[meta-yocto][dunfell 0/6] Patch review

[meta-yocto][dunfell 0/6] Patch review

[Steve Sakoman]

Please review this next set of patches for dunfell and have comments back
by end of day Tuesday.

Passed a-full on autobuilder:

https://autobuilder.yoctoproject.org/typhoon/#/builders/83/builds/1943

The following changes since commit 7972a9b48f61af7ac10d1881dcaaf9c5f48bfb87:

  poky.conf: Drop OELAYOUT_ABI poking (2021-03-01 03:55:33 -1000)

are available in the Git repository at:

  git://git.yoctoproject.org/meta-yocto contrib/dunfell-next
  http://git.yoctoproject.org/cgit.cgi/meta-yocto/log/?h=contrib/dunfell-next

Anuj Mittal (2):
  linux-yocto: update genericx86 to v5.4.87
  linux-yocto: update genericx86* to v5.4.94

Naveen Saini (1):
  linux-yocto: update genericx86* SRCREV for 5.4

Richard Purdie (1):
  local.conf.sample.extended: Bring back into sync with OE-Core

Vivien Didelot (2):
  local.conf.sample.extended: fix double 'of' typo
  local.conf.sample.extended: prefer INIT_MANAGER

 meta-poky/conf/local.conf.sample.extended     | 46 +++++++++++--------
 .../linux/linux-yocto_5.4.bbappend            |  8 ++--
 2 files changed, 31 insertions(+), 23 deletions(-)

-- 
2.25.1

[meta-yocto][dunfell 1/6] local.conf.sample.extended: fix double 'of' typo

[Steve Sakoman]

From: Vivien Didelot <vivien.didelot@gmail.com>

Remove the redundant 'of' word in the INITRAMFS_IMAGE comment.

Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 200b05182c74f3f4f778907d5ee92831adb3d77e)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 meta-poky/conf/local.conf.sample.extended | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/meta-poky/conf/local.conf.sample.extended b/meta-poky/conf/local.conf.sample.extended
index dc92a16..5e1edef 100644
--- a/meta-poky/conf/local.conf.sample.extended
+++ b/meta-poky/conf/local.conf.sample.extended
@@ -328,7 +328,7 @@ DISTRO_FEATURES_remove = "x11"
 # The INITRAMFS_IMAGE image variable will cause an additional recipe to
 # be built as a dependency to the what ever rootfs recipe you might be
 # using such as core-image-sato.  The initramfs might be needed for
-# the initial boot of of the target system such as to load kernel
+# the initial boot of the target system such as to load kernel
 # modules prior to mounting the root file system.
 #
 # INITRAMFS_IMAGE_BUNDLE variable controls if the image recipe
-- 
2.25.1

[meta-yocto][dunfell 2/6] local.conf.sample.extended: prefer INIT_MANAGER

[Steve Sakoman]

From: Vivien Didelot <vdidelot@pbsc.com>

Since the INIT_MANAGER variable has been introduced, there is no need
to append the distro features and set the init manager manually.

Replace the busybox/mdev and systemd examples with the 4 values
currently supported for the INIT_MANAGER variable.

Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 2433a0f78a7fdb8450ef9ec64fa044274ac7a9e1)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 meta-poky/conf/local.conf.sample.extended | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

diff --git a/meta-poky/conf/local.conf.sample.extended b/meta-poky/conf/local.conf.sample.extended
index 5e1edef..9e85736 100644
--- a/meta-poky/conf/local.conf.sample.extended
+++ b/meta-poky/conf/local.conf.sample.extended
@@ -368,20 +368,9 @@ DISTRO_FEATURES_remove = "x11"
 #
 
