* Re: 2.6.11-mm3
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
@ 2005-03-12 12:20 ` Jens Axboe
2005-03-12 12:41 ` 2.6.11-mm3 Reuben Farrelly
` (12 subsequent siblings)
13 siblings, 0 replies; 58+ messages in thread
From: Jens Axboe @ 2005-03-12 12:20 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Sat, Mar 12 2005, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm3/
>
>
> - A new version of the "acpi poweroff fix". People who were having trouble
> with ACPI poweroff, please test and report.
>
> - A very large update to the CFQ I/O scheduler. Treat with caution, run
> benchmarks. Remember that the I/O scheduler can be selected on a per-disk
> basis with
>
> echo as > /sys/block/sda/queue/scheduler
echo anticipatory > /sys/block/sda/queue/scheduler
I think it's really messy that AS is 'as' in some places and
'anticipatory' elsewhere. I would suggest we rename it to 'as' all over,
it's easier to type.
> echo deadline > /sys/block/sda/queue/scheduler
> echo cfq > /sys/block/sda/queue/scheduler
--
Jens Axboe
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
2005-03-12 12:20 ` 2.6.11-mm3 Jens Axboe
@ 2005-03-12 12:41 ` Reuben Farrelly
2005-03-12 15:51 ` 2.6.11-mm3 Anton Altaparmakov
2005-03-12 13:18 ` 2.6.11-mm3: saa7134-core.c compile error Adrian Bunk
` (11 subsequent siblings)
13 siblings, 1 reply; 58+ messages in thread
From: Reuben Farrelly @ 2005-03-12 12:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
At 12:42 a.m. 13/03/2005, Andrew Morton wrote:
>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm3/
>
>
>- A new version of the "acpi poweroff fix". People who were having trouble
> with ACPI poweroff, please test and report.
>
>- A very large update to the CFQ I/O scheduler. Treat with caution, run
> benchmarks. Remember that the I/O scheduler can be selected on a per-disk
> basis with
>
> echo as > /sys/block/sda/queue/scheduler
> echo deadline > /sys/block/sda/queue/scheduler
> echo cfq > /sys/block/sda/queue/scheduler
>
>- video-for-linux update
Ugh, NTFS is br0ken:
CC [M] fs/ntfs/attrib.o
fs/ntfs/attrib.c: In function 'ntfs_attr_make_non_resident':
fs/ntfs/attrib.c:1295: warning: implicit declaration of function
'ntfs_cluster_alloc'
fs/ntfs/attrib.c:1296: error: 'DATA_ZONE' undeclared (first use in this
function)
fs/ntfs/attrib.c:1296: error: (Each undeclared identifier is reported only once
fs/ntfs/attrib.c:1296: error: for each function it appears in.)
fs/ntfs/attrib.c:1296: warning: assignment makes pointer from integer
without a cast
fs/ntfs/attrib.c:1435: warning: implicit declaration of function
'flush_dcache_mft_record_page'
fs/ntfs/attrib.c:1436: warning: implicit declaration of function
'mark_mft_record_dirty'
fs/ntfs/attrib.c:1443: warning: implicit declaration of function
'mark_page_accessed'
fs/ntfs/attrib.c:1521: warning: implicit declaration of function
'ntfs_cluster_free_from_rl'
make[2]: *** [fs/ntfs/attrib.o] Error 1
make[1]: *** [fs/ntfs] Error 2
make: *** [fs] Error 2
Compile goes through to completion fine if I back out bk-ntfs.patch.
Using gcc-4, but this problem did not exist in -mm2.
reuben
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3
2005-03-12 12:41 ` 2.6.11-mm3 Reuben Farrelly
@ 2005-03-12 15:51 ` Anton Altaparmakov
0 siblings, 0 replies; 58+ messages in thread
From: Anton Altaparmakov @ 2005-03-12 15:51 UTC (permalink / raw)
To: Reuben Farrelly; +Cc: Andrew Morton, linux-kernel
On Sun, 13 Mar 2005, Reuben Farrelly wrote:
> At 12:42 a.m. 13/03/2005, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm3/
> > - A new version of the "acpi poweroff fix". People who were having trouble
> > with ACPI poweroff, please test and report.
> >
> > - A very large update to the CFQ I/O scheduler. Treat with caution, run
> > benchmarks. Remember that the I/O scheduler can be selected on a per-disk
> > basis with
> >
> > echo as > /sys/block/sda/queue/scheduler
> > echo deadline > /sys/block/sda/queue/scheduler
> > echo cfq > /sys/block/sda/queue/scheduler
> >
> > - video-for-linux update
>
>
> Ugh, NTFS is br0ken:
Thanks for the report. All the below were already fixed in my tree except
for the mark_page_accessed() one which is now fixed (needs include
linux/swap.h).
Best regards,
Anton
> CC [M] fs/ntfs/attrib.o
> fs/ntfs/attrib.c: In function 'ntfs_attr_make_non_resident':
> fs/ntfs/attrib.c:1295: warning: implicit declaration of function
> 'ntfs_cluster_alloc'
> fs/ntfs/attrib.c:1296: error: 'DATA_ZONE' undeclared (first use in this
> function)
> fs/ntfs/attrib.c:1296: error: (Each undeclared identifier is reported only
> once
> fs/ntfs/attrib.c:1296: error: for each function it appears in.)
> fs/ntfs/attrib.c:1296: warning: assignment makes pointer from integer without
> a cast
> fs/ntfs/attrib.c:1435: warning: implicit declaration of function
> 'flush_dcache_mft_record_page'
> fs/ntfs/attrib.c:1436: warning: implicit declaration of function
> 'mark_mft_record_dirty'
> fs/ntfs/attrib.c:1443: warning: implicit declaration of function
> 'mark_page_accessed'
> fs/ntfs/attrib.c:1521: warning: implicit declaration of function
> 'ntfs_cluster_free_from_rl'
> make[2]: *** [fs/ntfs/attrib.o] Error 1
> make[1]: *** [fs/ntfs] Error 2
> make: *** [fs] Error 2
>
> Compile goes through to completion fine if I back out bk-ntfs.patch.
>
> Using gcc-4, but this problem did not exist in -mm2.
No, the relevant code didn't exist then either. I only wrote it last
week...
Best regards,
Anton
--
Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @)
Unix Support, Computing Service, University of Cambridge, CB2 3QH, UK
Linux NTFS maintainer / IRC: #ntfs on irc.freenode.net
WWW: http://linux-ntfs.sf.net/ & http://www-stu.christs.cam.ac.uk/~aia21/
^ permalink raw reply [flat|nested] 58+ messages in thread
* 2.6.11-mm3: saa7134-core.c compile error
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
2005-03-12 12:20 ` 2.6.11-mm3 Jens Axboe
2005-03-12 12:41 ` 2.6.11-mm3 Reuben Farrelly
@ 2005-03-12 13:18 ` Adrian Bunk
2005-03-15 4:38 ` Andrew Morton
2005-03-12 13:40 ` 2.6.11-mm3 Ed Tomlinson
` (10 subsequent siblings)
13 siblings, 1 reply; 58+ messages in thread
From: Adrian Bunk @ 2005-03-12 13:18 UTC (permalink / raw)
To: Andrew Morton, Gerd Knorr; +Cc: linux-kernel
On Sat, Mar 12, 2005 at 03:42:22AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.11-mm2:
>...
> +saa7134-update.patch
>...
> v4l updates
>...
This doesn't compile with CONFIG_MODULES=n:
<-- snip -->
...
