[PATCH 0/4] optee: Add support for enumerating RPMB-dependent services

[PATCH 0/4] optee: Add support for enumerating RPMB-dependent services

[Jan Kiszka]

This allows to find firmware TPM again with recent OP-TEE versions,
possibly also other services. The StMM service was not affected because
it is directly invoked by efi_variable_tee when needed, and that is late
enough so that all dependencies are available by then.

See patches for further details.

Jan

Jan Kiszka (4):
  tee: optee: Add support for enumerating services that only need RPMB
  tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE
  mmc: Call back to optee after a successful mmc_init
  mmc: Make "MMC Device not found" a debug output

 drivers/mmc/mmc-uclass.c          |  2 +-
 drivers/mmc/mmc.c                 |  4 ++++
 drivers/mmc/mmc_legacy.c          |  2 +-
 drivers/tee/optee/core.c          | 37 ++++++++++++++++++++++++++++++-
 drivers/tee/optee/optee_private.h |  2 ++
 drivers/tee/optee/rpmb.c          | 11 +++++++++
 include/tee/optee.h               |  2 ++
 7 files changed, 57 insertions(+), 3 deletions(-)

-- 
2.47.3

[PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

Up to OP-TEE 4.4.0, all services that needed a supplicant where returned
by PTA_CMD_GET_DEVICES_SUPP. Since then, services that only need a
supplicant for the purpose of accessing the RPMB are only enumerated by
the new, separate PTA_CMD_GET_DEVICES_RPMB. U-Boot so far lacks support
for that, thus no longer finds such services, e.g. fTPM.

Perform the separate enumeration during probe but, as that may fail if
the MMC is not probed yet, also provide a callback to trigger a retry
when another MMC device becomes available.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 drivers/tee/optee/core.c          | 32 +++++++++++++++++++++++++++++++
 drivers/tee/optee/optee_private.h |  2 ++
 drivers/tee/optee/rpmb.c          | 11 +++++++++++
 include/tee/optee.h               |  2 ++
 4 files changed, 47 insertions(+)

diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index 4d67c948ec1..5600d5a4c7d 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -41,6 +41,13 @@
  */
 #define PTA_CMD_GET_DEVICES_SUPP	0x1
 
+/*
+ * PTA_CMD_GET_DEVICES_RPMB - List services only depending on RPMB support
+ *
+ * [out]    memref[0]: List of the UUIDs of service enumerated by OP-TEE
+ */
+#define PTA_CMD_GET_DEVICES_RPMB	0x2
+
 typedef void (optee_invoke_fn)(unsigned long, unsigned long, unsigned long,
 			       unsigned long, unsigned long, unsigned long,
 			       unsigned long, unsigned long,
@@ -210,6 +217,29 @@ static int bind_service_drivers(struct udevice *dev)
 	return ret2;
 }
 
+#ifdef CONFIG_SUPPORT_EMMC_RPMB
+void optee_bind_service_drivers_rpmb(struct udevice *dev)
+{
+	struct tee_shm *service_list = NULL;
+	size_t service_count;
+	u32 tee_sess;
+	int ret;
+
+	ret = open_enum_session(dev, &tee_sess);
+	if (ret)
+		return;
+
+	ret = enum_services(dev, &service_list, &service_count, tee_sess,
+			    PTA_CMD_GET_DEVICES_RPMB);
+	if (!ret && service_count)
+		ret = bind_service_list(dev, service_list, service_count);
+
+	tee_shm_free(service_list);
+
+	tee_close_session(dev, tee_sess);
+}
+#endif
+
 /**
  * reg_pair_to_ptr() - Make a pointer of 2 32-bit values
  * @reg0:	High bits of the pointer
@@ -852,6 +882,8 @@ static int optee_probe(struct udevice *dev)
 		ret = bind_service_drivers(dev);
 		if (ret)
 			dev_warn(dev, "optee service enumeration failed: %d\n", ret);
+		else
+			optee_bind_service_drivers_rpmb(dev);
 	} else if (IS_ENABLED(CONFIG_RNG_OPTEE)) {
 		/*
 		 * Discovery of TAs on the TEE bus is not supported in U-Boot:
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 1f07a27ee4b..b5a58df5b96 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -79,4 +79,6 @@ static inline void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg)
 
 void *optee_alloc_and_init_page_list(void *buf, ulong len, u64 *phys_buf_ptr);
 
