* [PATCH 1/4] ARM: dts: hummingboard2: fix uart3 Rx pin conf
2019-01-30 16:18 [PATCH 0/4] ARM: dts: hummingboard2: fixes and improvements Baruch Siach
@ 2019-01-30 16:18 ` Baruch Siach
2019-01-30 16:18 ` [PATCH 2/4] ARM: dts: hummingboard2: add uart3 pinmux for board rev 1.4 Baruch Siach
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Baruch Siach @ 2019-01-30 16:18 UTC (permalink / raw)
To: Russell King, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team
Cc: Baruch Siach, Jon Nettleton, linux-arm-kernel
SION is not needed for that pin. Set regular configuration.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index c413f9c3540f..913f34ac00dc 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -504,7 +504,7 @@
pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
fsl,pins = <
MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000
+ MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x1b0b1
>;
};
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/4] ARM: dts: hummingboard2: add uart3 pinmux for board rev 1.4
2019-01-30 16:18 [PATCH 0/4] ARM: dts: hummingboard2: fixes and improvements Baruch Siach
2019-01-30 16:18 ` [PATCH 1/4] ARM: dts: hummingboard2: fix uart3 Rx pin conf Baruch Siach
@ 2019-01-30 16:18 ` Baruch Siach
2019-01-30 16:18 ` [PATCH 3/4] ARM: dts: hummingboard2: describe optional rs485 Baruch Siach
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Baruch Siach @ 2019-01-30 16:18 UTC (permalink / raw)
To: Russell King, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team
Cc: Baruch Siach, Jon Nettleton, linux-arm-kernel
Hummingboard2 rev 1.4 fixed Rx/Tx swap in the mikroBUS header. Add the
correct pinmux configuration DT node for that board. Leave the current
configuration unchanged.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index 913f34ac00dc..fe95fe27e6ef 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -507,6 +507,14 @@
MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x1b0b1
>;
};
+
+ /* In Hummingboard2 rev 1.4 Rx/Tx are not swapped */
+ pinctrl_hummingboard2_rev14_uart3: hummingboard2-rev14-uart3 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
};
};
@@ -567,6 +575,7 @@
&uart3 {
pinctrl-names = "default";
+ /* Use &pinctrl_hummingboard2_rev14_uart3 for HB2 rev 1.4 */
pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
status = "okay";
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 3/4] ARM: dts: hummingboard2: describe optional rs485
2019-01-30 16:18 [PATCH 0/4] ARM: dts: hummingboard2: fixes and improvements Baruch Siach
2019-01-30 16:18 ` [PATCH 1/4] ARM: dts: hummingboard2: fix uart3 Rx pin conf Baruch Siach
2019-01-30 16:18 ` [PATCH 2/4] ARM: dts: hummingboard2: add uart3 pinmux for board rev 1.4 Baruch Siach
@ 2019-01-30 16:18 ` Baruch Siach
2019-01-30 16:18 ` [PATCH 4/4] ARM: dts: hummingboard2: describe optional can bus Baruch Siach
2019-01-31 6:42 ` [PATCH 0/4] ARM: dts: hummingboard2: fixes and improvements Jon Nettleton
4 siblings, 0 replies; 6+ messages in thread
From: Baruch Siach @ 2019-01-30 16:18 UTC (permalink / raw)
To: Russell King, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team
Cc: Baruch Siach, Jon Nettleton, linux-arm-kernel
A Hummingboard assembly option provides RS-485 transceiver on UART2
(/dev/ttymxc1). Add DT node for that. Keep it disabled, since RS-485 is
not assembled by default.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index fe95fe27e6ef..c5b5c6d3306f 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -501,6 +501,14 @@
>;
};
+ pinctrl_hummingboard2_uart2: hummingboard2-uart2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+ >;
+ };
+
pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
fsl,pins = <
MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1
@@ -573,6 +581,14 @@
status = "okay";
};
+/* Optional RS-485 transceiver */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_uart2>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
&uart3 {
pinctrl-names = "default";
/* Use &pinctrl_hummingboard2_rev14_uart3 for HB2 rev 1.4 */
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 4/4] ARM: dts: hummingboard2: describe optional can bus
2019-01-30 16:18 [PATCH 0/4] ARM: dts: hummingboard2: fixes and improvements Baruch Siach
` (2 preceding siblings ...)