CC drivers/media/video/saa7134/saa7134-core.o
drivers/media/video/saa7134/saa7134-core.c: In function `saa7134_fini':
drivers/media/video/saa7134/saa7134-core.c:1215: error: `pending_registered' undeclared (first use in this function)
drivers/media/video/saa7134/saa7134-core.c:1215: error: (Each undeclared identifier is reported only once
drivers/media/video/saa7134/saa7134-core.c:1215: error: for each function it appears in.)
drivers/media/video/saa7134/saa7134-core.c:1216: error: `pending_notifier' undeclared (first use in this function)
make[4]: *** [drivers/media/video/saa7134/saa7134-core.o] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3: saa7134-core.c compile error
2005-03-12 13:18 ` 2.6.11-mm3: saa7134-core.c compile error Adrian Bunk
@ 2005-03-15 4:38 ` Andrew Morton
2005-03-15 17:47 ` Adrian Bunk
0 siblings, 1 reply; 58+ messages in thread
From: Andrew Morton @ 2005-03-15 4:38 UTC (permalink / raw)
To: Adrian Bunk; +Cc: kraxel, linux-kernel
Adrian Bunk <bunk@stusta.de> wrote:
>
> On Sat, Mar 12, 2005 at 03:42:22AM -0800, Andrew Morton wrote:
> >...
> > Changes since 2.6.11-mm2:
> >...
> > +saa7134-update.patch
> >...
> > v4l updates
> >...
>
> This doesn't compile with CONFIG_MODULES=n:
>
> <-- snip -->
>
> ...
> CC drivers/media/video/saa7134/saa7134-core.o
> drivers/media/video/saa7134/saa7134-core.c: In function `saa7134_fini':
> drivers/media/video/saa7134/saa7134-core.c:1215: error: `pending_registered' undeclared (first use in this function)
Like this, I guess:
--- 25/drivers/media/video/saa7134/saa7134-core.c~saa7134-build-fix 2005-03-14 20:37:16.000000000 -0800
+++ 25-akpm/drivers/media/video/saa7134/saa7134-core.c 2005-03-14 20:37:27.000000000 -0800
@@ -1212,8 +1212,10 @@ static int saa7134_init(void)
static void saa7134_fini(void)
{
+#ifdef CONFIG_MODULES
if (pending_registered)
unregister_module_notifier(&pending_notifier);
+#endif
pci_unregister_driver(&saa7134_pci_driver);
}
_
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3: saa7134-core.c compile error
2005-03-15 4:38 ` Andrew Morton
@ 2005-03-15 17:47 ` Adrian Bunk
0 siblings, 0 replies; 58+ messages in thread
From: Adrian Bunk @ 2005-03-15 17:47 UTC (permalink / raw)
To: Andrew Morton; +Cc: kraxel, linux-kernel
On Mon, Mar 14, 2005 at 08:38:22PM -0800, Andrew Morton wrote:
> Adrian Bunk <bunk@stusta.de> wrote:
> >
> > This doesn't compile with CONFIG_MODULES=n:
> >
> > <-- snip -->
> >
> > ...
> > CC drivers/media/video/saa7134/saa7134-core.o
> > drivers/media/video/saa7134/saa7134-core.c: In function `saa7134_fini':
> > drivers/media/video/saa7134/saa7134-core.c:1215: error: `pending_registered' undeclared (first use in this function)
>
> Like this, I guess:
This fixes the compilation for me.
> --- 25/drivers/media/video/saa7134/saa7134-core.c~saa7134-build-fix 2005-03-14 20:37:16.000000000 -0800
> +++ 25-akpm/drivers/media/video/saa7134/saa7134-core.c 2005-03-14 20:37:27.000000000 -0800
> @@ -1212,8 +1212,10 @@ static int saa7134_init(void)
>
> static void saa7134_fini(void)
> {
> +#ifdef CONFIG_MODULES
> if (pending_registered)
> unregister_module_notifier(&pending_notifier);
> +#endif
> pci_unregister_driver(&saa7134_pci_driver);
> }
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (2 preceding siblings ...)
2005-03-12 13:18 ` 2.6.11-mm3: saa7134-core.c compile error Adrian Bunk
@ 2005-03-12 13:40 ` Ed Tomlinson
2005-03-12 15:52 ` 2.6.11-mm3 Anton Altaparmakov
2005-03-12 15:55 ` [2.6 patch] drivers/net/sis900.c: fix a warning Adrian Bunk
` (9 subsequent siblings)
13 siblings, 1 reply; 58+ messages in thread
From: Ed Tomlinson @ 2005-03-12 13:40 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Saturday 12 March 2005 06:42, Andrew Morton wrote:
> 2.6.11-mm3
> From: Andrew Morton <akpm@osdl.org>
> To: linux-kernel@vger.kernel.org
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm3/
>
>
> - A new version of the "acpi poweroff fix". People who were having trouble
> with ACPI poweroff, please test and report.
>
> - A very large update to the CFQ I/O scheduler. Treat with caution, run
> benchmarks. Remember that the I/O scheduler can be selected on a per-disk
> basis with
>
> echo as > /sys/block/sda/queue/scheduler
> echo deadline > /sys/block/sda/queue/scheduler
> echo cfq > /sys/block/sda/queue/scheduler
>
> - video-for-linux update
Building with an -mm1 oldconfiged on x86-64 arch I get:
LD fs/ntfs/built-in.o
CC [M] fs/ntfs/aops.o
CC [M] fs/ntfs/attrib.o
fs/ntfs/attrib.c: In function `ntfs_attr_make_non_resident':
fs/ntfs/attrib.c:1295: warning: implicit declaration of function `ntfs_cluster_alloc'
fs/ntfs/attrib.c:1296: error: `DATA_ZONE' undeclared (first use in this function)
fs/ntfs/attrib.c:1296: error: (Each undeclared identifier is reported only once
fs/ntfs/attrib.c:1296: error: for each function it appears in.)
fs/ntfs/attrib.c:1296: warning: assignment makes pointer from integer without a cast
fs/ntfs/attrib.c:1435: warning: implicit declaration of function `flush_dcache_mft_record_page'
fs/ntfs/attrib.c:1436: warning: implicit declaration of function `mark_mft_record_dirty'
fs/ntfs/attrib.c:1443: warning: implicit declaration of function `mark_page_accessed'
fs/ntfs/attrib.c:1521: warning: implicit declaration of function `ntfs_cluster_free_from_rl'
make[2]: *** [fs/ntfs/attrib.o] Error 1
make[1]: *** [fs/ntfs] Error 2
make: *** [fs] Error 2
Ed Tomlinson
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3
2005-03-12 13:40 ` 2.6.11-mm3 Ed Tomlinson
@ 2005-03-12 15:52 ` Anton Altaparmakov
0 siblings, 0 replies; 58+ messages in thread
From: Anton Altaparmakov @ 2005-03-12 15:52 UTC (permalink / raw)
To: Ed Tomlinson; +Cc: Andrew Morton, linux-kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 2391 bytes --]
On Sat, 12 Mar 2005, Ed Tomlinson wrote:
> On Saturday 12 March 2005 06:42, Andrew Morton wrote:
> > 2.6.11-mm3
> > From: Andrew Morton <akpm@osdl.org>
> > To: linux-kernel@vger.kernel.org
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm3/
> >
> > - A new version of the "acpi poweroff fix". People who were having trouble
> > with ACPI poweroff, please test and report.
> >
> > - A very large update to the CFQ I/O scheduler. Treat with caution, run
> > benchmarks. Remember that the I/O scheduler can be selected on a per-disk
> > basis with
> >
> > echo as > /sys/block/sda/queue/scheduler
> > echo deadline > /sys/block/sda/queue/scheduler
> > echo cfq > /sys/block/sda/queue/scheduler
> >
> > - video-for-linux update
>
> Building with an -mm1 oldconfiged on x86-64 arch I get:
>
> LD fs/ntfs/built-in.o
> CC [M] fs/ntfs/aops.o
> CC [M] fs/ntfs/attrib.o
> fs/ntfs/attrib.c: In function `ntfs_attr_make_non_resident':
> fs/ntfs/attrib.c:1295: warning: implicit declaration of function `ntfs_cluster_alloc'
> fs/ntfs/attrib.c:1296: error: `DATA_ZONE' undeclared (first use in this function)
> fs/ntfs/attrib.c:1296: error: (Each undeclared identifier is reported only once
> fs/ntfs/attrib.c:1296: error: for each function it appears in.)