+void optee_bind_service_drivers_rpmb(struct udevice *dev);
+
 #endif /* __OPTEE_PRIVATE_H */
diff --git a/drivers/tee/optee/rpmb.c b/drivers/tee/optee/rpmb.c
index bacced6af6c..f4a66641755 100644
--- a/drivers/tee/optee/rpmb.c
+++ b/drivers/tee/optee/rpmb.c
@@ -191,3 +191,14 @@ void optee_suppl_rpmb_release(struct udevice *dev)
 {
 	release_mmc(dev_get_priv(dev));
 }
+
+void optee_rpmb_available(void)
+{
+	struct udevice *dev;
+	struct uclass *uc;
+
+	uclass_id_foreach_dev(UCLASS_TEE, dev, uc) {
+		if (strcmp(dev->driver->name, "optee") == 0)
+			optee_bind_service_drivers_rpmb(dev);
+	}
+}
diff --git a/include/tee/optee.h b/include/tee/optee.h
index d1194493780..c12fda3cc73 100644
--- a/include/tee/optee.h
+++ b/include/tee/optee.h
@@ -74,4 +74,6 @@ static inline bool is_optee_smc_api(void)
 }
 #endif
 
+void optee_rpmb_available(void);
+
 #endif /* _OPTEE_H */
-- 
2.47.3

Re: [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB

[Kathpalia, Tanmay]

Hi Jan,

I am not an expert in TEE, but I went through this patch while reviewing
the MMC side of the series and found a few issues.

On 21-08-2026 14:58, Jan Kiszka wrote:
> From: Jan Kiszka<jan.kiszka@siemens.com>
>
> Up to OP-TEE 4.4.0, all services that needed a supplicant where returned
> by PTA_CMD_GET_DEVICES_SUPP. Since then, services that only need a
> supplicant for the purpose of accessing the RPMB are only enumerated by
> the new, separate PTA_CMD_GET_DEVICES_RPMB. U-Boot so far lacks support
> for that, thus no longer finds such services, e.g. fTPM.
>
> Perform the separate enumeration during probe but, as that may fail if
> the MMC is not probed yet, also provide a callback to trigger a retry
> when another MMC device becomes available.
>
> Signed-off-by: Jan Kiszka<jan.kiszka@siemens.com>
> ---
>   drivers/tee/optee/core.c          | 32 +++++++++++++++++++++++++++++++
>   drivers/tee/optee/optee_private.h |  2 ++
>   drivers/tee/optee/rpmb.c          | 11 +++++++++++
>   include/tee/optee.h               |  2 ++
>   4 files changed, 47 insertions(+)
>
> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> index 4d67c948ec1..5600d5a4c7d 100644
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -41,6 +41,13 @@
>    */
>   #define PTA_CMD_GET_DEVICES_SUPP	0x1
>   
> +/*
> + * PTA_CMD_GET_DEVICES_RPMB - List services only depending on RPMB support
> + *
> + * [out]    memref[0]: List of the UUIDs of service enumerated by OP-TEE
> + */
> +#define PTA_CMD_GET_DEVICES_RPMB	0x2
> +
>   typedef void (optee_invoke_fn)(unsigned long, unsigned long, unsigned long,
>   			       unsigned long, unsigned long, unsigned long,
>   			       unsigned long, unsigned long,
> @@ -210,6 +217,29 @@ static int bind_service_drivers(struct udevice *dev)
>   	return ret2;
>   }
>   
> +#ifdef CONFIG_SUPPORT_EMMC_RPMB
> +void optee_bind_service_drivers_rpmb(struct udevice *dev)

This function is only compiled when SUPPORT_EMMC_RPMB is set, but
optee_probe() calls it unconditionally after a successful
bind_service_drivers(). optee_private.h stubs other functions for the
!RPMB case, this new prototype has no such stub, so for
SUPPORT_EMMC_RPMB=n should fail to link.

> +{
> +	struct tee_shm *service_list = NULL;
> +	size_t service_count;
> +	u32 tee_sess;
> +	int ret;
> +
> +	ret = open_enum_session(dev, &tee_sess);
> +	if (ret)
> +		return;
> +
> +	ret = enum_services(dev, &service_list, &service_count, tee_sess,
> +			    PTA_CMD_GET_DEVICES_RPMB);
> +	if (!ret && service_count)
> +		ret = bind_service_list(dev, service_list, service_count);

A dev_dbg print would help here.