 #
-# Use busybox/mdev for system initialization
-#
-#VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
-#VIRTUAL-RUNTIME_login_manager = "busybox"
-#VIRTUAL-RUNTIME_init_manager = "busybox"
-#VIRTUAL-RUNTIME_initscripts = "initscripts"
-#VIRTUAL-RUNTIME_keymaps = "keymaps"
-#DISTRO_FEATURES_BACKFILL_CONSIDERED += "sysvinit"
-
-#
-# Use systemd for system initialization
+# System initialization
 #
-#DISTRO_FEATURES_append = " systemd"
-#DISTRO_FEATURES_BACKFILL_CONSIDERED += "sysvinit"
-#VIRTUAL-RUNTIME_login_manager = "shadow-base"
-#VIRTUAL-RUNTIME_init_manager = "systemd"
-#VIRTUAL-RUNTIME_initscripts = "systemd-compat-units"
+#INIT_MANAGER = "none"
+#INIT_MANAGER = "sysvinit"
+#INIT_MANAGER = "systemd"
+#INIT_MANAGER = "mdev-busybox"
-- 
2.25.1

[meta-yocto][dunfell 3/6] local.conf.sample.extended: Bring back into sync with OE-Core

[Steve Sakoman]

From: Richard Purdie <richard.purdie@linuxfoundation.org>

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit ea6e777cac72f22b56b2c8be0ba05ba164efe5de)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 meta-poky/conf/local.conf.sample.extended | 29 +++++++++++++++++++----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/meta-poky/conf/local.conf.sample.extended b/meta-poky/conf/local.conf.sample.extended
index 9e85736..54ba7ce 100644
--- a/meta-poky/conf/local.conf.sample.extended
+++ b/meta-poky/conf/local.conf.sample.extended
@@ -23,6 +23,13 @@
 #
 # For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
 # be appropriate for example.
+#
+# Some users are behind firewalls or use servers where the number of parallel connections
+# is limited. In such cases you can limit the number of fetch tasks which run in parallel by
+# setting the option below, in this case limiting to a maximum of 4 fetch tasks in parallel:
+#
+#do_fetch[number_threads] = "4"
+#
 
 # If you want to get an image based on directfb without x11 alter
 # DISTRO_FEATURES:
@@ -87,10 +94,7 @@ DISTRO_FEATURES_remove = "x11"
 # PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'
 
 # Uncomment these to build a package such that you can use gprof to profile it.
-# NOTE: This will only work with 'linux' targets, not
-# 'linux-uclibc', as uClibc doesn't provide the necessary
-# object files.  Also, don't build glibc itself with these
-# flags, or it'll fail to build.
+# NOTE: Don't build glibc itself with these flags, or it'll fail to build.
 #
 # PROFILE_OPTIMIZATION = "-pg"
 # SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
@@ -191,7 +195,8 @@ DISTRO_FEATURES_remove = "x11"
 #                           commercial_lame \
 #                           commercial_libmad \
 #                           commercial_libomxil \
-#                           commercial_mpeg2dec"
+#                           commercial_mpeg2dec \
+#                           commercial_qmmp"
 
 
 #
@@ -374,3 +379,17 @@ DISTRO_FEATURES_remove = "x11"
 #INIT_MANAGER = "sysvinit"
 #INIT_MANAGER = "systemd"
 #INIT_MANAGER = "mdev-busybox"
+
+#
+# Use a full set of packages instead of busybox for base utils
+#
+#PREFERRED_PROVIDER_base-utils = "packagegroup-core-base-utils"
+#VIRTUAL-RUNTIME_base-utils = "packagegroup-core-base-utils"
+#VIRTUAL-RUNTIME_base-utils-hwclock = "util-linux-hwclock"
+#VIRTUAL-RUNTIME_base-utils-syslog = "syslog"
+
+#
+# Enable LTO system-wide
+#
+#require conf/distro/include/lto.inc
+#DISTRO_FEATURES_append = " lto"
-- 
2.25.1

Re: [poky] [meta-yocto][dunfell 3/6] local.conf.sample.extended: Bring back into sync with OE-Core