> fs/ntfs/attrib.c:1296: warning: assignment makes pointer from integer without a cast
> fs/ntfs/attrib.c:1435: warning: implicit declaration of function `flush_dcache_mft_record_page'
> fs/ntfs/attrib.c:1436: warning: implicit declaration of function `mark_mft_record_dirty'
> fs/ntfs/attrib.c:1443: warning: implicit declaration of function `mark_page_accessed'
> fs/ntfs/attrib.c:1521: warning: implicit declaration of function `ntfs_cluster_free_from_rl'
> make[2]: *** [fs/ntfs/attrib.o] Error 1
> make[1]: *** [fs/ntfs] Error 2
> make: *** [fs] Error 2
Thanks for the report. All the above were already fixed in my tree except
for the mark_page_accessed() one which is now fixed (needs include
linux/swap.h).
Best regards,
Anton
--
Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @)
Unix Support, Computing Service, University of Cambridge, CB2 3QH, UK
Linux NTFS maintainer / IRC: #ntfs on irc.freenode.net
WWW: http://linux-ntfs.sf.net/ & http://www-stu.christs.cam.ac.uk/~aia21/
^ permalink raw reply [flat|nested] 58+ messages in thread
* [2.6 patch] drivers/net/sis900.c: fix a warning
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (3 preceding siblings ...)
2005-03-12 13:40 ` 2.6.11-mm3 Ed Tomlinson
@ 2005-03-12 15:55 ` Adrian Bunk
2005-03-12 17:30 ` Adrian Bunk
` (8 subsequent siblings)
13 siblings, 0 replies; 58+ messages in thread
From: Adrian Bunk @ 2005-03-12 15:55 UTC (permalink / raw)
To: Andrew Morton, venza; +Cc: linux-kernel, jgarzik, linux-net
This patch fixes the following warning, that comes from Linus' tree #if
CONFIG_NET_POLL_CONTROLLER=n:
<-- snip -->
...
CC drivers/net/sis900.o
drivers/net/sis900.c:199: warning: 'sis900_poll' declared `static' but never defined
...
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.11-mm3/drivers/net/sis900.c.old 2005-03-12 15:55:31.000000000 +0100
+++ linux-2.6.11-mm3/drivers/net/sis900.c 2005-03-12 15:55:53.000000000 +0100
@@ -196,7 +196,9 @@
MODULE_PARM_DESC(max_interrupt_work, "SiS 900/7016 maximum events handled per interrupt");
MODULE_PARM_DESC(sis900_debug, "SiS 900/7016 bitmapped debugging message level");
+#ifdef CONFIG_NET_POLL_CONTROLLER
static void sis900_poll(struct net_device *dev);
+#endif
static int sis900_open(struct net_device *net_dev);
static int sis900_mii_probe (struct net_device * net_dev);
static void sis900_init_rxfilter (struct net_device * net_dev);
^ permalink raw reply [flat|nested] 58+ messages in thread* [2.6 patch] drivers/video/intelfb/: fix a warning
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
@ 2005-03-12 17:30 ` Adrian Bunk
2005-03-12 12:41 ` 2.6.11-mm3 Reuben Farrelly
` (12 subsequent siblings)
13 siblings, 0 replies; 58+ messages in thread
From: Adrian Bunk @ 2005-03-12 17:30 UTC (permalink / raw)
To: Andrew Morton, adaplas; +Cc: linux-kernel, linux-fbdev-devel
It seems I'm at least partially guilty for the following warning coming
from Linus' tree:
<-- snip -->
...
CC [M] drivers/video/intelfb/intelfbdrv.o
drivers/video/intelfb/intelfbdrv.h:31: warning: 'intelfb_setup' declared `static' but never defined
...
<-- snip -->
The fix is simple.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.11-mm3-full/drivers/video/intelfb/intelfbdrv.h.old 2005-03-12 17:51:06.000000000 +0100
+++ linux-2.6.11-mm3-full/drivers/video/intelfb/intelfbdrv.h 2005-03-12 17:51:20.000000000 +0100
@@ -28,7 +28,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-static int __init intelfb_setup(char *options);
static void __devinit get_initial_mode(struct intelfb_info *dinfo);
static void update_dinfo(struct intelfb_info *dinfo,
struct fb_var_screeninfo *var);
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 58+ messages in thread* [2.6 patch] drivers/video/intelfb/: fix a warning
@ 2005-03-12 17:30 ` Adrian Bunk
0 siblings, 0 replies; 58+ messages in thread
From: Adrian Bunk @ 2005-03-12 17:30 UTC (permalink / raw)
To: Andrew Morton, adaplas; +Cc: linux-kernel, linux-fbdev-devel
It seems I'm at least partially guilty for the following warning coming
from Linus' tree:
<-- snip -->
...
CC [M] drivers/video/intelfb/intelfbdrv.o
drivers/video/intelfb/intelfbdrv.h:31: warning: 'intelfb_setup' declared `static' but never defined
...
<-- snip -->
The fix is simple.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.11-mm3-full/drivers/video/intelfb/intelfbdrv.h.old 2005-03-12 17:51:06.000000000 +0100
+++ linux-2.6.11-mm3-full/drivers/video/intelfb/intelfbdrv.h 2005-03-12 17:51:20.000000000 +0100
@@ -28,7 +28,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-static int __init intelfb_setup(char *options);
static void __devinit get_initial_mode(struct intelfb_info *dinfo);
static void update_dinfo(struct intelfb_info *dinfo,
struct fb_var_screeninfo *var);
^ permalink raw reply [flat|nested] 58+ messages in thread
* DRI breakage, 2.6.11-mm[123]
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (5 preceding siblings ...)
2005-03-12 17:30 ` Adrian Bunk
@ 2005-03-12 19:13 ` Sean Neakums
2005-03-12 19:29 ` Sean Neakums
2005-03-13 12:01 ` 2.6.11-mm3: machine check on sleep, PowerBook5.4 Sean Neakums
` (6 subsequent siblings)
13 siblings, 1 reply; 58+ messages in thread
From: Sean Neakums @ 2005-03-12 19:13 UTC (permalink / raw)
To: Andrew Morton; +Cc: Dave Airlie, linux-kernel
The following happens with 2.6.11-mm[123]. (I didn't have time to
investigate earlier; sorry.) It does not happen with 2.6.11-rc3-mm2
and 2.6.11. I have tested 2.6.11-mm3 with dri disabled (by not
loading X's dri module) and it also does not happen then.
When I start X, I get a screen full of what looks like random pixels.