2019-01-30 16:18 ` [PATCH 3/4] ARM: dts: hummingboard2: describe optional rs485 Baruch Siach
@ 2019-01-30 16:18 ` Baruch Siach
2019-01-31 6:42 ` [PATCH 0/4] ARM: dts: hummingboard2: fixes and improvements Jon Nettleton
4 siblings, 0 replies; 6+ messages in thread
From: Baruch Siach @ 2019-01-30 16:18 UTC (permalink / raw)
To: Russell King, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team
Cc: Baruch Siach, Jon Nettleton, linux-arm-kernel
A Hummingboard assembly option provides CAN bus connector for the i.MX6
provided FlexCAN peripheral. Keep disabled by default.
Note the conflict with HDMI pin mux.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index c5b5c6d3306f..2008be6fbee4 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -206,6 +206,7 @@
status = "okay";
};
+/* Conflicts with the CAN bus option */
&hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
@@ -523,6 +524,13 @@
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
>;
};
+
+ pinctrl_hummingboard2_flexcan1: hummingboard2-flexcan1 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ >;
+ };
};
};
@@ -596,6 +604,13 @@
status = "okay";
};
+/* Optional CAN bus. Conflicts with HDMI CEC. */
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_flexcan1>;
+ status = "disabled";
+};
+
&vcc_3v3 {
vin-supply = <&v_3v2>;
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 0/4] ARM: dts: hummingboard2: fixes and improvements
2019-01-30 16:18 [PATCH 0/4] ARM: dts: hummingboard2: fixes and improvements Baruch Siach
` (3 preceding siblings ...)
2019-01-30 16:18 ` [PATCH 4/4] ARM: dts: hummingboard2: describe optional can bus Baruch Siach
@ 2019-01-31 6:42 ` Jon Nettleton
4 siblings, 0 replies; 6+ messages in thread
From: Jon Nettleton @ 2019-01-31 6:42 UTC (permalink / raw)
To: Baruch Siach
Cc: Sascha Hauer, Russell King, NXP Linux Team,
Pengutronix Kernel Team, Fabio Estevam, Shawn Guo,
linux-arm-kernel
On Wed, Jan 30, 2019 at 5:18 PM Baruch Siach <baruch@tkos.co.il> wrote:
>
> The first two patches fix UART on the optional mikroBUS header.
>
> The last two patches add optional CAN and RS485 peripherals. I sent these
> patches before, but they were not applied at the time:
>
> https://patchwork.kernel.org/patch/10528011/
> https://patchwork.kernel.org/patch/10528013/
>
> Both patches are rebased here on top of the UART fixes.
>
> Baruch Siach (4):
> ARM: dts: hummingboard2: fix uart3 Rx pin conf
> ARM: dts: hummingboard2: add uart3 pinmux for board rev 1.4
> ARM: dts: hummingboard2: describe optional rs485
> ARM: dts: hummingboard2: describe optional can bus
>
> arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 42 +++++++++++++++++++-
> 1 file changed, 41 insertions(+), 1 deletion(-)
>
Thanks Baruch,
I would like to note here that I am unhappy with that the only
solution for configuration options is to add comments mentioning
conflicting device-tree entries. While it does at least provide a
reference for users wanting this functionality it is a terrible
solution. The only way to manage this properly would be to support
device-tree overlay fragments in the kernel-tree. I would much rather
have an overlays subdirectory infrastructure or some other mechanism
where these options could be properly written and applied to a "base"
dtb.
-Jon
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread