* [PATCH 0/2] add support for LSM6DSOP
@ 2020-11-29 9:43 Lorenzo Bianconi
2020-11-29 9:43 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOP Lorenzo Bianconi
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Lorenzo Bianconi @ 2020-11-29 9:43 UTC (permalink / raw)
To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree
Add support for LSM6DSOP IMU mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsop.pdf
This series is based on "iio: imu: st_lsmdsx: compact
st_lsm6dsx_sensor_settings table"
https://patchwork.kernel.org/project/linux-iio/list/?series=392743
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: add support to LSM6DSOP
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings
Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 1 +
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +++++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++
7 files changed, 20 insertions(+), 3 deletions(-)
--
2.28.0
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOP
2020-11-29 9:43 [PATCH 0/2] add support for LSM6DSOP Lorenzo Bianconi
@ 2020-11-29 9:43 ` Lorenzo Bianconi
2020-11-29 9:43 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings Lorenzo Bianconi
2020-11-29 13:04 ` [PATCH 0/2] add support for LSM6DSOP Jonathan Cameron
2 siblings, 0 replies; 4+ messages in thread
From: Lorenzo Bianconi @ 2020-11-29 9:43 UTC (permalink / raw)
To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree
Add support to STM LSM6DSOP (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsop.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +++++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++
6 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 76c7abbd1ae8..85860217aaf3 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c,
- ism330dhcx, lsm6dsrx, lsm6ds0, the accelerometer/gyroscope
+ ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, the accelerometer/gyroscope
of lsm9ds1 and lsm6dst.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index b81da6053b3c..5ef55763a6cc 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -30,6 +30,7 @@
#define ST_LSM6DS0_DEV_NAME "lsm6ds0"
#define ST_LSM6DSRX_DEV_NAME "lsm6dsrx"
#define ST_LSM6DST_DEV_NAME "lsm6dst"
+#define ST_LSM6DSOP_DEV_NAME "lsm6dsop"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
@@ -47,6 +48,7 @@ enum st_lsm6dsx_hw_id {
ST_LSM6DS0_ID,
ST_LSM6DSRX_ID,
ST_LSM6DST_ID,
+ ST_LSM6DSOP_ID,
ST_LSM6DSX_MAX_ID,
};
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 49923503b75a..f1103ecedd64 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -14,7 +14,7 @@
* (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
* value of the decimation factor and ODR set for each FIFO data set.
*
- * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/LSM6DSRX/ISM330DHCX/LSM6DST:
+ * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/LSM6DSRX/ISM330DHCX/LSM6DST/LSM6DSOP:
* The FIFO buffer can be configured to store data from gyroscope and
* accelerometer. Each sample is queued with a tag (1B) indicating data
* source (gyroscope, accelerometer, hw timer).
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index c05910fa0de6..467214e2e77c 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -26,7 +26,7 @@
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
* - FIFO size: 4KB
*
- * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX/LSM6DST:
+ * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP:
* - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416,
* 833
* - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
@@ -990,6 +990,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.hw_id = ST_ASM330LHH_ID,
.name = ST_ASM330LHH_DEV_NAME,
.wai = 0x6b,
+ }, {
+ .hw_id = ST_LSM6DSOP_ID,
+ .name = ST_LSM6DSOP_DEV_NAME,
+ .wai = 0x6c,
},
},
.channels = {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index e0f945dde12d..ec8d4351390a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -98,6 +98,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
.compatible = "st,lsm6dst",
.data = (void *)ST_LSM6DST_ID,
},
+ {
+ .compatible = "st,lsm6dsop",
+ .data = (void *)ST_LSM6DSOP_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -118,6 +122,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID },
{ ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID },
{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
+ { ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
{},
};
MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index c57895be8afe..349ec9c1890d 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -98,6 +98,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
.compatible = "st,lsm6dst",
.data = (void *)ST_LSM6DST_ID,
},
+ {
+ .compatible = "st,lsm6dsop",
+ .data = (void *)ST_LSM6DSOP_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -118,6 +122,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
{ ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID },
{ ST_LSM6DSRX_DEV_NAME, ST_LSM6DSRX_ID },
{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
+ { ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
{},
};
MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
--
2.28.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings
2020-11-29 9:43 [PATCH 0/2] add support for LSM6DSOP Lorenzo Bianconi
2020-11-29 9:43 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOP Lorenzo Bianconi
@ 2020-11-29 9:43 ` Lorenzo Bianconi
2020-11-29 13:04 ` [PATCH 0/2] add support for LSM6DSOP Jonathan Cameron
2 siblings, 0 replies; 4+ messages in thread
From: Lorenzo Bianconi @ 2020-11-29 9:43 UTC (permalink / raw)
To: jic23; +Cc: lorenzo.bianconi, linux-iio, devicetree
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index fc545a130b30..d9b3213318fb 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -30,6 +30,7 @@ properties:
- st,lsm6ds0
- st,lsm6dsrx
- st,lsm6dst
+ - st,lsm6dsop
reg:
maxItems: 1
--
2.28.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 0/2] add support for LSM6DSOP
2020-11-29 9:43 [PATCH 0/2] add support for LSM6DSOP Lorenzo Bianconi
2020-11-29 9:43 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOP Lorenzo Bianconi
2020-11-29 9:43 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings Lorenzo Bianconi
@ 2020-11-29 13:04 ` Jonathan Cameron
2 siblings, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2020-11-29 13:04 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: lorenzo.bianconi, linux-iio, devicetree
On Sun, 29 Nov 2020 10:43:05 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> Add support for LSM6DSOP IMU mems sensor
> https://www.st.com/resource/en/datasheet/lsm6dsop.pdf
>
> This series is based on "iio: imu: st_lsmdsx: compact
> st_lsm6dsx_sensor_settings table"
> https://patchwork.kernel.org/project/linux-iio/list/?series=392743
>
> Lorenzo Bianconi (2):
> iio: imu: st_lsm6dsx: add support to LSM6DSOP
> dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings
>
> Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 1 +
> drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 2 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +++++-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++
> 7 files changed, 20 insertions(+), 3 deletions(-)
>
Series applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to do work their magic.
Thanks,
Jonathan
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-11-29 13:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-29 9:43 [PATCH 0/2] add support for LSM6DSOP Lorenzo Bianconi
2020-11-29 9:43 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOP Lorenzo Bianconi
2020-11-29 9:43 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings Lorenzo Bianconi
2020-11-29 13:04 ` [PATCH 0/2] add support for LSM6DSOP Jonathan Cameron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.