} ${_subLen} _ret)
++ # IF _subLen > 1
++ # IF UNQUOTE; then unquote
++ # Otherwise don't touch
++ IF (_subLen GREATER 1)
++ IF(NOT _NOUNQUOTE)
++ STRING_UNQUOTE(_ret "${_ret}")
++ ENDIF(NOT _NOUNQUOTE)
++ ENDIF (_subLen GREATER 1)
++ ELSE(_subLen GREATER 0)
++ SET(_ret "")
++ ENDIF(_subLen GREATER 0)
++ SET(${var} "${_ret}" PARENT_SCOPE)
++
++ # Unencoding
++ #_STRING_UNESCAPE(${var} "${_ret}" ${ARGN})
++ ENDFUNCTION(STRING_TRIM var str)
++
++ MACRO(STRING_ESCAPE_SEMICOLON var str)
++ STRING(REGEX REPLACE ";" "\\\\;" ${var} "${str}")
++ ENDMACRO(STRING_ESCAPE_SEMICOLON var str)
++
++ # Internal macro
++ # Nested Variable cannot be escaped here, as variable is already substituted
++ # at the time it passes to this macro.
++ MACRO(_STRING_ESCAPE var str)
++ # ';' and '\' are tricky, need to be encoded.
++ # '#' => '#H'
++ # '\' => '#B'
++ # ';' => '#S'
++ SET(_NOESCAPE_SEMICOLON "")
++ SET(_NOESCAPE_HASH "")
++
++ FOREACH(_arg ${ARGN})
++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON")
++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON")
++ ELSEIF(${_arg} STREQUAL "NOESCAPE_HASH")
++ SET(_NOESCAPE_HASH "NOESCAPE_HASH")
++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON")
++ ENDFOREACH(_arg ${ARGN})
++
++ IF(_NOESCAPE_HASH STREQUAL "")
++ STRING(REGEX REPLACE "#" "#H" _ret "${str}")
++ ELSE(_NOESCAPE_HASH STREQUAL "")
++ SET(_ret "${str}")
++ ENDIF(_NOESCAPE_HASH STREQUAL "")
++
++ STRING(REGEX REPLACE "\\\\" "#B" _ret "${_ret}")
++ IF(_NOESCAPE_SEMICOLON STREQUAL "")
++ STRING(REGEX REPLACE ";" "#S" _ret "${_ret}")
++ ENDIF(_NOESCAPE_SEMICOLON STREQUAL "")
++ #MESSAGE("_STRING_ESCAPE:_ret=${_ret}")
++ SET(${var} "${_ret}")
++ ENDMACRO(_STRING_ESCAPE var str)
++
++ MACRO(_STRING_UNESCAPE var str)
++ # '#B' => '\'
++ # '#H' => '#'
++ # '#D' => '$'
++ # '#S' => ';'
++ SET(_ESCAPE_VARIABLE "")
++ SET(_NOESCAPE_SEMICOLON "")
++ SET(_ret "${str}")
++ FOREACH(_arg ${ARGN})
++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON")
++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON")
++ ELSEIF(${_arg} STREQUAL "ESCAPE_VARIABLE")
++ SET(_ESCAPE_VARIABLE "ESCAPE_VARIABLE")
++ STRING(REGEX REPLACE "#D" "$" _ret "${_ret}")
++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON")
++ ENDFOREACH(_arg ${ARGN})
++ #MESSAGE("###_STRING_UNESCAPE: var=${var} _ret=${_ret} _NOESCAPE_SEMICOLON=${_NOESCAPE_SEMICOLON} ESCAPE_VARIABLE=${_ESCAPE_VARIABLE}")
++
++ STRING(REGEX REPLACE "#B" "\\\\" _ret "${_ret}")
++ IF("${_NOESCAPE_SEMICOLON}" STREQUAL "")
++ # ESCAPE_SEMICOLON
++ STRING(REGEX REPLACE "#S" "\\\\;" _ret "${_ret}")
++ ELSE("${_NOESCAPE_SEMICOLON}" STREQUAL "")
++ # Don't ESCAPE_SEMICOLON
++ STRING(REGEX REPLACE "#S" ";" _ret "${_ret}")
++ ENDIF("${_NOESCAPE_SEMICOLON}" STREQUAL "")
++
++ IF(NOT _ESCAPE_VARIABLE STREQUAL "")
++ # '#D' => '$'
++ STRING(REGEX REPLACE "#D" "$" _ret "${_ret}")
++ ENDIF(NOT _ESCAPE_VARIABLE STREQUAL "")
++ STRING(REGEX REPLACE "#H" "#" _ret "${_ret}")
++ SET(${var} "${_ret}")
++ #MESSAGE("*** _STRING_UNESCAPE: ${var}=${${var}}")
++ ENDMACRO(_STRING_UNESCAPE var str)
++
++ MACRO(STRING_UNQUOTE var str)
++ SET(_ret "${str}")
++ STRING(LENGTH "${str}" _strLen)
++
++ # IF _strLen > 1
++ # IF lCh and rCh are both "\""
++ # Remove _lCh and _rCh
++ # ELSEIF lCh and rCh are both "'"
++ # Remove _lCh and _rCh
++ # Otherwise don't touch
++ IF(_strLen GREATER 1)
++ STRING(SUBSTRING "${str}" 0 1 _lCh)
++ MATH(EXPR _strLen_1 ${_strLen}-1)
++ MATH(EXPR _strLen_2 ${_strLen_1}-1)
++ STRING(SUBSTRING "${str}" ${_strLen_1} 1 _rCh)
++ #MESSAGE("_lCh=${_lCh} _rCh=${_rCh} _ret=|${_ret}|")
++ IF("${_lCh}" STREQUAL "\"" AND "${_rCh}" STREQUAL "\"")
++ STRING(SUBSTRING "${_ret}" 1 ${_strLen_2} _ret)
++ ELSEIF("${_lCh}" STREQUAL "'" AND "${_rCh}" STREQUAL "'")
++ STRING(SUBSTRING "${_ret}" 1 ${_strLen_2} _ret)
++ ENDIF("${_lCh}" STREQUAL "\"" AND "${_rCh}" STREQUAL "\"")
++ ENDIF (_strLen GREATER 1)
++ SET(${var} "${_ret}")
++ ENDMACRO(STRING_UNQUOTE var str)
++
++ MACRO(STRING_JOIN var delimiter str_list)
++ SET(_ret "")
++ FOREACH(_str ${str_list})
++ IF(_ret STREQUAL "")
++ SET(_ret "${_str}")
++ ELSE(_ret STREQUAL "")
++ SET(_ret "${_ret}${delimiter}${_str}")
++ ENDIF(_ret STREQUAL "")
++ ENDFOREACH(_str ${str_list})
++
++ FOREACH(_str ${ARGN})
++ IF(_ret STREQUAL "")
++ SET(_ret "${_str}")
++ ELSE(_ret STREQUAL "")
++ SET(_ret "${_ret}${delimiter}${_str}")
++ ENDIF(_ret STREQUAL "")
++ ENDFOREACH(_str ${ARGN})
++ SET(${var} "${_ret}")
++ ENDMACRO(STRING_JOIN var delimiter str_list)
++
++ FUNCTION(STRING_FIND var str search_str)
++ STRING(LENGTH "${str}" _str_len)
++ STRING(LENGTH "${search_str}" _search_len)
++ MATH(EXPR _str_end ${_str_len}-${_search_len}+1)
++
++ SET(_index 0)
++ SET(_str_remain "")
++ SET(_result -1)
++ WHILE(_index LESS _str_end)
++ STRING(SUBSTRING "${str}" ${_index} ${_search_len} _str_window)
++ IF("${_str_window}" STREQUAL "${search_str}")
++ SET(_result ${_index})
++ BREAK()
++ ELSE("${_str_window}" STREQUAL "${search_str}")
++ MATH(EXPR _index ${_index}+1)
++ ENDIF("${_str_window}" STREQUAL "${search_str}")
++ ENDWHILE(_index LESS _str_end)
++ SET(${var} ${_result} PARENT_SCOPE)
++ ENDFUNCTION(STRING_FIND var str search)
++
++ FUNCTION(STRING_SPLIT_2 var str_remain delimiter str)
++ STRING_FIND(_index "${str}" "${delimiter}")
++ IF(_index EQUAL -1)
++ SET(${var} "${str}" PARENT_SCOPE)
++ SET(${str_remain} "" PARENT_SCOPE)
++ ELSE(_index EQUAL -1)
++ STRING(SUBSTRING "${str}" 0 ${_index} _var)
++ SET(${var} "${_var}" PARENT_SCOPE)
++
++ STRING(LENGTH "${str}" _str_len)
++ STRING(LENGTH "${delimiter}" _delimiter_len)
++ MATH(EXPR _str_2_start ${_index}+${_delimiter_len})
++ MATH(EXPR _str_2_len ${_str_len}-${_index}-${_delimiter_len})
++ STRING(SUBSTRING "${str}" ${_str_2_start} ${_str_2_len} _str_remain)
++ SET(${str_remain} "${_str_remain}" PARENT_SCOPE)
++ ENDIF(_index EQUAL -1)
++ ENDFUNCTION(STRING_SPLIT_2 var str_remain delimiter str)
++
++ MACRO(STRING_SPLIT var delimiter str)
++ #MESSAGE("***STRING_SPLIT: var=${var} str=${str}")
++ SET(_max_tokens "")
++ SET(_NOESCAPE_SEMICOLON "")
++ SET(_ESCAPE_VARIABLE "")
++ FOREACH(_arg ${ARGN})
++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON")
++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON")
++ ELSEIF(${_arg} STREQUAL "ESCAPE_VARIABLE")
++ SET(_ESCAPE_VARIABLE "ESCAPE_VARIABLE")
++ ELSE(${_arg} STREQUAL "NOESCAPE_SEMICOLON")
++ SET(_max_tokens ${_arg})
++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON")
++ ENDFOREACH(_arg ${ARGN})
++
++ IF(NOT _max_tokens)
++ SET(_max_tokens -1)
++ ENDIF(NOT _max_tokens)
++
++ _STRING_ESCAPE(_str "${str}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE})
++ _STRING_ESCAPE(_delimiter "${delimiter}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE})
++ SET(_str_list "")
++ SET(_token_count 1)
++
++ WHILE(NOT _token_count EQUAL _max_tokens)
++ STRING_SPLIT_2(_token _str "${_delimiter}" "${_str}")
++ #MESSAGE("_token_count=${_token_count} _max_tokens=${_max_tokens} _token=${_token} _str=${_str}")
++ MATH(EXPR _token_count ${_token_count}+1)
++ LIST(APPEND _str_list "${_token}")
++ IF("${_str}" STREQUAL "")
++ ## No more tokens
++ BREAK()
++ ENDIF("${_str}" STREQUAL "")
++ ENDWHILE(NOT _token_count EQUAL _max_tokens)
++
++ IF(NOT "x${_str}" STREQUAL "x")
++ ## Append last part
++ LIST(APPEND _str_list "${_str}")
++ ENDIF(NOT "x${_str}" STREQUAL "x")
++
++ # Unencoding
++ _STRING_UNESCAPE(${var} "${_str_list}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE})
++ #MESSAGE("***STRING_SPLIT: tokens=${${var}}")
++ ENDMACRO(STRING_SPLIT var delimiter str)
++
++ENDIF(NOT DEFINED _MANAGE_STRING_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageTarget.cmake
+@@ -0,0 +1,40 @@
++# - Modules for managing targets and outputs.
