* [RESEND PATCH V8 0/3] da7280: haptic driver submission @ 2020-02-11 1:13 Roy Im 2020-02-11 1:13 ` Roy Im 2020-02-11 1:13 ` [RESEND PATCH V8 2/3] dt-bindings: input: Add document bindings for DA7280 Roy Im 0 siblings, 2 replies; 7+ messages in thread From: Roy Im @ 2020-02-11 1:13 UTC (permalink / raw) To: David S. Miller, Uwe Kleine-Koenig, Dmitry Torokhov, Greg KH, Lee Jones, Mark Rutland, Mauro Carvalho Chehab, Maximilian Luz, Rob Herring, Rob Herring, Thierry Reding Cc: Support Opensource, devicetree, linux-input, linux-kernel This patch adds support for the Dialog DA7280 Haptic driver IC. In this patch set the following is provided: [PATCH V8 1/3] MAINTAINERS file update for DA7280 [PATCH V8 2/3] DA7280 DT Binding [PATCH V8 3/3] DA7280 Driver This patch applies against linux-next and v5.5 Thank you, Roy Im, Dialog Semiconductor Ltd. Roy Im (3): MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms dt-bindings: input: Add document bindings for DA7280 Input: new da7280 haptic driver .../devicetree/bindings/input/dlg,da7280.txt | 109 ++ MAINTAINERS | 2 + drivers/input/misc/Kconfig | 13 + drivers/input/misc/Makefile | 1 + drivers/input/misc/da7280.c | 1688 ++++++++++++++++++++ drivers/input/misc/da7280.h | 412 +++++ 6 files changed, 2225 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/dlg,da7280.txt create mode 100644 drivers/input/misc/da7280.c create mode 100644 drivers/input/misc/da7280.h -- end-of-patch for RESEND PATCH V8 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RESEND PATCH V8 3/3] Input: new da7280 haptic driver 2020-02-11 1:13 [RESEND PATCH V8 0/3] da7280: haptic driver submission Roy Im @ 2020-02-11 1:13 ` Roy Im 2020-02-11 1:13 ` [RESEND PATCH V8 2/3] dt-bindings: input: Add document bindings for DA7280 Roy Im 1 sibling, 0 replies; 7+ messages in thread From: Roy Im @ 2020-02-11 1:13 UTC (permalink / raw) To: Uwe Kleine-Koenig, Bartosz Golaszewski, Brian Masney, Dmitry Torokhov, Greg KH, Lee Jones, Luca Weiss, Maximilian Luz, Pascal PAILLET-LME, Rob Herring, Samuel Ortiz, Thierry Reding, Thomas Gleixner Cc: Support Opensource, linux-input, linux-kernel, linux-pwm Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple mode and integrated waveform memory and wideband support. It communicates via an I2C bus to the device. Signed-off-by: Roy Im <roy.im.opensource@diasemi.com> --- v8: - Added changes to support FF_PERIODIC/FF_CUSTOM and FF_CONSTANT. - Updated the dt-related code. - Removed memless related functions. v7: - Added more attributes to handle one value per file. - Replaced and updated the dt-related code and functions called. - Fixed error/functions. - Rebased to v4.19-rc6. v6: No changes. v5: Fixed errors in Kconfig file. v4: Updated code as dt-bindings are changed. v3: No changes. v2: Fixed kbuild error/warning drivers/input/misc/Kconfig | 13 + drivers/input/misc/Makefile | 1 + drivers/input/misc/da7280.c | 1688 +++++++++++++++++++++++++++++++++++++++++++ drivers/input/misc/da7280.h | 412 +++++++++++ 4 files changed, 2114 insertions(+) create mode 100644 drivers/input/misc/da7280.c create mode 100644 drivers/input/misc/da7280.h diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7e2e658..e2bf442 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -879,4 +879,17 @@ config INPUT_STPMIC1_ONKEY To compile this driver as a module, choose M here: the module will be called stpmic1_onkey. +config INPUT_DA7280_HAPTICS + tristate "Dialog Semiconductor DA7280 haptics support" + depends on INPUT && I2C + select INPUT_FF_MEMLESS + select REGMAP_I2C + help + Say Y to enable support for the Dialog DA7280 haptics driver. + The haptics can be controlled by i2c communication, + or by PWM input, or by GPI. + + To compile this driver as a module, choose M here: the + module will be called da7280. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 8fd187f..71dc381 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_CPCAP_PWRBUTTON) += cpcap-pwrbutton.o +obj-$(CONFIG_INPUT_DA7280_HAPTICS) += da7280.o obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o diff --git a/drivers/input/misc/da7280.c b/drivers/input/misc/da7280.c new file mode 100644 index 0000000..4d1d1fc --- /dev/null +++ b/drivers/input/misc/da7280.c @@ -0,0 +1,1688 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DA7280 Haptic device driver + * + * Copyright (c) 2019 Dialog Semiconductor. + * Author: Roy Im <Roy.Im.Opensource@diasemi.com> + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/workqueue.h> +#include <linux/uaccess.h> +#include "da7280.h" + +/* uV unit for voltage rate */ +#define DA7280_VOLTAGE_RATE_MAX 6000000 +#define DA7280_VOLTAGE_RATE_STEP 23400 +#define DA7280_NOMMAX_DFT 0x6B +#define DA7280_ABSMAX_DFT 0x78 + +#define DA7280_IMPD_MAX 1500000000 +#define DA7280_IMPD_DEFAULT 22000000 + +#define DA7280_IMAX_DEFAULT 0x0E +/* uA unit step and limit for IMAX*/ +#define DA7280_IMAX_STEP 7200 +#define DA7280_IMAX_LIMIT 252000 + +#define DA7280_RESONT_FREQH_DFT 0x39 +#define DA7280_RESONT_FREQL_DFT 0x32 +#define DA7280_MIN_RESONAT_FREQ_HZ 50 +#define DA7280_MAX_RESONAT_FREQ_HZ 300 +#define DA7280_MIN_PWM_FREQ_KHZ 10 +#define DA7280_MAX_PWM_FREQ_KHZ 250 + +#define DA7280_SEQ_ID_MAX 15 +#define DA7280_SEQ_LOOP_MAX 15 +#define DA7280_GPI1_SEQ_ID_DEFT 0x0 + +#define DA7280_SNP_MEM_SIZE 100 +#define DA7280_SNP_MEM_MAX DA7280_SNP_MEM_99 + +#define IRQ_NUM 3 + +#define DA7280_SKIP_INIT 0x100 + +#define DA7280_FF_EFFECT_COUNT_MAX 15 + +enum da7280_haptic_dev_t { + DA7280_LRA = 0, + DA7280_ERM_BAR = 1, + DA7280_ERM_COIN = 2, + DA7280_DEV_MAX, +}; + +enum da7280_op_mode { + DA7280_INACTIVE = 0, + DA7280_DRO_MODE = 1, + DA7280_PWM_MODE = 2, + DA7280_RTWM_MODE = 3, + DA7280_ETWM_MODE = 4, + DA7280_OPMODE_MAX, +}; + +#define DA7280_FF_CONSTANT_DRO 1 +#define DA7280_FF_PERIODIC_PWM 2 +#define DA7280_FF_PERIODIC_RTWM 1 +#define DA7280_FF_PERIODIC_ETWM 2 + +#define DA7280_FF_PERIODIC_MODE DA7280_RTWM_MODE +#define DA7280_FF_CONSTANT_MODE DA7280_DRO_MODE + +enum da7280_custom_effect_param { + DA7280_CUSTOM_DATA_SEQ_ID_IDX = 0, + DA7280_CUSTOM_DATA_SEQ_LOOP_IDX = 1, + DA7280_CUSTOM_DATA_LEN = 2, +}; + +struct da7280_gpi_ctl { + u8 seq_id; + u8 mode; + u8 polarity; +}; + +struct da7280_haptic { + struct regmap *regmap; + struct input_dev *input_dev; + struct device *dev; + struct i2c_client *client; + struct pwm_device *pwm_dev; + + bool legacy; + int pwm_id; + struct delayed_work work_duration; + struct work_struct work_playback; + struct work_struct work_setgain; + int val; + u16 gain; + + s16 level; + + u8 dev_type; + u8 op_mode; + u8 const_op_mode; + u8 periodic_op_mode; + u16 nommax; + u16 absmax; + u32 imax; + u32 impd; + u32 resonant_freq_h; + u32 resonant_freq_l; + bool bemf_sense_en; + bool freq_track_en; + bool acc_en; + bool rapid_stop_en; + bool amp_pid_en; + u8 ps_seq_id; + u8 ps_seq_loop; + struct da7280_gpi_ctl gpi_ctl[3]; + bool mem_update; + u8 snp_mem[DA7280_SNP_MEM_SIZE]; + u8 enabled; + int length_ms; +}; + +static bool da7280_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case DA7280_IRQ_EVENT1: + case DA7280_IRQ_EVENT_WARNING_DIAG: + case DA7280_IRQ_EVENT_SEQ_DIAG: + case DA7280_IRQ_STATUS1: + case DA7280_TOP_CTL1: + return true; + default: + return false; + } +} + +static const struct regmap_config da7280_haptic_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = DA7280_SNP_MEM_MAX, + .volatile_reg = da7280_volatile_register, +}; + +static int da7280_haptic_mem_update(struct da7280_haptic *haptics) +{ + int error; + unsigned int val; + + /* It is recommended to update the patterns + * during haptic is not working in order to avoid conflict + */ + error = regmap_read(haptics->regmap, DA7280_IRQ_STATUS1, &val); + if (error) + return error; + if (val & DA7280_STA_WARNING_MASK) { + dev_warn(haptics->dev, + "Warning! Please check HAPTIC status.\n"); + return -EBUSY; + } + + /* Patterns are not updated if the lock bit is enabled */ + val = 0; + error = regmap_read(haptics->regmap, DA7280_MEM_CTL2, &val); + if (error) + return error; + if (~val & DA7280_WAV_MEM_LOCK_MASK) { + dev_warn(haptics->dev, + "Please unlock the bit first\n"); + return -EACCES; + } + + /* Set to Inactive mode to make sure safety */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, + 0); + if (error) + return error; + + error = regmap_read(haptics->regmap, DA7280_MEM_CTL1, &val); + if (error) + return error; + + return regmap_bulk_write(haptics->regmap, val, + haptics->snp_mem, DA7280_SNP_MEM_MAX - val + 1); +} + +static int da7280_haptic_set_pwm(struct da7280_haptic *haptics) +{ + struct pwm_args pargs; + u64 period_mag_multi; + unsigned int pwm_duty; + int error; + + pwm_get_args(haptics->pwm_dev, &pargs); + period_mag_multi = + (u64)(pargs.period * haptics->gain); + if (haptics->acc_en) + pwm_duty = + (unsigned int)(period_mag_multi >> 16); + else + pwm_duty = + (unsigned int)((period_mag_multi >> 16) + + pargs.period) / 2; + + error = pwm_config(haptics->pwm_dev, + pwm_duty, pargs.period); + if (error) { + dev_err(haptics->dev, + "failed to configure pwm : %d\n", error); + return error; + } + + error = pwm_enable(haptics->pwm_dev); + if (error) { + pwm_disable(haptics->pwm_dev); + dev_err(haptics->dev, + "failed to enable haptics pwm device : %d\n", error); + } + + return error; +} + +static void da7280_haptic_enable(struct da7280_haptic *haptics) +{ + int error = 0; + + if (haptics->enabled) + return; + + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + /* the valid range check when acc_en is enabled */ + if (haptics->acc_en && haptics->level > 0x7F) + haptics->level = 0x7F; + else if (haptics->level > 0xFF) + haptics->level = 0xFF; + + /* Set driver level + * as a % of ACTUATOR_NOMMAX(nommax) + */ + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, + haptics->level); + if (error) { + dev_err(haptics->dev, + "i2c err (%d) for driving level (%d)\n", + error, haptics->level); + return; + } + break; + case DA7280_PWM_MODE: + if (da7280_haptic_set_pwm(haptics)) + return; + break; + case DA7280_RTWM_MODE: + /* The pattern will be played by + * the PS_SEQ_ID and the PS_SEQ_LOOP + */ + case DA7280_ETWM_MODE: + /* The pattern will be played by + * the GPI[N] state, GPI(N)_SEQUENCE_ID + * and the PS_SEQ_LOOP. + * please see the datasheet for the details. + */ + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d)\n", haptics->op_mode); + return; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, + haptics->op_mode); + if (error) { + dev_err(haptics->dev, + "i2c err for op_mode setting : %d\n", error); + return; + } + + if (haptics->op_mode == DA7280_PWM_MODE || + haptics->op_mode == DA7280_RTWM_MODE) { + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_SEQ_START_MASK, + DA7280_SEQ_START_MASK); + if (error) { + dev_err(haptics->dev, + "i2c err for sequence triggering : %d\n", + error); + return; + } + } + + haptics->enabled = true; + if (haptics->length_ms && haptics->op_mode == DA7280_DRO_MODE) + schedule_delayed_work(&haptics->work_duration, + msecs_to_jiffies(haptics->length_ms)); +} + +static void da7280_haptic_disable(struct da7280_haptic *haptics) +{ + int error; + + if (!haptics->enabled) + return; + + /* Set to Inactive mode */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for op_mode off : %d\n", error); + return; + } + + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for DRO mode off : %d\n", + error); + return; + } + break; + case DA7280_PWM_MODE: + pwm_disable(haptics->pwm_dev); + break; + case DA7280_RTWM_MODE: + case DA7280_ETWM_MODE: + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_SEQ_START_MASK, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for RTWM or ETWM mode off : %d\n", + error); + return; + } + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d)\n", haptics->op_mode); + return; + } + + haptics->enabled = false; +} + +static void da7280_haptic_work_duration(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_duration.work); + + da7280_haptic_disable(haptics); +} + +static void da7280_haptic_work_playback(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_playback); + int val = haptics->val; + + if (!!val) + da7280_haptic_enable(haptics); + else + da7280_haptic_disable(haptics); +} + +static void da7280_haptic_work_setgain(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_setgain); + u16 gain = haptics->gain; + int error = 0; + + if (gain == 0) + return; + + if (gain > 0x7fff) + gain = 0x7fff; + + /* DRO and PWM modes support set_gain feature + */ + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + if (haptics->acc_en == 1) { + haptics->level = (u8)(gain * 0x7F / 0x7fff); + } else if (haptics->acc_en == 0) { + haptics->level = (u8)(gain * 0xFF / 0x7fff); + + if (gain <= 0x3FFF) + haptics->level = haptics->level + 0x80; + else if (gain > 0x3FFF) + haptics->level = haptics->level - 0x80; + } else { + dev_err(haptics->dev, "Invalid acc_en %d.\n", + haptics->acc_en); + } + + /* Set driver level + * as a % of ACTUATOR_NOMMAX(nommax) + */ + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, + haptics->level); + if (error) { + dev_err(haptics->dev, + "i2c err for driving level set : %d\n", + error); + return; + } + break; + case DA7280_PWM_MODE: + haptics->gain = gain; + if (haptics->enabled) { + if (da7280_haptic_set_pwm(haptics)) + return; + } + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d). Change to DRM (Constant) mode.