* [PATCH mptcp-next v4 1/5] selftests: mptcp: add ip mptcp wrappers
2022-01-13 9:29 [PATCH mptcp-next v4 0/5] use 'ip mptcp' in selftests Geliang Tang
@ 2022-01-13 9:29 ` Geliang Tang
2022-01-13 9:29 ` [PATCH mptcp-next v4 2/5] selftests: mptcp: new approach of getting ID Geliang Tang
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Geliang Tang @ 2022-01-13 9:29 UTC (permalink / raw)
To: mptcp; +Cc: Geliang Tang
This patch added four basic 'ip mptcp' wrappers:
pm_nl_set_limits()
pm_nl_add_endpoint()
pm_nl_del_endpoint()
pm_nl_flush_endpoint().
Wraped the PM netlink commands 'ip mptcp' and 'pm_nl_ctl' in them, and
used a new argument 'ip_mptcp' to choose which one to use for setting the
PM limits, adding or deleting the PM endpoint.
Used the wrappers in all the selftests in mptcp_join.sh instead of using
the pm_nl_ctl commands directly.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
---
.../testing/selftests/net/mptcp/mptcp_join.sh | 761 ++++++++++--------
1 file changed, 419 insertions(+), 342 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 1a751c86d956..e6492347d75d 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -15,6 +15,7 @@ timeout_test=$((timeout_poll * 2 + 1))
mptcp_connect=""
capture=0
checksum=0
+ip_mptcp=0
do_all_tests=1
TEST_COUNT=0
@@ -288,6 +289,82 @@ wait_rm_addr()
done
}
+pm_nl_set_limits()
+{
+ local ns=$1
+ local nr_addrs=$2
+ local nr_subflows=$3
+
+ if [ $ip_mptcp -eq 1 ]; then
+ ip -n $ns mptcp limits set add_addr_accepted $nr_addrs subflows $nr_subflows
+ else
+ ip netns exec $ns ./pm_nl_ctl limits $nr_addrs $nr_subflows
+ fi
+}
+
+pm_nl_add_endpoint()
+{
+ local ns=$1
+ local addr=$2
+ local flags
+ local port
+ local dev
+ local id
+ local nr=2
+
+ for p in $@
+ do
+ if [ $p = "flags" ]; then
+ eval _flags=\$"$nr"
+ [ ! -z $_flags ]; flags="flags $_flags"
+ fi
+ if [ $p = "dev" ]; then
+ eval _dev=\$"$nr"
+ [ ! -z $_dev ]; dev="dev $_dev"
+ fi
+ if [ $p = "id" ]; then
+ eval _id=\$"$nr"
+ [ ! -z $_id ]; id="id $_id"
+ fi
+ if [ $p = "port" ]; then
+ eval _port=\$"$nr"
+ [ ! -z $_port ]; port="port $_port"
+ fi
+
+ let nr+=1
+ done
+
+ if [ $ip_mptcp -eq 1 ]; then
+ ip -n $ns mptcp endpoint add $addr ${_flags/,/ } $dev $id $port
+ else
+ ip netns exec $ns ./pm_nl_ctl add $addr $flags $dev $id $port
+ fi
+}
+
+pm_nl_del_endpoint()
+{
+ local ns=$1
+ local id=$2
+ local addr=$3
+
+ if [ $ip_mptcp -eq 1 ]; then
+ ip -n $ns mptcp endpoint delete id $id $addr
+ else
+ ip netns exec $ns ./pm_nl_ctl del $id $addr
+ fi
+}
+
+pm_nl_flush_endpoint()
+{
+ local ns=$1
+
+ if [ $ip_mptcp -eq 1 ]; then
+ ip -n $ns mptcp endpoint flush
+ else
+ ip netns exec $ns ./pm_nl_ctl flush
+ fi
+}
+
do_transfer()
{
listener_ns="$1"
@@ -388,7 +465,7 @@ do_transfer()
else
addr="10.0.$counter.1"
fi
- ip netns exec $ns1 ./pm_nl_ctl add $addr flags signal
+ pm_nl_add_endpoint $ns1 $addr flags signal
let counter+=1
let add_nr_ns1-=1
done
@@ -403,16 +480,16 @@ do_transfer()
do
id=${dump[$pos]}
rm_addr=$(rm_addr_count ${connector_ns})
- ip netns exec ${listener_ns} ./pm_nl_ctl del $id
+ pm_nl_del_endpoint ${listener_ns} $id
wait_rm_addr ${connector_ns} ${rm_addr}
let counter+=1
let pos+=5
done
fi
elif [ $rm_nr_ns1 -eq 8 ]; then
- ip netns exec ${listener_ns} ./pm_nl_ctl flush
+ pm_nl_flush_endpoint ${listener_ns}
elif [ $rm_nr_ns1 -eq 9 ]; then
- ip netns exec ${listener_ns} ./pm_nl_ctl del 0 ${connect_addr}
+ pm_nl_del_endpoint ${listener_ns} 0 ${connect_addr}
fi
fi
@@ -436,7 +513,7 @@ do_transfer()
else
addr="10.0.$counter.2"
fi
- ip netns exec $ns2 ./pm_nl_ctl add $addr flags $flags
+ pm_nl_add_endpoint $ns2 $addr flags $flags
let counter+=1
let add_nr_ns2-=1
done
@@ -452,14 +529,14 @@ do_transfer()
# rm_addr are serialized, allow the previous one to complete
id=${dump[$pos]}
rm_addr=$(rm_addr_count ${listener_ns})
- ip netns exec ${connector_ns} ./pm_nl_ctl del $id
+ pm_nl_del_endpoint ${connector_ns} $id
wait_rm_addr ${listener_ns} ${rm_addr}
let counter+=1
let pos+=5
done
fi
elif [ $rm_nr_ns2 -eq 8 ]; then
- ip netns exec ${connector_ns} ./pm_nl_ctl flush
+ pm_nl_flush_endpoint ${connector_ns}
elif [ $rm_nr_ns2 -eq 9 ]; then
local addr
if is_v6 "${connect_addr}"; then
@@ -467,7 +544,7 @@ do_transfer()
else
addr="10.0.1.2"
fi
- ip netns exec ${connector_ns} ./pm_nl_ctl del 0 $addr
+ pm_nl_del_endpoint ${connector_ns} 0 $addr
fi
fi
@@ -1035,51 +1112,51 @@ subflows_tests()
# subflow limited by client
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 0
- ip netns exec $ns2 ./pm_nl_ctl limits 0 0
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 0
+ pm_nl_set_limits $ns2 0 0
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, limited by client" 0 0 0
# subflow limited by server
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 0
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 0
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, limited by server" 1 1 0
# subflow
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow" 1 1 1
# multiple subflows
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows" 2 2 2
# multiple subflows limited by server
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows, limited by server" 2 2 1
# single subflow, dev
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow dev ns2eth3
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow dev ns2eth3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow, dev" 1 1 1
}
@@ -1089,28 +1166,28 @@ subflows_error_tests()
# If a single subflow is configured, and matches the MPC src
# address, no additional subflow should be created
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.1.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "no MPC reuse with single endpoint" 0 0 0
# multiple subflows, with subflow creation error
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "multi subflows, with failing subflow" 1 1 1
# multiple subflows, with subflow timeout on MPJ
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j DROP
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "multi subflows, with subflow timeout" 1 1 1
@@ -1119,9 +1196,9 @@ subflows_error_tests()
# closed subflow (due to reset) is not reused if additional
# subflows are added later
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
@@ -1131,7 +1208,7 @@ subflows_error_tests()
# mpj subflow will be in TW after the reset
wait_for_tw $ns2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
wait
# additional subflow could be created only if the PM select
@@ -1143,16 +1220,16 @@ signal_address_tests()
{
# add_address, unused
reset
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "unused signal address" 0 0 0
chk_add_nr 1 1
# accept and use add_addr
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address" 1 1 1
chk_add_nr 1 1
@@ -1162,59 +1239,59 @@ signal_address_tests()
# belong to different subnets or one of the listed local address could be
# used for 'add_addr' subflow
reset
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 1 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 1 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal" 2 2 2
chk_add_nr 1 1
# accept and use add_addr with additional subflows
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ pm_nl_set_limits $ns1 0 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows and signal" 3 3 3
chk_add_nr 1 1
# signal addresses
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 3 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 3 3
+ pm_nl_set_limits $ns1 3 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+ pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal addresses" 3 3 3
chk_add_nr 3 3
# signal invalid addresses
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 3 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 3 3
+ pm_nl_set_limits $ns1 3 3
+ pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+ pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal invalid addresses" 1 1 1
chk_add_nr 3 3
# signal addresses race test
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 4 4
- ip netns exec $ns2 ./pm_nl_ctl limits 4 4
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.1.2 flags signal
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags signal
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags signal
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags signal
+ pm_nl_set_limits $ns1 4 4
+ pm_nl_set_limits $ns2 4 4
+ pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+ pm_nl_add_endpoint $ns2 10.0.1.2 flags signal