[Khem Raj]

check if all it recommends is available in dunfell, e.g. I am not sure about lto

On Fri, Mar 5, 2021 at 6:38 AM Steve Sakoman <steve@sakoman.com> wrote:
>
> From: Richard Purdie <richard.purdie@linuxfoundation.org>
>
> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
> (cherry picked from commit ea6e777cac72f22b56b2c8be0ba05ba164efe5de)
> Signed-off-by: Steve Sakoman <steve@sakoman.com>
> ---
>  meta-poky/conf/local.conf.sample.extended | 29 +++++++++++++++++++----
>  1 file changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/meta-poky/conf/local.conf.sample.extended b/meta-poky/conf/local.conf.sample.extended
> index 9e85736..54ba7ce 100644
> --- a/meta-poky/conf/local.conf.sample.extended
> +++ b/meta-poky/conf/local.conf.sample.extended
> @@ -23,6 +23,13 @@
>  #
>  # For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
>  # be appropriate for example.
> +#
> +# Some users are behind firewalls or use servers where the number of parallel connections
> +# is limited. In such cases you can limit the number of fetch tasks which run in parallel by
> +# setting the option below, in this case limiting to a maximum of 4 fetch tasks in parallel:
> +#
> +#do_fetch[number_threads] = "4"
> +#
>
>  # If you want to get an image based on directfb without x11 alter
>  # DISTRO_FEATURES:
> @@ -87,10 +94,7 @@ DISTRO_FEATURES_remove = "x11"
>  # PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'
>
>  # Uncomment these to build a package such that you can use gprof to profile it.
> -# NOTE: This will only work with 'linux' targets, not
> -# 'linux-uclibc', as uClibc doesn't provide the necessary
> -# object files.  Also, don't build glibc itself with these
> -# flags, or it'll fail to build.
> +# NOTE: Don't build glibc itself with these flags, or it'll fail to build.
>  #
>  # PROFILE_OPTIMIZATION = "-pg"
>  # SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
> @@ -191,7 +195,8 @@ DISTRO_FEATURES_remove = "x11"
>  #                           commercial_lame \
>  #                           commercial_libmad \
>  #                           commercial_libomxil \
> -#                           commercial_mpeg2dec"
> +#                           commercial_mpeg2dec \
> +#                           commercial_qmmp"
>
>
>  #
> @@ -374,3 +379,17 @@ DISTRO_FEATURES_remove = "x11"
>  #INIT_MANAGER = "sysvinit"
>  #INIT_MANAGER = "systemd"
>  #INIT_MANAGER = "mdev-busybox"
> +
> +#
> +# Use a full set of packages instead of busybox for base utils
> +#
> +#PREFERRED_PROVIDER_base-utils = "packagegroup-core-base-utils"
> +#VIRTUAL-RUNTIME_base-utils = "packagegroup-core-base-utils"
> +#VIRTUAL-RUNTIME_base-utils-hwclock = "util-linux-hwclock"
> +#VIRTUAL-RUNTIME_base-utils-syslog = "syslog"
> +
> +#
> +# Enable LTO system-wide
> +#
> +#require conf/distro/include/lto.inc
> +#DISTRO_FEATURES_append = " lto"
> --
> 2.25.1
>
>
> 
>

Re: [poky] [meta-yocto][dunfell 3/6] local.conf.sample.extended: Bring back into sync with OE-Core

[Steve Sakoman]

On Fri, Mar 5, 2021 at 5:49 AM Khem Raj <raj.khem@gmail.com> wrote:
>
> check if all it recommends is available in dunfell, e.g. I am not sure about lto

Thanks for catching this Khem.  The other two patches were the
important ones, I'll drop this one from the pull request.