++#
++# Defines following macros:
++# ADD_CUSTOM_TARGET_COMMAND(target OUTPUT file1 [file2 ..] COMMAND
++# command1 ...)
++# - Combine ADD_CUSTOM_TARGET and ADD_CUSTOM_COMMAND.
++# Always build when making the target, also specify the output files
++# Arguments:
++# + target: target for this command
++# + file1, file2 ... : Files to be outputted by this command
++# + command1 ... : Command to be run. The rest arguments are same with
++# ADD_CUSTOM_TARGET.
++#
++
++IF(NOT DEFINED _MANAGE_TARGET_CMAKE_)
++ SET(_MANAGE_TARGET_CMAKE_ "DEFINED")
++ MACRO(ADD_CUSTOM_TARGET_COMMAND target OUTPUT)
++ SET(_outputFileList "")
++ SET(_optionList "")
++ SET(_outputFileMode 1)
++ FOREACH(_t ${ARGN})
++ IF(_outputFileMode)
++ IF(_t STREQUAL "COMMAND")
++ SET(_outputFileMode 0)
++ LIST(APPEND _optionList "${_t}")
++ ELSE(_t STREQUAL "COMMAND")
++ LIST(APPEND _outputFileList "${_t}")
++ ENDIF(_t STREQUAL "COMMAND")
++ ELSE(_outputFileMode)
++ LIST(APPEND _optionList "${_t}")
++ ENDIF(_outputFileMode)
++ ENDFOREACH(_t ${ARGN})
++ #MESSAGE("ADD_CUSTOM_TARGET(${target} ${_optionList})")
++ ADD_CUSTOM_TARGET(${target} ${_optionList})
++ #MESSAGE("ADD_CUSTOM_COMMAND(OUTPUT ${_outputFileList} ${_optionList})")
++ ADD_CUSTOM_COMMAND(OUTPUT ${_outputFileList} ${_optionList})
++ ENDMACRO(ADD_CUSTOM_TARGET_COMMAND)
++
++ENDIF(NOT DEFINED _MANAGE_TARGET_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageTranslation.cmake
+@@ -0,0 +1,305 @@
++# - Software Translation support
++# This module supports software translation by:
++# 1) Creates gettext related targets.
++# 2) Communicate to Zanata servers.
++#
++# Defines following targets:
++# + translations: Make the translation files.
++# This target itself does nothing but provide a target for others to
++# depend on.
++# If macro MANAGE_GETTEXT is used, then it depends on the target gmo_files.
++#
++# Defines following variables:
++# + XGETTEXT_OPTIONS_C: Usual xgettext options for C programs.
++#
++# Defines following macros:
++# MANAGE_GETTEXT [ALL] SRCS src1 [src2 [...]]
++# [LOCALES locale1 [locale2 [...]]]
++# [POTFILE potfile]
++# [XGETTEXT_OPTIONS xgettextOpt]]
++# )
++# - Provide Gettext support like pot file generation and
++# gmo file generation.
++# You can specify supported locales with LOCALES ...
++# or omit the locales to use all the po files.
++#
++# Arguments:
++# + ALL: (Optional) make target "all" depends on gettext targets.
++# + SRCS src1 [src2 [...]]: File list of source code that contains msgid.
++# + LOCALES locale1 [local2 [...]]:(optional) Locale list to be generated.
++# Currently, only the format: lang_Region (such as fr_FR) is supported.
++# + POTFILE potFile: (optional) pot file to be referred.
++# Default: ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pot
++# + XGETTEXT_OPTIONS xgettextOpt: (optional) xgettext_options.
++# Default: ${XGETTEXT_OPTIONS_C}
++# Defines following variables:
++# + GETTEXT_MSGMERGE_CMD: the full path to the msgmerge tool.
++# + GETTEXT_MSGFMT_CMD: the full path to the msgfmt tool.
++# + XGETTEXT_CMD: the full path to the xgettext.
++# Targets:
++# + pot_file: Generate the pot_file.
++# + gmo_files: Converts input po files into the binary output mo files.
++#
++# MANAGE_ZANATA(serverUrl [YES])
++# - Use Zanata (was flies) as translation service.
++# Arguments:
++# + serverUrl: The URL of Zanata server
++# + YES: Assume yes for all questions.
++# Reads following variables:
++# + ZANATA_XML_FILE: Path to zanata.xml
++# Default:${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml
++# + ZANATA_INI_FILE: Path to zanata.ini
++# Default:${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml
++# + ZANATA_PUSH_OPTIONS: Options for zanata push
++# + ZANATA_PULL_OPTIONS: Options for zanata pull
++# Targets:
++# + zanata_project_create: Create project with PROJECT_NAME in zanata
++# server.
++# + zanata_version_create: Create version PRJ_VER in zanata server.
++# + zanata_push: Push source messages to zanata server
++# + zanata_push_trans: Push source messages and translations to zanata server.
++# + zanata_pull: Pull translations from zanata server.
++#
++
++
++IF(NOT DEFINED _MANAGE_TRANSLATION_CMAKE_)
++ SET(_MANAGE_TRANSLATION_CMAKE_ "DEFINED")
++ SET(XGETTEXT_OPTIONS_C
++ --language=C --keyword=_ --keyword=N_ --keyword=C_:1c,2 --keyword=NC_:1c,2 -s
++ --package-name=${PROJECT_NAME} --package-version=${PRJ_VER})
++ SET(MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS "--indent" "--update" "--backup=none" CACHE STRING "msgmerge options")
++ SET_DIRECTORY_PROPERTIES(PROPERTIES CLEAN_NO_CUSTOM "1")
++
++ INCLUDE(ManageMessage)
++ IF(NOT TARGET translations)
++ ADD_CUSTOM_TARGET(translations
++ COMMENT "Making translations"
++ )
++ ENDIF(NOT TARGET translations)
++
++ #========================================
++ # GETTEXT support
++
++ MACRO(MANAGE_GETTEXT_INIT)
++ FIND_PROGRAM(XGETTEXT_CMD xgettext)
++ IF(XGETTEXT_CMD STREQUAL "XGETTEXT_CMD-NOTFOUND")
++ SET(_gettext_dependency_missing 1)
++ M_MSG(${M_OFF} "xgettext not found! gettext support disabled.")
++ ENDIF(XGETTEXT_CMD STREQUAL "XGETTEXT_CMD-NOTFOUND")
++
++ FIND_PROGRAM(GETTEXT_MSGMERGE_CMD msgmerge)
++ IF(GETTEXT_MSGMERGE_CMD STREQUAL "GETTEXT_MSGMERGE_CMD-NOTFOUND")
++ SET(_gettext_dependency_missing 1)
++ M_MSG(${M_OFF} "msgmerge not found! gettext support disabled.")
++ ENDIF(GETTEXT_MSGMERGE_CMD STREQUAL "GETTEXT_MSGMERGE_CMD-NOTFOUND")
++
++ FIND_PROGRAM(GETTEXT_MSGFMT_CMD msgfmt)
++ IF(GETTEXT_MSGFMT_CMD STREQUAL "GETTEXT_MSGFMT_CMD-NOTFOUND")
++ SET(_gettext_dependency_missing 1)
++ M_MSG(${M_OFF} "msgfmt not found! gettext support disabled.")