Apart from the pointer, X seems generally non-functional. The X
server (Debian's 4.3.0.dfsg.1-1) is spinning doing the following,
apparently indefinitely (fd 5 is /dev/dri/card0):
ioctl(5, 0x6444, 0) = -1 EBUSY (Device or resource busy)
ioctl(5, 0x6444, 0) = -1 EBUSY (Device or resource busy)
--- SIGALRM (Alarm clock) @ 0 (0) ---
sigreturn() = ? (mask now [])
ioctl(5, 0x6444, 0) = -1 EBUSY (Device or resource busy)
--- SIGALRM (Alarm clock) @ 0 (0) ---
sigreturn() = ? (mask now [])
ioctl(5, 0x6444, 0) = -1 EBUSY (Device or resource busy)
ioctl(5, 0x6444, 0) = -1 EBUSY (Device or resource busy)
--- SIGALRM (Alarm clock) @ 0 (0) ---
sigreturn() = ? (mask now [])
ioctl(5, 0x6444, 0) = -1 EBUSY (Device or resource busy)
Kernel configuration at http://flynn.zork.net/~sneakums/config-2.6.11-mm3
--
Dag vijandelijk luchtschip de huismeester is dood
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: DRI breakage, 2.6.11-mm[123]
2005-03-12 19:13 ` DRI breakage, 2.6.11-mm[123] Sean Neakums
@ 2005-03-12 19:29 ` Sean Neakums
2005-03-12 23:13 ` Dave Airlie
0 siblings, 1 reply; 58+ messages in thread
From: Sean Neakums @ 2005-03-12 19:29 UTC (permalink / raw)
To: Andrew Morton; +Cc: Dave Airlie, linux-kernel
Sean Neakums <sneakums@zork.net> writes:
> The following happens with 2.6.11-mm[123]. (I didn't have time to
> investigate earlier; sorry.) It does not happen with 2.6.11-rc3-mm2
> and 2.6.11. I have tested 2.6.11-mm3 with dri disabled (by not
> loading X's dri module) and it also does not happen then.
Also happens on 2.6.11-mm3 with bk-drm.patch reverted.
To expand on my crappy report, the graphics card is a Radeon 9200:
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)
--
Dag vijandelijk luchtschip de huismeester is dood
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: DRI breakage, 2.6.11-mm[123]
2005-03-12 19:29 ` Sean Neakums
@ 2005-03-12 23:13 ` Dave Airlie
2005-03-12 23:58 ` Dave Jones
0 siblings, 1 reply; 58+ messages in thread
From: Dave Airlie @ 2005-03-12 23:13 UTC (permalink / raw)
To: Andrew Morton, Dave Airlie, linux-kernel
On Sat, 12 Mar 2005 19:29:20 +0000, Sean Neakums <sneakums@zork.net> wrote:
> Sean Neakums <sneakums@zork.net> writes:
>
> > The following happens with 2.6.11-mm[123]. (I didn't have time to
> > investigate earlier; sorry.) It does not happen with 2.6.11-rc3-mm2
> > and 2.6.11. I have tested 2.6.11-mm3 with dri disabled (by not
> > loading X's dri module) and it also does not happen then.
>
> Also happens on 2.6.11-mm3 with bk-drm.patch reverted.
>
> To expand on my crappy report, the graphics card is a Radeon 9200:
Wierd the -mm tree has currently very few drm changes over the non-mm
tree and if reverting bk-drm doesn't help it sounds like something in
the generic ioctl code may be gone wrong...
Can you try a 2.6.12-bk snapshot.. it may be the multi-head patches
are buggy....
Dave.
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: DRI breakage, 2.6.11-mm[123]
2005-03-12 23:13 ` Dave Airlie
@ 2005-03-12 23:58 ` Dave Jones
2005-03-13 12:48 ` Sean Neakums
0 siblings, 1 reply; 58+ messages in thread
From: Dave Jones @ 2005-03-12 23:58 UTC (permalink / raw)
To: Dave Airlie; +Cc: Andrew Morton, linux-kernel
On Sun, Mar 13, 2005 at 10:13:49AM +1100, Dave Airlie wrote:
> On Sat, 12 Mar 2005 19:29:20 +0000, Sean Neakums <sneakums@zork.net> wrote:
> > Sean Neakums <sneakums@zork.net> writes:
> >
> > > The following happens with 2.6.11-mm[123]. (I didn't have time to
> > > investigate earlier; sorry.) It does not happen with 2.6.11-rc3-mm2
> > > and 2.6.11. I have tested 2.6.11-mm3 with dri disabled (by not
> > > loading X's dri module) and it also does not happen then.
> >
> > Also happens on 2.6.11-mm3 with bk-drm.patch reverted.
> >
> > To expand on my crappy report, the graphics card is a Radeon 9200:
>
> Wierd the -mm tree has currently very few drm changes over the non-mm
> tree and if reverting bk-drm doesn't help it sounds like something in
> the generic ioctl code may be gone wrong...
>
> Can you try a 2.6.12-bk snapshot.. it may be the multi-head patches
> are buggy....
Could be. Given the other agp problems didn't get spotted in -mm
my confidence in those patches has dropped off somewhat in the
last few days.
Hopefully it's something simple.
Dave
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: DRI breakage, 2.6.11-mm[123]
2005-03-12 23:58 ` Dave Jones
@ 2005-03-13 12:48 ` Sean Neakums
2005-03-13 13:34 ` Dave Airlie
0 siblings, 1 reply; 58+ messages in thread
From: Sean Neakums @ 2005-03-13 12:48 UTC (permalink / raw)
To: Dave Jones; +Cc: Dave Airlie, Andrew Morton, linux-kernel
Dave Jones <davej@redhat.com> writes:
> On Sun, Mar 13, 2005 at 10:13:49AM +1100, Dave Airlie wrote:
> > On Sat, 12 Mar 2005 19:29:20 +0000, Sean Neakums <sneakums@zork.net> wrote:
> > > Sean Neakums <sneakums@zork.net> writes:
> > >
> > > > The following happens with 2.6.11-mm[123]. (I didn't have time to
> > > > investigate earlier; sorry.) It does not happen with 2.6.11-rc3-mm2
> > > > and 2.6.11. I have tested 2.6.11-mm3 with dri disabled (by not
> > > > loading X's dri module) and it also does not happen then.
> > >
> > > Also happens on 2.6.11-mm3 with bk-drm.patch reverted.
> > >
> > > To expand on my crappy report, the graphics card is a Radeon 9200:
> >
> > Wierd the -mm tree has currently very few drm changes over the non-mm
> > tree and if reverting bk-drm doesn't help it sounds like something in
> > the generic ioctl code may be gone wrong...
> >
> > Can you try a 2.6.12-bk snapshot.. it may be the multi-head patches
> > are buggy....
>
> Could be. Given the other agp problems didn't get spotted in -mm
> my confidence in those patches has dropped off somewhat in the
> last few days.
>
> Hopefully it's something simple.
Same symptoms with 2.6.11-bk8.
--
Dag vijandelijk luchtschip de huismeester is dood
^ permalink raw reply [flat|nested] 58+ messages in thread
* 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (6 preceding siblings ...)
2005-03-12 19:13 ` DRI breakage, 2.6.11-mm[123] Sean Neakums
@ 2005-03-13 12:01 ` Sean Neakums
2005-03-13 12:23 ` Benjamin Herrenschmidt
2005-03-13 12:30 ` Benjamin Herrenschmidt
2005-03-13 16:31 ` 2.6.11-mm3 Barry K. Nathan
` (5 subsequent siblings)
13 siblings, 2 replies; 58+ messages in thread
From: Sean Neakums @ 2005-03-13 12:01 UTC (permalink / raw)
To: Andrew Morton; +Cc: benh, linux-kernel
Machine check in kernel mode.
Caused by (from SRR1=149030): Transfer error ack signal
Oops: machine check, sig: 7 [#1]
TASK = etc. 'pmud' etc.
(for registers and such, see:
http://flynn.zork.net/~sneakums/pmac-machine-check-on-sleep-2611mm3.jpeg )
Call trace:
pmac_ide_pci_suspend
pci_device_suspend
suspend_device
device_suspend
0xc03dd894
0xc03dddb8
0xc03de7cc
do_ioctl
vfs_ioctl
sys_ioctl
ret_from_syscall
--
Dag vijandelijk luchtschip de huismeester is dood
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 12:01 ` 2.6.11-mm3: machine check on sleep, PowerBook5.4 Sean Neakums
@ 2005-03-13 12:23 ` Benjamin Herrenschmidt
2005-03-13 12:30 ` Benjamin Herrenschmidt
1 sibling, 0 replies; 58+ messages in thread
From: Benjamin Herrenschmidt @ 2005-03-13 12:23 UTC (permalink / raw)
To: Sean Neakums; +Cc: Andrew Morton, Linux Kernel list
On Sun, 2005-03-13 at 12:01 +0000, Sean Neakums wrote:
> Machine check in kernel mode.