> +
> +	tee_shm_free(service_list);
> +
> +	tee_close_session(dev, tee_sess);
> +}
> +#endif
> +
>   /**
>    * reg_pair_to_ptr() - Make a pointer of 2 32-bit values
>    * @reg0:	High bits of the pointer
> @@ -852,6 +882,8 @@ static int optee_probe(struct udevice *dev)
>   		ret = bind_service_drivers(dev);
>   		if (ret)
>   			dev_warn(dev, "optee service enumeration failed: %d\n", ret);
> +		else
> +			optee_bind_service_drivers_rpmb(dev);
>   	} else if (IS_ENABLED(CONFIG_RNG_OPTEE)) {
>   		/*
>   		 * Discovery of TAs on the TEE bus is not supported in U-Boot:
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index 1f07a27ee4b..b5a58df5b96 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -79,4 +79,6 @@ static inline void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg)
>   
>   void *optee_alloc_and_init_page_list(void *buf, ulong len, u64 *phys_buf_ptr);
>   
> +void optee_bind_service_drivers_rpmb(struct udevice *dev);
> +

Please wrap this like the other RPMB helpers in this header (#ifdef
CONFIG_SUPPORT_EMMC_RPMB plus an empty inline stub), rather than a bare 
prototype.

>   #endif /* __OPTEE_PRIVATE_H */
> diff --git a/drivers/tee/optee/rpmb.c b/drivers/tee/optee/rpmb.c
> index bacced6af6c..f4a66641755 100644
> --- a/drivers/tee/optee/rpmb.c
> +++ b/drivers/tee/optee/rpmb.c
> @@ -191,3 +191,14 @@ void optee_suppl_rpmb_release(struct udevice *dev)
>   {
>   	release_mmc(dev_get_priv(dev));
>   }
> +
> +void optee_rpmb_available(void)
> +{
> +	struct udevice *dev;
> +	struct uclass *uc;
> +
> +	uclass_id_foreach_dev(UCLASS_TEE, dev, uc) {
> +		if (strcmp(dev->driver->name, "optee") == 0)
> +			optee_bind_service_drivers_rpmb(dev);
> +	}
> +}
> diff --git a/include/tee/optee.h b/include/tee/optee.h
> index d1194493780..c12fda3cc73 100644
> --- a/include/tee/optee.h
> +++ b/include/tee/optee.h
> @@ -74,4 +74,6 @@ static inline bool is_optee_smc_api(void)
>   }
>   #endif
>   
> +void optee_rpmb_available(void);
> +

When OPTEE=y and SUPPORT_EMMC_RPMB=n, where the call is made to
optee_rpmb_avaliable but the symbol only lives in rpmb.o. Either stub when
RPMB is off, or you can gate the MMC call on SUPPORT_EMMC_RPMB.

>   #endif /* _OPTEE_H */

Re: [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB

[Jan Kiszka]

