[U-Boot-Users] at91rm9200 cpu & STM29W320DB70N6 (32M) flash & u-boot 1.1.1

[U-Boot-Users] at91rm9200 cpu & STM29W320DB70N6 (32M) flash & u-boot 1.1.1

[Josef Rendl]

Hi all,

I'm using an at91rm9200 cpu (not an at91rm9200dk board) with an
STM29W320DB70N6 flash and u-boot 1.1.1
u-boot runs with the at91rm9200dk_config settings but flash is wrong (Bank #
1: Atmel: AT49BV1614 (16Mbit)  Size: 2 MB in 40 Sectors ...)
When I try to use:
        #define CFG_FLASH_CFI 1
        #define CFG_FLASH_CFI_DRIVER 1
u-boot starts but shows only "missing or unknown FLASH type" with flinfo

Is this type of flash not supported ? or is my configuration wrong ?

Best regards,

Josef Rendl

[U-Boot-Users] at91rm9200 cpu & STM29W320DB70N6 (32M) flash & u-boot 1.1.1

[Wolfgang Denk]

In message <cpmpem$7ct$1@sea.gmane.org> you wrote:
> 
> I'm using an at91rm9200 cpu (not an at91rm9200dk board) with an
> STM29W320DB70N6 flash and u-boot 1.1.1

You risk wasting your time using old sources for current work. Please
use the top of CVS version.

> u-boot runs with the at91rm9200dk_config settings but flash is wrong (Bank #
> 1: Atmel: AT49BV1614 (16Mbit)  Size: 2 MB in 40 Sectors ...)
> When I try to use:
>         #define CFG_FLASH_CFI 1
>         #define CFG_FLASH_CFI_DRIVER 1
> u-boot starts but shows only "missing or unknown FLASH type" with flinfo
> 
> Is this type of flash not supported ? or is my configuration wrong ?

Yes.

[Did you really expoect another reply without giving any  information
about  your  hardware?  Of  course  we  can  only  guess  in  such  a
situation....]

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Those who hate and fight must stop themselves -- otherwise it is  not
stopped.
	-- Spock, "Day of the Dove", stardate unknown