++ ENDIF(GETTEXT_MSGFMT_CMD STREQUAL "GETTEXT_MSGFMT_CMD-NOTFOUND")
++
++ ENDMACRO(MANAGE_GETTEXT_INIT)
++
++ FUNCTION(MANAGE_GETTEXT)
++ SET(_gettext_dependency_missing 0)
++ MANAGE_GETTEXT_INIT()
++ IF(NOT _gettext_dependency_missing)
++ SET(_stage "")
++ SET(_all "")
++ SET(_srcList "")
++ SET(_srcList_abs "")
++ SET(_localeList "")
++ SET(_potFile "")
++ SET(_xgettext_option_list "")
++ FOREACH(_arg ${ARGN})
++ IF(_arg STREQUAL "ALL")
++ SET(_all "ALL")
++ ELSEIF(_arg STREQUAL "SRCS")
++ SET(_stage "SRCS")
++ ELSEIF(_arg STREQUAL "LOCALES")
++ SET(_stage "LOCALES")
++ ELSEIF(_arg STREQUAL "XGETTEXT_OPTIONS")
++ SET(_stage "XGETTEXT_OPTIONS")
++ ELSEIF(_arg STREQUAL "POTFILE")
++ SET(_stage "POTFILE")
++ ELSE(_arg STREQUAL "ALL")
++ IF(_stage STREQUAL "SRCS")
++ FILE(RELATIVE_PATH _relFile ${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/${_arg})
++ LIST(APPEND _srcList ${_relFile})
++ GET_FILENAME_COMPONENT(_absPoFile ${_arg} ABSOLUTE)
++ LIST(APPEND _srcList_abs ${_absPoFile})
++ ELSEIF(_stage STREQUAL "LOCALES")
++ LIST(APPEND _localeList ${_arg})
++ ELSEIF(_stage STREQUAL "XGETTEXT_OPTIONS")
++ LIST(APPEND _xgettext_option_list ${_arg})
++ ELSEIF(_stage STREQUAL "POTFILE")
++ SET(_potFile "${_arg}")
++ ELSE(_stage STREQUAL "SRCS")
++ M_MSG(${M_WARN} "MANAGE_GETTEXT: not recognizing arg ${_arg}")
++ ENDIF(_stage STREQUAL "SRCS")
++ ENDIF(_arg STREQUAL "ALL")
++ ENDFOREACH(_arg ${ARGN})
++
++ # Default values
++ IF(_xgettext_option_list STREQUAL "")
++ SET(_xgettext_option_list ${XGETTEXT_OPTIONS_C})
++ ENDIF(_xgettext_option_list STREQUAL "")
++
++ IF(_potFile STREQUAL "")
++ SET(_potFile "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pot")
++ ENDIF(_potFile STREQUAL "")
++
++ IF(NOT _localeList)
++ FILE(GLOB _poFiles "*.po")
++ FOREACH(_poFile ${_poFiles})
++ GET_FILENAME_COMPONENT(_locale "${_poFile}" NAME_WE)
++ LIST(APPEND _localeList "${_locale}")
++ ENDFOREACH(_poFile ${_poFiles})
++ ENDIF(NOT _localeList)
++
++ M_MSG(${M_INFO2} "XGETTEXT=${XGETTEXT_CMD} ${_xgettext_option_list} -o ${_potFile} ${_srcList}")
++ ADD_CUSTOM_COMMAND(OUTPUT ${_potFile}
++ COMMAND ${XGETTEXT_CMD} ${_xgettext_option_list} -o ${_potFile} ${_srcList}
++ DEPENDS ${_srcList_abs}
++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
++ COMMENT "Extract translatable messages to ${_potFile}"
++ )
++
++ ADD_CUSTOM_TARGET(pot_file ${_all}
++ DEPENDS ${_potFile}
++ )
++
++ ### Generating gmo files
++ SET(_gmoFileList "")
++ SET(_absGmoFileList "")
++ SET(_absPoFileList "")
++ GET_FILENAME_COMPONENT(_potBasename ${_potFile} NAME_WE)
++ GET_FILENAME_COMPONENT(_potDir ${_potFile} PATH)
++ GET_FILENAME_COMPONENT(_absPotFile ${_potFile} ABSOLUTE)
++ GET_FILENAME_COMPONENT(_absPotDir ${_absPotFile} PATH)
++ FOREACH(_locale ${_localeList})
++ SET(_absGmoFile ${_absPotDir}/${_locale}.gmo)
++ SET(_absPoFile ${_absPotDir}/${_locale}.po)
++
++ ADD_CUSTOM_COMMAND(OUTPUT ${_absPoFile}
++ COMMAND ${GETTEXT_MSGMERGE_CMD}
++ ${MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS} ${_absPoFile} ${_potFile}
++ DEPENDS ${_potFile}
++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
++ COMMENT "${GETTEXT_MSGMERGE_CMD} ${MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS} ${_absPoFile} ${_potFile}"
++ )
++
++ ADD_CUSTOM_COMMAND(OUTPUT ${_absGmoFile}
++ COMMAND ${GETTEXT_MSGFMT_CMD} -o ${_absGmoFile} ${_absPoFile}
++ DEPENDS ${_absPoFile}
++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
++ COMMENT "${GETTEXT_MSGFMT_CMD} -o ${_absGmoFile} ${_absPoFile}"
++ )
++
++ #MESSAGE("_absPoFile=${_absPoFile} _absPotDir=${_absPotDir} _lang=${_lang} curr_bin=${CMAKE_CURRENT_BINARY_DIR}")
++ INSTALL(FILES ${_absGmoFile} DESTINATION share/locale/${_locale}/LC_MESSAGES RENAME ${_potBasename}.mo)
++ LIST(APPEND _absGmoFileList ${_absGmoFile})
++ LIST(APPEND _absPoFileList ${_absPoFile})
++ ENDFOREACH(_locale ${_localeList})
++ SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES "${_absGmoFileList};${_potFile}" )
++
++ SET(MANAGE_TRANSLATION_GETTEXT_PO_FILES ${_absPoFileList} CACHE STRING "PO files")
++
++ ADD_CUSTOM_TARGET(gmo_files ${_all}
++ DEPENDS ${_absGmoFileList}
++ COMMENT "Generate gmo files for translation"
++ )
++
++ ADD_DEPENDENCIES(translations gmo_files)
++ ENDIF(NOT _gettext_dependency_missing)
++ ENDFUNCTION(MANAGE_GETTEXT)
++
++
++ #========================================
++ # ZANATA support
++ MACRO(MANAGE_ZANATA serverUrl)
++ SET(ZANATA_SERVER "${serverUrl}")
++ FIND_PROGRAM(ZANATA_CMD zanata)
++ SET(_manage_zanata_dependencies_missing 0)
++ IF(ZANATA_CMD STREQUAL "ZANATA_CMD-NOTFOUND")
++ SET(_manage_zanata_dependencies_missing 1)
++ M_MSG(${M_OFF} "zanata (python client) not found! zanata support disabled.")
++ ENDIF(ZANATA_CMD STREQUAL "ZANATA_CMD-NOTFOUND")
++
++ SET(ZANATA_XML_FILE "${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml" CACHE FILEPATH "zanata.xml")
++ IF(NOT EXISTS "${ZANATA_XML_FILE}")
++ SET(_manage_zanata_dependencies_missing 1)
++ M_MSG(${M_OFF} "zanata.xml is not found! Zanata support disabled.")
++ ENDIF(NOT EXISTS "${ZANATA_XML_FILE}")
++
++ SET(ZANATA_INI_FILE "$ENV{HOME}/.config/zanata.ini" CACHE FILEPATH "zanata.ni")
++ IF(NOT EXISTS "${ZANATA_INI_FILE}")
++ SET(_manage_zanata_dependencies_missing 1)
++ M_MSG(${M_OFF} "zanata.ini is not found! Zanata support disabled.")
++ ENDIF(NOT EXISTS "${ZANATA_INI_FILE}")
++
++ IF(NOT _manage_zanata_dependencies_missing)
++ SET(_zanata_args --url "${ZANATA_SERVER}"
++ --project-config "${ZANATA_XML_FILE}" --user-config "${ZANATA_INI_FILE}")
++
++ # Parsing arguments
++ SET(_yes "")
++ FOREACH(_arg ${ARGN})
++ IF(_arg STREQUAL "YES")
++ SET(_yes "yes" "|")
++ ENDIF(_arg STREQUAL "YES")
++ ENDFOREACH(_arg ${ARGN})
++
++ ADD_CUSTOM_TARGET(zanata_project_create
++ COMMAND ${ZANATA_CMD} project create ${PROJECT_NAME} ${_zanata_args}
++ --project-name "${PROJECT_NAME}" --project-desc "${PRJ_SUMMARY}"
++ COMMENT "Creating project ${PROJECT_NAME} on Zanata server ${serverUrl}"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_TARGET(zanata_version_create
++ COMMAND ${ZANATA_CMD} version create
++ ${PRJ_VER} ${_zanata_args} --project-id "${PROJECT_NAME}"
++ COMMENT "Creating version ${PRJ_VER} on Zanata server ${serverUrl}"
++ VERBATIM
++ )
++
++ SET(_po_files_depend "")
++ IF(MANAGE_TRANSLATION_GETTEXT_PO_FILES)
++ SET(_po_files_depend "DEPENDS" ${MANAGE_TRANSLATION_GETTEXT_PO_FILES})
++ ENDIF(MANAGE_TRANSLATION_GETTEXT_PO_FILES)
++ # Zanata push
++ ADD_CUSTOM_TARGET(zanata_push
++ COMMAND ${_yes}
++ ${ZANATA_CMD} push ${_zanata_args} ${ZANATA_PUSH_OPTIONS}
++ ${_po_files_depend}
++ COMMENT "Push source messages to zanata server ${ZANATA_SERVER}"
++ VERBATIM
++ )
++ ADD_DEPENDENCIES(zanata_push pot_file)
++
++ # Zanata push with translation
++ ADD_CUSTOM_TARGET(zanata_push_trans
++ COMMAND ${_yes}
++ ${ZANATA_CMD} push ${_zanata_args} --push-type both ${ZANATA_PUSH_OPTIONS}
++ ${_po_files_depend}
++ COMMENT "Push source messages and translations to zanata server ${ZANATA_SERVER}"
++ VERBATIM
++ )
++
++ ADD_DEPENDENCIES(zanata_push_trans pot_file)
++
++ # Zanata pull
++ ADD_CUSTOM_TARGET(zanata_pull
++ COMMAND ${_yes}
++ ${ZANATA_CMD} pull ${_zanata_args} ${ZANATA_PULL_OPTIONS}
++ COMMENT "Pull translations fro zanata server ${ZANATA_SERVER}"
++ VERBATIM
++ )
++
++ ENDIF(NOT _manage_zanata_dependencies_missing)
++ ENDMACRO(MANAGE_ZANATA serverUrl)
++
++ENDIF(NOT DEFINED _MANAGE_TRANSLATION_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageUninstall.cmake
+@@ -0,0 +1,28 @@
++# - Uninstall target.
++# Use this module to provide uninstall target.
++#
++# Define following targets
++# uninstall: For uninstalling the package.
++#
++
++IF(NOT DEFINED _MANAGE_UNINSTALL_CMAKE_)
++ SET(_MANAGE_UNINSTALL_CMAKE_ "DEFINED")
++ SET(CMAKE_UNINSTALL_IN_SEARCH_PATH ${CMAKE_MODULE_PATH} ${CMAKE_ROOT}/Modules ${CMAKE_SOURCE_DIR} ${CMAKE_SOURCE_DIR}/Modules)
++ FIND_FILE(CMAKE_UNINSTALL_IN cmake_uninstall.cmake.in
++ PATHS ${CMAKE_UNINSTALL_IN_SEARCH_PATH})
++
++ # MESSAGE("CMAKE_UNINSTALL_IN=${CMAKE_UNINSTALL_IN}")
++ IF(CMAKE_UNINSTALL_IN STREQUAL "CMAKE_UNINSTALL_IN-NOTFOUND")
++ MESSAGE(FATAL_ERROR "Cannot find cmake_uninstall.cmake.in in"
++ "${CMAKE_UNINSTALL_IN_SEARCH_PATH}")
++ ENDIF(CMAKE_UNINSTALL_IN STREQUAL "CMAKE_UNINSTALL_IN-NOTFOUND")
++
++ CONFIGURE_FILE("${CMAKE_UNINSTALL_IN}"
++ "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
++ IMMEDIATE @ONLY)
++
++ ADD_CUSTOM_TARGET(uninstall
++ "${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
++ )
++ENDIF(NOT DEFINED _MANAGE_UNINSTALL_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageUpload.cmake
+@@ -0,0 +1,184 @@
++# - Upload files to hosting services.