Steve

> On Fri, Mar 5, 2021 at 6:38 AM Steve Sakoman <steve@sakoman.com> wrote:
> >
> > From: Richard Purdie <richard.purdie@linuxfoundation.org>
> >
> > Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
> > (cherry picked from commit ea6e777cac72f22b56b2c8be0ba05ba164efe5de)
> > Signed-off-by: Steve Sakoman <steve@sakoman.com>
> > ---
> >  meta-poky/conf/local.conf.sample.extended | 29 +++++++++++++++++++----
> >  1 file changed, 24 insertions(+), 5 deletions(-)
> >
> > diff --git a/meta-poky/conf/local.conf.sample.extended b/meta-poky/conf/local.conf.sample.extended
> > index 9e85736..54ba7ce 100644
> > --- a/meta-poky/conf/local.conf.sample.extended
> > +++ b/meta-poky/conf/local.conf.sample.extended
> > @@ -23,6 +23,13 @@
> >  #
> >  # For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
> >  # be appropriate for example.
> > +#
> > +# Some users are behind firewalls or use servers where the number of parallel connections
> > +# is limited. In such cases you can limit the number of fetch tasks which run in parallel by
> > +# setting the option below, in this case limiting to a maximum of 4 fetch tasks in parallel:
> > +#
> > +#do_fetch[number_threads] = "4"
> > +#
> >
> >  # If you want to get an image based on directfb without x11 alter
> >  # DISTRO_FEATURES:
> > @@ -87,10 +94,7 @@ DISTRO_FEATURES_remove = "x11"
> >  # PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'
> >
> >  # Uncomment these to build a package such that you can use gprof to profile it.
> > -# NOTE: This will only work with 'linux' targets, not
> > -# 'linux-uclibc', as uClibc doesn't provide the necessary
> > -# object files.  Also, don't build glibc itself with these
> > -# flags, or it'll fail to build.
> > +# NOTE: Don't build glibc itself with these flags, or it'll fail to build.
> >  #
> >  # PROFILE_OPTIMIZATION = "-pg"
> >  # SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
> > @@ -191,7 +195,8 @@ DISTRO_FEATURES_remove = "x11"
> >  #                           commercial_lame \
> >  #                           commercial_libmad \
> >  #                           commercial_libomxil \
> > -#                           commercial_mpeg2dec"
> > +#                           commercial_mpeg2dec \
> > +#                           commercial_qmmp"
> >
> >
> >  #
> > @@ -374,3 +379,17 @@ DISTRO_FEATURES_remove = "x11"
> >  #INIT_MANAGER = "sysvinit"
> >  #INIT_MANAGER = "systemd"
> >  #INIT_MANAGER = "mdev-busybox"
> > +
> > +#
> > +# Use a full set of packages instead of busybox for base utils
> > +#
> > +#PREFERRED_PROVIDER_base-utils = "packagegroup-core-base-utils"
> > +#VIRTUAL-RUNTIME_base-utils = "packagegroup-core-base-utils"
> > +#VIRTUAL-RUNTIME_base-utils-hwclock = "util-linux-hwclock"
> > +#VIRTUAL-RUNTIME_base-utils-syslog = "syslog"
> > +
> > +#
> > +# Enable LTO system-wide
> > +#
> > +#require conf/distro/include/lto.inc
> > +#DISTRO_FEATURES_append = " lto"
> > --
> > 2.25.1
> >
> >
> > 
> >

[meta-yocto][dunfell 4/6] linux-yocto: update genericx86* SRCREV for 5.4

[Steve Sakoman]

From: Naveen Saini <naveen.kumar.saini@intel.com>

Bump to kernel release v5.4.69

Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 672c04902d733e150a5bbdbcb6cc9ce1cc5ee9a9)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 .../recipes-kernel/linux/linux-yocto_5.4.bbappend         | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
index 9c37f91..4ee895d 100644
--- a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
+++ b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
@@ -7,8 +7,8 @@ KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
 KMACHINE_beaglebone-yocto ?= "beaglebone"
 
-SRCREV_machine_genericx86 ?= "706efec4c1e270ec5dda92275898cd465dfdc7dd"
-SRCREV_machine_genericx86-64 ?= "706efec4c1e270ec5dda92275898cd465dfdc7dd"
+SRCREV_machine_genericx86 ?= "cfcdd63145c0d741e57ee3e3e58f794229c6c09c"
+SRCREV_machine_genericx86-64 ?= "cfcdd63145c0d741e57ee3e3e58f794229c6c09c"
 SRCREV_machine_edgerouter ?= "706efec4c1e270ec5dda92275898cd465dfdc7dd"
 SRCREV_machine_beaglebone-yocto ?= "706efec4c1e270ec5dda92275898cd465dfdc7dd"
 
@@ -17,7 +17,7 @@ COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
 COMPATIBLE_MACHINE_edgerouter = "edgerouter"
 COMPATIBLE_MACHINE_beaglebone-yocto = "beaglebone-yocto"
 