\n", + haptics->op_mode); + break; + } +} + +static int da7280_haptics_upload_effect(struct input_dev *dev, + struct ff_effect *effect, + struct ff_effect *old) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + int error; + s16 level; + int tmp, i; + unsigned int val; + s16 data[DA7280_SNP_MEM_SIZE] = {0,}; + + switch (effect->type) { + /* DRO/PWM modes support this type */ + case FF_CONSTANT: + haptics->op_mode = haptics->const_op_mode; + /* effect->replay.length should be ms base */ + haptics->length_ms = effect->replay.length; + level = effect->u.constant.level; + tmp = level * 254; + haptics->level = tmp / 0x7FFF; + break; + + /* RTWM/ETWM modes support this type */ + case FF_PERIODIC: + if (effect->u.periodic.waveform != FF_CUSTOM) { + dev_err(haptics->dev, "Only accept FF_CUSTOM type\n"); + return -EINVAL; + } + + /* + * Load the data and check the length. + * the data will be patterns in this case: 3 < X <= 100, + * and will be saved into the waveform memory inside DA728x. + * If X = 2, the data will be PS_SEQ_ID and PS_SEQ_LOOP . + */ + if (effect->u.periodic.custom_len == DA7280_CUSTOM_DATA_LEN) + goto set_id_loop; + + if (effect->u.periodic.custom_len < DA7280_CUSTOM_DATA_LEN || + effect->u.periodic.custom_len > DA7280_SNP_MEM_SIZE) { + dev_err(haptics->dev, "Invalid data size\n"); + return -EINVAL; + } + + if (copy_from_user(data, effect->u.periodic.custom_data, + sizeof(s16) * + effect->u.periodic.custom_len)) { + dev_err(haptics->dev, + "custom data load error\n"); + return -EFAULT; + } + + memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE); + + for (i = 0; i < effect->u.periodic.custom_len; i++) { + if (data[i] <= 0xff) { + haptics->snp_mem[i] = (u8)data[i]; + } else { + dev_err(haptics->dev, + "Invalid data in the custom data\n"); + return -EINVAL; + } + } + + error = da7280_haptic_mem_update(haptics); + if (error) { + dev_err(haptics->dev, + "mem update error: %d\n", + error); + return error; + } + break; + +set_id_loop: + if (copy_from_user(data, effect->u.periodic.custom_data, + sizeof(s16) * DA7280_CUSTOM_DATA_LEN)) { + dev_err(haptics->dev, + "custom id/loop load error\n"); + return -EFAULT; + } + + haptics->ps_seq_id = + data[DA7280_CUSTOM_DATA_SEQ_ID_IDX] <= + DA7280_SEQ_ID_MAX ? + data[DA7280_CUSTOM_DATA_SEQ_ID_IDX] : 0; + + haptics->ps_seq_loop = + data[DA7280_CUSTOM_DATA_SEQ_LOOP_IDX] <= + DA7280_SEQ_LOOP_MAX ? + data[DA7280_CUSTOM_DATA_SEQ_LOOP_IDX] : 0; + + haptics->op_mode = haptics->periodic_op_mode; + + val = haptics->ps_seq_id << DA7280_PS_SEQ_ID_SHIFT | + haptics->ps_seq_loop << DA7280_PS_SEQ_LOOP_SHIFT; + error = regmap_write(haptics->regmap, + DA7280_SEQ_CTL2, val); + if (error) { + dev_err(haptics->dev, + "i2c err for driving level set : %d\n", + error); + return error; + } + break; + + default: + dev_err(haptics->dev, "Unsupported effect type: %d\n", + effect->type); + return -EINVAL; + } + + return 0; +} + +static int da7280_haptics_playback(struct input_dev *dev, + int effect_id, int val) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + + if (!haptics->op_mode) { + dev_warn(haptics->dev, + "Any effects are not uploaded yet\n"); + return -EPERM; + } + + haptics->val = val; + schedule_work(&haptics->work_playback); + + return 0; +} + +static void da7280_haptics_set_gain(struct input_dev *dev, u16 gain) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + + haptics->gain = gain; + schedule_work(&haptics->work_setgain); +} + +static int da7280_haptic_open(struct input_dev *dev) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + int error; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + dev_err(haptics->dev, + "Failed to open haptic, i2c error : %d\n", error); + + return error; +} + +static void da7280_haptic_close(struct input_dev *dev) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + int error; + + cancel_delayed_work_sync(&haptics->work_duration); + cancel_work_sync(&haptics->work_playback); + cancel_work_sync(&haptics->work_setgain); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) + goto error_i2c; + + if (haptics->op_mode == DA7280_DRO_MODE) { + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, 0); + + if (error) + goto error_i2c; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, 0); + if (error) + goto error_i2c; + + return; + +error_i2c: + dev_err(haptics->dev, "DA7280-haptic i2c error : %d\n", error); +} + +static u8 da7280_haptic_of_mode_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "LRA")) + return DA7280_LRA; + else if (!strcmp(str, "ERM-bar")) + return DA7280_ERM_BAR; + else if (!strcmp(str, "ERM-coin")) + return DA7280_ERM_COIN; + + dev_warn(dev, "Invalid string - set to default\n"); + return DA7280_LRA; +} + +static u8 da7280_haptic_of_gpi_mode_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "Single-pattern")) + return 0; + else if (!strcmp(str, "Multi-pattern")) + return 1; + + dev_warn(dev, "Invalid string - set to default\n"); + return 0; +} + +static u8 da7280_haptic_of_gpi_pol_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "Rising-edge")) + return 0; + else if (!strcmp(str, "Falling-edge")) + return 1; + else if (!strcmp(str, "Both-edge")) + return 2; + + dev_warn(dev, "Invalid string - set to default\n"); + return 0; +} + +static u8 da7280_haptic_of_volt_rating_set(u32 val) +{ + u32 voltage; + + voltage = val / DA7280_VOLTAGE_RATE_STEP + 1; + + if (voltage > 0xFF) + return 0xFF; + return (u8)voltage; +} + +static void da7280_parse_properties(struct device *dev, + struct da7280_haptic *haptics) +{ + char gpi_str1[] = "dlg,gpi0-seq-id"; + char gpi_str2[] = "dlg,gpi0-mode"; + char gpi_str3[] = "dlg,gpi0-polarity"; + unsigned int i, mem[DA7280_SNP_MEM_SIZE]; + const char *str; + u32 val; + + if (!device_property_read_string(dev, "dlg,actuator-type", &str)) + haptics->dev_type = + da7280_haptic_of_mode_str(dev, str); + else /* if no property, then use the mode inside chip */ + haptics->dev_type = DA7280_DEV_MAX; + + if (device_property_read_u32(dev, "dlg,const-op-mode", &val) >= 0) + if (val == DA7280_FF_PERIODIC_PWM) + haptics->const_op_mode = DA7280_PWM_MODE; + else + haptics->const_op_mode = DA7280_DRO_MODE; + else + haptics->const_op_mode = DA7280_DRO_MODE; + + if (device_property_read_u32(dev, "dlg,periodic-op-mode", &val) >= 0) + if (val == DA7280_FF_PERIODIC_ETWM) + haptics->periodic_op_mode = DA7280_ETWM_MODE; + else + haptics->periodic_op_mode = DA7280_RTWM_MODE; + else + haptics->periodic_op_mode = DA7280_RTWM_MODE; + + if (device_property_read_u32(dev, "dlg,nom-microvolt", &val) >= 0) + if (val < DA7280_VOLTAGE_RATE_MAX) + haptics->nommax = + da7280_haptic_of_volt_rating_set(val); + else + haptics->nommax = DA7280_SKIP_INIT; + else /* if no property, then use the value inside chip */ + haptics->nommax = DA7280_SKIP_INIT; + + if (device_property_read_u32(dev, "dlg,abs-max-microvolt", + &val) >= 0) + if (val < DA7280_VOLTAGE_RATE_MAX) + haptics->absmax = + da7280_haptic_of_volt_rating_set(val); + else + haptics->absmax = DA7280_SKIP_INIT; + else + haptics->absmax = DA7280_SKIP_INIT; + + if (device_property_read_u32(dev, "dlg,imax-microamp", &val) >= 0) + if (val < DA7280_IMAX_LIMIT) + haptics->imax = (val - 28600) + / DA7280_IMAX_STEP + 1; + else + haptics->imax = DA7280_IMAX_DEFAULT; + else + haptics->imax = DA7280_IMAX_DEFAULT; + + if (device_property_read_u32(dev, "dlg,impd-micro-ohms", &val) >= 0) + if (val <= DA7280_IMPD_MAX) + haptics->impd = val; + else + haptics->impd = DA7280_IMPD_DEFAULT; + else + haptics->impd = DA7280_IMPD_DEFAULT; + + if (device_property_read_u32(dev, "dlg,resonant-freq-hz", + &val) >= 0) { + if (val < DA7280_MAX_RESONAT_FREQ_HZ && + val > DA7280_MIN_RESONAT_FREQ_HZ) { + haptics->resonant_freq_h = + ((1000000000 / (val * 1333)) >> 7) & 0xFF; + haptics->resonant_freq_l = + (1000000000 / (val * 1333)) & 0x7F; + } else { + haptics->resonant_freq_h = + DA7280_RESONT_FREQH_DFT; + haptics->resonant_freq_l = + DA7280_RESONT_FREQL_DFT; + } + } else { + haptics->resonant_freq_h = DA7280_SKIP_INIT; + haptics->resonant_freq_l = DA7280_SKIP_INIT; + } + + if (device_property_read_u32(dev, "dlg,ps-seq-id", &val) >= 0) + if (val <= DA7280_SEQ_ID_MAX) + haptics->ps_seq_id = val; + else + haptics->ps_seq_id = 0; + else /* if no property, set to zero as a default do nothing */ + haptics->ps_seq_id = 0; + + if (device_property_read_u32(dev, "dlg,ps-seq-loop", &val) >= 0) + if (val <= DA7280_SEQ_LOOP_MAX) + haptics->ps_seq_loop = val; + else + haptics->ps_seq_loop = 0; + else /* if no property, then do nothing */ + haptics->ps_seq_loop = 0; + + /* GPI0~2 Control */ + for (i = 0; i < 3; i++) { + gpi_str1[7] = '0' + i; + if (device_property_read_u32 (dev, gpi_str1, &val) >= 0) + if (val <= DA7280_SEQ_ID_MAX) + haptics->gpi_ctl[i].seq_id = val; + else + haptics->gpi_ctl[i].seq_id = + DA7280_GPI1_SEQ_ID_DEFT + i; + else /* if no property, then do nothing */ + haptics->gpi_ctl[i].seq_id = + DA7280_GPI1_SEQ_ID_DEFT + i; + + gpi_str2[7] = '0' + i; + if (!device_property_read_string(dev, gpi_str2, &str)) + haptics->gpi_ctl[i].mode = + da7280_haptic_of_gpi_mode_str(dev, str); + else + haptics->gpi_ctl[i].mode = 0; + + gpi_str3[7] = '0' + i; + if (!device_property_read_string(dev, gpi_str3, &str)) + haptics->gpi_ctl[i].polarity = + da7280_haptic_of_gpi_pol_str(dev, str); + else + haptics->gpi_ctl[i].polarity = 0; + } + + haptics->bemf_sense_en = + device_property_read_bool(dev, "dlg,bemf-sens-enable"); + haptics->freq_track_en = + device_property_read_bool(dev, "dlg,freq-track-enable"); + haptics->acc_en = + device_property_read_bool(dev, "dlg,acc-enable"); + haptics->rapid_stop_en = + device_property_read_bool(dev, "dlg,rapid-stop-enable"); + haptics->amp_pid_en = + device_property_read_bool(dev, "dlg,amp-pid-enable"); + + if (device_property_read_u32_array(dev, "dlg,mem-array", + &mem[0], + DA7280_SNP_MEM_SIZE) >= 0) { + haptics->mem_update = true; + memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE); + for (i = 0; i < DA7280_SNP_MEM_SIZE; i++) { + if (mem[i] <= 0xff) { + haptics->snp_mem[i] = (u8)mem[i]; + } else { + dev_err(haptics->dev, + "Invalid data in mem-array\n"); + haptics->mem_update = false; + break; + } + } + } else { + haptics->mem_update = false; + } +} + +static irqreturn_t da7280_irq_handler(int irq, void *data) +{ + struct da7280_haptic *haptics = data; + struct device *dev = haptics->dev; + u8 events[IRQ_NUM]; + int error; + + /* Check what events have happened */ + error = regmap_bulk_read(haptics->regmap, + DA7280_IRQ_EVENT1, + events, IRQ_NUM); + if (error) + goto error_i2c; + + /* Clear events */ + error = regmap_write(haptics->regmap, + DA7280_IRQ_EVENT1, events[0]); + if (error) + goto error_i2c; + + if (events[0] & DA7280_E_SEQ_FAULT_MASK) { + /* Stop first if Haptic is working + * Otherwise, the fault may happen continually + * even though the bit is cleared. + */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) + goto error_i2c; + } + + if (events[0] & DA7280_E_SEQ_DONE_MASK) + haptics->enabled = false; + + if (events[0] & DA7280_E_WARNING_MASK) { + if (events[1] & DA7280_E_LIM_DRIVE_MASK || + events[1] & DA7280_E_LIM_DRIVE_ACC_MASK) + dev_warn(dev, "Please reduce the driver level\n"); + if (events[1] & DA7280_E_LIM_DRIVE_ACC_MASK) + dev_warn(dev, "Please Check the mem data format\n"); + } + + if (events[0] & DA7280_E_SEQ_FAULT_MASK) { + if (events[2] & DA7280_E_SEQ_ID_FAULT_MASK) + dev_info(dev, "Please reload PS_SEQ_ID & mem data\n"); + if (events[2] & DA7280_E_MEM_FAULT_MASK) + dev_info(dev, "Please reload the mem data\n"); + if (events[2] & DA7280_E_PWM_FAULT_MASK) + dev_info(dev, "Please restart PWM interface\n"); + } + + return IRQ_HANDLED; + +error_i2c: + dev_err(dev, "da7280 i2c error : %d\n", error); + return IRQ_NONE; +} + +static int da7280_init(struct da7280_haptic *haptics) +{ + int error, i; + unsigned int val = 0; + u32 v2i_factor; + u8 mask = 0; + + /* If device type is DA7280_DEV_MAX, + * then just use default value inside chip. + */ + if (haptics->dev_type == DA7280_DEV_MAX) { + error = regmap_read(haptics->regmap, DA7280_TOP_CFG1, &val); + if (error) + goto error_i2c; + if (val & DA7280_ACTUATOR_TYPE_MASK) + haptics->dev_type = DA7280_ERM_COIN; + else + haptics->dev_type = DA7280_LRA; + } + + /* Apply user settings */ + if (haptics->dev_type == DA7280_LRA) { + if (haptics->resonant_freq_l != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, + DA7280_FRQ_LRA_PER_H, + haptics->resonant_freq_h); + if (error) + goto error_i2c; + error = regmap_write(haptics->regmap, + DA7280_FRQ_LRA_PER_L, + haptics->resonant_freq_l); + if (error) + goto error_i2c; + } + } else if (haptics->dev_type == DA7280_ERM_COIN) { + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_INT_CFG1, + DA7280_BEMF_FAULT_LIM_MASK, 0); + if (error) + goto error_i2c; + + mask = DA7280_TST_CALIB_IMPEDANCE_DIS_MASK | + DA7280_V2I_FACTOR_FREEZE_MASK; + val = DA7280_TST_CALIB_IMPEDANCE_DIS_MASK | + DA7280_V2I_FACTOR_FREEZE_MASK; + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG4, + mask, val); + if (error) + goto error_i2c; + + haptics->acc_en = false; + haptics->rapid_stop_en = false; + haptics->amp_pid_en = false; + } + + mask = DA7280_ACTUATOR_TYPE_MASK | + DA7280_BEMF_SENSE_EN_MASK | + DA7280_FREQ_TRACK_EN_MASK | + DA7280_ACCELERATION_EN_MASK | + DA7280_RAPID_STOP_EN_MASK | + DA7280_AMP_PID_EN_MASK; + + val = (haptics->dev_type ? 1 : 0) + << DA7280_ACTUATOR_TYPE_SHIFT | + (haptics->bemf_sense_en ? 1 : 0) + << DA7280_BEMF_SENSE_EN_SHIFT | + (haptics->freq_track_en ? 1 : 0) + << DA7280_FREQ_TRACK_EN_SHIFT | + (haptics->acc_en ? 1 : 0) + << DA7280_ACCELERATION_EN_SHIFT | + (haptics->rapid_stop_en ? 1 : 0) + << DA7280_RAPID_STOP_EN_SHIFT | + (haptics->amp_pid_en ? 1 : 0) + << DA7280_AMP_PID_EN_SHIFT; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG1, mask, val); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG5, + DA7280_V2I_FACTOR_OFFSET_EN_MASK, + haptics->acc_en ? + DA7280_V2I_FACTOR_OFFSET_EN_MASK : 0); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG2, + DA7280_MEM_DATA_SIGNED_MASK, + haptics->acc_en ? + 0 : DA7280_MEM_DATA_SIGNED_MASK); + if (error) + goto error_i2c; + + if (haptics->nommax != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, + DA7280_ACTUATOR1, + haptics->nommax); + if (error) + goto error_i2c; + } + + if (haptics->absmax != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, DA7280_ACTUATOR2, + haptics->absmax); + if (error) + goto error_i2c; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_ACTUATOR3, + DA7280_IMAX_MASK, + haptics->imax); + if (error) + goto error_i2c; + + v2i_factor = + haptics->impd * (haptics->imax + 4) / 1610400; + error = regmap_write(haptics->regmap, + DA7280_CALIB_V2I_L, + v2i_factor & 0xff); + if (error) + goto error_i2c; + error = regmap_write(haptics->regmap, + DA7280_CALIB_V2I_H, + v2i_factor >> 8); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + goto error_i2c; + + if (haptics->mem_update) { + error = da7280_haptic_mem_update(haptics); + if (error) + goto error_i2c; + } + + /* Set PS_SEQ_ID and PS_SEQ_LOOP */ + val = haptics->ps_seq_id << DA7280_PS_SEQ_ID_SHIFT | + haptics->ps_seq_loop << DA7280_PS_SEQ_LOOP_SHIFT; + error = regmap_write(haptics->regmap, + DA7280_SEQ_CTL2, val); + if (error) + goto error_i2c; + + /* GPI(N) CTL */ + for (i = 0; i < 3; i++) { + val = haptics->gpi_ctl[i].seq_id + << DA7280_GPI0_SEQUENCE_ID_SHIFT | + haptics->gpi_ctl[i].mode + << DA7280_GPI0_MODE_SHIFT | + haptics->gpi_ctl[i].polarity + << DA7280_GPI0_POLARITY_SHIFT; + error = regmap_write(haptics->regmap, + DA7280_GPI_0_CTL + i, val); + if (error) + goto error_i2c; + } + + /* Mask ADC_SAT_M bit as default */ + error = regmap_update_bits(haptics->regmap, + DA7280_IRQ_MASK2, + DA7280_ADC_SAT_M_MASK, + DA7280_ADC_SAT_M_MASK); + if (error) + goto error_i2c; + + /* Clear Interrupts */ + error = regmap_write(haptics->regmap, DA7280_IRQ_EVENT1, 0xff); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_IRQ_MASK1, + DA7280_SEQ_FAULT_M_MASK + | DA7280_SEQ_DONE_M_MASK, 0); + if (error) + goto error_i2c; + + haptics->enabled = false; + return 0; + +error_i2c: + dev_err(haptics->dev, "haptic init - I2C error : %d\n", error); + return error; +} + +/* Valid format for ps_seq_id + * echo X > ps_seq_id + * ex) echo 2 > /sys/class/..../ps_seq_id + * 0 <= X <= 15. + */ +static ssize_t ps_seq_id_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_SEQ_CTL2, + DA7280_PS_SEQ_ID_MASK, + (val & 0xf) >> DA7280_PS_SEQ_ID_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->ps_seq_id = val & 0xf; + + return count; + +err: + dev_err(dev, "Invalid input\n"); + return count; +} + +static ssize_t ps_seq_id_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_SEQ_CTL2, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_PS_SEQ_ID_MASK) + >> DA7280_PS_SEQ_ID_SHIFT; + + return sprintf(buf, "ps_seq_id is %d\n", val); +} + +/* Valid format for ps_seq_loop + * echo X > ps_seq_loop + * ex) echo 2 > /sys/class/..../ps_seq_loop + * 0 <= X <= 15. + */ +static ssize_t ps_seq_loop_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_SEQ_CTL2, + DA7280_PS_SEQ_LOOP_MASK, + (val & 0xF) << DA7280_PS_SEQ_LOOP_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->ps_seq_loop = (val & 0xF); + + return count; +err: + dev_err(dev, "Invalid input value!