From: Mathis <mathis_w@gmx.net>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Re: F8T001 version 1 and SuSE 9.2
Date: Sun, 30 Jan 2005 23:42:17 +0100 [thread overview]
Message-ID: <ctjnsv$58q$1@sea.gmane.org> (raw)
In-Reply-To: <1107121540.8384.23.camel@pegasus>
Marcel Holtmann schrieb:
> Hi,
>
>
>>T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
>>D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>>P: Vendor=0a5c ProdID=2033 Rev= 0.a0
>>C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
>>I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>>E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>>E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>>I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>>I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>>I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>>E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
>>E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
>
>
> this is the Broadcom 2033 dongle that needs a firmware download before
> it will work as H:2 dongle. You must install the bluez-firmware package
> and make sure that the bcm203x kernel driver is loaded. You can also
> call dmesg and check for an error message, because there must be one if
> the firmware isn't found.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
thanx, this information did help alot
Mathis
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2005-01-30 22:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-30 20:35 [Bluez-users] F8T001 version 1 and SuSE 9.2 Mathis
2005-01-30 20:49 ` Marcel Holtmann
2005-01-30 21:32 ` [Bluez-users] " Mathis
2005-01-30 21:45 ` Marcel Holtmann
2005-01-30 22:42 ` Mathis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='ctjnsv$58q$1@sea.gmane.org' \
--to=mathis_w@gmx.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.