On 23.08.26 16:31, Kathpalia, Tanmay wrote:
> Hi Jan,
> 
> I am not an expert in TEE, but I went through this patch while reviewing
> the MMC side of the series and found a few issues.
> 
> On 21-08-2026 14:58, Jan Kiszka wrote:
>> From: Jan Kiszka<jan.kiszka@siemens.com>
>>
>> Up to OP-TEE 4.4.0, all services that needed a supplicant where returned
>> by PTA_CMD_GET_DEVICES_SUPP. Since then, services that only need a
>> supplicant for the purpose of accessing the RPMB are only enumerated by
>> the new, separate PTA_CMD_GET_DEVICES_RPMB. U-Boot so far lacks support
>> for that, thus no longer finds such services, e.g. fTPM.
>>
>> Perform the separate enumeration during probe but, as that may fail if
>> the MMC is not probed yet, also provide a callback to trigger a retry
>> when another MMC device becomes available.
>>
>> Signed-off-by: Jan Kiszka<jan.kiszka@siemens.com>
>> ---
>>   drivers/tee/optee/core.c          | 32 +++++++++++++++++++++++++++++++
>>   drivers/tee/optee/optee_private.h |  2 ++
>>   drivers/tee/optee/rpmb.c          | 11 +++++++++++
>>   include/tee/optee.h               |  2 ++
>>   4 files changed, 47 insertions(+)
>>
>> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
>> index 4d67c948ec1..5600d5a4c7d 100644
>> --- a/drivers/tee/optee/core.c
>> +++ b/drivers/tee/optee/core.c
>> @@ -41,6 +41,13 @@
>>    */
>>   #define PTA_CMD_GET_DEVICES_SUPP    0x1
>>   +/*
>> + * PTA_CMD_GET_DEVICES_RPMB - List services only depending on RPMB
>> support
>> + *
>> + * [out]    memref[0]: List of the UUIDs of service enumerated by OP-TEE
>> + */
>> +#define PTA_CMD_GET_DEVICES_RPMB    0x2
>> +
>>   typedef void (optee_invoke_fn)(unsigned long, unsigned long,
>> unsigned long,
>>                      unsigned long, unsigned long, unsigned long,
>>                      unsigned long, unsigned long,
>> @@ -210,6 +217,29 @@ static int bind_service_drivers(struct udevice *dev)
>>       return ret2;
>>   }
>>   +#ifdef CONFIG_SUPPORT_EMMC_RPMB
>> +void optee_bind_service_drivers_rpmb(struct udevice *dev)
> 
> This function is only compiled when SUPPORT_EMMC_RPMB is set, but
> optee_probe() calls it unconditionally after a successful
> bind_service_drivers(). optee_private.h stubs other functions for the
> !RPMB case, this new prototype has no such stub, so for
> SUPPORT_EMMC_RPMB=n should fail to link.
> 

Yeah, thanks for reminding - I forgot again that the linker won't
resolve that. Will also refactor this to move the rpmb part into the
rpmb module.

>> +{
>> +    struct tee_shm *service_list = NULL;
>> +    size_t service_count;
>> +    u32 tee_sess;
>> +    int ret;
>> +
>> +    ret = open_enum_session(dev, &tee_sess);
>> +    if (ret)
>> +        return;
>> +
>> +    ret = enum_services(dev, &service_list, &service_count, tee_sess,
>> +                PTA_CMD_GET_DEVICES_RPMB);
>> +    if (!ret && service_count)
>> +        ret = bind_service_list(dev, service_list, service_count);
> 
> A dev_dbg print would help here.
> 

Of what exactly?

Thanks for the feedback,
Jan

-- 
Siemens AG, Foundational Technologies
Linux Expert Center

Re: [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB

[Kathpalia, Tanmay]

On 8/24/2026 12:02 AM, Jan Kiszka wrote:
> On 23.08.26 16:31, Kathpalia, Tanmay wrote:
>> Hi Jan,
>>
>> I am not an expert in TEE, but I went through this patch while reviewing
>> the MMC side of the series and found a few issues.
>>
>> On 21-08-2026 14:58, Jan Kiszka wrote:
>>> From: Jan Kiszka<jan.kiszka@siemens.com>
>>>
>>> Up to OP-TEE 4.4.0, all services that needed a supplicant where returned
>>> by PTA_CMD_GET_DEVICES_SUPP. Since then, services that only need a
>>> supplicant for the purpose of accessing the RPMB are only enumerated by
>>> the new, separate PTA_CMD_GET_DEVICES_RPMB. U-Boot so far lacks support
>>> for that, thus no longer finds such services, e.g. fTPM.
>>>
>>> Perform the separate enumeration during probe but, as that may fail if
>>> the MMC is not probed yet, also provide a callback to trigger a retry
>>> when another MMC device becomes available.
>>>
>>> Signed-off-by: Jan Kiszka<jan.kiszka@siemens.com>
>>> ---
>>>    drivers/tee/optee/core.c          | 32 +++++++++++++++++++++++++++++++
>>>    drivers/tee/optee/optee_private.h |  2 ++
>>>    drivers/tee/optee/rpmb.c          | 11 +++++++++++
>>>    include/tee/optee.h               |  2 ++
>>>    4 files changed, 47 insertions(+)
>>>
>>> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
>>> index 4d67c948ec1..5600d5a4c7d 100644
>>> --- a/drivers/tee/optee/core.c
>>> +++ b/drivers/tee/optee/core.c
>>> @@ -41,6 +41,13 @@
>>>     */
>>>    #define PTA_CMD_GET_DEVICES_SUPP    0x1
>>>    +/*
>>> + * PTA_CMD_GET_DEVICES_RPMB - List services only depending on RPMB
>>> support
>>> + *
>>> + * [out]    memref[0]: List of the UUIDs of service enumerated by OP-TEE
>>> + */
>>> +#define PTA_CMD_GET_DEVICES_RPMB    0x2
>>> +
>>>    typedef void (optee_invoke_fn)(unsigned long, unsigned long,
>>> unsigned long,
>>>                       unsigned long, unsigned long, unsigned long,
>>>                       unsigned long, unsigned long,
>>> @@ -210,6 +217,29 @@ static int bind_service_drivers(struct udevice *dev)
>>>        return ret2;
>>>    }
>>>    +#ifdef CONFIG_SUPPORT_EMMC_RPMB
>>> +void optee_bind_service_drivers_rpmb(struct udevice *dev)
>> This function is only compiled when SUPPORT_EMMC_RPMB is set, but
>> optee_probe() calls it unconditionally after a successful
>> bind_service_drivers(). optee_private.h stubs other functions for the
>> !RPMB case, this new prototype has no such stub, so for
>> SUPPORT_EMMC_RPMB=n should fail to link.
>>
> Yeah, thanks for reminding - I forgot again that the linker won't
> resolve that. Will also refactor this to move the rpmb part into the
> rpmb module.
>
>>> +{
>>> +    struct tee_shm *service_list = NULL;
>>> +    size_t service_count;
>>> +    u32 tee_sess;
>>> +    int ret;
>>> +
>>> +    ret = open_enum_session(dev, &tee_sess);
>>> +    if (ret)
>>> +        return;
>>> +
>>> +    ret = enum_services(dev, &service_list, &service_count, tee_sess,
>>> +                PTA_CMD_GET_DEVICES_RPMB);
>>> +    if (!ret && service_count)
>>> +        ret = bind_service_list(dev, service_list, service_count);
>> A dev_dbg print would help here.
>>
> Of what exactly?
>