> Caused by (from SRR1=149030): Transfer error ack signal
> Oops: machine check, sig: 7 [#1]
> TASK = etc. 'pmud' etc.
> (for registers and such, see:
> http://flynn.zork.net/~sneakums/pmac-machine-check-on-sleep-2611mm3.jpeg )
> Call trace:
> pmac_ide_pci_suspend
> pci_device_suspend
> suspend_device
> device_suspend
> 0xc03dd894
> 0xc03dddb8
> 0xc03de7cc
> do_ioctl
> vfs_ioctl
> sys_ioctl
> ret_from_syscall
Thanks, I'll investigate.
Ben.
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 12:01 ` 2.6.11-mm3: machine check on sleep, PowerBook5.4 Sean Neakums
2005-03-13 12:23 ` Benjamin Herrenschmidt
@ 2005-03-13 12:30 ` Benjamin Herrenschmidt
2005-03-13 12:35 ` Benjamin Herrenschmidt
1 sibling, 1 reply; 58+ messages in thread
From: Benjamin Herrenschmidt @ 2005-03-13 12:30 UTC (permalink / raw)
To: Sean Neakums; +Cc: Andrew Morton, Linux Kernel list
On Sun, 2005-03-13 at 12:01 +0000, Sean Neakums wrote:
> Machine check in kernel mode.
> Caused by (from SRR1=149030): Transfer error ack signal
> Oops: machine check, sig: 7 [#1]
> TASK = etc. 'pmud' etc.
> (for registers and such, see:
> http://flynn.zork.net/~sneakums/pmac-machine-check-on-sleep-2611mm3.jpeg )
> Call trace:
> pmac_ide_pci_suspend
> pci_device_suspend
> suspend_device
> device_suspend
> 0xc03dd894
> 0xc03dddb8
> 0xc03de7cc
> do_ioctl
> vfs_ioctl
> sys_ioctl
> ret_from_syscall
Does that fix it ?
Index: linux-work/drivers/ide/ppc/pmac.c
===================================================================
--- linux-work.orig/drivers/ide/ppc/pmac.c 2005-03-13 10:10:58.000000000 +1100
+++ linux-work/drivers/ide/ppc/pmac.c 2005-03-13 23:29:40.000000000 +1100
@@ -1208,16 +1208,17 @@
if (pmif->mediabay)
return 0;
- /* Disable the bus */
- ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 0);
-
- /* Kauai has it different */
+ /* Kauai has bus control FCRs directly here */
if (pmif->kauai_fcr) {
u32 fcr = readl(pmif->kauai_fcr);
fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
writel(fcr, pmif->kauai_fcr);
}
+ /* Disable the bus on older machines and the cell on kauai */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id,
+ 0);
+
return 0;
}
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 12:30 ` Benjamin Herrenschmidt
@ 2005-03-13 12:35 ` Benjamin Herrenschmidt
2005-03-13 16:19 ` Sean Neakums
0 siblings, 1 reply; 58+ messages in thread
From: Benjamin Herrenschmidt @ 2005-03-13 12:35 UTC (permalink / raw)
To: Sean Neakums; +Cc: Andrew Morton, Linux Kernel list
On Sun, 2005-03-13 at 23:30 +1100, Benjamin Herrenschmidt wrote:
> On Sun, 2005-03-13 at 12:01 +0000, Sean Neakums wrote:
> > Machine check in kernel mode.
> > Caused by (from SRR1=149030): Transfer error ack signal
> > Oops: machine check, sig: 7 [#1]
> > TASK = etc. 'pmud' etc.
> > (for registers and such, see:
> > http://flynn.zork.net/~sneakums/pmac-machine-check-on-sleep-2611mm3.jpeg )
> > Call trace:
> > pmac_ide_pci_suspend
> > pci_device_suspend
> > suspend_device
> > device_suspend
> > 0xc03dd894
> > 0xc03dddb8
> > 0xc03de7cc
> > do_ioctl
> > vfs_ioctl
> > sys_ioctl
> > ret_from_syscall
>
> Does that fix it ?
Oh, and eventually this one too. Closer to what darwin does: doesn't
disable the ATA/100 cell during sleep. Let me know with both of the
patches. Best would even be if you could figure out which one gives the
best power consumption during sleep in fact (if it makes any noticeable
difference).
Index: linux-work/drivers/ide/ppc/pmac.c
===================================================================
--- linux-work.orig/drivers/ide/ppc/pmac.c 2005-03-13 10:10:58.000000000 +1100
+++ linux-work/drivers/ide/ppc/pmac.c 2005-03-13 23:29:40.000000000 +1100
@@ -1208,16 +1208,17 @@
if (pmif->mediabay)
return 0;
- /* Disable the bus */
- ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 0);
-
- /* Kauai has it different */
+ /* Kauai has bus control FCRs directly here */
if (pmif->kauai_fcr) {
u32 fcr = readl(pmif->kauai_fcr);
fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
writel(fcr, pmif->kauai_fcr);
}
+ /* Disable the bus on older machines and the cell on kauai */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id,
+ 0);
+
return 0;
}
Index: linux-work/arch/ppc/platforms/pmac_feature.c
===================================================================
--- linux-work.orig/arch/ppc/platforms/pmac_feature.c 2005-03-13 18:23:11.000000000 +1100
+++ linux-work/arch/ppc/platforms/pmac_feature.c 2005-03-13 23:34:18.000000000 +1100
@@ -830,6 +830,7 @@
return 0;
}
+#if 0
static long __pmac
core99_ata100_enable(struct device_node* node, long value)
{
@@ -859,6 +860,7 @@
}
return 0;
}
+#endif
static long __pmac
core99_ide_enable(struct device_node* node, long param, long value)
@@ -876,8 +878,10 @@
case 2:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
+#if 0
case 3:
return core99_ata100_enable(node, value);
+#endif
default:
return -ENODEV;
}
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 12:35 ` Benjamin Herrenschmidt
@ 2005-03-13 16:19 ` Sean Neakums
2005-03-13 19:07 ` Sean Neakums
2005-03-13 21:47 ` Benjamin Herrenschmidt
0 siblings, 2 replies; 58+ messages in thread
From: Sean Neakums @ 2005-03-13 16:19 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: Andrew Morton, Linux Kernel list
Both patches give me a successful sleep, although I had to alter the
second to not #if 0 core99_ata100_enable -- there's another call to
that function in pmac_feature.c's set_initial_features().
I will try to gather some power numbers.
--
Dag vijandelijk luchtschip de huismeester is dood
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 16:19 ` Sean Neakums
@ 2005-03-13 19:07 ` Sean Neakums
2005-03-13 21:53 ` Benjamin Herrenschmidt
2005-03-13 21:47 ` Benjamin Herrenschmidt
1 sibling, 1 reply; 58+ messages in thread
From: Sean Neakums @ 2005-03-13 19:07 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: Andrew Morton, Linux Kernel list
Sean Neakums <sneakums@zork.net> writes:
> Both patches give me a successful sleep, although I had to alter the
> second to not #if 0 core99_ata100_enable -- there's another call to
> that function in pmac_feature.c's set_initial_features().
>
> I will try to gather some power numbers.
With the first patch, charge dropped by 33 over 52 minutes, 0.64/min.
With the second patch, charge dropped by 65 over 80 minutes, 0.81/min.