++# You can either use sftp, scp or supply custom command for upload.
++# The custom command should be in following format:
++# cmd [OPTIONS] [url]
++#
++# This module defines following macros:
++# MACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias [uploadOptions])
++# - Make a target for upload files.
++# If <varPrefix>_HOST_ALIAS is not empty, the target is
++# upload_${${varPrefix}_HOST_ALIAS}_${fileAlias}, otherwise, the target is
++# upload_${${varPrefix}_HOST_ALIAS}_${fileAlias}
++# Arguments:
++# + varPrefix: Variable prefix
++# + fileAlias: File alias which will be used as part of target name
++# + uploadOptions: Options for the upload command
++# Reads following variables:
++# + <varPrefix>_CMD: Upload command
++# + <varPrefix>_DEPENDS: Extra files that the upload load target depends on.
++# + <varPrefix>_HOST_ALIAS: (Optional) Host alias which will be used as part of target name.
++# + <varPrefix>_HOST_URL: Host URL
++# + <varPrefix>_REMOTE_DIR: (Optional) Remote dir/
++# + <varPrefix>_UPLOAD_FILES: Files to be uploaded. The target depends on these files.
++# + <varPrefix>_UPLOAD_OPTIONS: Options for upload command.
++# + <varPrefix>_USER: (Optional) User for uploading
++#
++# This module defines following macros:
++# MANAGE_UPLOAD_CMD(cmd fileAlias [USER user] [HOST_URL hostUrl]
++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir]
++# [UPLOAD_OPTIONS options] [DEPENDS files])
++# - Make a upload target for a upload command
++# Arguments:
++# + cmd: Command to do the
++# + fileAlias: File alias which will be used as part of target name
++# + DEPENDS files: Extra files that the upload load target depends on.
++# + HOST_ALIAS hostAlias: (Optional) Host alias which will be used as part of target name.
++# + HOST_URL hostUrl: Host URL
++# + REMOTE_DIR remoteDir: (Optional) Remote dir/
++# + UPLOAD_FILES files : Files to be uploaded. The target depends on these files.
++# + UPLOAD_OPTIONS options: Options for upload command.
++# + USER user: (Optional) User for uploading
++#
++# MANAGE_UPLOAD_SFTP(fileAlias [USER user] [HOST_URL hostUrl]
++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir]
++# [UPLOAD_OPTIONS options] [DEPENDS files])
++# - Make a upload target for sftp
++# Arguments: See section MANAGE_UPLOAD_CMD
++#
++# MANAGE_UPLOAD_SCP(fileAlias [USER user] [HOST_URL hostUrl]
++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir]
++# [UPLOAD_OPTIONS options] [DEPENDS files])
++# - Make a upload target for scp
++# Arguments: See section MANAGE_UPLOAD_CMD
++#
++# MANAGE_UPLOAD_FEDORAHOSTED(fileAlias [USER user]
++# [UPLOAD_FILES files] [REMOTE_DIR remoteDir]
++# [UPLOAD_OPTIONS options] [DEPENDS files])
++# - Make a upload target for uploading to FedoraHosted
++# Arguments: See section MANAGE_UPLOAD_CMD
++#
++# MANAGE_UPLOAD_SOURCEFORGE(fileAlias [USER user]
++# [UPLOAD_FILES files] [REMOTE_DIR remoteDir]
++# [UPLOAD_OPTIONS options] [DEPENDS files])
++# - Make a upload target for uploading to SourceForge
++# Arguments: See section MANAGE_UPLOAD_CMD
++#
++#
++
++IF(NOT DEFINED _MANAGE_UPLOAD_CMAKE_)
++ SET(_MANAGE_UPLOAD_CMAKE_ "DEFINED")
++ INCLUDE(ManageMessage)
++
++ # MANAGE_UPLOAD_GET_OPTIONS cmd [USER user] [HOST_URL hostUrl] [HOST_ALIAS hostAlias]
++ # [UPLOAD_FILES files] [REMOTE_DIR remoteDir] [UPLOAD_OPTIONS sftpOptions] [DEPENDS files]
++
++ MACRO(_MANAGE_UPLOAD_GET_OPTIONS varList varPrefix)
++ SET(_optName "") ## OPTION name
++ SET(_opt "") ## Variable that hold option values
++ SET(VALID_OPTIONS "USER" "HOST_URL" "HOST_ALIAS" "UPLOAD_FILES" "REMOTE_DIR" "UPLOAD_OPTIONS" "DEPENDS")
++ FOREACH(_arg ${ARGN})
++ LIST(FIND VALID_OPTIONS "${_arg}" _optIndex)
++ IF(_optIndex EQUAL -1)
++ IF(NOT _optName STREQUAL "")
++ ## Append to existing variable
++ LIST(APPEND ${_opt} "${_arg}")
++ SET(${_opt} "${_opt}" PARENT_SCOPE)
++ ENDIF(NOT _optName STREQUAL "")
++ ELSE(_optIndex EQUAL -1)
++ ## Obtain option name and variable name
++ LIST(GET VALID_OPTIONS ${_optIndex} _optName)
++ SET(_opt "${varPrefix}_${_optName}")
++
++ ## If variable is not in varList, then set cache and add it to varList
++ LIST(FIND ${varList} "${_opt}" _varIndex)
++ IF(_varIndex EQUAL -1)
++ SET(${_opt} "" PARENT_SCOPE)
++ LIST(APPEND ${varList} "${_opt}")
++ ENDIF(_varIndex EQUAL -1)
++ ENDIF(_optIndex EQUAL -1)
++ ENDFOREACH(_arg ${ARGN})
++ ENDMACRO(_MANAGE_UPLOAD_GET_OPTIONS varPrefix varList)
++
++ MACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias)
++ SET(_target "upload")
++ IF(NOT "${varPrefix}_HOST_ALIAS" STREQUAL "")
++ SET(_target "${_target}_${${varPrefix}_HOST_ALIAS}")
++ ENDIF(NOT "${varPrefix}_HOST_ALIAS" STREQUAL "")
++ SET(_target "${_target}_${fileAlias}")
++
++ ## Determine url for upload
++ IF(NOT "${varPrefix}_HOST_URL" STREQUAL "")
++ IF("${varPrefix}_USER" STREQUAL "")
++ SET(UPLOAD_URL "${${varPrefix}_USER}@${${varPrefix}_HOST_URL}")
++ ELSE("${varPrefix}_USER" STREQUAL "")
++ SET(UPLOAD_URL "${${varPrefix}_HOST_URL}")
++ ENDIF("${varPrefix}_USER" STREQUAL "")
++ ELSE(NOT "${varPrefix}_HOST_URL" STREQUAL "")
++ SET(UPLOAD_URL "")
++ ENDIF(NOT "${varPrefix}_HOST_URL" STREQUAL "")
++
++ IF(NOT "${varPrefix}_REMOTE_DIR" STREQUAL "")
++ SET(UPLOAD_URL "${UPLOAD_URL}:${${varPrefix}_REMOTE_DIR}")
++ ENDIF(NOT "${varPrefix}_REMOTE_DIR" STREQUAL "")
++
++ ADD_CUSTOM_TARGET(${_target}
++ COMMAND ${${varPrefix}_UPLOAD_CMD} ${${varPrefix}_UPLOAD_OPTIONS} ${ARGN} ${UPLOAD_URL}
++ DEPENDS ${${varPrefix}_UPLOAD_FILES} ${${varPrefix}_DEPENDS}
++ ${_DEPENDS}
++ COMMENT "${${varPrefix}_HOST_ALIAS} uploading ${fileAlias}."
++ VERBATIM
++ )
++ ENDMACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias)
++
++ FUNCTION(MANAGE_UPLOAD_CMD cmd fileAlias)
++ FIND_PROGRAM(UPLOAD_CMD "${cmd}")
++ IF(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with ${cmd} disabled.")
++ ELSE(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND")
++ _MANAGE_UPLOAD_GET_OPTIONS(varList "upload_${fileAlias}" ${ARGN})
++ SET(upload_UPLOAD_CMD ${UPLOAD_CMD})
++ MANAGE_UPLOAD_MAKE_TAGET("upload" "${fileAlias}")
++ ENDIF(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND")
++ ENDFUNCTION(MANAGE_UPLOAD_CMD cmd fileAlias)
++
++ FUNCTION(MANAGE_UPLOAD_SFTP fileAlias)
++ MANAGE_UPLOAD_CMD(sftp ${fileAlias} ${ARGN})
++ ENDFUNCTION(MANAGE_UPLOAD_SFTP fileAlias)
++
++ FUNCTION(MANAGE_UPLOAD_SCP fileAlias)
++ MANAGE_UPLOAD_CMD(scp ${fileAlias} ${ARGN})
++ ENDFUNCTION(MANAGE_UPLOAD_SCP fileAlias)
++
++ #MACRO(MANAGE_UPLOAD_GOOGLE_UPLOAD)
++ # FIND_PROGRAM(CURL_CMD curl)
++ # IF(CURL_CMD STREQUAL "CURL_CMD-NOTFOUND")
++ # MESSAGE(FATAL_ERROR "Need curl to perform google upload")
++ # ENDIF(CURL_CMD STREQUAL "CURL_CMD-NOTFOUND")
++ #ENDMACRO(MANAGE_UPLOAD_GOOGLE_UPLOAD)
++ FUNCTION(MANAGE_UPLOAD_FEDORAHOSTED fileAlias)
++ FIND_PROGRAM(fedorahosted_${fileAlias}_UPLOAD_CMD "scp")
++ IF(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with fedorahost disabled.")
++ ELSE(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND")
++ _MANAGE_UPLOAD_GET_OPTIONS(varList "fedorahosted_${fileAlias}" HOST_ALIAS "fedorahosted"
++ HOST_URL "fedorahosted.org" REMOTE_DIR "${PROJECT_NAME}" ${ARGN})
++ MANAGE_UPLOAD_MAKE_TARGET("fedorahosted_${fileAlias}" "${fileAlias}" ${fedorahosted_${fileAlias}_UPLOAD_FILES})
++ ENDIF(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND")
++ ENDFUNCTION(MANAGE_UPLOAD_FEDORAHOSTED fileAlias)
++
++ FUNCTION(MANAGE_UPLOAD_SOURCEFORGE_FILE_RELEASE fileAlias)
++ FIND_PROGRAM(sourceforge_${fileAlias}_UPLOAD_CMD "sftp")
++ IF(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND")
++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with sourceforge disabled.")
