From: Subhash Jadavani <subhashj@codeaurora.org>
To: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: kishon@ti.com, jejb@linux.vnet.ibm.com, vinholikatti@gmail.com,
martin.petersen@oracle.com, linux-kernel@vger.kernel.org,
linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 08/10] ufs-qcom: phy/hcd: Refactoring phy clock handling
Date: Tue, 18 Oct 2016 13:13:44 -0700 [thread overview]
Message-ID: <d105d41f88e886f20df0384569b0b688@codeaurora.org> (raw)
In-Reply-To: <1476800897-19898-9-git-send-email-vivek.gautam@codeaurora.org>
On 2016-10-18 07:28, Vivek Gautam wrote:
> Add phy clock enable code to phy_power_on/off callbacks, and
> remove explicit calls to enable these phy clocks from the
> ufs-qcom hcd driver.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> ---
>
> Changes since v1:
> - staticized ufs_qcom_phy_enable(/disable)_ref_clk(),
> - staticized ufs_qcom_phy_enable(/disable)_iface_clk()
> - removed function declaration and export symbol for these APIs.
>
> drivers/phy/phy-qcom-ufs.c | 36
> ++++++++++++++++++------------------
> drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
> include/linux/phy/phy-qcom-ufs.h | 18 ------------------
> 3 files changed, 18 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
> index 144b11f..a425cc2 100644
> --- a/drivers/phy/phy-qcom-ufs.c
> +++ b/drivers/phy/phy-qcom-ufs.c
> @@ -373,10 +373,9 @@ out:
> return ret;
> }
>
> -int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy)
> +static int ufs_qcom_phy_enable_ref_clk(struct ufs_qcom_phy *phy)
> {
> int ret = 0;
> - struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
>
> if (phy->is_ref_clk_enabled)
> goto out;
> @@ -423,7 +422,6 @@ out_disable_src:
> out:
> return ret;
> }
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk);
>
> static
> int ufs_qcom_phy_disable_vreg(struct device *dev,
> @@ -448,10 +446,8 @@ out:
> return ret;
> }
>
> -void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
> +static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy)
> {
> - struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
> -
> if (phy->is_ref_clk_enabled) {
> clk_disable_unprepare(phy->ref_clk);
> /*
> @@ -464,7 +460,6 @@ void ufs_qcom_phy_disable_ref_clk(struct phy
> *generic_phy)
> phy->is_ref_clk_enabled = false;
> }
> }
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk);
>
> #define UFS_REF_CLK_EN (1 << 5)
>
> @@ -517,9 +512,8 @@ void ufs_qcom_phy_disable_dev_ref_clk(struct phy
> *generic_phy)
> EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
>
> /* Turn ON M-PHY RMMI interface clocks */
> -int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
> +static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy)
> {
> - struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
> int ret = 0;
>
> if (phy->is_iface_clk_enabled)
> @@ -543,20 +537,16 @@ int ufs_qcom_phy_enable_iface_clk(struct phy
> *generic_phy)
> out:
> return ret;
> }
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk);
>
> /* Turn OFF M-PHY RMMI interface clocks */
> -void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
> +void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy)
> {
> - struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
> -
> if (phy->is_iface_clk_enabled) {
> clk_disable_unprepare(phy->tx_iface_clk);
> clk_disable_unprepare(phy->rx_iface_clk);
> phy->is_iface_clk_enabled = false;
> }
> }
> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk);
>
> int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
> {
> @@ -674,13 +664,20 @@ int ufs_qcom_phy_power_on(struct phy
> *generic_phy)
> goto out_disable_phy;
> }
>
> - err = ufs_qcom_phy_enable_ref_clk(generic_phy);
> + err = ufs_qcom_phy_enable_iface_clk(phy_common);
> if (err) {
> - dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
> + dev_err(dev, "%s enable phy iface clock failed, err=%d\n",
> __func__, err);
> goto out_disable_pll;
> }
>
> + err = ufs_qcom_phy_enable_ref_clk(phy_common);
> + if (err) {
> + dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
> + __func__, err);
> + goto out_disable_iface_clk;
> + }
> +
> /* enable device PHY ref_clk pad rail */
> if (phy_common->vddp_ref_clk.reg) {
> err = ufs_qcom_phy_enable_vreg(dev,
> @@ -696,7 +693,9 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
> goto out;
>
> out_disable_ref_clk:
> - ufs_qcom_phy_disable_ref_clk(generic_phy);
> + ufs_qcom_phy_disable_ref_clk(phy_common);
> +out_disable_iface_clk:
> + ufs_qcom_phy_disable_iface_clk(phy_common);
> out_disable_pll:
> ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_pll);
> out_disable_phy:
> @@ -715,7 +714,8 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
> if (phy_common->vddp_ref_clk.reg)
> ufs_qcom_phy_disable_vreg(phy_common->dev,
> &phy_common->vddp_ref_clk);
> - ufs_qcom_phy_disable_ref_clk(generic_phy);
> + ufs_qcom_phy_disable_ref_clk(phy_common);
> + ufs_qcom_phy_disable_iface_clk(phy_common);
>
> ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll);
> ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy);
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 3aedf73..6e4ce5f 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -1112,17 +1112,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba
> *hba, bool on)
> return 0;
>
> if (on) {
> - err = ufs_qcom_phy_enable_iface_clk(host->generic_phy);
> - if (err)
> - goto out;
> -
> - err = ufs_qcom_phy_enable_ref_clk(host->generic_phy);
> - if (err) {
> - dev_err(hba->dev, "%s enable phy ref clock failed, err=%d\n",
> - __func__, err);
> - ufs_qcom_phy_disable_iface_clk(host->generic_phy);
> - goto out;
> - }
Now that you are moving these ref clk enable/disable to phy_power_on/off
and these phy_power_on/off are called only in runtime suspend/resume (3
seconds after last UFS access).