--
Dag vijandelijk luchtschip de huismeester is dood
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 19:07 ` Sean Neakums
@ 2005-03-13 21:53 ` Benjamin Herrenschmidt
2005-03-13 22:08 ` Sean Neakums
0 siblings, 1 reply; 58+ messages in thread
From: Benjamin Herrenschmidt @ 2005-03-13 21:53 UTC (permalink / raw)
To: Sean Neakums; +Cc: Andrew Morton, Linux Kernel list
On Sun, 2005-03-13 at 19:07 +0000, Sean Neakums wrote:
> Sean Neakums <sneakums@zork.net> writes:
>
> > Both patches give me a successful sleep, although I had to alter the
> > second to not #if 0 core99_ata100_enable -- there's another call to
> > that function in pmac_feature.c's set_initial_features().
> >
> > I will try to gather some power numbers.
>
> With the first patch, charge dropped by 33 over 52 minutes, 0.64/min.
> With the second patch, charge dropped by 65 over 80 minutes, 0.81/min.
Hi ! With the same initial charge ? The problem is that the drop isn't
really linear... Anyway, thanks for testing, so it would _seem_ that the
Darwin way isn't as efficient as what I did ;)
Ben.
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 21:53 ` Benjamin Herrenschmidt
@ 2005-03-13 22:08 ` Sean Neakums
2005-03-13 22:10 ` Benjamin Herrenschmidt
2005-03-13 22:12 ` Benjamin Herrenschmidt
0 siblings, 2 replies; 58+ messages in thread
From: Sean Neakums @ 2005-03-13 22:08 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: Andrew Morton, Linux Kernel list
Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:
> On Sun, 2005-03-13 at 19:07 +0000, Sean Neakums wrote:
>> Sean Neakums <sneakums@zork.net> writes:
>>
>> > Both patches give me a successful sleep, although I had to alter the
>> > second to not #if 0 core99_ata100_enable -- there's another call to
>> > that function in pmac_feature.c's set_initial_features().
>> >
>> > I will try to gather some power numbers.
>>
>> With the first patch, charge dropped by 33 over 52 minutes, 0.64/min.
>> With the second patch, charge dropped by 65 over 80 minutes, 0.81/min.
>
> Hi ! With the same initial charge ? The problem is that the drop isn't
> really linear...
Oh, fiddlesticks, that didn't occur to me. I can redo with overnight
sleeps on a full charge, if you like.
--
Dag vijandelijk luchtschip de huismeester is dood
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 22:08 ` Sean Neakums
@ 2005-03-13 22:10 ` Benjamin Herrenschmidt
2005-03-13 22:12 ` Benjamin Herrenschmidt
1 sibling, 0 replies; 58+ messages in thread
From: Benjamin Herrenschmidt @ 2005-03-13 22:10 UTC (permalink / raw)
To: Sean Neakums; +Cc: Andrew Morton, Linux Kernel list
On Sun, 2005-03-13 at 22:08 +0000, Sean Neakums wrote:
> Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:
>
> > On Sun, 2005-03-13 at 19:07 +0000, Sean Neakums wrote:
> >> Sean Neakums <sneakums@zork.net> writes:
> >>
> >> > Both patches give me a successful sleep, although I had to alter the
> >> > second to not #if 0 core99_ata100_enable -- there's another call to
> >> > that function in pmac_feature.c's set_initial_features().
> >> >
> >> > I will try to gather some power numbers.
> >>
> >> With the first patch, charge dropped by 33 over 52 minutes, 0.64/min.
> >> With the second patch, charge dropped by 65 over 80 minutes, 0.81/min.
> >
> > Hi ! With the same initial charge ? The problem is that the drop isn't
> > really linear...
>
> Oh, fiddlesticks, that didn't occur to me. I can redo with overnight
> sleeps on a full charge, if you like.
Yes, I would appreciate, thanks.
Ben.
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 22:08 ` Sean Neakums
2005-03-13 22:10 ` Benjamin Herrenschmidt
@ 2005-03-13 22:12 ` Benjamin Herrenschmidt
1 sibling, 0 replies; 58+ messages in thread
From: Benjamin Herrenschmidt @ 2005-03-13 22:12 UTC (permalink / raw)
To: Andrew Morton; +Cc: Linux Kernel list, Sean Neakums
> Oh, fiddlesticks, that didn't occur to me. I can redo with overnight
> sleeps on a full charge, if you like.
In the meantime, Andrew, please submit this one to Linus, I'll update
the stuff if it happens the other one gives better power consumptions:
--
This patch fixes a logic error in the ide-pmac driver which could try to
access the chip's fcr register after the cell clock has been shut down,
thus causing a machine check on machines with the "Intrepid" chipset.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Index: linux-work/drivers/ide/ppc/pmac.c
===================================================================
--- linux-work.orig/drivers/ide/ppc/pmac.c 2005-03-13 10:10:58.000000000 +1100
+++ linux-work/drivers/ide/ppc/pmac.c 2005-03-13 23:29:40.000000000 +1100
@@ -1208,16 +1208,17 @@
if (pmif->mediabay)
return 0;
- /* Disable the bus */
- ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 0);
-
- /* Kauai has it different */
+ /* Kauai has bus control FCRs directly here */
if (pmif->kauai_fcr) {
u32 fcr = readl(pmif->kauai_fcr);
fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
writel(fcr, pmif->kauai_fcr);
}
+ /* Disable the bus on older machines and the cell on kauai */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id,
+ 0);
+
return 0;
}
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3: machine check on sleep, PowerBook5.4
2005-03-13 16:19 ` Sean Neakums
2005-03-13 19:07 ` Sean Neakums
@ 2005-03-13 21:47 ` Benjamin Herrenschmidt
1 sibling, 0 replies; 58+ messages in thread
From: Benjamin Herrenschmidt @ 2005-03-13 21:47 UTC (permalink / raw)
To: Sean Neakums; +Cc: Andrew Morton, Linux Kernel list
On Sun, 2005-03-13 at 16:19 +0000, Sean Neakums wrote:
> Both patches give me a successful sleep, although I had to alter the
> second to not #if 0 core99_ata100_enable -- there's another call to
> that function in pmac_feature.c's set_initial_features().
>
> I will try to gather some power numbers.
Thanks.
Ben.
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (7 preceding siblings ...)
2005-03-13 12:01 ` 2.6.11-mm3: machine check on sleep, PowerBook5.4 Sean Neakums
@ 2005-03-13 16:31 ` Barry K. Nathan
2005-03-14 16:25 ` 2.6.11-mm3 (compile stats) John Cherry
` (4 subsequent siblings)
13 siblings, 0 replies; 58+ messages in thread
From: Barry K. Nathan @ 2005-03-13 16:31 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Sat, Mar 12, 2005 at 03:42:22AM -0800, Andrew Morton wrote:
> - A new version of the "acpi poweroff fix". People who were having trouble
> with ACPI poweroff, please test and report.
I've tested this set of ACPI poweroff patches with both clean, proper
shutdowns and Alt-SysRq-O, on hardware that previously didn't work. Now it
works.
-Barry K. Nathan <barryn@pobox.com>
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3 (compile stats)
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (8 preceding siblings ...)
2005-03-13 16:31 ` 2.6.11-mm3 Barry K. Nathan
@ 2005-03-14 16:25 ` John Cherry
2005-03-14 21:54 ` 2.6.11-mm3 - DRM/i915 broken Brice Goglin
` (3 subsequent siblings)
13 siblings, 0 replies; 58+ messages in thread
From: John Cherry @ 2005-03-14 16:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel@vger.kernel.org
Compile Statistics
------------------
Build Tree: mm
Compiler: gcc 3.4.1
Detailed results: http://developer.osdl.org/cherry/compile/
Summary - 2.6.11-mm2 to 2.6.11-mm3
----------------------------------
Defconfig (bzImage): -2 warnings
Allnoconfig (bzImage): no change
Allyesconfig (bzImage): +54 warnings
Allyesconfig (modules): no change
Allmodconfig (bzImage): no change
Allmodconfig (modules: +52 warnings
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
<pointless and stupid compiler numbers omitted for your convenience.