++ ELSE(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND")
++ _MANAGE_UPLOAD_GET_OPTIONS(varList "sourceforge_${fileAlias}" ${ARGN} HOST_ALIAS "sourceforge"
++ HOST_URL "frs.sourceforge.net")
++ IF(sourceforge_${fileAlias}_USER)
++ SET(sourceforge_${fileAlias}_REMOTE_DIR "/home/frs/project/${PROJECT_NAME}")
++ ENDIF(sourceforge_${fileAlias}_USER)
++ SET("sourceforge_${fileAlias}_UPLOAD_CMD" "sftp")
++ MANAGE_UPLOAD_MAKE_TARGET("sourceforge_${fileAlias}" "${fileAlias}")
++ ENDIF(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND")
++ ENDFUNCTION(MANAGE_UPLOAD_SOURCEFORGE_FILE_RELEASE fileAlias)
++ENDIF(NOT DEFINED _MANAGE_UPLOAD_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageVariable.cmake
+@@ -0,0 +1,326 @@
++# - Get or set variables from various sources.
++#
++# Includes:
++# ManageString
++#
++# Included by:
++# ManageVersion
++# PackRPM
++#
++# Defines following functions:
++# SETTING_STRING_GET_VARIABLE(var value str [NOUNQUOTE] [NOREPLACE] [setting_sign])
++# - Get a variable and a value from a setting in string format.
++# i.e. VAR=Value
++# pattern. '#' is used for comment.
++# * Parameters:
++# + var: Variable name extracted from str.
++# + value: Value extracted from str
++# + str: String to be extracted variable and value from.
++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string.
++# + NOREPLACE (Optional) Without this parameter, this macro replaces
++# previous defined variables, use NOREPLACE to prevent this.
++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons.
++# + setting_sign: (Optional) The symbol that separate attribute name and its value.
++# Default value: "="
++#
++# Defines following macros:
++# COMMAND_OUTPUT_TO_VARIABLE(var cmd)
++# - Store command output to a variable, without new line characters (\n and \r).
++# This macro is suitable for command that output one line result.
++# Note that the var will be set to ${var_name}-NOVALUE if cmd does not have
++# any output.
++# * Parameters:
++# var: A variable that stores the result.
++# cmd: A command.
++#
++# SETTING_FILE_GET_VARIABLES_PATTERN(var attr_pattern setting_file [NOUNQUOTE] [NOREPLACE]
++# [NOESCAPE_SEMICOLON] [setting_sign])
++# - Get variable values from a setting file if their names matches given
++# pattern. '#' is used for comment.
++# * Parameters:
++# + var: Variable to store the attribute value.
++# Set to "" to set attribute under matched variable name.
++# + attr_pattern: Regex pattern of variable name.
++# + setting_file: Setting filename.
++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string.
++# + NOREPLACE (Optional) Without this parameter, this macro replaces
++# previous defined variables, use NOREPLACE to prevent this.
++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons.
++# + setting_sign: (Optional) The symbol that separate attribute name and its value.
++# Default value: "="
++#
++# SETTING_FILE_GET_ALL_VARIABLES(setting_file [NOUNQUOTE] [NOREPLACE]
++# [NOESCAPE_SEMICOLON] [setting_sign])
++# - Get all variable values from a setting file.
++# It is equivalent to:
++# SETTING_FILE_GET_VARIABLES_PATTERN("" "[A-Za-z_][A-Za-z0-9_]*"
++# "${setting_file}" ${ARGN})
++# '#' is used to comment out setting.
++# * Parameters:
++# + setting_file: Setting filename.
++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string.
++# + NOREPLACE (Optional) Without this parameter, this macro replaces
++# previous defined variables, use NOREPLACE to prevent this.
++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons.
++# + setting_sign: (Optional) The symbol that separate attribute name and its value.
++# Default value: "="
++#
++# SETTING_FILE_GET_VARIABLE(var attr_name setting_file [NOUNQUOTE] [NOREPLACE]
++# [NOESCAPE_SEMICOLON] [setting_sign])
++# - Get a variable value from a setting file.
++# It is equivalent to:
++# SETTING_FILE_GET_VARIABLES_PATTERN(${var} "${attr_name}"
++# "${setting_file}" ${ARGN})
++# '#' is used to comment out setting.
++# * Parameters:
++# + var: Variable to store the attribute value.
++# + attr_name: Name of the variable.
++# + setting_file: Setting filename.
++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string.
++# + NOREPLACE (Optional) Without this parameter, this macro replaces
++# previous defined variables, use NOREPLACE to prevent this.
++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons.
++# + setting_sign: (Optional) The symbol that separate attribute name and its value.
++# Default value: "="
++#
++# SETTING_FILE_GET_ALL_VARIABLES(setting_file [NOUNQUOTE] [NOREPLACE]
++# [NOESCAPE_SEMICOLON] [setting_sign])
++# - Get all attribute values from a setting file.
++# '#' is used to comment out setting.
++# * Parameters:
++# + setting_file: Setting filename.
++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string.
++# + NOREPLACE (Optional) Without this parameter, this macro replaces
++# previous defined variables, use NOREPLACE to prevent this.
++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons.
++# + setting_sign: (Optional) The symbol that separate attribute name and its value.
++# Default value: "="
++#
++# GET_ENV(var default_value [env])
++# - Get the value of a environment variable, or use default
++# if the environment variable does not exist or is empty.
++# * Parameters:
++# var: Variable to be set
++# default_value: Default value of the var
++# env: (Optional) The name of environment variable. Only need if different from var.
++#
++# SET_VAR(var untrimmed_value)
++# - Trim an set the value to a variable.
++# * Parameters:
++# var: Variable to be set
++# untrimmed_value: Untrimmed values that may have space, \t, \n, \r in the front or back of the string.
++#
++
++IF(NOT DEFINED _MANAGE_VARIABLE_CMAKE_)
++ SET(_MANAGE_VARIABLE_CMAKE_ "DEFINED")
++ INCLUDE(ManageString)
++
++ MACRO(COMMAND_OUTPUT_TO_VARIABLE var cmd)
++ EXECUTE_PROCESS(
++ COMMAND ${cmd} ${ARGN}
++ OUTPUT_VARIABLE _cmd_output
++ OUTPUT_STRIP_TRAILING_WHITESPACE
++ )
++ IF(_cmd_output)
++ SET(${var} ${_cmd_output})
++ ELSE(_cmd_output)
++ SET(var "${var}-NOVALUE")
++ ENDIF(_cmd_output)
++ #SET(value ${${var}})
++ #MESSAGE("var=${var} _cmd_output=${_cmd_output} value=|${value}|" )
++ ENDMACRO(COMMAND_OUTPUT_TO_VARIABLE var cmd)
++
++ # This macro is meant to be internal.
++ MACRO(_MANAGE_VARIABLE_SET var value)
++ SET(${var} "${value}")
++ ENDMACRO(_MANAGE_VARIABLE_SET var value)
++
++ # it deals the "encoded" line.
++ FUNCTION(SETTING_STRING_GET_VARIABLE var value str )
++ SET(setting_sign "=")
++ SET(_NOUNQUOTE "")
++ SET(_NOREPLACE "")
++ FOREACH(_arg ${ARGN})
++ IF (${_arg} STREQUAL "NOUNQUOTE")
++ SET(_NOUNQUOTE "NOUNQUOTE")
++ ELSEIF (${_arg} STREQUAL "NOREPLACE")
++ SET(_NOREPLACE "NOREPLACE")
++ ELSE(${_arg} STREQUAL "NOUNQUOTE")
++ SET(setting_sign ${_arg})
++ ENDIF(${_arg} STREQUAL "NOUNQUOTE")
++ ENDFOREACH(_arg ${ARGN})
++
++ STRING_SPLIT(_tokens "${setting_sign}" "${str}" 2)
++ #MESSAGE("_tokens=${_tokens}")
++ SET(_varName "")
++ SET(_val "")
++ FOREACH(_token ${_tokens})
++ #MESSAGE("_varName=${_varName} _token=${_token}")
++ IF(_varName STREQUAL "")
++ SET(_varName "${_token}")
++ ELSE(_varName STREQUAL "")
++ SET(_val "${_token}")
++ ENDIF(_varName STREQUAL "")
++ ENDFOREACH(_token ${_tokens})
++ #MESSAGE("_varName=${_varName} _val=${_val}")
++
++ SET(${var} "${_varName}" PARENT_SCOPE)
++ # Set var when
++ # 1. NOREPLACE is not set, or
++ # 2. var has value already.
++ SET(_setVar 0)
++ IF(_NOREPLACE STREQUAL "")
++ STRING_TRIM(_value "${_val}" ${_NOUNQUOTE})
++ ELSEIF(${var} STREQUAL "")
++ STRING_TRIM(_value "${_val}" ${_NOUNQUOTE})
++ ELSE(_NOREPLACE STREQUAL "")
++ SET(_value "${${var}}")
++ ENDIF(_NOREPLACE STREQUAL "")
++ SET(${value} "${_value}" PARENT_SCOPE)
++ #MESSAGE("_varName=${_varName} _value=${_value}")
++
++ ENDFUNCTION(SETTING_STRING_GET_VARIABLE var str)
++
++ # Internal macro
++ # Similar to STRING_ESCAPE, but read directly from file,
++ # This avoid the variable substitution
++ # Variable escape is enforced.
++ MACRO(FILE_READ_ESCAPE var filename)
++ # '$' is very tricky.