Sorry, that was unclear. I meant the early returns, not the successful
bind.
open_enum_session() and enum_services() can fail and the function
just returns. Patch 3 will retry this from mmc_init(), so a dev_dbg()
on those failures would make that retry easier to follow.

Thanks,
Tanmay

Re: [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB

[Jan Kiszka]

On 23.08.26 21:09, Kathpalia, Tanmay wrote:
> 
> On 8/24/2026 12:02 AM, Jan Kiszka wrote:
>> On 23.08.26 16:31, Kathpalia, Tanmay wrote:
>>> Hi Jan,
>>>
>>> I am not an expert in TEE, but I went through this patch while reviewing
>>> the MMC side of the series and found a few issues.
>>>
>>> On 21-08-2026 14:58, Jan Kiszka wrote:
>>>> From: Jan Kiszka<jan.kiszka@siemens.com>
>>>>
>>>> Up to OP-TEE 4.4.0, all services that needed a supplicant where
>>>> returned
>>>> by PTA_CMD_GET_DEVICES_SUPP. Since then, services that only need a
>>>> supplicant for the purpose of accessing the RPMB are only enumerated by
>>>> the new, separate PTA_CMD_GET_DEVICES_RPMB. U-Boot so far lacks support
>>>> for that, thus no longer finds such services, e.g. fTPM.
>>>>
>>>> Perform the separate enumeration during probe but, as that may fail if
>>>> the MMC is not probed yet, also provide a callback to trigger a retry
>>>> when another MMC device becomes available.
>>>>
>>>> Signed-off-by: Jan Kiszka<jan.kiszka@siemens.com>
>>>> ---
>>>>    drivers/tee/optee/core.c          | 32 ++++++++++++++++++++++++++
>>>> +++++
>>>>    drivers/tee/optee/optee_private.h |  2 ++
>>>>    drivers/tee/optee/rpmb.c          | 11 +++++++++++
>>>>    include/tee/optee.h               |  2 ++
>>>>    4 files changed, 47 insertions(+)
>>>>
>>>> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
>>>> index 4d67c948ec1..5600d5a4c7d 100644
>>>> --- a/drivers/tee/optee/core.c
>>>> +++ b/drivers/tee/optee/core.c
>>>> @@ -41,6 +41,13 @@
>>>>     */
>>>>    #define PTA_CMD_GET_DEVICES_SUPP    0x1
>>>>    +/*
>>>> + * PTA_CMD_GET_DEVICES_RPMB - List services only depending on RPMB
>>>> support
>>>> + *
>>>> + * [out]    memref[0]: List of the UUIDs of service enumerated by
>>>> OP-TEE
>>>> + */
>>>> +#define PTA_CMD_GET_DEVICES_RPMB    0x2
>>>> +
>>>>    typedef void (optee_invoke_fn)(unsigned long, unsigned long,
>>>> unsigned long,
>>>>                       unsigned long, unsigned long, unsigned long,
>>>>                       unsigned long, unsigned long,
>>>> @@ -210,6 +217,29 @@ static int bind_service_drivers(struct udevice
>>>> *dev)
>>>>        return ret2;
>>>>    }
>>>>    +#ifdef CONFIG_SUPPORT_EMMC_RPMB
>>>> +void optee_bind_service_drivers_rpmb(struct udevice *dev)
>>> This function is only compiled when SUPPORT_EMMC_RPMB is set, but
>>> optee_probe() calls it unconditionally after a successful
>>> bind_service_drivers(). optee_private.h stubs other functions for the
>>> !RPMB case, this new prototype has no such stub, so for
>>> SUPPORT_EMMC_RPMB=n should fail to link.
>>>
>> Yeah, thanks for reminding - I forgot again that the linker won't
>> resolve that. Will also refactor this to move the rpmb part into the
>> rpmb module.
>>
>>>> +{
>>>> +    struct tee_shm *service_list = NULL;
>>>> +    size_t service_count;
>>>> +    u32 tee_sess;
>>>> +    int ret;
>>>> +
>>>> +    ret = open_enum_session(dev, &tee_sess);
>>>> +    if (ret)
>>>> +        return;
>>>> +
>>>> +    ret = enum_services(dev, &service_list, &service_count, tee_sess,
>>>> +                PTA_CMD_GET_DEVICES_RPMB);
>>>> +    if (!ret && service_count)
>>>> +        ret = bind_service_list(dev, service_list, service_count);
>>> A dev_dbg print would help here.
>>>
>> Of what exactly?
>>
> 
> Sorry, that was unclear. I meant the early returns, not the successful
> bind.
> open_enum_session() and enum_services() can fail and the function
> just returns. Patch 3 will retry this from mmc_init(), so a dev_dbg()
> on those failures would make that retry easier to follow.
> 

That's what patch 2 is for. Other enumeration errors are printed
unconditionally by __enum_services.

Jan

-- 
Siemens AG, Foundational Technologies
Linux Expert Center

[PATCH 2/4] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

This is a transitional error that is resolved once an RPMB becomes
available. Keep it as debug output only.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 drivers/tee/optee/core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index 5600d5a4c7d..4b1396b8652 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -126,7 +126,10 @@ static int __enum_services(struct udevice *dev, struct tee_shm *shm, size_t *shm
 
 	ret = tee_invoke_func(dev, &arg, 1, &param);
 	if (ret || (arg.ret && arg.ret != TEE_ERROR_SHORT_BUFFER)) {
-		dev_err(dev, "Enumeration command 0x%x failed: 0x%x\n", pta_cmd, arg.ret);
+		if (arg.ret != TEE_ERROR_STORAGE_NOT_AVAILABLE)
+			dev_err(dev, "Enumeration command 0x%x failed: 0x%x\n", pta_cmd, arg.ret);
+		else
+			debug("Enumeration command 0x%x failed due to unavailable storage\n", pta_cmd);
 		return -EINVAL;
 	}
 
-- 
2.47.3

Re: [PATCH 2/4] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE

[Kathpalia, Tanmay]

Hi Jan,

One minor nit.


On 21-08-2026 14:58, Jan Kiszka wrote:
> From: Jan Kiszka<jan.kiszka@siemens.com>
>
> This is a transitional error that is resolved once an RPMB becomes
> available. Keep it as debug output only.
>
> Signed-off-by: Jan Kiszka<jan.kiszka@siemens.com>
> ---
>   drivers/tee/optee/core.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> index 5600d5a4c7d..4b1396b8652 100644
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -126,7 +126,10 @@ static int __enum_services(struct udevice *dev, struct tee_shm *shm, size_t *shm
>   
>   	ret = tee_invoke_func(dev, &arg, 1, &param);
>   	if (ret || (arg.ret && arg.ret != TEE_ERROR_SHORT_BUFFER)) {
> -		dev_err(dev, "Enumeration command 0x%x failed: 0x%x\n", pta_cmd, arg.ret);
> +		if (arg.ret != TEE_ERROR_STORAGE_NOT_AVAILABLE)
> +			dev_err(dev, "Enumeration command 0x%x failed: 0x%x\n", pta_cmd, arg.ret);
> +		else
> +			debug("Enumeration command 0x%x failed due to unavailable storage\n", pta_cmd);

Prefer dev_dbg() over debug() so the device name stays in the log, same 
as the dev_err path.

>   

[PATCH 3/4] mmc: Call back to optee after a successful mmc_init

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

This is needed to that OP-TEE can re-enumerate services which need RPMB
access that may have become available now.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
CC: Peng Fan <peng.fan@nxp.com>
CC: Jaehoon Chung <jh80.chung@samsung.com>
---
 drivers/mmc/mmc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 670e92ee12b..2463e50cd3c 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/printk.h>
 #include <div64.h>
+#include <tee/optee.h>
 #include "mmc_private.h"
 
 #define DEFAULT_CMD6_TIMEOUT_MS  500
@@ -3168,6 +3169,9 @@ int mmc_init(struct mmc *mmc)
 				mmc->cfg->name);
 	}
 
+	if (CONFIG_IS_ENABLED(OPTEE) && mmc->capacity_rpmb > 0)
+		optee_rpmb_available();
+
 	return err;
 }
 
-- 
2.47.3

Re: [PATCH 3/4] mmc: Call back to optee after a successful mmc_init

[Kathpalia, Tanmay]

Hi Jan,

On 21-08-2026 14:59, Jan Kiszka wrote:
> From: Jan Kiszka<jan.kiszka@siemens.com>
>
> This is needed to that OP-TEE can re-enumerate services which need RPMB
> access that may have become available now.
>
> Signed-off-by: Jan Kiszka<jan.kiszka@siemens.com>
> ---
> CC: Peng Fan<peng.fan@nxp.com>
> CC: Jaehoon Chung<jh80.chung@samsung.com>
> ---
>   drivers/mmc/mmc.c | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index 670e92ee12b..2463e50cd3c 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -27,6 +27,7 @@
>   #include <linux/list.h>
>   #include <linux/printk.h>
>   #include <div64.h>
> +#include <tee/optee.h>

The include is unconditional while the call is not.

>   #include "mmc_private.h"
>   
>   #define DEFAULT_CMD6_TIMEOUT_MS  500
> @@ -3168,6 +3169,9 @@ int mmc_init(struct mmc *mmc)
>   				mmc->cfg->name);
>   	}
>   
> +	if (CONFIG_IS_ENABLED(OPTEE) && mmc->capacity_rpmb > 0)

It will fail to link when OPTEE=y and SUPPORT_EMMC_RPMB=n. Add
SUPPORT_EMMC_RPMB (or stub the symbol when RPMB is off).

> +		optee_rpmb_available();
> +
>   	return err;
>   }
>   

[PATCH 4/4] mmc: Make "MMC Device not found" a debug output

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

Callers of find_mmc_device are generally processing and informing about
errors already, e.g.

=> mmc dev 2
MMC Device 2 not found
no mmc device at slot 2

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
CC: Peng Fan <peng.fan@nxp.com>
CC: Jaehoon Chung <jh80.chung@samsung.com>
---
 drivers/mmc/mmc-uclass.c | 2 +-
 drivers/mmc/mmc_legacy.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index 698530088fe..cd930807802 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -319,7 +319,7 @@ struct mmc *find_mmc_device(int dev_num)
 
 	if (ret) {
 #if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-		printf("MMC Device %d not found\n", dev_num);
+		debug("MMC Device %d not found\n", dev_num);
 #endif
 		return NULL;
 	}
diff --git a/drivers/mmc/mmc_legacy.c b/drivers/mmc/mmc_legacy.c
index 8f8ba34be71..2a4a8a83fb3 100644
--- a/drivers/mmc/mmc_legacy.c
+++ b/drivers/mmc/mmc_legacy.c
@@ -45,7 +45,7 @@ struct mmc *find_mmc_device(int dev_num)
 	}
 
 #if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-	printf("MMC Device %d not found\n", dev_num);
+	debug("MMC Device %d not found\n", dev_num);
 #endif
 
 	return NULL;
-- 
2.47.3