\n"); + return count; +} + +static ssize_t ps_seq_loop_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_SEQ_CTL2, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_PS_SEQ_LOOP_MASK) + >> DA7280_PS_SEQ_LOOP_SHIFT; + + return sprintf(buf, "ps_seq_loop is %d\n", val); +} + +/* Valid format for GPIx_SEQUENCE_ID + * echo X > ./gpi_seq_id0 + * Range of X: 0 <= X <= 15 + * ex) + * echo 1 > /sys/class/..../gpi_seq_id0 + * echo 2 > /sys/class/..../gpi_seq_id1 + * echo 3 > /sys/class/..../gpi_seq_id2 + */ +static ssize_t gpi_seq_id0_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_GPI_0_CTL, + DA7280_GPI0_SEQUENCE_ID_MASK, + (val & 0xf) + << DA7280_GPI0_SEQUENCE_ID_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->gpi_ctl[0].seq_id = val & 0xf; + + return count; + +err: + dev_err(dev, "Invalid input\n"); + return count; +} + +static ssize_t gpi_seq_id0_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_GPI_0_CTL, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_GPI0_SEQUENCE_ID_MASK) + >> DA7280_GPI0_SEQUENCE_ID_SHIFT; + + return sprintf(buf, "gpi_seq_id0 is %d\n", val); +} + +static ssize_t gpi_seq_id1_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_GPI_1_CTL, + DA7280_GPI1_SEQUENCE_ID_MASK, + (val & 0xf) + << DA7280_GPI1_SEQUENCE_ID_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->gpi_ctl[1].seq_id = val & 0xf; + + return count; + +err: + dev_err(dev, "Invalid input\n"); + return count; +} + +static ssize_t gpi_seq_id1_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_GPI_1_CTL, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_GPI1_SEQUENCE_ID_MASK) + >> DA7280_GPI1_SEQUENCE_ID_SHIFT; + + return sprintf(buf, "gpi_seq_id1 is %d\n", val); +} + +static ssize_t gpi_seq_id2_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_GPI_2_CTL, + DA7280_GPI2_SEQUENCE_ID_MASK, + (val & 0xf) + << DA7280_GPI2_SEQUENCE_ID_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->gpi_ctl[2].seq_id = val & 0xf; + + return count; + +err: + dev_err(dev, "Invalid input\n"); + return count; +} + +static ssize_t gpi_seq_id2_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_GPI_2_CTL, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_GPI2_SEQUENCE_ID_MASK) + >> DA7280_GPI2_SEQUENCE_ID_SHIFT; + + return sprintf(buf, "gpi_seq_id2 is %d\n", val); +} + +#define MAX_PTN_REGS DA7280_SNP_MEM_SIZE +#define MAX_USER_INPUT_LEN (5 * DA7280_SNP_MEM_SIZE) +struct parse_data_t { + int len; + u8 val[MAX_PTN_REGS]; +}; + +static int da7280_parse_args(struct device *dev, + char *cmd, struct parse_data_t *ptn) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + char *tok; /* used to separate tokens */ + static const char ct[] = " \t"; /* space or tab delimits the tokens */ + int tok_count = 0; /* total number of tokens parsed */ + int i = 0, val; + + ptn->len = 0; + + /* parse the input string */ + while ((tok = strsep(&cmd, ct)) != NULL) { + /* this is a value to be written to the register */ + if (kstrtouint(tok, 0, &val) < 0) { + dev_err(haptics->dev, + "failed to read from %s\n", tok); + break; + } + + if (i < MAX_PTN_REGS) { + ptn->val[i] = val; + i++; + } + tok_count++; + } + + /* decide whether it is a read or write operation based on the + * value of tok_count and count_flag. + * tok_count = 0: no inputs, invalid case. + * tok_count = 1: write one value. + * tok_count > 1: write multiple values/patterns. + */ + switch (tok_count) { + case 0: + return -EINVAL; + case 1: + ptn->len = 1; + break; + default: + ptn->len = i; + } + return 0; +} + +static ssize_t +patterns_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + struct parse_data_t mem; + char cmd[MAX_USER_INPUT_LEN]; + unsigned int val; + int error; + + error = regmap_read(haptics->regmap, DA7280_MEM_CTL1, &val); + if (error) + return error; + + if (count > MAX_USER_INPUT_LEN) + memcpy(cmd, buf, MAX_USER_INPUT_LEN); + else + memcpy(cmd, buf, count); + + /* chop of '\n' introduced by echo at the end of the input */ + if (cmd[count - 1] == '\n') + cmd[count - 1] = '\0'; + + if (da7280_parse_args(dev, cmd, &mem) < 0) + return -EINVAL; + + memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE); + memcpy(haptics->snp_mem, mem.val, mem.len); + + error = da7280_haptic_mem_update(haptics); + if (error) + return error; + + return count; +} + +static DEVICE_ATTR_RW(ps_seq_id); +static DEVICE_ATTR_RW(ps_seq_loop); +static DEVICE_ATTR_RW(gpi_seq_id0); +static DEVICE_ATTR_RW(gpi_seq_id1); +static DEVICE_ATTR_RW(gpi_seq_id2); +static DEVICE_ATTR_WO(patterns); +static struct attribute *da7280_sysfs_attr[] = { + &dev_attr_ps_seq_id.attr, + &dev_attr_ps_seq_loop.attr, + &dev_attr_gpi_seq_id0.attr, + &dev_attr_gpi_seq_id1.attr, + &dev_attr_gpi_seq_id2.attr, + &dev_attr_patterns.attr, + NULL, +}; + +static const struct attribute_group da7280_attr_group = { + .attrs = da7280_sysfs_attr, +}; + +static int da7280_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct da7280_haptic *haptics; + struct input_dev *input_dev; + struct ff_device *ff; + unsigned int period2freq; + int error; + + haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL); + if (!haptics) + return -ENOMEM; + haptics->dev = dev; + + if (!client->irq) { + dev_err(dev, "No IRQ configured\n"); + return -EINVAL; + } + + da7280_parse_properties(&client->dev, haptics); + + if (haptics->const_op_mode == DA7280_PWM_MODE) { + /* Get pwm and regulatot for haptics device */ + haptics->pwm_dev = devm_pwm_get(&client->dev, NULL); + if (IS_ERR(haptics->pwm_dev)) { + dev_err(dev, "failed to get PWM device\n"); + return PTR_ERR(haptics->pwm_dev); + } + + /* + * FIXME: pwm_apply_args() should be removed when switching to + * the atomic PWM API. + */ + pwm_apply_args(haptics->pwm_dev); + + /* Check PWM Period, it must be in 10k ~ 250kHz */ + period2freq = 1000000 / pwm_get_period(haptics->pwm_dev); + if (period2freq < DA7280_MIN_PWM_FREQ_KHZ || + period2freq > DA7280_MAX_PWM_FREQ_KHZ) { + dev_err(dev, "Not supported PWM frequency(%d)\n", + period2freq); + return -EINVAL; + } + } + + INIT_DELAYED_WORK(&haptics->work_duration, da7280_haptic_work_duration); + INIT_WORK(&haptics->work_playback, da7280_haptic_work_playback); + INIT_WORK(&haptics->work_setgain, da7280_haptic_work_setgain); + + haptics->client = client; + i2c_set_clientdata(client, haptics); + + haptics->regmap = + devm_regmap_init_i2c(client, &da7280_haptic_regmap_config); + if (IS_ERR(haptics->regmap)) { + error = PTR_ERR(haptics->regmap); + dev_err(dev, "Failed to allocate register map : %d\n", + error); + return error; + } + + error = da7280_init(haptics); + if (error) { + dev_err(dev, "failed to initialize device\n"); + return error; + } + + /* Initialize input device for haptic device */ + input_dev = devm_input_allocate_device(dev); + if (!input_dev) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + input_dev->name = "da7280-haptic"; + input_dev->dev.parent = client->dev.parent; + input_dev->open = da7280_haptic_open; + input_dev->close = da7280_haptic_close; + input_set_drvdata(input_dev, haptics); + haptics->input_dev = input_dev; + + input_set_capability(haptics->input_dev, EV_FF, FF_PERIODIC); + input_set_capability(haptics->input_dev, EV_FF, FF_CUSTOM); + input_set_capability(haptics->input_dev, EV_FF, FF_CONSTANT); + input_set_capability(haptics->input_dev, EV_FF, FF_GAIN); + + error = input_ff_create(haptics->input_dev, DA7280_FF_EFFECT_COUNT_MAX); + if (error) { + dev_err(dev, "create FF input device failed(%d)\n", + error); + return error; + } + + ff = input_dev->ff; + ff->upload = da7280_haptics_upload_effect; + ff->playback = da7280_haptics_playback; + ff->set_gain = da7280_haptics_set_gain; + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "failed to register input device\n"); + return error; + } + + error = devm_device_add_group(dev, &da7280_attr_group); + if (error) { + dev_err(dev, "Failed to create sysfs attributes: %d\n", + error); + return error; + } + + error = devm_request_threaded_irq(dev, client->irq, NULL, + da7280_irq_handler, + IRQF_ONESHOT, + "da7280-haptics", haptics); + if (error) + dev_err(dev, "Failed to request IRQ : %d\n", client->irq); + + return error; +} + +static int __maybe_unused da7280_suspend(struct device *dev) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error = 0; + + mutex_lock(&haptics->input_dev->mutex); + + da7280_haptic_disable(haptics); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, 0); + if (error) + dev_err(haptics->dev, + "I2C error : %d\n", error); + + mutex_unlock(&haptics->input_dev->mutex); + return error; +} + +static int __maybe_unused da7280_resume(struct device *dev) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error = 0; + + mutex_lock(&haptics->input_dev->mutex); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + dev_err(haptics->dev, + "i2c error : %d\n", error); + + mutex_unlock(&haptics->input_dev->mutex); + return error; +} + +static const struct of_device_id da7280_of_match[] = { + { .compatible = "dlg,da7280", }, + { } +}; +MODULE_DEVICE_TABLE(of, da7280_of_match); + +static const struct i2c_device_id da7280_i2c_id[] = { + { "da7280", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, da7280_i2c_id); + +static SIMPLE_DEV_PM_OPS(da7280_pm_ops, + da7280_suspend, da7280_resume); + +static struct i2c_driver da7280_driver = { + .driver = { + .name = "da7280", + .of_match_table = of_match_ptr(da7280_of_match), + .pm = &da7280_pm_ops, + }, + .probe = da7280_probe, + .id_table = da7280_i2c_id, +}; +module_i2c_driver(da7280_driver); + +MODULE_DESCRIPTION("DA7280 haptics driver"); +MODULE_AUTHOR("Roy Im <Roy.Im.Opensource@diasemi.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/da7280.h b/drivers/input/misc/da7280.h new file mode 100644 index 0000000..b234e62 --- /dev/null +++ b/drivers/input/misc/da7280.h @@ -0,0 +1,412 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * DA7280 Haptic device driver registers + * + * Copyright (c) 2019 Dialog Semiconductor. + * Author: Roy Im <Roy.Im.Opensource@diasemi.com> + */ + +#ifndef _DA7280_REG_DEFS_H +#define _DA7280_REG_DEFS_H + +#include <linux/bitops.h> + +/* Registers */ + +#define DA7280_CHIP_REV 0x00 +#define DA7280_IRQ_EVENT1 0x03 +#define DA7280_IRQ_EVENT_WARNING_DIAG 0x04 +#define DA7280_IRQ_EVENT_SEQ_DIAG 0x05 +#define DA7280_IRQ_STATUS1 0x06 +#define DA7280_IRQ_MASK1 0x07 +#define DA7280_CIF_I2C1 0x08 +#define DA7280_FRQ_LRA_PER_H 0x0A +#define DA7280_FRQ_LRA_PER_L 0x0B +#define DA7280_ACTUATOR1 0x0C +#define DA7280_ACTUATOR2 0x0D +#define DA7280_ACTUATOR3 0x0E +#define DA7280_CALIB_V2I_H 0x0F +#define DA7280_CALIB_V2I_L 0x10 +#define DA7280_CALIB_IMP_H 0x11 +#define DA7280_CALIB_IMP_L 0x12 +#define DA7280_TOP_CFG1 0x13 +#define DA7280_TOP_CFG2 0x14 +#define DA7280_TOP_CFG3 0x15 +#define DA7280_TOP_CFG4 0x16 +#define DA7280_TOP_INT_CFG1 0x17 +#define DA7280_TOP_INT_CFG6_H 0x1C +#define DA7280_TOP_INT_CFG6_L 0x1D +#define DA7280_TOP_INT_CFG7_H 0x1E +#define DA7280_TOP_INT_CFG7_L 0x1F +#define DA7280_TOP_INT_CFG8 0x20 +#define DA7280_TOP_CTL1 0x22 +#define DA7280_TOP_CTL2 0x23 +#define DA7280_SEQ_CTL1 0x24 +#define DA7280_SWG_C1 0x25 +#define DA7280_SWG_C2 0x26 +#define DA7280_SWG_C3 0x27 +#define DA7280_SEQ_CTL2 0x28 +#define DA7280_GPI_0_CTL 0x29 +#define DA7280_GPI_1_CTL 0x2A +#define DA7280_GPI_2_CTL 0x2B +#define DA7280_MEM_CTL1 0x2C +#define DA7280_MEM_CTL2 0x2D +#define DA7280_ADC_DATA_H1 0x2E +#define DA7280_ADC_DATA_L1 0x2F +#define DA7280_POLARITY 0x43 +#define DA7280_LRA_AVR_H 0x44 +#define DA7280_LRA_AVR_L 0x45 +#define DA7280_FRQ_LRA_PER_ACT_H 0x46 +#define DA7280_FRQ_LRA_PER_ACT_L 0x47 +#define DA7280_FRQ_PHASE_H 0x48 +#define DA7280_FRQ_PHASE_L 0x49 +#define DA7280_FRQ_CTL 0x4C +#define DA7280_TRIM3 0x5F +#define DA7280_TRIM4 0x60 +#define DA7280_TRIM6 0x62 +#define DA7280_TOP_CFG5 0x6E +#define DA7280_IRQ_EVENT_ACTUATOR_FAULT 0x81 +#define DA7280_IRQ_STATUS2 0x82 +#define DA7280_IRQ_MASK2 0x83 +#define DA7280_SNP_MEM_0 0x84 +#define DA7280_SNP_MEM_99 0xE7 + +/* DA7280_CHIP_REV (Address 0x00) */ +#define DA7280_CHIP_REV_MAJOR_SHIFT 0 +#define DA7280_CHIP_REV_MAJOR_MASK (15 << 0) +#define DA7280_CHIP_REV_MINOR_SHIFT 4 +#define DA7280_CHIP_REV_MINOR_MASK (15 << 4) + +/* DA7280_IRQ_EVENT1 (Address 0x03) */ +#define DA7280_E_SEQ_CONTINUE_SHIFT 0 +#define DA7280_E_SEQ_CONTINUE_MASK BIT(0) +#define DA7280_E_UVLO_SHIFT 1 +#define DA7280_E_UVLO_MASK BIT(1) +#define DA7280_E_SEQ_DONE_SHIFT 2 +#define DA7280_E_SEQ_DONE_MASK BIT(2) +#define DA7280_E_OVERTEMP_CRIT_SHIFT 3 +#define DA7280_E_OVERTEMP_CRIT_MASK BIT(3) +#define DA7280_E_SEQ_FAULT_SHIFT 4 +#define DA7280_E_SEQ_FAULT_MASK BIT(4) +#define DA7280_E_WARNING_SHIFT 5 +#define DA7280_E_WARNING_MASK BIT(5) +#define DA7280_E_ACTUATOR_FAULT_SHIFT 6 +#define DA7280_E_ACTUATOR_FAULT_MASK BIT(6) +#define DA7280_E_OC_FAULT_SHIFT 7 +#define DA7280_E_OC_FAULT_MASK BIT(7) + +/* DA7280_IRQ_EVENT_WARNING_DIAG (Address 0x04) */ +#define DA7280_E_OVERTEMP_WARN_SHIFT 3 +#define DA7280_E_OVERTEMP_WARN_MASK BIT(3) +#define DA7280_E_MEM_TYPE_SHIFT 4 +#define DA7280_E_MEM_TYPE_MASK BIT(4) +#define DA7280_E_LIM_DRIVE_ACC_SHIFT 6 +#define DA7280_E_LIM_DRIVE_ACC_MASK BIT(6) +#define DA7280_E_LIM_DRIVE_SHIFT 7 +#define DA7280_E_LIM_DRIVE_MASK BIT(7) + +/* DA7280_IRQ_EVENT_PAT_DIAG (Address 0x05) */ +#define DA7280_E_PWM_FAULT_SHIFT 5 +#define DA7280_E_PWM_FAULT_MASK BIT(5) +#define DA7280_E_MEM_FAULT_SHIFT 6 +#define DA7280_E_MEM_FAULT_MASK BIT(6) +#define DA7280_E_SEQ_ID_FAULT_SHIFT 7 +#define DA7280_E_SEQ_ID_FAULT_MASK BIT(7) + +/* DA7280_IRQ_STATUS1 (Address 0x06) */ +#define DA7280_STA_SEQ_CONTINUE_SHIFT 0 +#define DA7280_STA_SEQ_CONTINUE_MASK BIT(0) +#define DA7280_STA_UVLO_VBAT_OK_SHIFT 1 +#define DA7280_STA_UVLO_VBAT_OK_MASK BIT(1) +#define DA7280_STA_SEQ_DONE_SHIFT 2 +#define DA7280_STA_SEQ_DONE_MASK BIT(2) +#define DA7280_STA_OVERTEMP_CRIT_SHIFT 3 +#define DA7280_STA_OVERTEMP_CRIT_MASK BIT(3) +#define DA7280_STA_SEQ_FAULT_SHIFT 4 +#define DA7280_STA_SEQ_FAULT_MASK BIT(4) +#define DA7280_STA_WARNING_SHIFT 5 +#define DA7280_STA_WARNING_MASK BIT(5) +#define DA7280_STA_ACTUATOR_SHIFT 6 +#define DA7280_STA_ACTUATOR_MASK BIT(6) +#define DA7280_STA_OC_SHIFT 7 +#define DA7280_STA_OC_MASK BIT(7) + +/* DA7280_IRQ_MASK1 (Address 0x07) */ +#define DA7280_SEQ_CONTINUE_M_SHIFT 0 +#define DA7280_SEQ_CONTINUE_M_MASK BIT(0) +#define DA7280_E_UVLO_M_SHIFT 1 +#define DA7280_E_UVLO_M_MASK BIT(1) +#define DA7280_SEQ_DONE_M_SHIFT 2 +#define DA7280_SEQ_DONE_M_MASK BIT(2) +#define DA7280_OVERTEMP_CRIT_M_SHIFT 3 +#define DA7280_OVERTEMP_CRIT_M_MASK BIT(3) +#define DA7280_SEQ_FAULT_M_SHIFT 4 +#define DA7280_SEQ_FAULT_M_MASK BIT(4) +#define DA7280_WARNING_M_SHIFT 5 +#define DA7280_WARNING_M_MASK BIT(5) +#define DA7280_ACTUATOR_M_SHIFT 6 +#define DA7280_ACTUATOR_M_MASK BIT(6) +#define DA7280_OC_M_SHIFT 7 +#define DA7280_OC_M_MASK BIT(7) + +/* DA7280_CIF_I2C1 (Address 0x08) */ +#define DA7280_I2C_TO_ENABLE_SHIFT 6 +#define DA7280_I2C_TO_ENABLE_MASK BIT(6) +#define DA7280_I2C_WR_MODE_SHIFT 7 +#define DA7280_I2C_WR_MODE_MASK BIT(7) + +/* DA7280_FRQ_LRA_PER_H (Address 0x0a) */ +#define DA7280_LRA_PER_H_SHIFT 0 +#define DA7280_LRA_PER_H_MASK (255 << 0) + +/* DA7280_FRQ_LRA_PER_L (Address 0x0b) */ +#define DA7280_LRA_PER_L_SHIFT 0 +#define DA7280_LRA_PER_L_MASK (127 << 0) + +/* DA7280_ACTUATOR1 (Address 0x0c) */ +#define DA7280_ACTUATOR_NOMMAX_SHIFT 0 +#define DA7280_ACTUATOR_NOMMAX_MASK (255 << 0) + +/* DA7280_ACTUATOR2 (Address 0x0d) */ +#define DA7280_ACTUATOR_ABSMAX_SHIFT 0 +#define DA7280_ACTUATOR_ABSMAX_MASK (255 << 0) + +/* DA7280_ACTUATOR3 (Address 0x0e) */ +#define DA7280_IMAX_SHIFT 0 +#define DA7280_IMAX_MASK (31 << 0) + +/* DA7280_CALIB_V2I_H (Address 0x0f) */ +#define DA7280_V2I_FACTOR_H_SHIFT 0 +#define DA7280_V2I_FACTOR_H_MASK (255 << 0) + +/* DA7280_CALIB_V2I_L (Address 0x10) */ +#define DA7280_V2I_FACTOR_L_SHIFT 0 +#define DA7280_V2I_FACTOR_L_MASK (255 << 0) + +/* DA7280_CALIB_IMP_H (Address 0x11) */ +#define DA7280_IMPEDANCE_H_SHIFT 0 +#define DA7280_IMPEDANCE_H_MASK (255 << 0) + +/* DA7280_CALIB_IMP_L (Address 0x12) */ +#define DA7280_IMPEDANCE_L_SHIFT 0 +#define DA7280_IMPEDANCE_L_MASK (3 << 0) + +/* DA7280_TOP_CFG1 (Address 0x13) */ +#define DA7280_AMP_PID_EN_SHIFT 0 +#define DA7280_AMP_PID_EN_MASK BIT(0) +#define DA7280_RAPID_STOP_EN_SHIFT 1 +#define DA7280_RAPID_STOP_EN_MASK BIT(1) +#define DA7280_ACCELERATION_EN_SHIFT 2 +#define DA7280_ACCELERATION_EN_MASK BIT(2) +#define DA7280_FREQ_TRACK_EN_SHIFT 3 +#define DA7280_FREQ_TRACK_EN_MASK BIT(3) +#define DA7280_BEMF_SENSE_EN_SHIFT 4 +#define DA7280_BEMF_SENSE_EN_MASK BIT(4) +#define DA7280_ACTUATOR_TYPE_SHIFT 5 +#define DA7280_ACTUATOR_TYPE_MASK BIT(5) +#define DA7280_EMBEDDED_MODE_SHIFT 7 +#define DA7280_EMBEDDED_MODE_MASK BIT(7) + +/* DA7280_TOP_CFG2 (Address 0x14) */ +#define DA7280_FULL_BRAKE_THR_SHIFT 0 +#define DA7280_FULL_BRAKE_THR_MASK (15 << 0) +#define DA7280_MEM_DATA_SIGNED_SHIFT 4 +#define DA7280_MEM_DATA_SIGNED_MASK BIT(4) + +/* DA7280_TOP_CFG3 (Address 0x15) */ +#define DA7280_VDD_MARGIN_SHIFT 0 +#define DA7280_VDD_MARGIN_MASK (15 << 0) + +/* DA7280_TOP_CFG4 (Address 0x16) */ +#define DA7280_TST_CALIB_IMPEDANCE_DIS_SHIFT 6 +#define DA7280_TST_CALIB_IMPEDANCE_DIS_MASK BIT(6) +#define DA7280_V2I_FACTOR_FREEZE_SHIFT 7 +#define DA7280_V2I_FACTOR_FREEZE_MASK BIT(7) + +/* DA7280_TOP_INT_CFG1 (Address 0x17) */ +#define DA7280_BEMF_FAULT_LIM_SHIFT 0 +#define DA7280_BEMF_FAULT_LIM_MASK (3 << 0) +#define DA7280_FRQ_LOCKED_LIM_SHIFT 2 +#define DA7280_FRQ_LOCKED_LIM_MASK (63 << 2) + +/* DA7280_TOP_INT_CFG6_H (Address 0x1c) */ +#define DA7280_FRQ_PID_KP_H_SHIFT 0 +#define DA7280_FRQ_PID_KP_H_MASK (255 << 0) + +/* DA7280_TOP_INT_CFG6_L (Address 0x1d) */ +#define DA7280_FRQ_PID_KP_L_SHIFT 0 +#define DA7280_FRQ_PID_KP_L_MASK (255 << 0) + +/* DA7280_TOP_INT_CFG7_H (Address 0x1e) */ +#define DA7280_FRQ_PID_KI_H_SHIFT 0 +#define DA7280_FRQ_PID_KI_H_MASK (255 << 0) + +/* DA7280_TOP_INT_CFG7_L (Address 0x1f) */ +#define DA7280_FRQ_PID_KI_L_SHIFT 0 +#define DA7280_FRQ_PID_KI_L_MASK (255 << 0) + +/* DA7280_TOP_INT_CFG8 (Address 0x20) */ +#define DA7280_TST_FRQ_TRACK_BEMF_LIM_SHIFT 0 +#define DA7280_TST_FRQ_TRACK_BEMF_LIM_MASK (15 << 0) +#define DA7280_TST_AMP_RAPID_STOP_LIM_SHIFT 4 +#define DA7280_TST_AMP_RAPID_STOP_LIM_MASK (7 << 4) + +/* DA7280_TOP_CTL1 (Address 0x22) */ +#define DA7280_OPERATION_MODE_SHIFT 0 +#define DA7280_OPERATION_MODE_MASK (7 << 0) +#define DA7280_STANDBY_EN_SHIFT 3 +#define DA7280_STANDBY_EN_MASK BIT(3) +#define DA7280_SEQ_START_SHIFT 4 +#define DA7280_SEQ_START_MASK BIT(4) + +/* DA7280_TOP_CTL2 (Address 0x23) */ +#define DA7280_OVERRIDE_VAL_SHIFT 0 +#define DA7280_OVERRIDE_VAL_MASK (255 << 0) + +/* DA7280_SEQ_CTL1 (Address 0x24) */ +#define DA7280_SEQ_CONTINUE_SHIFT 0 +#define DA7280_SEQ_CONTINUE_MASK BIT(0) +#define DA7280_WAVEGEN_MODE_SHIFT 1 +#define DA7280_WAVEGEN_MODE_MASK BIT(1) +#define DA7280_FREQ_WAVEFORM_TIMEBASE_SHIFT 2 +#define DA7280_FREQ_WAVEFORM_TIMEBASE_MASK BIT(2) + +/* DA7280_SWG_C1 (Address 0x25) */ +#define DA7280_CUSTOM_WAVE_GEN_COEFF1_SHIFT 0 +#define DA7280_CUSTOM_WAVE_GEN_COEFF1_MASK (255 << 0) + +/* DA7280_SWG_C2 (Address 0x26) */ +#define DA7280_CUSTOM_WAVE_GEN_COEFF2_SHIFT 0 +#define DA7280_CUSTOM_WAVE_GEN_COEFF2_MASK (255 << 0) + +/* DA7280_SWG_C3 (Address 0x27) */ +#define DA7280_CUSTOM_WAVE_GEN_COEFF3_SHIFT 0 +#define DA7280_CUSTOM_WAVE_GEN_COEFF3_MASK (255 << 0) + +/* DA7280_SEQ_CTL2 (Address 0x28) */ +#define DA7280_PS_SEQ_ID_SHIFT 0 +#define DA7280_PS_SEQ_ID_MASK (15 << 0) +#define DA7280_PS_SEQ_LOOP_SHIFT 4 +#define DA7280_PS_SEQ_LOOP_MASK (15 << 4) + +/* DA7280_GPIO_0_CTL (Address 0x29) */ +#define DA7280_GPI0_POLARITY_SHIFT 0 +#define DA7280_GPI0_POLARITY_MASK (3 << 0) +#define DA7280_GPI0_MODE_SHIFT 2 +#define DA7280_GPI0_MODE_MASK BIT(2) +#define DA7280_GPI0_SEQUENCE_ID_SHIFT 3 +#define DA7280_GPI0_SEQUENCE_ID_MASK (15 << 3) + +/* DA7280_GPIO_1_CTL (Address 0x2a) */ +#define DA7280_GPI1_POLARITY_SHIFT 0 +#define DA7280_GPI1_POLARITY_MASK (3 << 0) +#define DA7280_GPI1_MODE_SHIFT 2 +#define DA7280_GPI1_MODE_MASK BIT(2) +#define DA7280_GPI1_SEQUENCE_ID_SHIFT 3 +#define DA7280_GPI1_SEQUENCE_ID_MASK (15 << 3) + +/* DA7280_GPIO_2_CTL (Address 0x2b) */ +#define DA7280_GPI2_POLARITY_SHIFT 0 +#define DA7280_GPI2_POLARITY_MASK (3 << 0) +#define DA7280_GPI2_MODE_SHIFT 2 +#define DA7280_GPI2_MODE_MASK BIT(2) +#define DA7280_GPI2_SEQUENCE_ID_SHIFT 3 +#define DA7280_GPI2_SEQUENCE_ID_MASK (15 << 3) + +/* DA7280_MEM_CTL1 (Address 0x2c) */ +#define DA7280_WAV_MEM_BASE_ADDR_SHIFT 0 +#define DA7280_WAV_MEM_BASE_ADDR_MASK (255 << 0) + +/* DA7280_MEM_CTL2 (Address 0x2d) */ +#define DA7280_WAV_MEM_LOCK_SHIFT 7 +#define DA7280_WAV_MEM_LOCK_MASK BIT(7) + +/* DA7280_ADC_DATA_H1 (Address 0x2e) */ +#define DA7280_ADC_VDD_H_SHIFT 0 +#define DA7280_ADC_VDD_H_MASK (255 << 0) + +/* DA7280_ADC_DATA_L1 (Address 0x2f) */ +#define DA7280_ADC_VDD_L_SHIFT 0 +#define DA7280_ADC_VDD_L_MASK (127 << 0) + +/* DA7280_POLARITY (Address 0x43) */ +#define DA7280_POLARITY_SHIFT 0 +#define DA7280_POLARITY_MASK BIT(0) + +/* DA7280_LRA_AVR_H (Address 0x44) */ +#define DA7280_LRA_PER_AVERAGE_H_SHIFT 0 +#define DA7280_LRA_PER_AVERAGE_H_MASK (255 << 0) + +/* DA7280_LRA_AVR_L (Address 0x45) */ +#define DA7280_LRA_PER_AVERAGE_L_SHIFT 0 +#define DA7280_LRA_PER_AVERAGE_L_MASK (127 << 0) + +/* DA7280_FRQ_LRA_PER_ACT_H (Address 0x46) */ +#define DA7280_LRA_PER_ACTUAL_H_SHIFT 0 +#define DA7280_LRA_PER_ACTUAL_H_MASK (255 << 0) + +/* DA7280_FRQ_LRA_PER_ACT_L (Address 0x47) */ +#define DA7280_LRA_PER_ACTUAL_L_SHIFT 0 +#define DA7280_LRA_PER_ACTUAL_L_MASK (127 << 0) + +/* DA7280_FRQ_PHASE_H (Address 0x48) */ +#define DA7280_DELAY_H_SHIFT 0 +#define DA7280_DELAY_H_MASK (255 << 0) + +/* DA7280_FRQ_PHASE_L (Address 0x49) */ +#define DA7280_DELAY_SHIFT_L_SHIFT 0 +#define DA7280_DELAY_SHIFT_L_MASK (7 << 0) +#define DA7280_DELAY_FREEZE_SHIFT 7 +#define DA7280_DELAY_FREEZE_MASK BIT(7) + +/* DA7280_FRQ_CTL (Address 0x4c) */ +#define DA7280_FREQ_TRACKING_FORCE_ON_SHIFT 0 +#define DA7280_FREQ_TRACKING_FORCE_ON_MASK BIT(0) +#define DA7280_FREQ_TRACKING_AUTO_ADJ_SHIFT 1 +#define DA7280_FREQ_TRACKING_AUTO_ADJ_MASK BIT(1) + +/* DA7280_TRIM3 (Address 0x5f) */ +#define DA7280_REF_UVLO_THRES_SHIFT 3 +#define DA7280_REF_UVLO_THRES_MASK (3 << 3) +#define DA7280_LOOP_FILT_LOW_BW_SHIFT 5 +#define DA7280_LOOP_FILT_LOW_BW_MASK BIT(5) +#define DA7280_LOOP_IDAC_DOUBLE_RANGE_SHIFT 6 +#define DA7280_LOOP_IDAC_DOUBLE_RANGE_MASK BIT(6) + +/* DA7280_TRIM4 (Address 0x60) */ +#define DA7280_LOOP_FILT_RES_TRIM_SHIFT 0 +#define DA7280_LOOP_FILT_RES_TRIM_MASK (3 << 0) +#define DA7280_LOOP_FILT_CAP_TRIM_SHIFT 2 +#define DA7280_LOOP_FILT_CAP_TRIM_MASK (3 << 2) + +/* DA7280_TRIM6 (Address 0x62) */ +#define DA7280_HBRIDGE_ERC_HS_TRIM_SHIFT 0 +#define DA7280_HBRIDGE_ERC_HS_TRIM_MASK (3 << 0) +#define DA7280_HBRIDGE_ERC_LS_TRIM_SHIFT 2 +#define DA7280_HBRIDGE_ERC_LS_TRIM_MASK (3 << 2) + +/* DA7280_TOP_CFG5 (Address 0x6e) */ +#define DA7280_V2I_FACTOR_OFFSET_EN_SHIFT 0 +#define DA7280_V2I_FACTOR_OFFSET_EN_MASK BIT(0) +#define DA7280_FRQ_PAUSE_ON_POLARITY_CHANGE_SHIFT 1 +#define DA7280_FRQ_PAUSE_ON_POLARITY_CHANGE_MASK BIT(1) +#define DA7280_DELAY_BYPASS_SHIFT 2 +#define DA7280_DELAY_BYPASS_MASK BIT(2) + +/* DA7280_IRQ_EVENT_ACTUATOR_FAULT (Address 0x81) */ +#define DA7280_ADC_SAT_FAULT_SHIFT 2 +#define DA7280_ADC_SAT_FAULT_MASK BIT(2) + +/* DA7280_IRQ_STATUS2 (Address 0x82) */ +#define DA7280_STA_ADC_SAT_SHIFT 7 +#define DA7280_STA_ADC_SAT_MASK BIT(7) + +/* DA7280_IRQ_MASK2 (Address 0x83) */ +#define DA7280_ADC_SAT_M_SHIFT 7 +#define DA7280_ADC_SAT_M_MASK BIT(7) + +/* DA7280_SNP_MEM_XX (Address 0x84 ~ 0xe7) */ +#define DA7280_SNP_MEM_SHIFT 0 +#define DA7280_SNP_MEM_MASK (255 << 0) + +#endif -- end-of-patch for RESEND PATCH V8 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [RESEND PATCH V8 3/3] Input: new da7280 haptic driver @ 2020-02-11 1:13 ` Roy Im 0 siblings, 0 replies; 7+ messages in thread From: Roy Im @ 2020-02-11 1:13 UTC (permalink / raw) To: Uwe Kleine-Koenig, Bartosz Golaszewski, Brian Masney, Dmitry Torokhov, Greg KH, Lee Jones, Luca Weiss, Maximilian Luz, Pascal PAILLET-LME, Rob Herring, Samuel Ortiz, Thierry Reding, Thomas Gleixner Cc: Support Opensource, linux-input, linux-kernel, linux-pwm Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple mode and integrated waveform memory and wideband support. It communicates via an I2C bus to the device. Signed-off-by: Roy Im <roy.im.opensource@diasemi.com> --- v8: - Added changes to support FF_PERIODIC/FF_CUSTOM and FF_CONSTANT. - Updated the dt-related code. - Removed memless related functions. v7: - Added more attributes to handle one value per file. - Replaced and updated the dt-related code and functions called. - Fixed error/functions. - Rebased to v4.19-rc6. v6: No changes. v5: Fixed errors in Kconfig file. v4: Updated code as dt-bindings are changed. v3: No changes. v2: Fixed kbuild error/warning drivers/input/misc/Kconfig | 13 + drivers/input/misc/Makefile | 1 + drivers/input/misc/da7280.c | 1688 +++++++++++++++++++++++++++++++++++++++++++ drivers/input/misc/da7280.h | 412 +++++++++++ 4 files changed, 2114 insertions(+) create mode 100644 drivers/input/misc/da7280.c create mode 100644 drivers/input/misc/da7280.h diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7e2e658..e2bf442 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -879,4 +879,17 @@ config INPUT_STPMIC1_ONKEY To compile this driver as a module, choose M here: the module will be called stpmic1_onkey. +config INPUT_DA7280_HAPTICS + tristate "Dialog Semiconductor DA7280 haptics support" + depends on INPUT && I2C + select INPUT_FF_MEMLESS + select REGMAP_I2C + help + Say Y to enable support for the Dialog DA7280 haptics driver. + The haptics can be controlled by i2c communication, + or by PWM input, or by GPI. + + To compile this driver as a module, choose M here: the + module will be called da7280. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 8fd187f..71dc381 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_CPCAP_PWRBUTTON) += cpcap-pwrbutton.o +obj-$(CONFIG_INPUT_DA7280_HAPTICS) += da7280.o obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o diff --git a/drivers/input/misc/da7280.c b/drivers/input/misc/da7280.c new file mode 100644 index 0000000..4d1d1fc --- /dev/null +++ b/drivers/input/misc/da7280.c @@ -0,0 +1,1688 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DA7280 Haptic device driver + * + * Copyright (c) 2019 Dialog Semiconductor. + * Author: Roy Im <Roy.Im.Opensource@diasemi.com> + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/workqueue.h> +#include <linux/uaccess.h> +#include "da7280.h" + +/* uV unit for voltage rate */ +#define DA7280_VOLTAGE_RATE_MAX 6000000 +#define DA7280_VOLTAGE_RATE_STEP 23400 +#define DA7280_NOMMAX_DFT 0x6B +#define DA7280_ABSMAX_DFT 0x78 + +#define DA7280_IMPD_MAX 1500000000 +#define DA7280_IMPD_DEFAULT 22000000 + +#define DA7280_IMAX_DEFAULT 0x0E +/* uA unit step and limit for IMAX*/ +#define DA7280_IMAX_STEP 7200 +#define DA7280_IMAX_LIMIT 252000 + +#define DA7280_RESONT_FREQH_DFT 0x39 +#define DA7280_RESONT_FREQL_DFT 0x32 +#define DA7280_MIN_RESONAT_FREQ_HZ 50 +#define DA7280_MAX_RESONAT_FREQ_HZ 300 +#define DA7280_MIN_PWM_FREQ_KHZ 10 +#define DA7280_MAX_PWM_FREQ_KHZ 250 + +#define DA7280_SEQ_ID_MAX 15 +#define DA7280_SEQ_LOOP_MAX 15 +#define DA7280_GPI1_SEQ_ID_DEFT 0x0 + +#define DA7280_SNP_MEM_SIZE 100 +#define DA7280_SNP_MEM_MAX DA7280_SNP_MEM_99 + +#define IRQ_NUM 3 + +#define DA7280_SKIP_INIT 0x100 + +#define DA7280_FF_EFFECT_COUNT_MAX 15 + +enum da7280_haptic_dev_t { + DA7280_LRA = 0, + DA7280_ERM_BAR = 1, + DA7280_ERM_COIN = 2, + DA7280_DEV_MAX, +}; + +enum da7280_op_mode { + DA7280_INACTIVE = 0, + DA7280_DRO_MODE = 1, + DA7280_PWM_MODE = 2, + DA7280_RTWM_MODE = 3, + DA7280_ETWM_MODE = 4, + DA7280_OPMODE_MAX, +}; + +#define DA7280_FF_CONSTANT_DRO 1 +#define DA7280_FF_PERIODIC_PWM 2 +#define DA7280_FF_PERIODIC_RTWM 1 +#define DA7280_FF_PERIODIC_ETWM 2 + +#define DA7280_FF_PERIODIC_MODE DA7280_RTWM_MODE +#define DA7280_FF_CONSTANT_MODE DA7280_DRO_MODE + +enum da7280_custom_effect_param { + DA7280_CUSTOM_DATA_SEQ_ID_IDX = 0, + DA7280_CUSTOM_DATA_SEQ_LOOP_IDX = 1, + DA7280_CUSTOM_DATA_LEN = 2, +}; + +struct da7280_gpi_ctl { + u8 seq_id; + u8 mode; + u8 polarity; +}; + +struct da7280_haptic { + struct regmap *regmap; + struct input_dev *input_dev; + struct device *dev; + struct i2c_client *client; + struct pwm_device *pwm_dev; + + bool legacy; + int pwm_id; + struct delayed_work work_duration; + struct work_struct work_playback; + struct work_struct work_setgain; + int val; + u16 gain; + + s16 level; + + u8 dev_type; + u8 op_mode; + u8 const_op_mode; + u8 periodic_op_mode; + u16 nommax; + u16 absmax; + u32 imax; + u32 impd; + u32 resonant_freq_h; + u32 resonant_freq_l; + bool bemf_sense_en; + bool freq_track_en; + bool acc_en; + bool rapid_stop_en; + bool amp_pid_en; + u8 ps_seq_id; + u8 ps_seq_loop; + struct da7280_gpi_ctl gpi_ctl[3]; + bool mem_update; + u8 snp_mem[DA7280_SNP_MEM_SIZE]; + u8 enabled; + int length_ms; +}; + +static bool da7280_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case DA7280_IRQ_EVENT1: + case DA7280_IRQ_EVENT_WARNING_DIAG: + case DA7280_IRQ_EVENT_SEQ_DIAG: + case DA7280_IRQ_STATUS1: + case DA7280_TOP_CTL1: + return true; + default: + return false; + } +} + +static const struct regmap_config da7280_haptic_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = DA7280_SNP_MEM_MAX, + .volatile_reg = da7280_volatile_register, +}; + +static int da7280_haptic_mem_update(struct da7280_haptic *haptics) +{ + int error; + unsigned int val; + + /* It is recommended to update the patterns + * during haptic is not working in order to avoid conflict + */ + error = regmap_read(haptics->regmap, DA7280_IRQ_STATUS1, &val); + if (error) + return error; + if (val & DA7280_STA_WARNING_MASK) { + dev_warn(haptics->dev, + "Warning! Please check HAPTIC status.