++ # '$' => '#D'
++ GET_FILENAME_COMPONENT(_filename_abs "${filename}" ABSOLUTE)
++ EXECUTE_PROCESS(COMMAND cat ${filename}
++ COMMAND sed -e "s/#/#H/g"
++ COMMAND sed -e "s/[$]/#D/g"
++ COMMAND sed -e "s/;/#S/g"
++ COMMAND sed -e "s/[\\]/#B/g"
++ OUTPUT_VARIABLE _ret
++ OUTPUT_STRIP_TRAILING_WHITESPACE)
++
++ STRING(REGEX REPLACE "\n" ";" _ret "${_ret}")
++ #MESSAGE("_ret=|${_ret}|")
++ SET(${var} "${_ret}")
++ ENDMACRO(FILE_READ_ESCAPE var filename)
++
++ MACRO(SETTING_FILE_GET_VARIABLES_PATTERN var attr_pattern setting_file)
++ IF("${setting_file}" STREQUAL "")
++ M_MSG(${M_FATAL} "SETTING_FILE_GET_VARIABLES_PATTERN: setting_file ${setting_file} is empty")
++ ENDIF("${setting_file}" STREQUAL "")
++ SET(setting_sign "=")
++ SET(_noUnQuoted "")
++ SET(_noEscapeSemicolon "")
++ SET(_noReplace "")
++ SET(_escapeVariable "")
++ FOREACH(_arg ${ARGN})
++ IF (${_arg} STREQUAL "NOUNQUOTE")
++ SET(_noUnQuoted "NOUNQUOTE")
++ ELSEIF (${_arg} STREQUAL "NOREPLACE")
++ SET(_noReplace "NOREPLACE")
++ ELSEIF (${_arg} STREQUAL "NOESCAPE_SEMICOLON")
++ SET(_noEscapeSemicolon "NOESCAPE_SEMICOLON")
++ ELSEIF (${_arg} STREQUAL "ESCAPE_VARIABLE")
++ SET(_escapeVariable "ESCAPE_VARIABLE")
++ ELSE(${_arg} STREQUAL "NOUNQUOTE")
++ SET(setting_sign ${_arg})
++ ENDIF(${_arg} STREQUAL "NOUNQUOTE")
++ ENDFOREACH(_arg)
++
++ # Escape everything to be safe.
++ FILE_READ_ESCAPE(_lines "${setting_file}")
++
++ #STRING_SPLIT(_lines "\n" "${_txt_content}")
++ #MESSAGE("_lines=|${_lines}|")
++ SET(_actual_line "")
++ SET(_join_next 0)
++ FOREACH(_line ${_lines})
++ #MESSAGE("_line=|${_line}|")
++ IF(NOT _line MATCHES "^[ \\t]*#H")
++ # Not a comment line.
++ IF(_join_next EQUAL 1)
++ SET(_actual_line "${_actual_line}${_line}" )
++ ELSE(_join_next EQUAL 1)
++ SET(_actual_line "${_line}")
++ ENDIF(_join_next EQUAL 1)
++ #MESSAGE("_actual_line=|${_actual_line}|")
++
++ IF(_actual_line MATCHES "#B$")
++ #Join the lines that end with \\
++ SET(_join_next 1)
++ STRING(REGEX REPLACE "#B$" "" _actual_line "${_actual_line}")
++ ELSE(_actual_line MATCHES "#B$")
++ SET(_join_next 0)
++ IF(_actual_line MATCHES "[ \\t]*${attr_pattern}[ \\t]*${setting_sign}")
++ #MESSAGE("*** matched_line=|${_actual_line}|")
++ SETTING_STRING_GET_VARIABLE(_attr _value
++ "${_actual_line}" ${setting_sign} ${_noUnQuoted} )
++ #MESSAGE("*** _attr=${_attr} _value=${_value}")
++ IF(_noReplace STREQUAL "" OR NOT DEFINED ${_attr})
++ # Unencoding
++ _STRING_UNESCAPE(_value "${_value}" ${_noEscapeSemicolon} ESCAPE_VARIABLE)
++ IF(_escapeVariable STREQUAL "")
++ # Variable should not be escaped
++ # i.e. need substitution
++ _MANAGE_VARIABLE_SET(_value "${_value}")
++ ENDIF(_escapeVariable STREQUAL "")
++ IF("${var}" STREQUAL "")
++ SET(${_attr} "${_value}")
++ ELSE("${var}" STREQUAL "")
++ SET(${var} "${_value}")
++ ENDIF("${var}" STREQUAL "")
++ ENDIF(_noReplace STREQUAL "" OR NOT DEFINED ${_attr})
++ ENDIF(_actual_line MATCHES "[ \\t]*${attr_pattern}[ \\t]*${setting_sign}")
++
++ ENDIF(_actual_line MATCHES "#B$")
++
++ ENDIF(NOT _line MATCHES "^[ \\t]*#H")
++ ENDFOREACH(_line ${_lines})
++ #SET(${var} "${_value}")
++
++ ENDMACRO(SETTING_FILE_GET_VARIABLES_PATTERN var attr_pattern setting_file)
++
++ MACRO(SETTING_FILE_GET_VARIABLE var attr_name setting_file)
++ SETTING_FILE_GET_VARIABLES_PATTERN(${var} "${attr_name}"
++ "${setting_file}" ${ARGN})
++ ENDMACRO(SETTING_FILE_GET_VARIABLE var attr_name setting_file)
++
++ MACRO(SETTING_FILE_GET_ALL_VARIABLES setting_file)
++ SETTING_FILE_GET_VARIABLES_PATTERN("" "[A-Za-z_][A-Za-z0-9_.]*"
++ "${setting_file}" ${ARGN})
++ ENDMACRO(SETTING_FILE_GET_ALL_VARIABLES setting_file)
++
++ MACRO(GET_ENV var default_value)
++ IF(${ARGC} GREATER 2)
++ SET(_env "${ARGV2}")
++ ELSE(${ARGC} GREATER 2)
++ SET(_env "${var}")
++ ENDIF(${ARGC} GREATER 2)
++
++ IF ("$ENV{${_env}}" STREQUAL "")
++ SET(${var} "${default_value}")
++ ELSE("$ENV{${_env}}" STREQUAL "")
++ SET(${var} "$ENV{${_env}}")
++ ENDIF("$ENV{${_env}}" STREQUAL "")
++ # MESSAGE("Variable ${var}=${${var}}")
++ ENDMACRO(GET_ENV var default_value)
++
++ MACRO(SET_VAR var untrimmedValue)
++ SET(_noUnQuoted "")
++ FOREACH(_arg ${ARGN})
++ IF (${_arg} STREQUAL "NOUNQUOTE")
++ SET(_noUnQuoted "NOUNQUOTE")
++ ENDIF(${_arg} STREQUAL "NOUNQUOTE")
++ ENDFOREACH(_arg ${ARGN})
++ #MESSAGE("untrimmedValue=${untrimmedValue}")
++ IF ("${untrimmedValue}" STREQUAL "")
++ SET(${var} "")
++ ELSE("${untrimmedValue}" STREQUAL "")
++ STRING_TRIM(trimmedValue "${untrimmedValue}" ${_noUnQuoted})
++ #MESSAGE("***SET_VAR: trimmedValue=${trimmedValue}")
++ SET(${var} "${trimmedValue}")
++ ENDIF("${untrimmedValue}" STREQUAL "")
++ #SET(value "${${var}}")
++ #MESSAGE("***SET_VAR: ${var}=|${value}|")
++ ENDMACRO(SET_VAR var untrimmedValue)
++
++ENDIF(NOT DEFINED _MANAGE_VARIABLE_CMAKE_)
++
+--- /dev/null
++++ b/Modules/ManageVersion.cmake
+@@ -0,0 +1,137 @@
++# - Modules for manipulate version and ChangeLogs
++#
++# Includes:
++# ManageVariable
++# DateTimeFormat
++#
++# Included by:
++# PackSource
++#
++# Defines following functions:
++# RELEASE_NOTES_READ_FILE([releaseFile])
++# - Load release file information.
++# Arguments:
++# + releaseFile: (Optional) release file to be read.
++# This file should contain following definition:
++# + PRJ_VER: Release version.
++# + SUMMARY: Summary of the release. Will be output as CHANGE_SUMMARY.
++# and a [Changes] section tag, below which listed the change in the
++# release.
++# Default:RELEASE-NOTES.txt
++# This macro reads or define following variables:
++# + RELEASE_TARGETS: Sequence of release targets.
++# This macro outputs following files:
++# + ChangeLog: Log of changes.
++# Depends on ChangeLog.prev and releaseFile.
++# This macro sets following variables:
++# + PRJ_VER: Release version.
++# + CHANGE_SUMMARY: Summary of changes.
++# + CHANGELOG_ITEMS: Lines below the [Changes] tag.
++# + RELEASE_NOTES_FILE: The loaded release file.
++# + PRJ_DOC_DIR: Documentation for the project.
++# Default: ${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER}
++#
++#
++
++IF(NOT DEFINED _MANAGE_VERSION_CMAKE_)
++ SET(_MANAGE_VERSION_CMAKE_ "DEFINED")
++ INCLUDE(ManageMessage)
++ INCLUDE(ManageVariable)
++
++ SET(CHANGELOG_FILE "${CMAKE_BINARY_DIR}/ChangeLog" CACHE FILEPATH
++ "ChangeLog")
++ SET(CHANGELOG_PREV_FILE "${CMAKE_SOURCE_DIR}/ChangeLog.prev" CACHE FILEPATH
++ "ChangeLog.prev")
++
++ ADD_CUSTOM_TARGET(changelog_prev_update
++ COMMAND ${CMAKE_COMMAND} -E copy ${CHANGELOG_FILE} ${CHANGELOG_PREV_FILE}
++ DEPENDS ${CHANGELOG_FILE}
++ COMMENT "${CHANGELOG_FILE} are saving as ${CHANGELOG_PREV_FILE}"
++ )
++
++ FUNCTION(RELEASE_NOTES_READ_FILE)
++ FOREACH(_arg ${ARGN})
++ IF(EXISTS ${_arg})
++ SET(RELEASE_NOTES_FILE ${_arg} CACHE FILEPATH "Release File")
++ ENDIF(EXISTS ${_arg})
++ ENDFOREACH(_arg ${ARGN})
++
++ IF(NOT RELEASE_NOTES_FILE)
++ SET(RELEASE_NOTES_FILE "RELEASE-NOTES.txt" CACHE FILEPATH "Release Notes")
++ ENDIF(NOT RELEASE_NOTES_FILE)
++
++ FILE(STRINGS "${RELEASE_NOTES_FILE}" _release_lines)
++
++ SET(_changeItemSection 0)
++ SET(_changeItems "")
++ ## Parse release file
++ FOREACH(_line ${_release_lines})
++ IF(_changeItemSection)
++ ### Append lines in change section
++ IF(_changeItems)
++ SET(_changeItems "${_changeItems}\n${_line}")
++ ELSE(_changeItems)
++ SET(_changeItems "${_line}")
++ ENDIF(_changeItems)
++ ELSEIF("${_line}" MATCHES "^[[]Changes[]]")
++ ### Start the change section
++ SET(_changeItemSection 1)
++ ELSE(_changeItemSection)
++ ### Variable Setting section
++ SETTING_STRING_GET_VARIABLE(var value "${_line}")
++ #MESSAGE("var=${var} value=${value}")
++ IF(NOT var MATCHES "#")
++ IF(var STREQUAL "PRJ_VER")
++ SET_COMPILE_ENV(${var} "${value}" CACHE STRING "Project Version" FORCE)
++ ELSEIF(var STREQUAL "SUMMARY")
++ SET(CHANGE_SUMMARY "${value}" CACHE STRING "Change Summary" FORCE)
++ ELSE(var STREQUAL "PRJ_VER")
++ SET(${var} "${value}" CACHE STRING "${var}" FORCE)
++ ENDIF(var STREQUAL "PRJ_VER")
++ ENDIF(NOT var MATCHES "#")
++ ENDIF(_changeItemSection)
++ ENDFOREACH(_line ${_release_line})
++
++ IF(_changeSection EQUAL 0)
++ MESSAGE(FATAL_ERROR "${RELEASE_NOTES_FILE} does not have a [Changes] tag!")