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags signal
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags signal
run_tests $ns1 $ns2 10.0.1.1
# the server will not signal the address terminating
@@ -1234,11 +1311,11 @@ link_failure_tests()
# active backup and link switch-over.
# Let's set some arbitrary (low) virtual link limits.
init_shapers
- ip netns exec $ns1 ./pm_nl_ctl limits 0 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 dev ns2eth4 flags subflow
+ pm_nl_set_limits $ns1 0 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "multiple flows, signal, link failure" 3 3 3
chk_add_nr 1 1
@@ -1248,11 +1325,11 @@ link_failure_tests()
# for bidirectional transfer
reset
init_shapers
- ip netns exec $ns1 ./pm_nl_ctl limits 0 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 dev ns2eth4 flags subflow
+ pm_nl_set_limits $ns1 0 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
run_tests $ns1 $ns2 10.0.1.1 2
chk_join_nr "multi flows, signal, bidi, link fail" 3 3 3
chk_add_nr 1 1
@@ -1262,11 +1339,11 @@ link_failure_tests()
# will never be used
reset
init_shapers
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+ pm_nl_set_limits $ns2 1 2
export FAILING_LINKS="1"
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "backup subflow unused, link failure" 2 2 2
chk_add_nr 1 1
@@ -1276,10 +1353,10 @@ link_failure_tests()
# the traffic
reset
init_shapers
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+ pm_nl_set_limits $ns2 1 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
export FAILING_LINKS="1 2"
run_tests $ns1 $ns2 10.0.1.1 1
chk_join_nr "backup flow used, multi links fail" 2 2 2
@@ -1291,10 +1368,10 @@ link_failure_tests()
# for bidirectional transfer
reset
init_shapers
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
run_tests $ns1 $ns2 10.0.1.1 2
chk_join_nr "backup flow used, bidi, link failure" 2 2 2
chk_add_nr 1 1
@@ -1306,38 +1383,38 @@ add_addr_timeout_tests()
{
# add_addr timeout
reset_with_add_addr_timeout
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
chk_add_nr 4 0
# add_addr timeout IPv6
reset_with_add_addr_timeout 6
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1
chk_add_nr 4 0
# signal addresses timeout
reset_with_add_addr_timeout
- ip netns exec $ns1 ./pm_nl_ctl limits 2 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+ pm_nl_set_limits $ns1 2 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1 0 0 0 least
chk_join_nr "signal addresses, ADD_ADDR timeout" 2 2 2
chk_add_nr 8 0
# signal invalid addresses timeout
reset_with_add_addr_timeout
- ip netns exec $ns1 ./pm_nl_ctl limits 2 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+ pm_nl_set_limits $ns1 2 2
+ pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1 0 0 0 least
chk_join_nr "invalid address, ADD_ADDR timeout" 1 1 1
chk_add_nr 8 0
@@ -1347,28 +1424,28 @@ remove_tests()
{
# single subflow, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
chk_join_nr "remove single subflow" 1 1 1
chk_rm_nr 1 1
# multiple subflows, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
chk_join_nr "remove multiple subflows" 2 2 2
chk_rm_nr 2 2
# single address, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
chk_join_nr "remove single address" 1 1 1
chk_add_nr 1 1
@@ -1376,10 +1453,10 @@ remove_tests()
# subflow and signal, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns2 1 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
chk_join_nr "remove subflow and signal" 2 2 2
chk_add_nr 1 1
@@ -1387,11 +1464,11 @@ remove_tests()
# subflows and signal, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ pm_nl_set_limits $ns1 0 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow
chk_join_nr "remove subflows and signal" 3 3 3
chk_add_nr 1 1
@@ -1399,11 +1476,11 @@ remove_tests()
# addresses remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 3 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal id 250
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 3 3
+ pm_nl_set_limits $ns1 3 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+ pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
chk_join_nr "remove addresses" 3 3 3
chk_add_nr 3 3
@@ -1411,11 +1488,11 @@ remove_tests()