\n"); + return -EBUSY; + } + + /* Patterns are not updated if the lock bit is enabled */ + val = 0; + error = regmap_read(haptics->regmap, DA7280_MEM_CTL2, &val); + if (error) + return error; + if (~val & DA7280_WAV_MEM_LOCK_MASK) { + dev_warn(haptics->dev, + "Please unlock the bit first\n"); + return -EACCES; + } + + /* Set to Inactive mode to make sure safety */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, + 0); + if (error) + return error; + + error = regmap_read(haptics->regmap, DA7280_MEM_CTL1, &val); + if (error) + return error; + + return regmap_bulk_write(haptics->regmap, val, + haptics->snp_mem, DA7280_SNP_MEM_MAX - val + 1); +} + +static int da7280_haptic_set_pwm(struct da7280_haptic *haptics) +{ + struct pwm_args pargs; + u64 period_mag_multi; + unsigned int pwm_duty; + int error; + + pwm_get_args(haptics->pwm_dev, &pargs); + period_mag_multi = + (u64)(pargs.period * haptics->gain); + if (haptics->acc_en) + pwm_duty = + (unsigned int)(period_mag_multi >> 16); + else + pwm_duty = + (unsigned int)((period_mag_multi >> 16) + + pargs.period) / 2; + + error = pwm_config(haptics->pwm_dev, + pwm_duty, pargs.period); + if (error) { + dev_err(haptics->dev, + "failed to configure pwm : %d\n", error); + return error; + } + + error = pwm_enable(haptics->pwm_dev); + if (error) { + pwm_disable(haptics->pwm_dev); + dev_err(haptics->dev, + "failed to enable haptics pwm device : %d\n", error); + } + + return error; +} + +static void da7280_haptic_enable(struct da7280_haptic *haptics) +{ + int error = 0; + + if (haptics->enabled) + return; + + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + /* the valid range check when acc_en is enabled */ + if (haptics->acc_en && haptics->level > 0x7F) + haptics->level = 0x7F; + else if (haptics->level > 0xFF) + haptics->level = 0xFF; + + /* Set driver level + * as a % of ACTUATOR_NOMMAX(nommax) + */ + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, + haptics->level); + if (error) { + dev_err(haptics->dev, + "i2c err (%d) for driving level (%d)\n", + error, haptics->level); + return; + } + break; + case DA7280_PWM_MODE: + if (da7280_haptic_set_pwm(haptics)) + return; + break; + case DA7280_RTWM_MODE: + /* The pattern will be played by + * the PS_SEQ_ID and the PS_SEQ_LOOP + */ + case DA7280_ETWM_MODE: + /* The pattern will be played by + * the GPI[N] state, GPI(N)_SEQUENCE_ID + * and the PS_SEQ_LOOP. + * please see the datasheet for the details. + */ + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d)\n", haptics->op_mode); + return; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, + haptics->op_mode); + if (error) { + dev_err(haptics->dev, + "i2c err for op_mode setting : %d\n", error); + return; + } + + if (haptics->op_mode == DA7280_PWM_MODE || + haptics->op_mode == DA7280_RTWM_MODE) { + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_SEQ_START_MASK, + DA7280_SEQ_START_MASK); + if (error) { + dev_err(haptics->dev, + "i2c err for sequence triggering : %d\n", + error); + return; + } + } + + haptics->enabled = true; + if (haptics->length_ms && haptics->op_mode == DA7280_DRO_MODE) + schedule_delayed_work(&haptics->work_duration, + msecs_to_jiffies(haptics->length_ms)); +} + +static void da7280_haptic_disable(struct da7280_haptic *haptics) +{ + int error; + + if (!haptics->enabled) + return; + + /* Set to Inactive mode */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for op_mode off : %d\n", error); + return; + } + + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for DRO mode off : %d\n", + error); + return; + } + break; + case DA7280_PWM_MODE: + pwm_disable(haptics->pwm_dev); + break; + case DA7280_RTWM_MODE: + case DA7280_ETWM_MODE: + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_SEQ_START_MASK, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for RTWM or ETWM mode off : %d\n", + error); + return; + } + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d)\n", haptics->op_mode); + return; + } + + haptics->enabled = false; +} + +static void da7280_haptic_work_duration(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_duration.work); + + da7280_haptic_disable(haptics); +} + +static void da7280_haptic_work_playback(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_playback); + int val = haptics->val; + + if (!!val) + da7280_haptic_enable(haptics); + else + da7280_haptic_disable(haptics); +} + +static void da7280_haptic_work_setgain(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_setgain); + u16 gain = haptics->gain; + int error = 0; + + if (gain == 0) + return; + + if (gain > 0x7fff) + gain = 0x7fff; + + /* DRO and PWM modes support set_gain feature + */ + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + if (haptics->acc_en == 1) { + haptics->level = (u8)(gain * 0x7F / 0x7fff); + } else if (haptics->acc_en == 0) { + haptics->level = (u8)(gain * 0xFF / 0x7fff); + + if (gain <= 0x3FFF) + haptics->level = haptics->level + 0x80; + else if (gain > 0x3FFF) + haptics->level = haptics->level - 0x80; + } else { + dev_err(haptics->dev, "Invalid acc_en %d.\n", + haptics->acc_en); + } + + /* Set driver level + * as a % of ACTUATOR_NOMMAX(nommax) + */ + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, + haptics->level); + if (error) { + dev_err(haptics->dev, + "i2c err for driving level set : %d\n", + error); + return; + } + break; + case DA7280_PWM_MODE: + haptics->gain = gain; + if (haptics->enabled) { + if (da7280_haptic_set_pwm(haptics)) + return; + } + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d). Change to DRM (Constant) mode.\n", + haptics->op_mode); + break; + } +} + +static int da7280_haptics_upload_effect(struct input_dev *dev, + struct ff_effect *effect, + struct ff_effect *old) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + int error; + s16 level; + int tmp, i; + unsigned int val; + s16 data[DA7280_SNP_MEM_SIZE] = {0,}; + + switch (effect->type) { + /* DRO/PWM modes support this type */ + case FF_CONSTANT: + haptics->op_mode = haptics->const_op_mode; + /* effect->replay.length should be ms base */ + haptics->length_ms = effect->replay.length; + level = effect->u.constant.level; + tmp = level * 254; + haptics->level = tmp / 0x7FFF; + break; + + /* RTWM/ETWM modes support this type */ + case FF_PERIODIC: + if (effect->u.periodic.waveform != FF_CUSTOM) { + dev_err(haptics->dev, "Only accept FF_CUSTOM type\n"); + return -EINVAL; + } + + /* + * Load the data and check the length. + * the data will be patterns in this case: 3 < X <= 100, + * and will be saved into the waveform memory inside DA728x. + * If X = 2, the data will be PS_SEQ_ID and PS_SEQ_LOOP . + */ + if (effect->u.periodic.custom_len == DA7280_CUSTOM_DATA_LEN) + goto set_id_loop; + + if (effect->u.periodic.custom_len < DA7280_CUSTOM_DATA_LEN || + effect->u.periodic.custom_len > DA7280_SNP_MEM_SIZE) { + dev_err(haptics->dev, "Invalid data size\n"); + return -EINVAL; + } + + if (copy_from_user(data, effect->u.periodic.custom_data, + sizeof(s16) * + effect->u.periodic.custom_len)) { + dev_err(haptics->dev, + "custom data load error\n"); + return -EFAULT; + } + + memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE); + + for (i = 0; i < effect->u.periodic.custom_len; i++) { + if (data[i] <= 0xff) { + haptics->snp_mem[i] = (u8)data[i]; + } else { + dev_err(haptics->dev, + "Invalid data in the custom data\n"); + return -EINVAL; + } + } + + error = da7280_haptic_mem_update(haptics); + if (error) { + dev_err(haptics->dev, + "mem update error: %d\n", + error); + return error; + } + break; + +set_id_loop: + if (copy_from_user(data, effect->u.periodic.custom_data, + sizeof(s16) * DA7280_CUSTOM_DATA_LEN)) { + dev_err(haptics->dev, + "custom id/loop load error\n"); + return -EFAULT; + } + + haptics->ps_seq_id = + data[DA7280_CUSTOM_DATA_SEQ_ID_IDX] <= + DA7280_SEQ_ID_MAX ? + data[DA7280_CUSTOM_DATA_SEQ_ID_IDX] : 0; + + haptics->ps_seq_loop = + data[DA7280_CUSTOM_DATA_SEQ_LOOP_IDX] <= + DA7280_SEQ_LOOP_MAX ? + data[DA7280_CUSTOM_DATA_SEQ_LOOP_IDX] : 0; + + haptics->op_mode = haptics->periodic_op_mode; + + val = haptics->ps_seq_id << DA7280_PS_SEQ_ID_SHIFT | + haptics->ps_seq_loop << DA7280_PS_SEQ_LOOP_SHIFT; + error = regmap_write(haptics->regmap, + DA7280_SEQ_CTL2, val); + if (error) { + dev_err(haptics->dev, + "i2c err for driving level set : %d\n", + error); + return error; + } + break; + + default: + dev_err(haptics->dev, "Unsupported effect type: %d\n", + effect->type); + return -EINVAL; + } + + return 0; +} + +static int da7280_haptics_playback(struct input_dev *dev, + int effect_id, int val) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + + if (!haptics->op_mode) { + dev_warn(haptics->dev, + "Any effects are not uploaded yet\n"); + return -EPERM; + } + + haptics->val = val; + schedule_work(&haptics->work_playback); + + return 0; +} + +static void da7280_haptics_set_gain(struct input_dev *dev, u16 gain) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + + haptics->gain = gain; + schedule_work(&haptics->work_setgain); +} + +static int da7280_haptic_open(struct input_dev *dev) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + int error; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + dev_err(haptics->dev, + "Failed to open haptic, i2c error : %d\n", error); + + return error; +} + +static void da7280_haptic_close(struct input_dev *dev) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + int error; + + cancel_delayed_work_sync(&haptics->work_duration); + cancel_work_sync(&haptics->work_playback); + cancel_work_sync(&haptics->work_setgain); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) + goto error_i2c; + + if (haptics->op_mode == DA7280_DRO_MODE) { + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, 0); + + if (error) + goto error_i2c; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, 0); + if (error) + goto error_i2c; + + return; + +error_i2c: + dev_err(haptics->dev, "DA7280-haptic i2c error : %d\n", error); +} + +static u8 da7280_haptic_of_mode_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "LRA")) + return DA7280_LRA; + else if (!strcmp(str, "ERM-bar")) + return DA7280_ERM_BAR; + else if (!strcmp(str, "ERM-coin")) + return DA7280_ERM_COIN; + + dev_warn(dev, "Invalid string - set to default\n"); + return DA7280_LRA; +} + +static u8 da7280_haptic_of_gpi_mode_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "Single-pattern")) + return 0; + else if (!strcmp(str, "Multi-pattern")) + return 1; + + dev_warn(dev, "Invalid string - set to default\n"); + return 0; +} + +static u8 da7280_haptic_of_gpi_pol_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "Rising-edge")) + return 0; + else if (!strcmp(str, "Falling-edge")) + return 1; + else if (!strcmp(str, "Both-edge")) + return 2; + + dev_warn(dev, "Invalid string - set to default\n"); + return 0; +} + +static u8 da7280_haptic_of_volt_rating_set(u32 val) +{ + u32 voltage; + + voltage = val / DA7280_VOLTAGE_RATE_STEP + 1; + + if (voltage > 0xFF) + return 0xFF; + return (u8)voltage; +} + +static void da7280_parse_properties(struct device *dev, + struct da7280_haptic *haptics) +{ + char gpi_str1[] = "dlg,gpi0-seq-id"; + char gpi_str2[] = "dlg,gpi0-mode"; + char gpi_str3[] = "dlg,gpi0-polarity"; + unsigned int i, mem[DA7280_SNP_MEM_SIZE]; + const char *str; + u32 val; + + if (!device_property_read_string(dev, "dlg,actuator-type", &str)) + haptics->dev_type = + da7280_haptic_of_mode_str(dev, str); + else /* if no property, then use the mode inside chip */ + haptics->dev_type = DA7280_DEV_MAX; + + if (device_property_read_u32(dev, "dlg,const-op-mode", &val) >= 0) + if (val == DA7280_FF_PERIODIC_PWM) + haptics->const_op_mode = DA7280_PWM_MODE; + else + haptics->const_op_mode = DA7280_DRO_MODE; + else + haptics->const_op_mode = DA7280_DRO_MODE; + + if (device_property_read_u32(dev, "dlg,periodic-op-mode", &val) >= 0) + if (val == DA7280_FF_PERIODIC_ETWM) + haptics->periodic_op_mode = DA7280_ETWM_MODE; + else + haptics->periodic_op_mode = DA7280_RTWM_MODE; + else + haptics->periodic_op_mode = DA7280_RTWM_MODE; + + if (device_property_read_u32(dev, "dlg,nom-microvolt", &val) >= 0) + if (val < DA7280_VOLTAGE_RATE_MAX) + haptics->nommax = + da7280_haptic_of_volt_rating_set(val); + else + haptics->nommax = DA7280_SKIP_INIT; + else /* if no property, then use the value inside chip */ + haptics->nommax = DA7280_SKIP_INIT; + + if (device_property_read_u32(dev, "dlg,abs-max-microvolt", + &val) >= 0) + if (val < DA7280_VOLTAGE_RATE_MAX) + haptics->absmax = + da7280_haptic_of_volt_rating_set(val); + else + haptics->absmax = DA7280_SKIP_INIT; + else + haptics->absmax = DA7280_SKIP_INIT; + + if (device_property_read_u32(dev, "dlg,imax-microamp", &val) >= 0) + if (val < DA7280_IMAX_LIMIT) + haptics->imax = (val - 28600) + / DA7280_IMAX_STEP + 1; + else + haptics->imax = DA7280_IMAX_DEFAULT; + else + haptics->imax = DA7280_IMAX_DEFAULT; + + if (device_property_read_u32(dev, "dlg,impd-micro-ohms", &val) >= 0) + if (val <= DA7280_IMPD_MAX) + haptics->impd = val; + else + haptics->impd = DA7280_IMPD_DEFAULT; + else + haptics->impd = DA7280_IMPD_DEFAULT; + + if (device_property_read_u32(dev, "dlg,resonant-freq-hz", + &val) >= 0) { + if (val < DA7280_MAX_RESONAT_FREQ_HZ && + val > DA7280_MIN_RESONAT_FREQ_HZ) { + haptics->resonant_freq_h = + ((1000000000 / (val * 1333)) >> 7) & 0xFF; + haptics->resonant_freq_l = + (1000000000 / (val * 1333)) & 0x7F; + } else { + haptics->resonant_freq_h = + DA7280_RESONT_FREQH_DFT; + haptics->resonant_freq_l = + DA7280_RESONT_FREQL_DFT; + } + } else { + haptics->resonant_freq_h = DA7280_SKIP_INIT; + haptics->resonant_freq_l = DA7280_SKIP_INIT; + } + + if (device_property_read_u32(dev, "dlg,ps-seq-id", &val) >= 0) + if (val <= DA7280_SEQ_ID_MAX) + haptics->ps_seq_id = val; + else + haptics->ps_seq_id = 0; + else /* if no property, set to zero as a default do nothing */ + haptics->ps_seq_id = 0; + + if (device_property_read_u32(dev, "dlg,ps-seq-loop", &val) >= 0) + if (val <= DA7280_SEQ_LOOP_MAX) + haptics->ps_seq_loop = val; + else + haptics->ps_seq_loop = 0; + else /* if no property, then do nothing */ + haptics->ps_seq_loop = 0; + + /* GPI0~2 Control */ + for (i = 0; i < 3; i++) { + gpi_str1[7] = '0' + i; + if (device_property_read_u32 (dev, gpi_str1, &val) >= 0) + if (val <= DA7280_SEQ_ID_MAX) + haptics->gpi_ctl[i].seq_id = val; + else + haptics->gpi_ctl[i].seq_id = + DA7280_GPI1_SEQ_ID_DEFT + i; + else /* if no property, then do nothing */ + haptics->gpi_ctl[i].seq_id = + DA7280_GPI1_SEQ_ID_DEFT + i; + + gpi_str2[7] = '0' + i; + if (!device_property_read_string(dev, gpi_str2, &str)) + haptics->gpi_ctl[i].mode = + da7280_haptic_of_gpi_mode_str(dev, str); + else + haptics->gpi_ctl[i].mode = 0; + + gpi_str3[7] = '0' + i; + if (!device_property_read_string(dev, gpi_str3, &str)) + haptics->gpi_ctl[i].polarity = + da7280_haptic_of_gpi_pol_str(dev, str); + else + haptics->gpi_ctl[i].polarity = 0; + } + + haptics->bemf_sense_en = + device_property_read_bool(dev, "dlg,bemf-sens-enable"); + haptics->freq_track_en = + device_property_read_bool(dev, "dlg,freq-track-enable"); + haptics->acc_en = + device_property_read_bool(dev, "dlg,acc-enable"); + haptics->rapid_stop_en = + device_property_read_bool(dev, "dlg,rapid-stop-enable"); + haptics->amp_pid_en = + device_property_read_bool(dev, "dlg,amp-pid-enable"); + + if (device_property_read_u32_array(dev, "dlg,mem-array", + &mem[0], + DA7280_SNP_MEM_SIZE) >= 0) { + haptics->mem_update = true; + memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE); + for (i = 0; i < DA7280_SNP_MEM_SIZE; i++) { + if (mem[i] <= 0xff) { + haptics->snp_mem[i] = (u8)mem[i]; + } else { + dev_err(haptics->dev, + "Invalid data in mem-array\n"); + haptics->mem_update = false; + break; + } + } + } else { + haptics->mem_update = false; + } +} + +static irqreturn_t da7280_irq_handler(int irq, void *data) +{ + struct da7280_haptic *haptics = data; + struct device *dev = haptics->dev; + u8 events[IRQ_NUM]; + int error; + + /* Check what events have happened */ + error = regmap_bulk_read(haptics->regmap, + DA7280_IRQ_EVENT1, + events, IRQ_NUM); + if (error) + goto error_i2c; + + /* Clear events */ + error = regmap_write(haptics->regmap, + DA7280_IRQ_EVENT1, events[0]); + if (error) + goto error_i2c; + + if (events[0] & DA7280_E_SEQ_FAULT_MASK) { + /* Stop first if Haptic is working + * Otherwise, the fault may happen continually + * even though the bit is cleared. + */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) + goto error_i2c; + } + + if (events[0] & DA7280_E_SEQ_DONE_MASK) + haptics->enabled = false; + + if (events[0] & DA7280_E_WARNING_MASK) { + if (events[1] & DA7280_E_LIM_DRIVE_MASK || + events[1] & DA7280_E_LIM_DRIVE_ACC_MASK) + dev_warn(dev, "Please reduce the driver level\n"); + if (events[1] & DA7280_E_LIM_DRIVE_ACC_MASK) + dev_warn(dev, "Please Check the mem data format\n"); + } + + if (events[0] & DA7280_E_SEQ_FAULT_MASK) { + if (events[2] & DA7280_E_SEQ_ID_FAULT_MASK) + dev_info(dev, "Please reload PS_SEQ_ID & mem data\n"); + if (events[2] & DA7280_E_MEM_FAULT_MASK) + dev_info(dev, "Please reload the mem data\n"); + if (events[2] & DA7280_E_PWM_FAULT_MASK) + dev_info(dev, "Please restart PWM interface\n"); + } + + return IRQ_HANDLED; + +error_i2c: + dev_err(dev, "da7280 i2c error : %d\n", error); + return IRQ_NONE; +} + +static int da7280_init(struct da7280_haptic *haptics) +{ + int error, i; + unsigned int val = 0; + u32 v2i_factor; + u8 mask = 0; + + /* If device type is DA7280_DEV_MAX, + * then just use default value inside chip. + */ + if (haptics->dev_type == DA7280_DEV_MAX) { + error = regmap_read(haptics->regmap, DA7280_TOP_CFG1, &val); + if (error) + goto error_i2c; + if (val & DA7280_ACTUATOR_TYPE_MASK) + haptics->dev_type = DA7280_ERM_COIN; + else + haptics->dev_type = DA7280_LRA; + } + + /* Apply user settings */ + if (haptics->dev_type == DA7280_LRA) { + if (haptics->resonant_freq_l != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, + DA7280_FRQ_LRA_PER_H, + haptics->resonant_freq_h); + if (error) + goto error_i2c; + error = regmap_write(haptics->regmap, + DA7280_FRQ_LRA_PER_L, + haptics->resonant_freq_l); + if (error) + goto error_i2c; + } + } else if (haptics->dev_type == DA7280_ERM_COIN) { + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_INT_CFG1, + DA7280_BEMF_FAULT_LIM_MASK, 0); + if (error) + goto error_i2c; + + mask = DA7280_TST_CALIB_IMPEDANCE_DIS_MASK | + DA7280_V2I_FACTOR_FREEZE_MASK; + val = DA7280_TST_CALIB_IMPEDANCE_DIS_MASK | + DA7280_V2I_FACTOR_FREEZE_MASK; + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG4, + mask, val); + if (error) + goto error_i2c; + + haptics->acc_en = false; + haptics->rapid_stop_en = false; + haptics->amp_pid_en = false; + } + + mask = DA7280_ACTUATOR_TYPE_MASK | + DA7280_BEMF_SENSE_EN_MASK | + DA7280_FREQ_TRACK_EN_MASK | + DA7280_ACCELERATION_EN_MASK | + DA7280_RAPID_STOP_EN_MASK | + DA7280_AMP_PID_EN_MASK; + + val = (haptics->dev_type ? 1 : 0) + << DA7280_ACTUATOR_TYPE_SHIFT | + (haptics->bemf_sense_en ? 1 : 0) + << DA7280_BEMF_SENSE_EN_SHIFT | + (haptics->freq_track_en ? 1 : 0) + << DA7280_FREQ_TRACK_EN_SHIFT | + (haptics->acc_en ? 1 : 0) + << DA7280_ACCELERATION_EN_SHIFT | + (haptics->rapid_stop_en ? 1 : 0) + << DA7280_RAPID_STOP_EN_SHIFT | + (haptics->amp_pid_en ? 1 : 0) + << DA7280_AMP_PID_EN_SHIFT; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG1, mask, val); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG5, + DA7280_V2I_FACTOR_OFFSET_EN_MASK, + haptics->acc_en ? + DA7280_V2I_FACTOR_OFFSET_EN_MASK : 0); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG2, + DA7280_MEM_DATA_SIGNED_MASK, + haptics->acc_en ? + 0 : DA7280_MEM_DATA_SIGNED_MASK); + if (error) + goto error_i2c; + + if (haptics->nommax != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, + DA7280_ACTUATOR1, + haptics->nommax); + if (error) + goto error_i2c; + } + + if (haptics->absmax != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, DA7280_ACTUATOR2, + haptics->absmax); + if (error) + goto error_i2c; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_ACTUATOR3, + DA7280_IMAX_MASK, + haptics->imax); + if (error) + goto error_i2c; + + v2i_factor = + haptics->impd * (haptics->imax + 4) / 1610400; + error = regmap_write(haptics->regmap, + DA7280_CALIB_V2I_L, + v2i_factor & 0xff); + if (error) + goto error_i2c; + error = regmap_write(haptics->regmap, + DA7280_CALIB_V2I_H, + v2i_factor >> 8); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + goto error_i2c; + + if (haptics->mem_update) { + error = da7280_haptic_mem_update(haptics); + if (error) + goto error_i2c; + } + + /* Set PS_SEQ_ID and PS_SEQ_LOOP */ + val = haptics->ps_seq_id << DA7280_PS_SEQ_ID_SHIFT | + haptics->ps_seq_loop << DA7280_PS_SEQ_LOOP_SHIFT; + error = regmap_write(haptics->regmap, + DA7280_SEQ_CTL2, val); + if (error) + goto error_i2c; + + /* GPI(N) CTL */ + for (i = 0; i < 3; i++) { + val = haptics->gpi_ctl[i].seq_id + << DA7280_GPI0_SEQUENCE_ID_SHIFT | + haptics->gpi_ctl[i].mode + << DA7280_GPI0_MODE_SHIFT | + haptics->gpi_ctl[i].polarity + << DA7280_GPI0_POLARITY_SHIFT; + error = regmap_write(haptics->regmap, + DA7280_GPI_0_CTL + i, val); + if (error) + goto error_i2c; + } + + /* Mask ADC_SAT_M bit as default */ + error = regmap_update_bits(haptics->regmap, + DA7280_IRQ_MASK2, + DA7280_ADC_SAT_M_MASK, + DA7280_ADC_SAT_M_MASK); + if (error) + goto error_i2c; + + /* Clear Interrupts */ + error = regmap_write(haptics->regmap, DA7280_IRQ_EVENT1, 0xff); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_IRQ_MASK1, + DA7280_SEQ_FAULT_M_MASK + | DA7280_SEQ_DONE_M_MASK, 0); + if (error) + goto error_i2c; + + haptics->enabled = false; + return 0; + +error_i2c: + dev_err(haptics->dev, "haptic init - I2C error : %d\n", error); + return error; +} + +/* Valid format for ps_seq_id + * echo X > ps_seq_id + * ex) echo 2 > /sys/class/..../ps_seq_id + * 0 <= X <= 15. + */ +static ssize_t ps_seq_id_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_SEQ_CTL2, + DA7280_PS_SEQ_ID_MASK, + (val & 0xf) >> DA7280_PS_SEQ_ID_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->ps_seq_id = val & 0xf; + + return count; + +err: + dev_err(dev, "Invalid input\n"); + return count; +} + +static ssize_t ps_seq_id_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_SEQ_CTL2, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_PS_SEQ_ID_MASK) + >> DA7280_PS_SEQ_ID_SHIFT; + + return sprintf(buf, "ps_seq_id is %d\n", val); +} + +/* Valid format for ps_seq_loop + * echo X > ps_seq_loop + * ex) echo 2 > /sys/class/..../ps_seq_loop + * 0 <= X <= 15. + */ +static ssize_t ps_seq_loop_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_SEQ_CTL2, + DA7280_PS_SEQ_LOOP_MASK, + (val & 0xF) << DA7280_PS_SEQ_LOOP_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->ps_seq_loop = (val & 0xF); + + return count; +err: + dev_err(dev, "Invalid input value!\n"); + return count; +} + +static ssize_t ps_seq_loop_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_SEQ_CTL2, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_PS_SEQ_LOOP_MASK) + >> DA7280_PS_SEQ_LOOP_SHIFT; + + return sprintf(buf, "ps_seq_loop is %d\n", val); +} + +/* Valid format for GPIx_SEQUENCE_ID + * echo X > ./gpi_seq_id0 + * Range of X: 0 <= X <= 15 + * ex) + * echo 1 > /sys/class/..../gpi_seq_id0 + * echo 2 > /sys/class/..../gpi_seq_id1 + * echo 3 > /sys/class/..../gpi_seq_id2 + */ +static ssize_t gpi_seq_id0_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_GPI_0_CTL, + DA7280_GPI0_SEQUENCE_ID_MASK, + (val & 0xf) + << DA7280_GPI0_SEQUENCE_ID_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->gpi_ctl[0].seq_id = val & 0xf; + + return count; + +err: + dev_err(dev, "Invalid input\n"); + return count; +} + +static ssize_t gpi_seq_id0_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_GPI_0_CTL, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_GPI0_SEQUENCE_ID_MASK) + >> DA7280_GPI0_SEQUENCE_ID_SHIFT; + + return sprintf(buf, "gpi_seq_id0 is %d\n", val); +} + +static ssize_t gpi_seq_id1_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_GPI_1_CTL, + DA7280_GPI1_SEQUENCE_ID_MASK, + (val & 0xf) + << DA7280_GPI1_SEQUENCE_ID_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->gpi_ctl[1].seq_id = val & 0xf; + + return count; + +err: + dev_err(dev, "Invalid input\n"); + return count; +} + +static ssize_t gpi_seq_id1_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_GPI_1_CTL, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_GPI1_SEQUENCE_ID_MASK) + >> DA7280_GPI1_SEQUENCE_ID_SHIFT; + + return sprintf(buf, "gpi_seq_id1 is %d\n", val); +} + +static ssize_t gpi_seq_id2_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + long val = 0xff; + int error; + + if (haptics->enabled) + return -EBUSY; + + if (kstrtol(&buf[0], 0, &val) < 0) + goto err; + + error = regmap_update_bits(haptics->regmap, + DA7280_GPI_2_CTL, + DA7280_GPI2_SEQUENCE_ID_MASK, + (val & 0xf) + << DA7280_GPI2_SEQUENCE_ID_SHIFT); + if (error) { + dev_err(haptics->dev, + "failed to update register : %d\n", error); + return error; + } + + haptics->gpi_ctl[2].seq_id = val & 0xf; + + return count; + +err: + dev_err(dev, "Invalid input\n"); + return count; +} + +static ssize_t gpi_seq_id2_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error; + unsigned int val; + + error = regmap_read(haptics->regmap, DA7280_GPI_2_CTL, &val); + if (error) { + dev_err(haptics->dev, + "failed to read register : %d\n", error); + return error; + } + val = (val & DA7280_GPI2_SEQUENCE_ID_MASK) + >> DA7280_GPI2_SEQUENCE_ID_SHIFT; + + return sprintf(buf, "gpi_seq_id2 is %d\n", val); +} + +#define MAX_PTN_REGS DA7280_SNP_MEM_SIZE +#define MAX_USER_INPUT_LEN (5 * DA7280_SNP_MEM_SIZE) +struct parse_data_t { + int len; + u8 val[MAX_PTN_REGS]; +}; + +static int da7280_parse_args(struct device *dev, + char *cmd, struct parse_data_t *ptn) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + char *tok; /* used to separate tokens */ + static const char ct[] = " \t"; /* space or tab delimits the tokens */ + int tok_count = 0; /* total number of tokens parsed */ + int i = 0, val; + + ptn->len = 0; + + /* parse the input string */ + while ((tok = strsep(&cmd, ct)) != NULL) { + /* this is a value to be written to the register */ + if (kstrtouint(tok, 0, &val) < 0) { + dev_err(haptics->dev, + "failed to read from %s\n", tok); + break; + } + + if (i < MAX_PTN_REGS) { + ptn->val[i] = val; + i++; + } + tok_count++; + } + + /* decide whether it is a read or write operation based on the + * value of tok_count and count_flag. + * tok_count = 0: no inputs, invalid case. + * tok_count = 1: write one value. + * tok_count > 1: write multiple values/patterns. + */ + switch (tok_count) { + case 0: + return -EINVAL; + case 1: + ptn->len = 1; + break; + default: + ptn->len = i; + } + return 0; +} + +static ssize_t +patterns_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + struct parse_data_t mem; + char cmd[MAX_USER_INPUT_LEN]; + unsigned int val; + int error; + + error = regmap_read(haptics->regmap, DA7280_MEM_CTL1, &val); + if (error) + return error; + + if (count > MAX_USER_INPUT_LEN) + memcpy(cmd, buf, MAX_USER_INPUT_LEN); + else + memcpy(cmd, buf, count); + + /* chop of '\n' introduced by echo at the end of the input */ + if (cmd[count - 1] == '\n') + cmd[count - 1] = '\0'; + + if (da7280_parse_args(dev, cmd, &mem) < 0) + return -EINVAL; + + memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE); + memcpy(haptics->snp_mem, mem.val, mem.len); + + error = da7280_haptic_mem_update(haptics); + if (error) + return error; + + return count; +} + +static DEVICE_ATTR_RW(ps_seq_id); +static DEVICE_ATTR_RW(ps_seq_loop); +static DEVICE_ATTR_RW(gpi_seq_id0); +static DEVICE_ATTR_RW(gpi_seq_id1); +static DEVICE_ATTR_RW(gpi_seq_id2); +static DEVICE_ATTR_WO(patterns); +static struct attribute *da7280_sysfs_attr[] = { + &dev_attr_ps_seq_id.attr, + &dev_attr_ps_seq_loop.attr, + &dev_attr_gpi_seq_id0.attr, + &dev_attr_gpi_seq_id1.attr, + &dev_attr_gpi_seq_id2.attr, + &dev_attr_patterns.attr, + NULL, +}; + +static const struct attribute_group da7280_attr_group = { + .attrs = da7280_sysfs_attr, +}; + +static int da7280_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct da7280_haptic *haptics; + struct input_dev *input_dev; + struct ff_device *ff; + unsigned int period2freq; + int error; + + haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL); + if (!haptics) + return -ENOMEM; + haptics->dev = dev; + + if (!client->irq) { + dev_err(dev, "No IRQ configured\n"); + return -EINVAL; + } + + da7280_parse_properties(&client->dev, haptics); + + if (haptics->const_op_mode == DA7280_PWM_MODE) { + /* Get pwm and regulatot for haptics device */ + haptics->pwm_dev = devm_pwm_get(&client->dev, NULL); + if (IS_ERR(haptics->pwm_dev)) { + dev_err(dev, "failed to get PWM device\n"); + return PTR_ERR(haptics->pwm_dev); + } + + /* + * FIXME: pwm_apply_args() should be removed when switching to + * the atomic PWM API. + */ + pwm_apply_args(haptics->pwm_dev); + + /* Check PWM Period, it must be in 10k ~ 250kHz */ + period2freq = 1000000 / pwm_get_period(haptics->pwm_dev); + if (period2freq < DA7280_MIN_PWM_FREQ_KHZ || + period2freq > DA7280_MAX_PWM_FREQ_KHZ) { + dev_err(dev, "Not supported PWM frequency(%d)\n", + period2freq); + return -EINVAL; + } + } + + INIT_DELAYED_WORK(&haptics->work_duration, da7280_haptic_work_duration); + INIT_WORK(&haptics->work_playback, da7280_haptic_work_playback); + INIT_WORK(&haptics->work_setgain, da7280_haptic_work_setgain); + + haptics->client = client; + i2c_set_clientdata(client, haptics); + + haptics->regmap = + devm_regmap_init_i2c(client, &da7280_haptic_regmap_config); + if (IS_ERR(haptics->regmap)) { + error = PTR_ERR(haptics->regmap); + dev_err(dev, "Failed to allocate register map : %d\n", + error); + return error; + } + + error = da7280_init(haptics); + if (error) { + dev_err(dev, "failed to initialize device\n"); + return error; + } + + /* Initialize input device for haptic device */ + input_dev = devm_input_allocate_device(dev); + if (!input_dev) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + input_dev->name = "da7280-haptic"; + input_dev->dev.parent = client->dev.parent; + input_dev->open = da7280_haptic_open; + input_dev->close = da7280_haptic_close; + input_set_drvdata(input_dev, haptics); + haptics->input_dev = input_dev; + + input_set_capability(haptics->input_dev, EV_FF, FF_PERIODIC); + input_set_capability(haptics->input_dev, EV_FF, FF_CUSTOM); + input_set_capability(haptics->input_dev, EV_FF, FF_CONSTANT); + input_set_capability(haptics->input_dev, EV_FF, FF_GAIN); + + error = input_ff_create(haptics->input_dev, DA7280_FF_EFFECT_COUNT_MAX); + if (error) { + dev_err(dev, "create FF input device failed(%d)\n", + error); + return error; + } + + ff = input_dev->ff; + ff->upload = da7280_haptics_upload_effect; + ff->playback = da7280_haptics_playback; + ff->set_gain = da7280_haptics_set_gain; + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "failed to register input device\n"); + return error; + } + + error = devm_device_add_group(dev, &da7280_attr_group); + if (error) { + dev_err(dev, "Failed to create sysfs attributes: %d\n", + error); + return error; + } + + error = devm_request_threaded_irq(dev, client->irq, NULL, + da7280_irq_handler, + IRQF_ONESHOT, + "da7280-haptics", haptics); + if (error) + dev_err(dev, "Failed to request IRQ : %d\n", client->irq); + + return error; +} + +static int __maybe_unused da7280_suspend(struct device *dev) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error = 0; + + mutex_lock(&haptics->input_dev->mutex); + + da7280_haptic_disable(haptics); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, 0); + if (error) + dev_err(haptics->dev, + "I2C error : %d\n", error); + + mutex_unlock(&haptics->input_dev->mutex); + return error; +} + +static int __maybe_unused da7280_resume(struct device *dev) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error = 0; + + mutex_lock(&haptics->input_dev->mutex); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + dev_err(haptics->dev, + "i2c error : %d\n", error); + + mutex_unlock(&haptics->input_dev->mutex); + return error; +} + +static const struct of_device_id da7280_of_match[] = { + { .compatible = "dlg,da7280", }, + { } +}; +MODULE_DEVICE_TABLE(of, da7280_of_match); + +static const struct i2c_device_id da7280_i2c_id[] = { + { "da7280", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, da7280_i2c_id); + +static SIMPLE_DEV_PM_OPS(da7280_pm_ops, + da7280_suspend, da7280_resume); + +static struct i2c_driver da7280_driver = { + .driver = { + .name = "da7280", + .of_match_table = of_match_ptr(da7280_of_match), + .pm = &da7280_pm_ops, + }, + .probe = da7280_probe, + .id_table = da7280_i2c_id, +}; +module_i2c_driver(da7280_driver); + +MODULE_DESCRIPTION("DA7280 haptics driver"); +MODULE_AUTHOR("Roy Im <Roy.Im.Opensource@diasemi.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/da7280.h b/drivers/input/misc/da7280.h new file mode 100644 index 0000000..b234e62 --- /dev/null +++ b/drivers/input/misc/da7280.h @@ -0,0 +1,412 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * DA7280 Haptic device driver registers + * + * Copyright (c) 2019 Dialog Semiconductor. + * Author: Roy Im <Roy.Im.Opensource@diasemi.com> + */ + +#ifndef _DA7280_REG_DEFS_H +#define _DA7280_REG_DEFS_H + +#include <linux/bitops.h> + +/* Registers */ + +#define DA7280_CHIP_REV 0x00 +#define DA7280_IRQ_EVENT1 0x03 +#define DA7280_IRQ_EVENT_WARNING_DIAG 0x04 +#define DA7280_IRQ_EVENT_SEQ_DIAG 0x05 +#define DA7280_IRQ_STATUS1 0x06 +#define DA7280_IRQ_MASK1 0x07 +#define DA7280_CIF_I2C1 0x08 +#define DA7280_FRQ_LRA_PER_H 0x0A +#define DA7280_FRQ_LRA_PER_L 0x0B +#define DA7280_ACTUATOR1 0x0C +#define DA7280_ACTUATOR2 0x0D +#define DA7280_ACTUATOR3 0x0E +#define DA7280_CALIB_V2I_H 0x0F +#define DA7280_CALIB_V2I_L 0x10 +#define DA7280_CALIB_IMP_H 0x11 +#define DA7280_CALIB_IMP_L 0x12 +#define DA7280_TOP_CFG1 0x13 +#define DA7280_TOP_CFG2 0x14 +#define DA7280_TOP_CFG3 0x15 +#define DA7280_TOP_CFG4 0x16 +#define DA7280_TOP_INT_CFG1 0x17 +#define DA7280_TOP_INT_CFG6_H 0x1C +#define DA7280_TOP_INT_CFG6_L 0x1D +#define DA7280_TOP_INT_CFG7_H 0x1E +#define DA7280_TOP_INT_CFG7_L 0x1F +#define DA7280_TOP_INT_CFG8 0x20 +#define DA7280_TOP_CTL1 0x22 +#define DA7280_TOP_CTL2 0x23 +#define DA7280_SEQ_CTL1 0x24 +#define DA7280_SWG_C1 0x25 +#define DA7280_SWG_C2 0x26 +#define DA7280_SWG_C3 0x27 +#define DA7280_SEQ_CTL2 0x28 +#define DA7280_GPI_0_CTL 0x29 +#define DA7280_GPI_1_CTL 0x2A +#define DA7280_GPI_2_CTL 0x2B +#define DA7280_MEM_CTL1 0x2C +#define DA7280_MEM_CTL2 0x2D +#define DA7280_ADC_DATA_H1 0x2E +#define DA7280_ADC_DATA_L1 0x2F +#define DA7280_POLARITY 0x43 +#define DA7280_LRA_AVR_H 0x44 +#define DA7280_LRA_AVR_L 0x45 +#define DA7280_FRQ_LRA_PER_ACT_H 0x46 +#define DA7280_FRQ_LRA_PER_ACT_L 0x47 +#define DA7280_FRQ_PHASE_H 0x48 +#define DA7280_FRQ_PHASE_L 0x49 +#define DA7280_FRQ_CTL 0x4C +#define DA7280_TRIM3 0x5F +#define DA7280_TRIM4 0x60 +#define DA7280_TRIM6 0x62 +#define DA7280_TOP_CFG5 0x6E +#define DA7280_IRQ_EVENT_ACTUATOR_FAULT 0x81 +#define DA7280_IRQ_STATUS2 0x82 +#define DA7280_IRQ_MASK2 0x83 +#define DA7280_SNP_MEM_0 0x84 +#define DA7280_SNP_MEM_99 0xE7 + +/* DA7280_CHIP_REV (Address 0x00) */ +#define DA7280_CHIP_REV_MAJOR_SHIFT 0 +#define DA7280_CHIP_REV_MAJOR_MASK (15 << 0) +#define DA7280_CHIP_REV_MINOR_SHIFT 4 +#define DA7280_CHIP_REV_MINOR_MASK (15 << 4) + +/* DA7280_IRQ_EVENT1 (Address 0x03) */ +#define DA7280_E_SEQ_CONTINUE_SHIFT 0 +#define DA7280_E_SEQ_CONTINUE_MASK BIT(0) +#define DA7280_E_UVLO_SHIFT 1 +#define DA7280_E_UVLO_MASK BIT(1) +#define DA7280_E_SEQ_DONE_SHIFT 2 +#define DA7280_E_SEQ_DONE_MASK BIT(2) +#define DA7280_E_OVERTEMP_CRIT_SHIFT 3 +#define DA7280_E_OVERTEMP_CRIT_MASK BIT(3) +#define DA7280_E_SEQ_FAULT_SHIFT 4 +#define DA7280_E_SEQ_FAULT_MASK BIT(4) +#define DA7280_E_WARNING_SHIFT 5 +#define DA7280_E_WARNING_MASK BIT(5) +#define DA7280_E_ACTUATOR_FAULT_SHIFT 6 +#define DA7280_E_ACTUATOR_FAULT_MASK BIT(6) +#define DA7280_E_OC_FAULT_SHIFT 7 +#define DA7280_E_OC_FAULT_MASK BIT(7) + +/* DA7280_IRQ_EVENT_WARNING_DIAG (Address 0x04) */ +#define DA7280_E_OVERTEMP_WARN_SHIFT 3 +#define DA7280_E_OVERTEMP_WARN_MASK BIT(3) +#define DA7280_E_MEM_TYPE_SHIFT 4 +#define DA7280_E_MEM_TYPE_MASK BIT(4) +#define DA7280_E_LIM_DRIVE_ACC_SHIFT 6 +#define DA7280_E_LIM_DRIVE_ACC_MASK BIT(6) +#define DA7280_E_LIM_DRIVE_SHIFT 7 +#define DA7280_E_LIM_DRIVE_MASK BIT(7) + +/* DA7280_IRQ_EVENT_PAT_DIAG (Address 0x05) */ +#define DA7280_E_PWM_FAULT_SHIFT 5 +#define DA7280_E_PWM_FAULT_MASK BIT(5) +#define DA7280_E_MEM_FAULT_SHIFT 6 +#define DA7280_E_MEM_FAULT_MASK BIT(6) +#define DA7280_E_SEQ_ID_FAULT_SHIFT 7 +#define DA7280_E_SEQ_ID_FAULT_MASK BIT(7) + +/* DA7280_IRQ_STATUS1 (Address 0x06) */ +#define DA7280_STA_SEQ_CONTINUE_SHIFT 0 +#define DA7280_STA_SEQ_CONTINUE_MASK BIT(0) +#define DA7280_STA_UVLO_VBAT_OK_SHIFT 1 +#define DA7280_STA_UVLO_VBAT_OK_MASK BIT(1) +#define DA7280_STA_SEQ_DONE_SHIFT 2 +#define DA7280_STA_SEQ_DONE_MASK BIT(2) +#define DA7280_STA_OVERTEMP_CRIT_SHIFT 3 +#define DA7280_STA_OVERTEMP_CRIT_MASK BIT(3) +#define DA7280_STA_SEQ_FAULT_SHIFT 4 +#define DA7280_STA_SEQ_FAULT_MASK BIT(4) +#define DA7280_STA_WARNING_SHIFT 5 +#define DA7280_STA_WARNING_MASK BIT(5) +#define DA7280_STA_ACTUATOR_SHIFT 6 +#define DA7280_STA_ACTUATOR_MASK BIT(6) +#define DA7280_STA_OC_SHIFT 7 +#define DA7280_STA_OC_MASK BIT(7) + +/* DA7280_IRQ_MASK1 (Address 0x07) */ +#define DA7280_SEQ_CONTINUE_M_SHIFT 0 +#define DA7280_SEQ_CONTINUE_M_MASK BIT(0) +#define DA7280_E_UVLO_M_SHIFT 1 +#define DA7280_E_UVLO_M_MASK BIT(1) +#define DA7280_SEQ_DONE_M_SHIFT 2 +#define DA7280_SEQ_DONE_M_MASK BIT(2) +#define DA7280_OVERTEMP_CRIT_M_SHIFT 3 +#define DA7280_OVERTEMP_CRIT_M_MASK BIT(3) +#define DA7280_SEQ_FAULT_M_SHIFT 4 +#define DA7280_SEQ_FAULT_M_MASK BIT(4) +#define DA7280_WARNING_M_SHIFT 5 +#define DA7280_WARNING_M_MASK BIT(5) +#define DA7280_ACTUATOR_M_SHIFT 6 +#define DA7280_ACTUATOR_M_MASK BIT(6) +#define DA7280_OC_M_SHIFT 7 +#define DA7280_OC_M_MASK BIT(7) + +/* DA7280_CIF_I2C1 (Address 0x08) */ +#define DA7280_I2C_TO_ENABLE_SHIFT 6 +#define DA7280_I2C_TO_ENABLE_MASK BIT(6) +#define DA7280_I2C_WR_MODE_SHIFT 7 +#define DA7280_I2C_WR_MODE_MASK BIT(7) + +/* DA7280_FRQ_LRA_PER_H (Address 0x0a) */ +#define DA7280_LRA_PER_H_SHIFT 0 +#define DA7280_LRA_PER_H_MASK (255 << 0) + +/* DA7280_FRQ_LRA_PER_L (Address 0x0b) */ +#define DA7280_LRA_PER_L_SHIFT 0 +#define DA7280_LRA_PER_L_MASK (127 << 0) + +/* DA7280_ACTUATOR1 (Address 0x0c) */ +#define DA7280_ACTUATOR_NOMMAX_SHIFT 0 +#define DA7280_ACTUATOR_NOMMAX_MASK (255 << 0) + +/* DA7280_ACTUATOR2 (Address 0x0d) */ +#define DA7280_ACTUATOR_ABSMAX_SHIFT 0 +#define DA7280_ACTUATOR_ABSMAX_MASK (255 << 0) + +/* DA7280_ACTUATOR3 (Address 0x0e) */ +#define DA7280_IMAX_SHIFT 0 +#define DA7280_IMAX_MASK (31 << 0) + +/* DA7280_CALIB_V2I_H (Address 0x0f) */ +#define DA7280_V2I_FACTOR_H_SHIFT 0 +#define DA7280_V2I_FACTOR_H_MASK (255 << 0) + +/* DA7280_CALIB_V2I_L (Address 0x10) */ +#define DA7280_V2I_FACTOR_L_SHIFT 0 +#define DA7280_V2I_FACTOR_L_MASK (255 << 0) + +/* DA7280_CALIB_IMP_H (Address 0x11) */ +#define DA7280_IMPEDANCE_H_SHIFT 0 +#define DA7280_IMPEDANCE_H_MASK (255 << 0) + +/* DA7280_CALIB_IMP_L (Address 0x12) */ +#define DA7280_IMPEDANCE_L_SHIFT 0 +#define DA7280_IMPEDANCE_L_MASK (3 << 0) + +/* DA7280_TOP_CFG1 (Address 0x13) */ +#define DA7280_AMP_PID_EN_SHIFT 0 +#define DA7280_AMP_PID_EN_MASK BIT(0) +#define DA7280_RAPID_STOP_EN_SHIFT 1 +#define DA7280_RAPID_STOP_EN_MASK BIT(1) +#define DA7280_ACCELERATION_EN_SHIFT 2 +#define DA7280_ACCELERATION_EN_MASK BIT(2) +#define DA7280_FREQ_TRACK_EN_SHIFT 3 +#define DA7280_FREQ_TRACK_EN_MASK BIT(3) +#define DA7280_BEMF_SENSE_EN_SHIFT 4 +#define DA7280_BEMF_SENSE_EN_MASK BIT(4) +#define DA7280_ACTUATOR_TYPE_SHIFT 5 +#define DA7280_ACTUATOR_TYPE_MASK BIT(5) +#define DA7280_EMBEDDED_MODE_SHIFT 7 +#define DA7280_EMBEDDED_MODE_MASK BIT(7) + +/* DA7280_TOP_CFG2 (Address 0x14) */ +#define DA7280_FULL_BRAKE_THR_SHIFT 0 +#define DA7280_FULL_BRAKE_THR_MASK (15 << 0) +#define DA7280_MEM_DATA_SIGNED_SHIFT 4 +#define DA7280_MEM_DATA_SIGNED_MASK BIT(4) + +/* DA7280_TOP_CFG3 (Address 0x15) */ +#define DA7280_VDD_MARGIN_SHIFT 0 +#define DA7280_VDD_MARGIN_MASK (15 << 0) + +/* DA7280_TOP_CFG4 (Address 0x16) */ +#define DA7280_TST_CALIB_IMPEDANCE_DIS_SHIFT 6 +#define DA7280_TST_CALIB_IMPEDANCE_DIS_MASK BIT(6) +#define DA7280_V2I_FACTOR_FREEZE_SHIFT 7 +#define DA7280_V2I_FACTOR_FREEZE_MASK BIT(7) + +/* DA7280_TOP_INT_CFG1 (Address 0x17) */ +#define DA7280_BEMF_FAULT_LIM_SHIFT 0 +#define DA7280_BEMF_FAULT_LIM_MASK (3 << 0) +#define DA7280_FRQ_LOCKED_LIM_SHIFT 2 +#define DA7280_FRQ_LOCKED_LIM_MASK (63 << 2) + +/* DA7280_TOP_INT_CFG6_H (Address 0x1c) */ +#define DA7280_FRQ_PID_KP_H_SHIFT 0 +#define DA7280_FRQ_PID_KP_H_MASK (255 << 0) + +/* DA7280_TOP_INT_CFG6_L (Address 0x1d) */ +#define DA7280_FRQ_PID_KP_L_SHIFT 0 +#define DA7280_FRQ_PID_KP_L_MASK (255 << 0) + +/* DA7280_TOP_INT_CFG7_H (Address 0x1e) */ +#define DA7280_FRQ_PID_KI_H_SHIFT 0 +#define DA7280_FRQ_PID_KI_H_MASK (255 << 0) + +/* DA7280_TOP_INT_CFG7_L (Address 0x1f) */ +#define DA7280_FRQ_PID_KI_L_SHIFT 0 +#define DA7280_FRQ_PID_KI_L_MASK (255 << 0) + +/* DA7280_TOP_INT_CFG8 (Address 0x20) */ +#define DA7280_TST_FRQ_TRACK_BEMF_LIM_SHIFT 0 +#define DA7280_TST_FRQ_TRACK_BEMF_LIM_MASK (15 << 0) +#define DA7280_TST_AMP_RAPID_STOP_LIM_SHIFT 4 +#define DA7280_TST_AMP_RAPID_STOP_LIM_MASK (7 << 4) + +/* DA7280_TOP_CTL1 (Address 0x22) */ +#define DA7280_OPERATION_MODE_SHIFT 0 +#define DA7280_OPERATION_MODE_MASK (7 << 0) +#define DA7280_STANDBY_EN_SHIFT 3 +#define DA7280_STANDBY_EN_MASK BIT(3) +#define DA7280_SEQ_START_SHIFT 4 +#define DA7280_SEQ_START_MASK BIT(4) + +/* DA7280_TOP_CTL2 (Address 0x23) */ +#define DA7280_OVERRIDE_VAL_SHIFT 0 +#define DA7280_OVERRIDE_VAL_MASK (255 << 0) + +/* DA7280_SEQ_CTL1 (Address 0x24) */ +#define DA7280_SEQ_CONTINUE_SHIFT 0 +#define DA7280_SEQ_CONTINUE_MASK BIT(0) +#define DA7280_WAVEGEN_MODE_SHIFT 1 +#define DA7280_WAVEGEN_MODE_MASK BIT(1) +#define DA7280_FREQ_WAVEFORM_TIMEBASE_SHIFT 2 +#define DA7280_FREQ_WAVEFORM_TIMEBASE_MASK BIT(2) + +/* DA7280_SWG_C1 (Address 0x25) */ +#define DA7280_CUSTOM_WAVE_GEN_COEFF1_SHIFT 0 +#define DA7280_CUSTOM_WAVE_GEN_COEFF1_MASK (255 << 0) + +/* DA7280_SWG_C2 (Address 0x26) */ +#define DA7280_CUSTOM_WAVE_GEN_COEFF2_SHIFT 0 +#define DA7280_CUSTOM_WAVE_GEN_COEFF2_MASK (255 << 0) + +/* DA7280_SWG_C3 (Address 0x27) */ +#define DA7280_CUSTOM_WAVE_GEN_COEFF3_SHIFT 0 +#define DA7280_CUSTOM_WAVE_GEN_COEFF3_MASK (255 << 0) + +/* DA7280_SEQ_CTL2 (Address 0x28) */ +#define DA7280_PS_SEQ_ID_SHIFT 0 +#define DA7280_PS_SEQ_ID_MASK (15 << 0) +#define DA7280_PS_SEQ_LOOP_SHIFT 4 +#define DA7280_PS_SEQ_LOOP_MASK (15 << 4) + +/* DA7280_GPIO_0_CTL (Address 0x29) */ +#define DA7280_GPI0_POLARITY_SHIFT 0 +#define DA7280_GPI0_POLARITY_MASK (3 << 0) +#define DA7280_GPI0_MODE_SHIFT 2 +#define DA7280_GPI0_MODE_MASK BIT(2) +#define DA7280_GPI0_SEQUENCE_ID_SHIFT 3 +#define DA7280_GPI0_SEQUENCE_ID_MASK (15 << 3) + +/* DA7280_GPIO_1_CTL (Address 0x2a) */ +#define DA7280_GPI1_POLARITY_SHIFT 0 +#define DA7280_GPI1_POLARITY_MASK (3 << 0) +#define DA7280_GPI1_MODE_SHIFT 2 +#define DA7280_GPI1_MODE_MASK BIT(2) +#define DA7280_GPI1_SEQUENCE_ID_SHIFT 3 +#define DA7280_GPI1_SEQUENCE_ID_MASK (15 << 3) + +/* DA7280_GPIO_2_CTL (Address 0x2b) */ +#define DA7280_GPI2_POLARITY_SHIFT 0 +#define DA7280_GPI2_POLARITY_MASK (3 << 0) +#define DA7280_GPI2_MODE_SHIFT 2 +#define DA7280_GPI2_MODE_MASK BIT(2) +#define DA7280_GPI2_SEQUENCE_ID_SHIFT 3 +#define DA7280_GPI2_SEQUENCE_ID_MASK (15 << 3) + +/* DA7280_MEM_CTL1 (Address 0x2c) */ +#define DA7280_WAV_MEM_BASE_ADDR_SHIFT 0 +#define DA7280_WAV_MEM_BASE_ADDR_MASK (255 << 0) + +/* DA7280_MEM_CTL2 (Address 0x2d) */ +#define DA7280_WAV_MEM_LOCK_SHIFT 7 +#define DA7280_WAV_MEM_LOCK_MASK BIT(7) + +/* DA7280_ADC_DATA_H1 (Address 0x2e) */ +#define DA7280_ADC_VDD_H_SHIFT 0 +#define DA7280_ADC_VDD_H_MASK (255 << 0) + +/* DA7280_ADC_DATA_L1 (Address 0x2f) */ +#define DA7280_ADC_VDD_L_SHIFT 0 +#define DA7280_ADC_VDD_L_MASK (127 << 0) + +/* DA7280_POLARITY (Address 0x43) */ +#define DA7280_POLARITY_SHIFT 0 +#define DA7280_POLARITY_MASK BIT(0) + +/* DA7280_LRA_AVR_H (Address 0x44) */ +#define DA7280_LRA_PER_AVERAGE_H_SHIFT 0 +#define DA7280_LRA_PER_AVERAGE_H_MASK (255 << 0) + +/* DA7280_LRA_AVR_L (Address 0x45) */ +#define DA7280_LRA_PER_AVERAGE_L_SHIFT 