-LINUX_VERSION_genericx86 = "5.4.58"
-LINUX_VERSION_genericx86-64 = "5.4.58"
+LINUX_VERSION_genericx86 = "5.4.69"
+LINUX_VERSION_genericx86-64 = "5.4.69"
 LINUX_VERSION_edgerouter = "5.4.58"
 LINUX_VERSION_beaglebone-yocto = "5.4.58"
-- 
2.25.1

[meta-yocto][dunfell 5/6] linux-yocto: update genericx86 to v5.4.87

[Steve Sakoman]

From: Anuj Mittal <anuj.mittal@intel.com>

Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 5b5498295bfbe3ca7b2adf9e23228262c3e38f2d)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 .../recipes-kernel/linux/linux-yocto_5.4.bbappend         | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
index 4ee895d..91500b8 100644
--- a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
+++ b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
@@ -7,8 +7,8 @@ KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
 KMACHINE_beaglebone-yocto ?= "beaglebone"
 
-SRCREV_machine_genericx86 ?= "cfcdd63145c0d741e57ee3e3e58f794229c6c09c"
-SRCREV_machine_genericx86-64 ?= "cfcdd63145c0d741e57ee3e3e58f794229c6c09c"
+SRCREV_machine_genericx86 ?= "292d752af8e4015e40e7c523641983bac543e2b4"
+SRCREV_machine_genericx86-64 ?= "292d752af8e4015e40e7c523641983bac543e2b4"
 SRCREV_machine_edgerouter ?= "706efec4c1e270ec5dda92275898cd465dfdc7dd"
 SRCREV_machine_beaglebone-yocto ?= "706efec4c1e270ec5dda92275898cd465dfdc7dd"
 
@@ -17,7 +17,7 @@ COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
 COMPATIBLE_MACHINE_edgerouter = "edgerouter"
 COMPATIBLE_MACHINE_beaglebone-yocto = "beaglebone-yocto"
 
-LINUX_VERSION_genericx86 = "5.4.69"
-LINUX_VERSION_genericx86-64 = "5.4.69"
+LINUX_VERSION_genericx86 = "5.4.87"
+LINUX_VERSION_genericx86-64 = "5.4.87"
 LINUX_VERSION_edgerouter = "5.4.58"
 LINUX_VERSION_beaglebone-yocto = "5.4.58"
-- 
2.25.1

[meta-yocto][dunfell 6/6] linux-yocto: update genericx86* to v5.4.94

[Steve Sakoman]

From: Anuj Mittal <anuj.mittal@intel.com>

Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit b05a89a04002ddce2d82a22874def608e7748871)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
 .../recipes-kernel/linux/linux-yocto_5.4.bbappend         | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
index 91500b8..35147d2 100644
--- a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
+++ b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_5.4.bbappend
@@ -7,8 +7,8 @@ KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
 KMACHINE_beaglebone-yocto ?= "beaglebone"
 
-SRCREV_machine_genericx86 ?= "292d752af8e4015e40e7c523641983bac543e2b4"
-SRCREV_machine_genericx86-64 ?= "292d752af8e4015e40e7c523641983bac543e2b4"
+SRCREV_machine_genericx86 ?= "31db2b47ac7d8508080fbb7344399b501216de66"
+SRCREV_machine_genericx86-64 ?= "31db2b47ac7d8508080fbb7344399b501216de66"
 SRCREV_machine_edgerouter ?= "706efec4c1e270ec5dda92275898cd465dfdc7dd"
 SRCREV_machine_beaglebone-yocto ?= "706efec4c1e270ec5dda92275898cd465dfdc7dd"
 
@@ -17,7 +17,7 @@ COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
 COMPATIBLE_MACHINE_edgerouter = "edgerouter"
 COMPATIBLE_MACHINE_beaglebone-yocto = "beaglebone-yocto"
 
-LINUX_VERSION_genericx86 = "5.4.87"
-LINUX_VERSION_genericx86-64 = "5.4.87"
+LINUX_VERSION_genericx86 = "5.4.94"
+LINUX_VERSION_genericx86-64 = "5.4.94"
 LINUX_VERSION_edgerouter = "5.4.58"
 LINUX_VERSION_beaglebone-yocto = "5.4.58"
-- 
2.25.1