Goal is to disable the phy reference clock during aggressive gating
(10ms from last UFS access) so shouldn't we call the phy_power_on/off
from these setup_clocks() function as well?
> /* enable the device ref clock for HS mode*/
> if (ufshcd_is_hs_mode(&hba->pwr_info))
> ufs_qcom_dev_ref_clk_ctrl(host, true);
> @@ -1131,9 +1120,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba
> *hba, bool on)
> ufs_qcom_update_bus_bw_vote(host);
>
> } else {
> -
> - /* M-PHY RMMI interface clocks can be turned off */
> - ufs_qcom_phy_disable_iface_clk(host->generic_phy);
> if (!ufs_qcom_is_link_active(hba))
> /* disable device ref_clk */
> ufs_qcom_dev_ref_clk_ctrl(host, false);
> @@ -1146,7 +1132,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba
> *hba, bool on)
> dev_err(hba->dev, "%s: set bus vote failed %d\n",
> __func__, err);
>
> -out:
> return err;
> }
>
> diff --git a/include/linux/phy/phy-qcom-ufs.h
> b/include/linux/phy/phy-qcom-ufs.h
> index 9d18e9f..35c070e 100644
> --- a/include/linux/phy/phy-qcom-ufs.h
> +++ b/include/linux/phy/phy-qcom-ufs.h
> @@ -18,22 +18,6 @@
> #include "phy.h"
>
> /**
> - * ufs_qcom_phy_enable_ref_clk() - Enable the phy
> - * ref clock.
> - * @phy: reference to a generic phy
> - *
> - * returns 0 for success, and non-zero for error.
> - */
> -int ufs_qcom_phy_enable_ref_clk(struct phy *phy);
> -
> -/**
> - * ufs_qcom_phy_disable_ref_clk() - Disable the phy
> - * ref clock.
> - * @phy: reference to a generic phy.
> - */
> -void ufs_qcom_phy_disable_ref_clk(struct phy *phy);
> -
> -/**
> * ufs_qcom_phy_enable_dev_ref_clk() - Enable the device
> * ref clock.
> * @phy: reference to a generic phy.
> @@ -47,8 +31,6 @@ void ufs_qcom_phy_enable_dev_ref_clk(struct phy
> *phy);
> */
> void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
>
> -int ufs_qcom_phy_enable_iface_clk(struct phy *phy);
> -void ufs_qcom_phy_disable_iface_clk(struct phy *phy);
> int ufs_qcom_phy_start_serdes(struct phy *phy);
> int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
> int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-10-18 20:13 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-18 14:28 [PATCH v2 00/10] ufs-qcom: phy/hcd: Clean up qcom-ufs phy and ufs-qcom hcd Vivek Gautam
2016-10-18 14:28 ` [PATCH v2 01/10] phy: qcom-ufs: remove failure when rx/tx_iface_clk are absent Vivek Gautam
2016-10-18 18:38 ` Subhash Jadavani
2016-10-18 21:18 ` Stephen Boyd
2016-10-19 17:20 ` Vivek Gautam
2016-10-29 20:21 ` Vivek Gautam
2016-10-18 14:28 ` [PATCH v2 02/10] phy: qcom-ufs: Remove unnecessary BUG_ON Vivek Gautam
2016-10-18 14:28 ` [PATCH v2 03/10] phy: qcom-ufs: Use devm sibling of kstrdup for regulator names Vivek Gautam
2016-10-18 14:28 ` [PATCH v2 04/10] phy: qcom-ufs-qmp-xx: Discard remove callback for drivers Vivek Gautam
2016-10-26 20:20 ` Kishon Vijay Abraham I
2016-10-26 20:20 ` Kishon Vijay Abraham I
2016-10-29 20:16 ` Vivek Gautam
2016-10-18 14:28 ` [PATCH v2 05/10] phy: qcom-ufs: Cleanup clock and regulator initialization Vivek Gautam
2016-10-18 14:28 ` [PATCH v2 06/10] phy: qcom-ufs: Remove unnecessary function declarations Vivek Gautam
2016-10-18 18:41 ` Subhash Jadavani
2016-10-18 14:28 ` [PATCH v2 07/10] phy: qcom-ufs-qmp-xx: Move clock and regulator init out of phy init Vivek Gautam
2016-10-18 14:28 ` [PATCH 08/10] ufs-qcom: phy/hcd: Refactoring phy clock handling Vivek Gautam
2016-10-18 20:13 ` Subhash Jadavani [this message]
2016-10-19 17:45 ` Vivek Gautam
2016-10-19 19:18 ` Subhash Jadavani
2016-10-20 3:44 ` Vivek Gautam
2016-10-18 14:28 ` [PATCH v2 09/10] scsi/ufs: qcom: Add phy_exit call in hcd exit path Vivek Gautam
2016-10-18 20:19 ` Subhash Jadavani
2016-10-18 14:28 ` [PATCH v2 10/10] phy: qcom-ufs: Remove common layer phy exit callback Vivek Gautam
2016-10-19 0:07 ` Subhash Jadavani
2016-10-25 0:40 ` [PATCH v2 00/10] ufs-qcom: phy/hcd: Clean up qcom-ufs phy and ufs-qcom hcd Martin K. Petersen
2016-10-25 6:00 ` Vivek Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d105d41f88e886f20df0384569b0b688@codeaurora.org \
--to=subhashj@codeaurora.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=vinholikatti@gmail.com \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.