# invalid addresses remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 3 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 3 3
+ pm_nl_set_limits $ns1 3 3
+ pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+ pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow
chk_join_nr "remove invalid addresses" 1 1 1
chk_add_nr 3 3
@@ -1423,11 +1500,11 @@ remove_tests()
# subflows and signal, flush
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ pm_nl_set_limits $ns1 0 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush subflows and signal" 3 3 3
chk_add_nr 1 1
@@ -1435,22 +1512,22 @@ remove_tests()
# subflows flush
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 3 3
- ip netns exec $ns2 ./pm_nl_ctl limits 3 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow id 150
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ pm_nl_set_limits $ns1 3 3
+ pm_nl_set_limits $ns2 3 3
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush subflows" 3 3 3
chk_rm_nr 3 3
# addresses flush
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 3 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal id 250
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 3 3
+ pm_nl_set_limits $ns1 3 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+ pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
chk_join_nr "flush addresses" 3 3 3
chk_add_nr 3 3
@@ -1458,11 +1535,11 @@ remove_tests()
# invalid addresses flush
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 3 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 3 3
+ pm_nl_set_limits $ns1 3 3
+ pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+ pm_nl_set_limits $ns2 3 3
run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow
chk_join_nr "flush invalid addresses" 1 1 1
chk_add_nr 3 3
@@ -1470,18 +1547,18 @@ remove_tests()
# remove id 0 subflow
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow
chk_join_nr "remove id 0 subflow" 1 1 1
chk_rm_nr 1 1
# remove id 0 address
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow
chk_join_nr "remove id 0 address" 1 1 1
chk_add_nr 1 1
@@ -1492,37 +1569,37 @@ add_tests()
{
# add single subflow
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
chk_join_nr "add single subflow" 1 1 1
# add signal address
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
chk_join_nr "add signal address" 1 1 1
chk_add_nr 1 1
# add multiple subflows
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
chk_join_nr "add multiple subflows" 2 2 2
# add multiple subflows IPv6
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow
chk_join_nr "add multiple subflows IPv6" 2 2 2
# add multiple addresses IPv6
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow
chk_join_nr "add multiple addresses IPv6" 2 2 2
chk_add_nr 2 2
@@ -1532,33 +1609,33 @@ ipv6_tests()
{
# subflow IPv6
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 dead:beef:3::2 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "single subflow IPv6" 1 1 1
# add_address, unused IPv6
reset
- ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "unused signal address IPv6" 0 0 0
chk_add_nr 1 1
# signal address IPv6
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
+ pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
chk_join_nr "single address IPv6" 1 1 1
chk_add_nr 1 1
# single address IPv6, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
+ pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow
chk_join_nr "remove single address IPv6" 1 1 1
chk_add_nr 1 1
@@ -1566,10 +1643,10 @@ ipv6_tests()
# subflow and signal IPv6, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 2
- ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
+ pm_nl_set_limits $ns2 1 2
+ pm_nl_add_endpoint $ns2 dead:beef:3::2 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow
chk_join_nr "remove subflow and signal IPv6" 2 2 2
chk_add_nr 1 1
@@ -1580,76 +1657,76 @@ v4mapped_tests()
{
# subflow IPv4-mapped to IPv4-mapped
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "single subflow IPv4-mapped" 1 1 1
# signal address IPv4-mapped with IPv4-mapped sk
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "signal address IPv4-mapped" 1 1 1
chk_add_nr 1 1
# subflow v4-map-v6
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "single subflow v4-map-v6" 1 1 1
# signal address v4-map-v6
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 "::ffff:10.0.1.1"
chk_join_nr "signal address v4-map-v6" 1 1 1
chk_add_nr 1 1
# subflow v6-map-v4
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow v6-map-v4" 1 1 1
# signal address v6-map-v4
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address v6-map-v4" 1 1 1
chk_add_nr 1 1
# no subflow IPv6 to v4 address
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "no JOIN with diff families v4-v6" 0 0 0
# no subflow IPv6 to v4 address even if v6 has a valid v4 at the end
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 dead:beef:2::10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "no JOIN with diff families v4-v6-2" 0 0 0
# no subflow IPv4 to v6 address, no need to slow down too then
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr "no JOIN with diff families v6-v4" 0 0 0
}
@@ -1658,9 +1735,9 @@ backup_tests()
{
# single subflow, backup
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,backup
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup
chk_join_nr "single subflow, backup" 1 1 1
chk_prio_nr 0 1
@@ -1668,9 +1745,9 @@ backup_tests()
# single address, backup
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
chk_join_nr "single address, backup" 1 1 1
chk_add_nr 1 1
@@ -1679,9 +1756,9 @@ backup_tests()
# single address with port, backup
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+ pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
chk_join_nr "single address with port, backup" 1 1 1
chk_add_nr 1 1
@@ -1692,28 +1769,28 @@ add_addr_ports_tests()
{
# signal address with port
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address with port" 1 1 1
chk_add_nr 1 1 1
# subflow and signal with port
reset
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 1 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 1 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal with port" 2 2 2
chk_add_nr 1 1 1
# single address with port, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+ pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
chk_join_nr "remove single address with port" 1 1 1
chk_add_nr 1 1 1
@@ -1721,10 +1798,10 @@ add_addr_ports_tests()
# subflow and signal with port, remove
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
- ip netns exec $ns2 ./pm_nl_ctl limits 1 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+ pm_nl_set_limits $ns2 1 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
chk_join_nr "remove subflow and signal with port" 2 2 2
chk_add_nr 1 1 1
@@ -1732,11 +1809,11 @@ add_addr_ports_tests()
# subflows and signal with port, flush
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ pm_nl_set_limits $ns1 0 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 -8 -2 slow
chk_join_nr "flush subflows and signal with port" 3 3 3
chk_add_nr 1 1
@@ -1744,20 +1821,20 @@ add_addr_ports_tests()
# multiple addresses with port
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 2 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10100
- ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+ pm_nl_set_limits $ns1 2 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10100
+ pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple addresses with port" 2 2 2
chk_add_nr 2 2 2
# multiple addresses with ports
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 2 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10101
- ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+ pm_nl_set_limits $ns1 2 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10101
+ pm_nl_set_limits $ns2 2 2
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple addresses with ports" 2 2 2
chk_add_nr 2 2 2
@@ -1767,56 +1844,56 @@ syncookies_tests()
{
# single subflow, syncookies
reset_with_cookies
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow with syn cookies" 1 1 1
# multiple subflows with syn cookies
reset_with_cookies
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows with syn cookies" 2 2 2
# multiple subflows limited by server
reset_with_cookies
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflows limited by server w cookies" 2 1 1
# test signal address with cookies
reset_with_cookies
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address with syn cookies" 1 1 1
chk_add_nr 1 1
# test cookie with subflow and signal
reset_with_cookies
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 1 2
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 1 2
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and signal w cookies" 2 2 2
chk_add_nr 1 1
# accept and use add_addr with additional subflows
reset_with_cookies
- ip netns exec $ns1 ./pm_nl_ctl limits 0 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+ pm_nl_set_limits $ns1 0 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflows and signal w. cookies" 3 3 3
chk_add_nr 1 1
@@ -1826,29 +1903,29 @@ checksum_tests()
{
# checksum test 0 0
reset_with_checksum 0 0
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_csum_nr "checksum test 0 0"
# checksum test 1 1
reset_with_checksum 1 1
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_csum_nr "checksum test 1 1"
# checksum test 0 1
reset_with_checksum 0 1
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_csum_nr "checksum test 0 1"
# checksum test 1 0
reset_with_checksum 1 0
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
run_tests $ns1 $ns2 10.0.1.1
chk_csum_nr "checksum test 1 0"
}
@@ -1857,26 +1934,26 @@ deny_join_id0_tests()
{
# subflow allow join id0 ns1
reset_with_allow_join_id0 1 0
- ip netns exec $ns1 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 1 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow allow join id0 ns1" 1 1 1
# subflow allow join id0 ns2
reset_with_allow_join_id0 0 1
- ip netns exec $ns1 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 1 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "single subflow allow join id0 ns2" 0 0 0
# signal address allow join id0 ns1
# ADD_ADDRs are not affected by allow_join_id0 value.
reset_with_allow_join_id0 1 0
- ip netns exec $ns1 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 1 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address allow join id0 ns1" 1 1 1
chk_add_nr 1 1
@@ -1884,28 +1961,28 @@ deny_join_id0_tests()
# signal address allow join id0 ns2
# ADD_ADDRs are not affected by allow_join_id0 value.
reset_with_allow_join_id0 0 1
- ip netns exec $ns1 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 1 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "signal address allow join id0 ns2" 1 1 1
chk_add_nr 1 1
# subflow and address allow join id0 ns1
reset_with_allow_join_id0 1 0
- ip netns exec $ns1 ./pm_nl_ctl limits 2 2
- ip netns exec $ns2 ./pm_nl_ctl limits 2 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 2 2
+ pm_nl_set_limits $ns2 2 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and address allow join id0 1" 2 2 2
# subflow and address allow join id0 ns2
reset_with_allow_join_id0 0 1
- ip netns exec $ns1 ./pm_nl_ctl limits 2 2
- ip netns exec $ns2 ./pm_nl_ctl limits 2 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 2 2
+ pm_nl_set_limits $ns2 2 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "subflow and address allow join id0 2" 1 1 1
}
@@ -1916,10 +1993,10 @@ fullmesh_tests()
# 2 fullmesh addrs in ns2, added before the connection,
# 1 non-fullmesh addr in ns1, added during the connection.
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 0 4
- ip netns exec $ns2 ./pm_nl_ctl limits 1 4
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow,fullmesh
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,fullmesh
+ pm_nl_set_limits $ns1 0 4
+ pm_nl_set_limits $ns2 1 4
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh
run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
chk_join_nr "fullmesh test 2x1" 4 4 4
chk_add_nr 1 1
@@ -1928,9 +2005,9 @@ fullmesh_tests()
# 1 non-fullmesh addr in ns1, added before the connection,
# 1 fullmesh addr in ns2, added during the connection.
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 1 3
- ip netns exec $ns2 ./pm_nl_ctl limits 1 3
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 1 3
+ pm_nl_set_limits $ns2 1 3
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow
chk_join_nr "fullmesh test 1x1" 3 3 3
chk_add_nr 1 1
@@ -1939,9 +2016,9 @@ fullmesh_tests()
# 1 non-fullmesh addr in ns1, added before the connection,
# 2 fullmesh addrs in ns2, added during the connection.
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 2 5
- ip netns exec $ns2 ./pm_nl_ctl limits 1 5
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 2 5
+ pm_nl_set_limits $ns2 1 5
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow
chk_join_nr "fullmesh test 1x2" 5 5 5
chk_add_nr 1 1
@@ -1951,18 +2028,18 @@ fullmesh_tests()
# 2 fullmesh addrs in ns2, added during the connection,
# limit max_subflows to 4.
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 2 4
- ip netns exec $ns2 ./pm_nl_ctl limits 1 4
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 2 4
+ pm_nl_set_limits $ns2 1 4
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow
chk_join_nr "fullmesh test 1x2, limited" 4 4 4
chk_add_nr 1 1
# set fullmesh flag
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 4 4
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags subflow
- ip netns exec $ns2 ./pm_nl_ctl limits 4 4
+ pm_nl_set_limits $ns1 4 4
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
+ pm_nl_set_limits $ns2 4 4
run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow fullmesh
chk_join_nr "set fullmesh flag test" 2 2 2
chk_prio_nr 0 1
@@ -1970,9 +2047,9 @@ fullmesh_tests()
# set nofullmesh flag
reset
- ip netns exec $ns1 ./pm_nl_ctl limits 4 4
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags subflow,fullmesh
- ip netns exec $ns2 ./pm_nl_ctl limits 4 4
+ pm_nl_set_limits $ns1 4 4
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
+ pm_nl_set_limits $ns2 4 4
run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow nofullmesh
chk_join_nr "set nofullmesh flag test" 2 2 2
chk_prio_nr 0 1
@@ -1984,9 +2061,9 @@ userspace_tests()
# userspace pm type prevents add_addr
reset
ip netns exec $ns1 sysctl -q net.mptcp.pm_type=1
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "userspace pm type prevents add_addr" 0 0 0
chk_add_nr 0 0
@@ -1994,9 +2071,9 @@ userspace_tests()
# userspace pm type echoes add_addr
reset
ip netns exec $ns2 sysctl -q net.mptcp.pm_type=1
- ip netns exec $ns1 ./pm_nl_ctl limits 0 2
- ip netns exec $ns2 ./pm_nl_ctl limits 0 2
- ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ pm_nl_set_limits $ns1 0 2
+ pm_nl_set_limits $ns2 0 2
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "userspace pm type echoes add_addr" 0 0 0
chk_add_nr 1 1
@@ -2004,27 +2081,27 @@ userspace_tests()
# userspace pm type rejects join
reset
ip netns exec $ns1 sysctl -q net.mptcp.pm_type=1
- ip netns exec $ns1 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 1 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "userspace pm type rejects join" 1 1 0
# userspace pm type does not send join
reset
ip netns exec $ns2 sysctl -q net.mptcp.pm_type=1
- ip netns exec $ns1 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 1 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "userspace pm type does not send join" 0 0 0
# userspace pm type prevents mp_prio
reset
ip netns exec $ns1 sysctl -q net.mptcp.pm_type=1
- ip netns exec $ns1 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl limits 1 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 1 1
+ pm_nl_set_limits $ns2 1 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
chk_join_nr "userspace pm type prevents mp_prio" 1 1 0
chk_prio_nr 0 0
@@ -2033,9 +2110,9 @@ userspace_tests()
reset
ip netns exec $ns1 sysctl -q net.mptcp.pm_type=1
ip netns exec $ns2 sysctl -q net.mptcp.pm_type=1
- ip netns exec $ns1 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl limits 0 1
- ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ pm_nl_set_limits $ns1 0 1
+ pm_nl_set_limits $ns2 0 1
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
chk_join_nr "userspace pm type prevents rm_addr" 0 0 0
chk_rm_nr 0 0
--
2.31.1
^ permalink raw reply related [flat|nested] 6+ messages in thread