See link above if interested in the detailed compile information.>
:)
John
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3 - DRM/i915 broken
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (9 preceding siblings ...)
2005-03-14 16:25 ` 2.6.11-mm3 (compile stats) John Cherry
@ 2005-03-14 21:54 ` Brice Goglin
2005-03-14 22:30 ` Bernhard Rosenkraenzer
2005-03-15 7:57 ` 2.6.11-mm3 Stefano Rivoir
` (2 subsequent siblings)
13 siblings, 1 reply; 58+ messages in thread
From: Brice Goglin @ 2005-03-14 21:54 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1001 bytes --]
Andrew Morton a écrit :
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11/2.6.11-mm3/
Hi Andrew,
DRM/i915 does not work on my Dell Dimension 3000 (i865 chipset).
It's the first -mm kernel I try on this box. I don't whether previous -mm worked or not.
Anyway, 2.6.11 works great.
If I pass debug=1 to the drm module and then start Xorg (which loads i915), I get :
[drm] Initialized drm 1.0.0 20040925
[drm:drm_stub_open]
[drm:drm_stub_open]
[drm:drm_stub_open]
[drm:drm_stub_open]
[drm:drm_init]
[drm:drm_get_dev]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 185
[drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.
[drm:drm_takedown]
DRM: Fill_in_dev failed.
[drm:drm_stub_open]
[drm:drm_stub_open]
[drm:drm_stub_open]
...
Reverting the bk-drm.patch does NOT fix it.
I did not find any interesting candidate in the broken-out directory.
Let me know if you want me to test something.
config, dmesg & lspci attached.
Regards,
Brice Goglin
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 33106 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-mm3
# Mon Mar 14 21:15:09 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION="=Pignouf"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PC-card bridges
#
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_ISCSI_IF is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_TOS is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
# CONFIG_IP_NF_TARGET_MARK is not set
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=m
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_PRINTK_TIME=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
[-- Attachment #3: lspci --]
[-- Type: text/plain, Size: 6461 bytes --]
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: Dell: Unknown device 019d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Dell: Unknown device 019d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ed98 [size=8]
Capabilities: <available only to root>
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 019d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 4: I/O ports at ff80 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 019d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 193
Region 4: I/O ports at ff60 [size=32]
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 019d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 4: I/O ports at ff20 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell: Unknown device 019d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 201
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell: Unknown device 019d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Dell: Unknown device 019d
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 3
Region 4: I/O ports at eda0 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
Subsystem: Dell: Unknown device 019d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 209
Region 0: I/O ports at ee00 [size=256]
Region 1: I/O ports at edc0 [size=64]
Region 2: Memory at feb7fa00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at feb7f900 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:01:01.0 Modem: Intel Corp.: Unknown device 1080 (rev 04) (prog-if 00 [Generic])
Subsystem: Dell: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 15500ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at de00 [size=256]
Capabilities: <available only to root>
0000:01:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev 02)
Subsystem: Dell: Unknown device 019d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ddc0 [size=64]
Capabilities: <available only to root>
[-- Attachment #4: dmesg --]
[-- Type: text/plain, Size: 15513 bytes --]
nk [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[4294671.196000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
[4294671.197000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[4294671.198000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[4294671.199000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[4294671.200000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[4294671.200000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[4294671.201000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[4294671.201000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.201000] pnp: PnP ACPI init
[4294671.226000] pnp: PnP ACPI: found 9 devices
[4294671.226000] PnPBIOS: Disabled by ACPI PNP
[4294671.226000] PCI: Using ACPI for IRQ routing
[4294671.226000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294671.237000] pnp: 00:08: ioport range 0x800-0x85f could not be reserved
[4294671.237000] pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
[4294671.237000] pnp: 00:08: ioport range 0x860-0x8ff could not be reserved
[4294671.237000] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[4294671.237000] Simple Boot Flag at 0x7a set to 0x1
[4294671.238000] inotify device minor=63
[4294671.238000] isapnp: Scanning for PnP cards...
[4294671.590000] isapnp: No Plug & Play device found
[4294671.612000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294671.612000] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 112
[4294671.616000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.616000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.616000] io scheduler noop registered
[4294671.616000] io scheduler anticipatory registered
[4294671.616000] io scheduler deadline registered
[4294671.616000] io scheduler cfq registered
[4294671.616000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.616000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.617000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294671.617000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
[4294671.617000] ICH5: chipset revision 2
[4294671.617000] ICH5: not 100% native mode: will probe irqs later
[4294671.617000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[4294671.617000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
[4294671.617000] Probing IDE interface ide0...
[4294671.882000] hda: Maxtor 6Y160P0, ATA DISK drive
[4294672.495000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294672.495000] Probing IDE interface ide1...
[4294673.168000] hdc: _NEC DVD+RW ND-3100AD, ATAPI CD/DVD-ROM drive
[4294673.780000] ide1 at 0x170-0x177,0x376 on irq 15
[4294673.781000] hda: max request size: 1024KiB
[4294673.792000] hda: 312500000 sectors (160000 MB) w/7936KiB Cache, CHS=19452/255/63, UDMA(100)
[4294673.792000] hda: cache flushes supported
[4294673.792000] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
[4294673.867000] NET: Registered protocol family 2
[4294673.876000] IP: routing cache hash table of 2048 buckets, 32Kbytes
[4294673.877000] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[4294673.877000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[4294673.877000] TCP: Hash tables configured (established 16384 bind 16384)
[4294673.877000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[4294673.877000] Starting balanced_irq
[4294673.877000] ACPI wakeup devices:
[4294673.877000] VBTN PCI0 USB0 USB1 USB2 USB3 PCI1 KBD
[4294673.877000] ACPI: (supports S0 S1 S3 S4 S5)
[4294673.906000] kjournald starting. Commit interval 5 seconds
[4294673.906000] EXT3-fs: mounted filesystem with ordered data mode.
[4294673.906000] VFS: Mounted root (ext3 filesystem) readonly.
[4294673.906000] Freeing unused kernel memory: 180k freed
[4294674.616000] NET: Registered protocol family 1
[4294676.026000] Adding 497972k swap on /dev/hda6. Priority:-1 extents:1
[4294676.085000] EXT3 FS on hda5, internal journal
[4294679.251000] hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294679.251000] Uniform CD-ROM driver Revision: 3.20
[4294679.287000] Probing IDE interface ide2...
[4294679.800000] Probing IDE interface ide3...
[4294680.313000] Probing IDE interface ide4...
[4294680.826000] Probing IDE interface ide5...
[4294682.412000] kjournald starting. Commit interval 5 seconds
[4294682.412000] EXT3 FS on hda7, internal journal
[4294682.412000] EXT3-fs: mounted filesystem with ordered data mode.