++ ELSEIF("${_changeItems}" STREQUAL "")
++ MESSAGE(FATAL_ERROR "${RELEASE_NOTES_FILE} does not have ChangeLog items!")
++ ENDIF(_changeSection EQUAL 0)
++
++ FILE(WRITE "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" "${_changeItems}")
++
++ SET_COMPILE_ENV(PRJ_DOC_DIR "${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER}"
++ CACHE PATH "Project docdir prefix" FORCE)
++
++ CHANGELOG_WRITE_FILE()
++ ENDFUNCTION(RELEASE_NOTES_READ_FILE)
++
++ FUNCTION(CHANGELOG_WRITE_FILE)
++ INCLUDE(DateTimeFormat)
++
++ FILE(WRITE ${CHANGELOG_FILE} "* ${TODAY_CHANGELOG} ${MAINTAINER} - ${PRJ_VER}\n")
++ FILE(READ "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" _changeLog_items)
++
++ FILE(APPEND ${CHANGELOG_FILE} "${_changeLog_items}\n\n")
++ FILE(READ ${CHANGELOG_PREV_FILE} CHANGELOG_PREV)
++ FILE(APPEND ${CHANGELOG_FILE} "${CHANGELOG_PREV}")
++ SET(CMAKE_CACHE_TXT "${CMAKE_BINARY_DIR}/CMakeCache.txt")
++
++ ADD_CUSTOM_COMMAND(OUTPUT ${CHANGELOG_FILE}
++ COMMAND ${CMAKE_COMMAND} ${CMAKE_SOURCE_DIR}
++ DEPENDS ${RELEASE_NOTES_FILE} ${CHANGELOG_PREV_FILE}
++ COMMENT "Building ${CHANGELOG_FILE}"
++ VERBATIM
++ )
++
++ ADD_CUSTOM_TARGET(changelog ALL
++ DEPENDS ${CHANGELOG_FILE}
++ VERBATIM
++ )
++
++ ENDFUNCTION(CHANGELOG_WRITE_FILE)
++
++
++
++ENDIF(NOT DEFINED _MANAGE_VERSION_CMAKE_)
++
+--- /dev/null
++++ b/Modules/cmake_uninstall.cmake.in
+@@ -0,0 +1,21 @@
++IF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt")
++ MESSAGE(FATAL_ERROR "Cannot find install manifest: \"@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt\"")
++ENDIF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt")
++
++FILE(READ "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt" files)
++STRING(REGEX REPLACE "\n" ";" files "${files}")
++FOREACH(file ${files})
++ MESSAGE(STATUS "Uninstalling \"$ENV{DESTDIR}${file}\"")
++ IF(EXISTS "$ENV{DESTDIR}${file}")
++ EXEC_PROGRAM(
++ "@CMAKE_COMMAND@" ARGS "-E remove \"$ENV{DESTDIR}${file}\""
++ OUTPUT_VARIABLE rm_out
++ RETURN_VALUE rm_retval
++ )
++ IF(NOT "${rm_retval}" STREQUAL 0)
++ MESSAGE(FATAL_ERROR "Problem when removing \"$ENV{DESTDIR}${file}\"")
++ ENDIF(NOT "${rm_retval}" STREQUAL 0)
++ ELSE(EXISTS "$ENV{DESTDIR}${file}")
++ MESSAGE(STATUS "File \"$ENV{DESTDIR}${file}\" does not exist.")
++ ENDIF(EXISTS "$ENV{DESTDIR}${file}")
++ENDFOREACH(file)
diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch
new file mode 100644
index 000000000..27c585847
--- /dev/null
+++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch
@@ -0,0 +1,58 @@
+--- /dev/null
++++ b/ChangeLog.prev
+@@ -0,0 +1,55 @@
++* Mon Nov 26 2012 Ding-Yi Chen <dchen@redhat.com> - 1.4.5
++- Table build scripts has been refactored.
++- cmake-fedora is added as submodule.
++- Fixed Bug 855250 - Change the default filtering for Quick and Cangjie by
++ merging maxiaojun's repository
++- Fixed Google Issue 1405: failed to build ibus-table-chinese due to missing db files
++- Fixed Google issue 1507: Add CJKV Extension C/D support for Array30
++- Merge GitHub Pull request 3: Added the inter punct
++- Merge GitHub Pull request 4: Give Cangjie and Quick users 9 candidates per page
++
++* Fri Sep 07 2012 Ding-Yi Chen <dchen@redhat.com> - 1.4.0
++- Table build scripts has been refactored.
++- cmake-fedora is added as submodule.
++- Fixed Bug 855250 - Change the default filtering for Quick and Cangjie by
++ merging maxiaojun's repository
++- Fixed Google Issue 1405: failed to build ibus-table-chinese due to missing db files
++
++* Fri Oct 28 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.5
++- Merge Caius Chance's branch for DYNAMIC_ADJUST
++- Dependency update to cmake-0.8.1
++
++* Wed Aug 31 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.4
++- Fixed Bug 715707 - FTBFS ibus-table-chinese-1.3.0.20110114-2.fc15
++- Fixed Bug 629212 - bad candidate orders in ibus-table-quick
++- Merged patch from sagara @ github, which address IBus issue 787
++- Make it compatible with cmake-fedora-0.7.994
++- Move the cmake policies to the front
++- Suppress the misleading warning from rpm -V
++
++* Fri Jan 14 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20110114
++- Fix Bug 667877: ibus-table-yinma and ibus-table-xingma have been obsoleted.
++- Now depends on cmake-fedora
++
++* Mon Dec 06 2010 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101206
++- New tables which was not include in original:
++ + array30, array30-big, wubi-haifeng
++- Table removed from original version because of license issues:
++ + zhengma, ziranma
++- Add package review ID
++- Add build tag for el6
++
++* Fri Dec 03 2010 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101201
++- Support out-of-source build
++- Remove ibus-table-chinese-all
++
++* Wed Jan 06 2010 Caius 'kaio' Chance <k at kaio.me> - 1.3.0.20100527
++- Added Quick 3, 5, Classic tables and icons.
++- Added Easy (big) table and icon.
++- Updated AUTHORS, COPYING, license and its declarations.
++- Added CangJie (big) table.
++
++* Wed Aug 19 2008 Yu Yuwei <acevery@gmail.com> - 1.3.0.20100527
++- The first version.
++
++
diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch
new file mode 100644
index 000000000..0f814b765
--- /dev/null
+++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch
@@ -0,0 +1,130 @@
+diff -u -r ibus-table-chinese-1.8.2/tables/array/CMakeLists.txt new/tables/array/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/array/CMakeLists.txt 2018-10-30 01:56:21.474548447 +0100
++++ new/tables/array/CMakeLists.txt 2018-10-29 23:39:57.770116668 +0100
+@@ -16,7 +16,7 @@
+
+ CONFIGURE_FILE(${ARRAY30_HEAD_IN} ${ARRAY30_BASE_HEAD} @ONLY)
+
+-CONVERT_ENCODING(${ARRAY30_BASE_UTF8} UTF16 array30_27489.txt)
++CONVERT_ENCODING(${ARRAY30_BASE_UTF8} UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_27489.txt)
+ GENERATE_FREQ(${ARRAY30_BASE_FREQ}
+ ${ARRAY30_BASE_UTF8}
+ )
+@@ -41,10 +41,10 @@
+ CONFIGURE_FILE(${ARRAY30_HEAD_IN} ${ARRAY30_BIG_HEAD} @ONLY)
+
+ SET(ARRAY30_EXT_B_UTF8 ${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8)
+-CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8 UTF16 array30_ExtB.txt)
++CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8 UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_ExtB.txt)
+
+ SET(ARRAY30_EXT_CD_UTF8 ${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8)
+-CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8 UTF16 array30_ExtCD_V2012A.txt)
++CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8 UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_ExtCD_V2012A.txt)
+
+ ADD_CUSTOM_COMMAND(OUTPUT ${ARRAY30_BIG_UTF8}
+ COMMAND cat ${ARRAY30_BASE_UTF8}
+Only in new/tables/array: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/cangjie/CMakeLists.txt new/tables/cangjie/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/cangjie/CMakeLists.txt 2018-10-30 01:56:50.506773198 +0100
++++ new/tables/cangjie/CMakeLists.txt 2018-10-30 00:15:41.319903050 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(cangjie "cangjie3.txt" "cangjie5.txt" "cangjie-big.txt")
++CONVERT_DB(cangjie "${CMAKE_CURRENT_SOURCE_DIR}/cangjie3.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cangjie5.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cangjie-big.txt")
+
+Only in new/tables/cangjie: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/cantonese/CMakeLists.txt new/tables/cantonese/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/cantonese/CMakeLists.txt 2018-10-30 01:56:29.464408649 +0100
++++ new/tables/cantonese/CMakeLists.txt 2018-10-30 00:05:51.026038238 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(cantonese "cantonese.txt" "cantonhk.txt" "jyutping.txt")
++CONVERT_DB(cantonese "${CMAKE_CURRENT_SOURCE_DIR}/cantonese.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cantonhk.txt" "${CMAKE_CURRENT_SOURCE_DIR}/jyutping.txt")
+
+Only in new/tables/cantonese: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/CMakeLists.txt new/tables/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/CMakeLists.txt 2018-10-30 01:56:08.781947707 +0100
++++ new/tables/CMakeLists.txt 2018-10-30 01:53:51.086824367 +0100
+@@ -87,7 +87,7 @@
+ DEPENDS ${_tabFile}
+ COMMENT "Building ${_tabName} table"
+ )