0 +#define DA7280_LRA_PER_AVERAGE_L_MASK (127 << 0) + +/* DA7280_FRQ_LRA_PER_ACT_H (Address 0x46) */ +#define DA7280_LRA_PER_ACTUAL_H_SHIFT 0 +#define DA7280_LRA_PER_ACTUAL_H_MASK (255 << 0) + +/* DA7280_FRQ_LRA_PER_ACT_L (Address 0x47) */ +#define DA7280_LRA_PER_ACTUAL_L_SHIFT 0 +#define DA7280_LRA_PER_ACTUAL_L_MASK (127 << 0) + +/* DA7280_FRQ_PHASE_H (Address 0x48) */ +#define DA7280_DELAY_H_SHIFT 0 +#define DA7280_DELAY_H_MASK (255 << 0) + +/* DA7280_FRQ_PHASE_L (Address 0x49) */ +#define DA7280_DELAY_SHIFT_L_SHIFT 0 +#define DA7280_DELAY_SHIFT_L_MASK (7 << 0) +#define DA7280_DELAY_FREEZE_SHIFT 7 +#define DA7280_DELAY_FREEZE_MASK BIT(7) + +/* DA7280_FRQ_CTL (Address 0x4c) */ +#define DA7280_FREQ_TRACKING_FORCE_ON_SHIFT 0 +#define DA7280_FREQ_TRACKING_FORCE_ON_MASK BIT(0) +#define DA7280_FREQ_TRACKING_AUTO_ADJ_SHIFT 1 +#define DA7280_FREQ_TRACKING_AUTO_ADJ_MASK BIT(1) + +/* DA7280_TRIM3 (Address 0x5f) */ +#define DA7280_REF_UVLO_THRES_SHIFT 3 +#define DA7280_REF_UVLO_THRES_MASK (3 << 3) +#define DA7280_LOOP_FILT_LOW_BW_SHIFT 5 +#define DA7280_LOOP_FILT_LOW_BW_MASK BIT(5) +#define DA7280_LOOP_IDAC_DOUBLE_RANGE_SHIFT 6 +#define DA7280_LOOP_IDAC_DOUBLE_RANGE_MASK BIT(6) + +/* DA7280_TRIM4 (Address 0x60) */ +#define DA7280_LOOP_FILT_RES_TRIM_SHIFT 0 +#define DA7280_LOOP_FILT_RES_TRIM_MASK (3 << 0) +#define DA7280_LOOP_FILT_CAP_TRIM_SHIFT 2 +#define DA7280_LOOP_FILT_CAP_TRIM_MASK (3 << 2) + +/* DA7280_TRIM6 (Address 0x62) */ +#define DA7280_HBRIDGE_ERC_HS_TRIM_SHIFT 0 +#define DA7280_HBRIDGE_ERC_HS_TRIM_MASK (3 << 0) +#define DA7280_HBRIDGE_ERC_LS_TRIM_SHIFT 2 +#define DA7280_HBRIDGE_ERC_LS_TRIM_MASK (3 << 2) + +/* DA7280_TOP_CFG5 (Address 0x6e) */ +#define DA7280_V2I_FACTOR_OFFSET_EN_SHIFT 0 +#define DA7280_V2I_FACTOR_OFFSET_EN_MASK BIT(0) +#define DA7280_FRQ_PAUSE_ON_POLARITY_CHANGE_SHIFT 1 +#define DA7280_FRQ_PAUSE_ON_POLARITY_CHANGE_MASK BIT(1) +#define DA7280_DELAY_BYPASS_SHIFT 2 +#define DA7280_DELAY_BYPASS_MASK BIT(2) + +/* DA7280_IRQ_EVENT_ACTUATOR_FAULT (Address 0x81) */ +#define DA7280_ADC_SAT_FAULT_SHIFT 2 +#define DA7280_ADC_SAT_FAULT_MASK BIT(2) + +/* DA7280_IRQ_STATUS2 (Address 0x82) */ +#define DA7280_STA_ADC_SAT_SHIFT 7 +#define DA7280_STA_ADC_SAT_MASK BIT(7) + +/* DA7280_IRQ_MASK2 (Address 0x83) */ +#define DA7280_ADC_SAT_M_SHIFT 7 +#define DA7280_ADC_SAT_M_MASK BIT(7) + +/* DA7280_SNP_MEM_XX (Address 0x84 ~ 0xe7) */ +#define DA7280_SNP_MEM_SHIFT 0 +#define DA7280_SNP_MEM_MASK (255 << 0) + +#endif -- end-of-patch for RESEND PATCH V8 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [RESEND PATCH V8 3/3] Input: new da7280 haptic driver 2020-02-11 1:13 ` Roy Im (?) @ 2020-02-11 14:26 ` Uwe Kleine-König 2020-02-14 1:35 ` Roy Im -1 siblings, 1 reply; 7+ messages in thread From: Uwe Kleine-König @ 2020-02-11 14:26 UTC (permalink / raw) To: Roy Im Cc: Bartosz Golaszewski, Brian Masney, Dmitry Torokhov, Greg KH, Lee Jones, Luca Weiss, Maximilian Luz, Pascal PAILLET-LME, Rob Herring, Samuel Ortiz, Thierry Reding, Thomas Gleixner, Support Opensource, linux-input, linux-kernel, linux-pwm On Tue, Feb 11, 2020 at 10:13:24AM +0900, Roy Im wrote: > diff --git a/drivers/input/misc/da7280.c b/drivers/input/misc/da7280.c > new file mode 100644 > index 0000000..4d1d1fc > --- /dev/null > +++ b/drivers/input/misc/da7280.c > @@ -0,0 +1,1688 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * DA7280 Haptic device driver > + * > + * Copyright (c) 2019 Dialog Semiconductor. > + * Author: Roy Im <Roy.Im.Opensource@diasemi.com> > + */ > + > +#include <linux/err.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/interrupt.h> > +#include <linux/module.h> > +#include <linux/pwm.h> > +#include <linux/regmap.h> > +#include <linux/workqueue.h> > +#include <linux/uaccess.h> > +#include "da7280.h" Don't introduce a header file that is only used once. Better put the definitions into the c file then. > [...] > +static int da7280_haptic_set_pwm(struct da7280_haptic *haptics) > +{ > + struct pwm_args pargs; > + u64 period_mag_multi; > + unsigned int pwm_duty; > + int error; > + > + pwm_get_args(haptics->pwm_dev, &pargs); > + period_mag_multi = > + (u64)(pargs.period * haptics->gain); This cast does not do anything, does it? > + if (haptics->acc_en) > + pwm_duty = > + (unsigned int)(period_mag_multi >> 16); > + else > + pwm_duty = > + (unsigned int)((period_mag_multi >> 16) > + + pargs.period) / 2; > + > + error = pwm_config(haptics->pwm_dev, > + pwm_duty, pargs.period); > + if (error) { > + dev_err(haptics->dev, > + "failed to configure pwm : %d\n", error); > + return error; > + } > + > + error = pwm_enable(haptics->pwm_dev); > + if (error) { > + pwm_disable(haptics->pwm_dev); > + dev_err(haptics->dev, > + "failed to enable haptics pwm device : %d\n", error); > + } You should not use the legacy pwm API. Please stick to pwm_apply_state(). Also consider using %pE for more expressive error messages. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ | ^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [RESEND PATCH V8 3/3] Input: new da7280 haptic driver 2020-02-11 14:26 ` Uwe Kleine-König @ 2020-02-14 1:35 ` Roy Im 0 siblings, 0 replies; 7+ messages in thread From: Roy Im @ 2020-02-14 1:35 UTC (permalink / raw) To: Uwe Kleine-König, Roy Im Cc: Bartosz Golaszewski, Brian Masney, Dmitry Torokhov, Greg KH, Lee Jones, Luca Weiss, Maximilian Luz, Pascal PAILLET-LME, Rob Herring, Samuel Ortiz, Thierry Reding, Thomas Gleixner, Support Opensource, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org On Tuesday, February 11, 2020 11:26 PM, Uwe Kleine-König wrote > On Tue, Feb 11, 2020 at 10:13:24AM +0900, Roy Im wrote: > > diff --git a/drivers/input/misc/da7280.c b/drivers/input/misc/da7280.c > > new file mode 100644 index 0000000..4d1d1fc > > --- /dev/null > > +++ b/drivers/input/misc/da7280.c > > @@ -0,0 +1,1688 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * DA7280 Haptic device driver > > + * > > + * Copyright (c) 2019 Dialog Semiconductor. > > + * Author: Roy Im <Roy.Im.Opensource@diasemi.com> */ > > + > > +#include <linux/err.h> > > +#include <linux/i2c.h> > > +#include <linux/input.h> > > +#include <linux/interrupt.h> > > +#include <linux/module.h> > > +#include <linux/pwm.h> > > +#include <linux/regmap.h> > > +#include <linux/workqueue.h> > > +#include <linux/uaccess.h> > > +#include "da7280.h" > > Don't introduce a header file that is only used once. Better put the definitions into the c file then. I will put the definitions into the c file. > > > [...] > > +static int da7280_haptic_set_pwm(struct da7280_haptic *haptics) { > > + struct pwm_args pargs; > > + u64 period_mag_multi; > > + unsigned int pwm_duty; > > + int error; > > + > > + pwm_get_args(haptics->pwm_dev, &pargs); > > + period_mag_multi = > > + (u64)(pargs.period * haptics->gain); > > This cast does not do anything, does it? I will remove this. > > > + if (haptics->acc_en) > > + pwm_duty = > > + (unsigned int)(period_mag_multi >> 16); > > + else > > + pwm_duty = > > + (unsigned int)((period_mag_multi >> 16) > > + + pargs.period) / 2; > > + > > + error = pwm_config(haptics->pwm_dev, > > + pwm_duty, pargs.period); > > + if (error) { > > + dev_err(haptics->dev, > > + "failed to configure pwm : %d\n", error); > > + return error; > > + } > > + > > + error = pwm_enable(haptics->pwm_dev); > > + if (error) { > > + pwm_disable(haptics->pwm_dev); > > + dev_err(haptics->dev, > > + "failed to enable haptics pwm device : %d\n", error); > > + } > > You should not use the legacy pwm API. Please stick to pwm_apply_state(). > > Also consider using %pE for more expressive error messages. I will replace the legacy pwm API and stick to pwm_apply_state() and consider using the %pE. > > Best regards > Uwe > > -- > Pengutronix e.K. | Uwe Kleine-König | > Industrial Linux Solutions | https://www.pengutronix.de/ | Hello Uwe, Thanks for your comments. I will try to update as you advise. Best regards, Roy ^ permalink raw reply [flat|nested] 7+ messages in thread
* [RESEND PATCH V8 2/3] dt-bindings: input: Add document bindings for DA7280 2020-02-11 1:13 [RESEND PATCH V8 0/3] da7280: haptic driver submission Roy Im 2020-02-11 1:13 ` Roy Im @ 2020-02-11 1:13 ` Roy Im 1 sibling, 0 replies; 7+ messages in thread From: Roy Im @ 2020-02-11 1:13 UTC (permalink / raw) To: Dmitry Torokhov, Mark Rutland, Rob Herring Cc: Support Opensource, devicetree, linux-input, linux-kernel Add device tree binding information for DA7280 haptic driver. Example bindings for DA7280 are added. Reviewed-by: Rob Herring <robh@kernel.org>. Signed-off-by: Roy Im <roy.im.opensource@diasemi.com> --- v8: Updated descriptions for new properties. v7: No changes. v6: No changes. v5: Updated descriptions and fixed errors. v4: Fixed commit message, properties. v3: Fixed subject format. v2: No changes .../devicetree/bindings/input/dlg,da7280.txt | 109 +++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/dlg,da7280.txt diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.txt b/Documentation/devicetree/bindings/input/dlg,da7280.txt new file mode 100644 index 0000000..e6b719d --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlg,da7280.txt @@ -0,0 +1,109 @@ +Dialog Semiconductor DA7280 Haptics bindings + +Required properties: +- compatible: Should be "dlg,da7280". +- reg: Specifies the I2C slave address. + +- interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from DA7280 are delivered to. + +- dlg,actuator-type: Set Actuator type. it should be one of: + "LRA" - Linear Resonance Actuator type. + "ERM-bar" - Bar type Eccentric Rotating Mass. + "ERM-coin" - Coin type Eccentric Rotating Mass. + +- dlg,const-op-mode: Haptic operation mode for FF_CONSTANT. + Possible values: + 1 - Direct register override(DRO) mode triggered by i2c(default), + 2 - PWM data source mode controlled by PWM duty, +- dlg,periodic-op-mode: Haptic operation mode for FF_PERIODIC. + Possible values: + 1 - Register triggered waveform memory(RTWM) mode, the pattern + assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP, + 2 - Edge triggered waveform memory(ETWM) mode, external GPI(N) + control are required to enable/disable and it needs to keep + device enabled by sending magnitude (X > 0), + the pattern is assigned to the GPI(N)_SEQUENCE_ID below. + The default value is 1 for both of the operation modes. + For more details, please see the datasheet. + +- dlg,nom-microvolt: Nominal actuator voltage rating. + Valid values: 0 - 6000000. +- dlg,abs-max-microvolt: Absolute actuator maximum voltage rating. + Valid values: 0 - 6000000. +- dlg,imax-microamp: Actuator max current rating. + Valid values: 0 - 252000. + Default: 130000. +- dlg,impd-micro-ohms: the impedance of the actuator in micro ohms. + Valid values: 0 - 1500000000. + +Optional properties: +- pwms : phandle to the physical PWM(Pulse Width Modulation) device. + PWM properties should be named "pwms". And number of cell is different + for each pwm device. + (See Documentation/devicetree/bindings/pwm/pwm.txt + for further information relating to pwm properties) + +- dlg,ps-seq-id: the PS_SEQ_ID(pattern ID in waveform memory inside chip) + to play back when RTWM-MODE is enabled. + Valid range: 0 - 15. +- dlg,ps-seq-loop: the PS_SEQ_LOOP, Number of times the pre-stored sequence + pointed to by PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated. + Valid range: 0 - 15. +- dlg,gpiN-seq-id: the GPI(N)_SEQUENCE_ID, pattern to play + when gpi0 is triggered, 'N' must be 0 - 2. + Valid range: 0 - 15. +- dlg,gpiN-mode: the pattern mode which can select either + "Single-pattern" or "Multi-pattern", 'N' must be 0 - 2. +- dlg,gpiN-polarity: gpiN polarity which can be chosen among + "Rising-edge", "Falling-edge" and "Both-edge", + 'N' must be 0 - 2 + Haptic will work by this edge option in case of ETWM mode. + +- dlg,resonant-freq-hz: use in case of LRA. + the frequency range: 50 - 300. + Default: 205. + +- dlg,bemf-sens-enable: Enable for internal loop computations. +- dlg,freq-track-enable: Enable for resonant frequency tracking. +- dlg,acc-enable: Enable for active acceleration. +- dlg,rapid-stop-enable: Enable for rapid stop. +- dlg,amp-pid-enable: Enable for the amplitude PID. +- dlg,mem-array: Customized waveform memory(patterns) data downloaded to + the device during initialization. This is an array of 100 values(u8). + +For further information, see device datasheet. + +====== + +Example: + + haptics: da7280-haptics@4a { + compatible = "dlg,da7280"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + dlg,actuator-type = "LRA"; + dlg,dlg,const-op-mode = <1>; + dlg,dlg,periodic-op-mode = <1>; + dlg,nom-microvolt = <2000000>; + dlg,abs-max-microvolt = <2000000>; + dlg,imax-microamp = <170000>; + dlg,resonant-freq-hz = <180>; + dlg,impd-micro-ohms = <10500000>; + dlg,freq-track-enable; + dlg,rapid-stop-enable; + dlg,mem-array = < + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + >; + + }; -- end-of-patch for RESEND PATCH V8 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [RESEND PATCH V8 0/3] da7280: haptic driver submission @ 2019-12-20 8:26 Roy Im 0 siblings, 0 replies; 7+ messages in thread From: Roy Im @ 2019-12-20 8:26 UTC (permalink / raw) To: David S. Miller, Uwe Kleine-Koenig, Dmitry Torokhov, Greg Kroah-Hartman, Lee Jones, Mark Rutland, Mauro Carvalho Chehab, Maximilian Luz, Rob Herring, Rob Herring, Thierry Reding Cc: Support Opensource, devicetree, linux-input, linux-kernel This patch adds support for the Dialog DA7280 Haptic driver IC. In this patch set the following is provided: [PATCH V8 1/3] MAINTAINERS file update for DA7280 [PATCH V8 2/3] DA7280 DT Binding [PATCH V8 3/3] DA7280 Driver This patch applies against linux-next and v5.4 Thank you, Roy Im, Dialog Semiconductor Ltd. Roy Im (3): MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms dt-bindings: input: Add document bindings for DA7280 Input: new da7280 haptic driver .../devicetree/bindings/input/dlg,da7280.txt | 109 ++ MAINTAINERS | 2 + drivers/input/misc/Kconfig | 13 + drivers/input/misc/Makefile | 1 + drivers/input/misc/da7280.c | 1683 ++++++++++++++++++++ drivers/input/misc/da7280.h | 412 +++++ 6 files changed, 2220 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/dlg,da7280.txt create mode 100644 drivers/input/misc/da7280.c create mode 100644 drivers/input/misc/da7280.h -- end-of-patch for RESEND PATCH V8 ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-02-14 1:36 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-02-11 1:13 [RESEND PATCH V8 0/3] da7280: haptic driver submission Roy Im 2020-02-11 1:13 ` [RESEND PATCH V8 3/3] Input: new da7280 haptic driver Roy Im 2020-02-11 1:13 ` Roy Im 2020-02-11 14:26 ` Uwe Kleine-König 2020-02-14 1:35 ` Roy Im 2020-02-11 1:13 ` [RESEND PATCH V8 2/3] dt-bindings: input: Add document bindings for DA7280 Roy Im -- strict thread matches above, loose matches on Subject: below -- 2019-12-20 8:26 [RESEND PATCH V8 0/3] da7280: haptic driver submission Roy Im
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.