From: Enzo Adriano <enzo.adriano.code@gmail.com>
To: andre.przywara@arm.com, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, wens@kernel.org, jernej.skrabec@gmail.com,
samuel@sholland.org
Cc: Maxime Ripard <mripard@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Junhui Liu <junhui.liu@pigmoral.tech>,
Jerome Brunet <jbrunet@baylibre.com>,
Pablo Mazzini <pmazzini@gmail.com>,
Vinicius Pedrosa <vinicius.eduardo.pedrosa@gmail.com>,
Alexander Sverdlin <alex@sverdlin.org>,
Jun Yan <jerrysteve1101@gmail.com>,
Lukas Schmid <lukas.schmid@netcube.li>
Subject: [PATCH v4 0/3] arm64: dts: allwinner: add A733/Cubie A7S support
Date: Thu, 19 Nov 2026 13:09:12 -0500 [thread overview]
Message-ID: <cover.1795034153.git.enzo.adriano.code@gmail.com> (raw)
This series adds the initial Allwinner A733 and Radxa Cubie A7S device
trees for UART0, the AXP318W PMIC and 3.3 V microSD.
Base: sunxi/for-next (03b3355ed7a39b4416f0d0a39061479b1aa13196).
Previous posting (v3):
https://lore.kernel.org/r/cover.1794227241.git.enzo.adriano.code@gmail.com
Changes in v4:
- 1/3: Carry Alexander Sverdlin's Reviewed-by.
- 2/3: Add a one-cluster CPU map and A55/A76 PMUs on PPI 7, using
GIC ppi-partitions. Change #interrupt-cells from 3 to 4 and add a
fourth cell to every GIC interrupt specifier. Drop Vinicius Pedrosa's
Tested-by because of the interrupt encoding change.
- 3/3: Sort root nodes and put status last. Move boot history below ---.
Runtime dependencies in application order:
[1] AXP318W PMIC v8
https://lore.kernel.org/r/20260910-axp318-regulator-v8-0-e906a61a7f3d@baylibre.com
[2] Pinctrl IRQ-bank v3
https://lore.kernel.org/r/20261025142412.112216-1-pmazzini@gmail.com
[3] A733 8250_dw v2, patches 1-4
https://lore.kernel.org/r/cover.1792439398.git.vinicius.eduardo.pedrosa@gmail.com
[4] Firmware-clock v2 for vendor-firmware warm reboot
https://lore.kernel.org/r/20261112-a733-fwclk-v2@gmail.com
[5] Pinctrl voltage-mode v3
https://lore.kernel.org/r/20261109-a733-pinctrl-v3@gmail.com
A7S DTB/schema checks need [1] 3/5, [2] 2/3 and [3] 3/4 before v4.
Validation: clean git am, arm64 defconfig Image, arm/sunxi.yaml binding
check and warning-free A7S W=2 CHECK_DTBS=y. The compiled DTB has one
eight-core cluster and two disjoint PMU partitions.
A November 18 RAM boot on Cubie A7S with vendor firmware used the base
and runtime dependencies above. Two context-only adaptations were needed:
PMIC v8 regulator allocation context and pinctrl voltage-mode v3 IRQ-bank
map context. CPUs 0-7 came online in one cluster. The A55 PMU covered
CPUs 0-5 and the A76 PMU CPUs 6-7; cycles and instructions counted and
PPI 7 overflow samples were observed on each CPU. The timer, console,
AXP318W probe and MMC0 read-only transfers worked; warm reboot returned
to vendor Linux unaided.
Untested: PMIC/NMI interrupt delivery, card writes, hotplug, suspend,
power-off, CPU capacity, 1.8 V switching, other UART/I2C and storage
instances, RTC alarms, EL2/ITS/MSI, and physical BLDO2 voltage.
Enzo Adriano (3):
dt-bindings: arm: sunxi: document Radxa Cubie A7S
arm64: dts: allwinner: add A733 SoC description
arm64: dts: allwinner: add Radxa Cubie A7S board
.../devicetree/bindings/arm/sunxi.yaml | 5 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun60i-a733-cubie-a7s.dts | 287 ++++++++
.../arm64/boot/dts/allwinner/sun60i-a733.dtsi | 657 ++++++++++++++++++
4 files changed, 950 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733-cubie-a7s.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733.dtsi
base-commit: 03b3355ed7a39b4416f0d0a39061479b1aa13196
next reply other threads:[~2026-11-19 18:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 18:09 Enzo Adriano [this message]
2026-11-19 18:09 ` [PATCH v4 1/3] dt-bindings: arm: sunxi: document Radxa Cubie A7S Enzo Adriano
2026-11-19 18:09 ` [PATCH v4 2/3] arm64: dts: allwinner: add A733 SoC description Enzo Adriano
2026-11-19 18:30 ` sashiko-bot
2026-11-19 18:09 ` [PATCH v4 3/3] arm64: dts: allwinner: add Radxa Cubie A7S board Enzo Adriano
2026-11-19 18:26 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1795034153.git.enzo.adriano.code@gmail.com \
--to=enzo.adriano.code@gmail.com \
--cc=alex@sverdlin.org \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=jerrysteve1101@gmail.com \
--cc=junhui.liu@pigmoral.tech \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=lukas.schmid@netcube.li \
--cc=mripard@kernel.org \
--cc=pmazzini@gmail.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=vinicius.eduardo.pedrosa@gmail.com \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.