+- LIST(APPEND _dependDb "${_dbF}")
++ LIST(APPEND _dependDb "${CMAKE_CURRENT_BINARY_DIR}/${_dbF}")
+ IF(EXISTS "${CMAKE_SOURCE_DIR}/icons/${_tabName}.png")
+ LIST(APPEND _dependIcon "${CMAKE_SOURCE_DIR}/icons/${_tabName}.png")
+ ELSEIF(EXISTS "${CMAKE_SOURCE_DIR}/icons/${_tabName}.svg")
+Only in new/tables: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/easy/CMakeLists.txt new/tables/easy/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/easy/CMakeLists.txt 2018-10-30 01:56:35.966667250 +0100
++++ new/tables/easy/CMakeLists.txt 2018-10-30 00:07:49.806217968 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(easy "easy-big.txt")
++CONVERT_DB(easy "${CMAKE_CURRENT_SOURCE_DIR}/easy-big.txt")
+
+Only in new/tables/easy: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/erbi/CMakeLists.txt new/tables/erbi/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/erbi/CMakeLists.txt 2018-10-30 01:56:39.921608060 +0100
++++ new/tables/erbi/CMakeLists.txt 2018-10-30 00:08:14.355641341 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(erbi "erbi.txt" "erbi-qs.txt")
++CONVERT_DB(erbi "${CMAKE_CURRENT_SOURCE_DIR}/erbi.txt" "${CMAKE_CURRENT_SOURCE_DIR}/erbi-qs.txt")
+
+Only in new/tables/erbi: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/quick/CMakeLists.txt new/tables/quick/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/quick/CMakeLists.txt 2018-10-30 01:56:43.592624907 +0100
++++ new/tables/quick/CMakeLists.txt 2018-10-30 00:14:13.643389364 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(quick "quick3.txt" "quick5.txt" "quick-classic.txt")
++CONVERT_DB(quick "${CMAKE_CURRENT_SOURCE_DIR}/quick3.txt" "${CMAKE_CURRENT_SOURCE_DIR}/quick5.txt" "${CMAKE_CURRENT_SOURCE_DIR}/quick-classic.txt")
+
+Only in new/tables/quick: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/scj/CMakeLists.txt new/tables/scj/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/scj/CMakeLists.txt 2018-10-30 01:56:47.079691021 +0100
++++ new/tables/scj/CMakeLists.txt 2018-10-30 00:00:14.404215150 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(scj "scj6.txt")
++CONVERT_DB(scj "${CMAKE_CURRENT_SOURCE_DIR}/scj6.txt")
+
+Only in new/tables/scj: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/stroke5/CMakeLists.txt new/tables/stroke5/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/stroke5/CMakeLists.txt 2018-10-30 01:56:32.727534736 +0100
++++ new/tables/stroke5/CMakeLists.txt 2018-10-30 00:07:28.132024331 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(stroke5 "stroke5.txt")
++CONVERT_DB(stroke5 "${CMAKE_CURRENT_SOURCE_DIR}/stroke5.txt")
+
+Only in new/tables/stroke5: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/wu/CMakeLists.txt new/tables/wu/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/wu/CMakeLists.txt 2018-10-30 01:56:53.921858589 +0100
++++ new/tables/wu/CMakeLists.txt 2018-10-30 00:16:38.080698934 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(wu "wu.txt")
++CONVERT_DB(wu "${CMAKE_CURRENT_SOURCE_DIR}/wu.txt")
+
+Only in new/tables/wu: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/wubi-haifeng/CMakeLists.txt new/tables/wubi-haifeng/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/wubi-haifeng/CMakeLists.txt 2018-10-30 01:56:15.560132413 +0100
++++ new/tables/wubi-haifeng/CMakeLists.txt 2018-10-29 23:30:12.746818405 +0100
+@@ -5,6 +5,6 @@
+ # COMMENT "Building wubi-haifeng86.UTF-8"
+ # )
+
+-MAKE_TABLE_SOURCE_TXT(wubi-haifeng86.txt wubi-haifeng86.head wubi-haifeng86.UTF-8 wubi-haifeng86.tail)
++MAKE_TABLE_SOURCE_TXT(wubi-haifeng86.txt ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.head ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.UTF-8 ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.tail)
+ CONVERT_DB(wubi-haifeng "wubi-haifeng86.txt")
+
+Only in new/tables/wubi-haifeng: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/wubi-jidian/CMakeLists.txt new/tables/wubi-jidian/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/wubi-jidian/CMakeLists.txt 2018-10-30 01:56:25.921357528 +0100
++++ new/tables/wubi-jidian/CMakeLists.txt 2018-10-30 00:01:13.876283460 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(wubi-jidian "wubi-jidian86.txt")
++CONVERT_DB(wubi-jidian "${CMAKE_CURRENT_SOURCE_DIR}/wubi-jidian86.txt")
+
+Only in new/tables/wubi-jidian: .CMakeLists.txt.swp
+diff -u -r ibus-table-chinese-1.8.2/tables/yong/CMakeLists.txt new/tables/yong/CMakeLists.txt
+--- ibus-table-chinese-1.8.2/tables/yong/CMakeLists.txt 2018-10-30 01:56:57.568881862 +0100
++++ new/tables/yong/CMakeLists.txt 2018-10-30 00:17:30.326704114 +0100
+@@ -1,2 +1,2 @@
+-CONVERT_DB(yong "yong.txt")
++CONVERT_DB(yong "${CMAKE_CURRENT_SOURCE_DIR}/yong.txt")
+
diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb b/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb
new file mode 100644
index 000000000..0c33e4f44
--- /dev/null
+++ b/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb
@@ -0,0 +1,82 @@
+DESCRIPTION = "It is a Japanese input engine for IBus."
+LICENSE = "GPLv3"
+LIC_FILES_CHKSUM = "file://COPYING;md5=86bfc594f9971fb2797f5aea1a49d316"
+SECTION = "inputmethods"
+
+SRC_URI = "https://github.com/definite/${PN}/archive/${PV}.tar.gz \
+ file://0001-revert-CMakeLists.txt.patch \
+ file://0002-add-Modules.patch \
+ file://0003-add-ChangeLog.prev.patch \
+ file://0005-fix-cmake-cross-compile.patch \
+"
+
+SRC_URI[md5sum] = "6360649580363bb3627a11e32057f6b1"
+SRC_URI[sha256sum] = "ef62c22ef4e8f9085fc40fcbc14c30f6dac458817df98e9f90f883a3e2080089"
+
+inherit cmake
+
+DEPENDS = " ibus-table "
+
+BBCLASSEXTEND = "native"
+
+# The supported options are "Unix Makefiles" or "Ninja".
+OECMAKE_GENERATOR = "Unix Makefiles"
+
+cmake_do_generate_toolchain_file() {
+ if [ "${BUILD_SYS}" = "${HOST_SYS}" ]; then
+ cmake_crosscompiling="set( CMAKE_CROSSCOMPILING FALSE )"
+ fi
+ cat > ${WORKDIR}/toolchain.cmake <<EOF
+# CMake system name must be something like "Linux".
+# This is important for cross-compiling.
+$cmake_crosscompiling
+set( CMAKE_SYSTEM_NAME `echo ${TARGET_OS} | sed -e 's/^./\u&/' -e
+'s/^\(Linux\).*/\1/'` )
+set( CMAKE_SYSTEM_PROCESSOR
+${@map_target_arch_to_uname_arch(d.getVar('TARGET_ARCH'))} )
+set( CMAKE_C_COMPILER ${OECMAKE_C_COMPILER} )
+set( CMAKE_CXX_COMPILER ${OECMAKE_CXX_COMPILER} )
+set( CMAKE_ASM_COMPILER ${OECMAKE_C_COMPILER} )
+set( CMAKE_AR ${OECMAKE_AR} CACHE FILEPATH "Archiver" )
+set( CMAKE_C_FLAGS "${OECMAKE_C_FLAGS}" CACHE STRING "CFLAGS" )
+set( CMAKE_CXX_FLAGS "${OECMAKE_CXX_FLAGS}" CACHE STRING "CXXFLAGS" )
+set( CMAKE_ASM_FLAGS "${OECMAKE_C_FLAGS}" CACHE STRING "ASM FLAGS" )
+set( CMAKE_C_FLAGS_RELEASE "${OECMAKE_C_FLAGS_RELEASE}" CACHE STRING
+"Additional CFLAGS for release" )
+set( CMAKE_CXX_FLAGS_RELEASE "${OECMAKE_CXX_FLAGS_RELEASE}" CACHE STRING
+"Additional CXXFLAGS for release" )
+set( CMAKE_ASM_FLAGS_RELEASE "${OECMAKE_C_FLAGS_RELEASE}" CACHE STRING
+"Additional ASM FLAGS for release" )
+set( CMAKE_C_LINK_FLAGS "${OECMAKE_C_LINK_FLAGS}" CACHE STRING "LDFLAGS" )
+set( CMAKE_CXX_LINK_FLAGS "${OECMAKE_CXX_LINK_FLAGS}" CACHE STRING "LDFLAGS" )
+
+# only search in the paths provided so cmake doesnt pick
+# up libraries and tools from the native build machine
+set( CMAKE_FIND_ROOT_PATH ${STAGING_DIR_HOST} ${STAGING_DIR_NATIVE}
+${CROSS_DIR} ${OECMAKE_PERLNATIVE_DIR} ${OECMAKE_EXTRA_ROOT_PATH}
+${EXTERNAL_TOOLCHAIN})
+set( CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY )
+# set( CMAKE_FIND_ROOT_PATH_MODE_PROGRAM ${OECMAKE_FIND_ROOT_PATH_MODE_PROGRAM} )
+set( CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY )
+# set( CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY )
+
+# Use qt.conf settings
+set( ENV{QT_CONF_PATH} ${WORKDIR}/qt.conf )
+
+# We need to set the rpath to the correct directory as cmake does not provide
+# any
+# directory as rpath by default
+set( CMAKE_INSTALL_RPATH ${OECMAKE_RPATH} )
+
+# Use native cmake modules
+list(APPEND CMAKE_MODULE_PATH "${STAGING_DATADIR}/cmake/Modules/")
+
+# add for non /usr/lib libdir, e.g. /usr/lib64
+set( CMAKE_LIBRARY_PATH ${libdir} ${base_libdir})
+
+EOF
+}
+
+FILES_${PN} += "${datadir}/ibus-table/icons/* \
+ ${datadir}/ibus-table/tables/* \
+"
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread