[PATCH v4 00/14] arm64: dts: imx8mp-var-som-symphony: align DTS with hardware revision

[Stefano Radaelli <stefano.radaelli21@gmail.com>]

This series updates the i.MX8MP VAR-SOM and Symphony device trees to
better align them with the current hardware configuration.

It adds the missing board peripherals and completes the related pinctrl,
GPIO and bus configuration.

v3->v4:
 - Fixed USB irq edge type
 - Add HDMI HPD support
 - Add pcie reset-gpios instead of deprecated one
 - Fixed eth regulator

v2->v3:
 - Add FlexCAN2 controller support
 - Add FEC controller and MaxLinear MXL86110 PHY support
 - Describe PCIe PERST# reset GPIO

v1->v2:
 - Add missing HDMI pinctrl configuration
 - Enable LCDIF3 for the HDMI display pipeline
 - Adjust PCIe controller configuration
 - Update PTN5150 interrupt trigger type

Stefano Radaelli (14):
  arm64: dts: imx8mp-var-som-symphony: add input keys
  arm64: dts: imx8mp-var-som-symphony: enable USB support
  arm64: dts: imx8mp-var-som-symphony: add TPM support
  arm64: dts: imx8mp-var-som-symphony: add external RTC
  arm64: dts: imx8mp-var-som-symphony: enable header UARTs
  arm64: dts: imx8mp-var-som-symphony: enable PCIe
  arm64: dts: imx8mp-var-som-symphony: add HDMI support
  arm64: dts: imx8mp-var-som-symphony: add capacitive touchscreen
  arm64: dts: imx8mp-var-som-symphony: enable ECSPI2
  arm64: dts: imx8mp-var-som-symphony: keep RGB_SEL low
  arm64: dts: imx8mp-var-som-symphony: enable PWM1
  arm64: dts: imx8mp-var-som-symphony: enable CAN
  arm64: dts: imx8mp-var-som-symphony: add second Ethernet port
  arm64: dts: freescale: imx8mp-var-som: add I2C1 bus recovery GPIOs

 .../dts/freescale/imx8mp-var-som-symphony.dts | 397 +++++++++++++++++-
 .../boot/dts/freescale/imx8mp-var-som.dtsi    |  12 +-
 2 files changed, 407 insertions(+), 2 deletions(-)


base-commit: b3c1d1631f097619f8091f0293e027c4301285d6
-- 
2.47.3