[4294683.270000] e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
[4294683.270000] e100: Copyright(c) 1999-2004 Intel Corporation
[4294683.280000] ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 177
[4294683.300000] e100: eth0: e100_probe: addr 0xfeaff000, irq 177, MAC addr 00:11:11:26:83:12
[4294683.570000] usbcore: registered new driver usbfs
[4294683.580000] usbcore: registered new driver hub
[4294683.623000] USB Universal Host Controller Interface driver v2.2
[4294683.623000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294683.623000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294683.623000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
[4294683.685000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294683.685000] uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000ff80
[4294683.694000] hub 1-0:1.0: USB hub found
[4294683.694000] hub 1-0:1.0: 2 ports detected
[4294683.702000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
[4294683.702000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294683.702000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
[4294683.774000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294683.774000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000ff60
[4294683.814000] hub 2-0:1.0: USB hub found
[4294683.814000] hub 2-0:1.0: 2 ports detected
[4294683.821000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 185
[4294683.821000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294683.821000] uhci_hcd 0000:00:1d.3: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
[4294683.918000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 3
[4294683.918000] uhci_hcd 0000:00:1d.3: irq 185, io base 0x0000ff20
[4294683.994000] hub 3-0:1.0: USB hub found
[4294683.994000] hub 3-0:1.0: 2 ports detected
[4294684.087000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[4294684.476000] usb 2-2: new full speed USB device using uhci_hcd and address 3
[4294685.628000] usbcore: registered new driver hiddev
[4294685.674000] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:1d.1-1
[4294685.674000] usbcore: registered new driver usbhid
[4294685.674000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294685.988000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
[4294685.988000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294685.988000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
[4294686.008000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[4294686.008000] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xffa80800
[4294686.013000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294686.013000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294686.038000] hub 4-0:1.0: USB hub found
[4294686.038000] hub 4-0:1.0: 8 ports detected
[4294686.502000] usb 2-1: USB disconnect, address 2
[4294686.667000] mice: PS/2 mouse device common for all mice
[4294686.880000] usb 2-1: new low speed USB device using uhci_hcd and address 4
[4294687.072000] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:1d.1-1
[4294687.072000] usb 2-2: USB disconnect, address 3
[4294687.359000] usb 2-2: new full speed USB device using uhci_hcd and address 5
[4294688.109000] Linux agpgart interface v0.101 (c) Dave Jones
[4294688.146000] agpgart: Detected an Intel 865 Chipset.
[4294688.146000] agpgart: Detected 8060K stolen memory.
[4294688.159000] agpgart: AGP aperture is 128M @ 0xf0000000
[4294688.944000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
[4294688.944000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294689.257000] intel8x0_measure_ac97_clock: measured 50549 usecs
[4294689.257000] intel8x0: clocking to 48000
[4294692.599000] input: PC Speaker
[4294692.847000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294693.235000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[4294695.271000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[4294695.549000] ACPI: Power Button (FF) [PWRF]
[4294789.526000] [drm] Initialized drm 1.0.0 20040925
[4294789.574000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294789.574000] [drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.
[4294789.574000] DRM: Fill_in_dev failed.
[4294869.116000] [drm] Module unloaded
[4294880.038000] [drm] Initialized drm 1.0.0 20040925
[4294880.044000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294880.045000] [drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.
[4294880.045000] DRM: Fill_in_dev failed.
[4294917.745000] [drm] Module unloaded
[4294928.936000] [drm] Initialized drm 1.0.0 20040925
[4294939.434000] [drm:drm_stub_open]
[4294939.434000] [drm:drm_stub_open]
[4294939.434000] [drm:drm_stub_open]
[4294939.434000] [drm:drm_stub_open]
[4294939.443000] [drm:drm_init]
[4294939.443000] [drm:drm_get_dev]
[4294939.444000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294939.444000] [drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.
[4294939.444000] [drm:drm_takedown]
[4294939.444000] DRM: Fill_in_dev failed.
[4294939.444000] [drm:drm_stub_open]
[4294939.445000] [drm:drm_stub_open]
[4294939.445000] [drm:drm_stub_open]
[4294939.445000] [drm:drm_stub_open]
[4294939.451000] [drm:drm_stub_open]
[4294939.451000] [drm:drm_stub_open]
[4294939.451000] [drm:drm_stub_open]
[4294939.451000] [drm:drm_stub_open]
[4294939.452000] [drm:drm_stub_open]
[4294939.452000] [drm:drm_stub_open]
[4294939.452000] [drm:drm_stub_open]
[4294939.452000] [drm:drm_stub_open]
[4294939.452000] [drm:drm_stub_open]
[4294939.452000] [drm:drm_stub_open]
[4294939.453000] [drm:drm_stub_open]
[4294939.453000] [drm:drm_stub_open]
[4294939.453000] [drm:drm_stub_open]
[4294939.453000] [drm:drm_stub_open]
[4294939.453000] [drm:drm_stub_open]
[4294939.453000] [drm:drm_stub_open]
[4294939.454000] [drm:drm_stub_open]
[4294939.454000] [drm:drm_stub_open]
[4294939.454000] [drm:drm_stub_open]
[4294939.454000] [drm:drm_stub_open]
[4294939.454000] [drm:drm_stub_open]
[4294939.454000] [drm:drm_stub_open]
[4294939.454000] [drm:drm_stub_open]
[4294939.454000] [drm:drm_stub_open]
[4294939.455000] [drm:drm_stub_open]
[4294939.455000] [drm:drm_stub_open]
[4294939.455000] [drm:drm_stub_open]
[4294939.455000] [drm:drm_stub_open]
[4294939.465000] [drm:drm_stub_open]
[4294939.465000] [drm:drm_stub_open]
[4294939.465000] [drm:drm_stub_open]
[4294939.465000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.466000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4294939.467000] [drm:drm_stub_open]
[4295205.248000] [drm:drm_exit]
[4295205.248000] [drm] Module unloaded
[4295214.360000] [drm] Initialized drm 1.0.0 20040925
[4295221.679000] [drm:drm_stub_open]
[4295221.679000] [drm:drm_stub_open]
[4295221.679000] [drm:drm_stub_open]
[4295221.679000] [drm:drm_stub_open]
[4295221.684000] [drm:drm_init]
[4295221.684000] [drm:drm_get_dev]
[4295221.684000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 185
[4295221.684000] [drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.
[4295221.685000] [drm:drm_takedown]
[4295221.685000] DRM: Fill_in_dev failed.
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.685000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.686000] [drm:drm_stub_open]
[4295221.687000] [drm:drm_stub_open]
[4295221.687000] [drm:drm_stub_open]
[4295221.687000] [drm:drm_stub_open]
[4295221.687000] [drm:drm_stub_open]
[4295221.687000] [drm:drm_stub_open]
[4295221.687000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.709000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
[4295221.710000] [drm:drm_stub_open]
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3 - DRM/i915 broken
2005-03-14 21:54 ` 2.6.11-mm3 - DRM/i915 broken Brice Goglin
@ 2005-03-14 22:30 ` Bernhard Rosenkraenzer
2005-03-14 22:57 ` Brice Goglin
0 siblings, 1 reply; 58+ messages in thread
From: Bernhard Rosenkraenzer @ 2005-03-14 22:30 UTC (permalink / raw)
To: Brice Goglin; +Cc: Andrew Morton, linux-kernel
On Monday 14 March 2005 22:54, Brice Goglin wrote:
> DRM/i915 does not work on my Dell Dimension 3000 (i865 chipset).
> It's the first -mm kernel I try on this box. I don't whether previous -mm
> worked or not. Anyway, 2.6.11 works great.
You may want to try compiling without CONFIG_4KSTACKS. I've run into (not 100%
reproducable) problems with i855 [and i865 is using a lot of the same code]
and 4K stacks before...
LLaP
bero
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 - DRM/i915 broken
2005-03-14 22:30 ` Bernhard Rosenkraenzer
@ 2005-03-14 22:57 ` Brice Goglin
2005-03-16 9:36 ` Dave Airlie
2005-03-16 18:57 ` 2.6.11-mm3 - DRM/i915 broken Ruben Fonseca
0 siblings, 2 replies; 58+ messages in thread
From: Brice Goglin @ 2005-03-14 22:57 UTC (permalink / raw)
To: Bernhard Rosenkraenzer; +Cc: Andrew Morton, linux-kernel
Bernhard Rosenkraenzer a écrit :
> On Monday 14 March 2005 22:54, Brice Goglin wrote:
>
>>DRM/i915 does not work on my Dell Dimension 3000 (i865 chipset).
>>It's the first -mm kernel I try on this box. I don't whether previous -mm
>>worked or not. Anyway, 2.6.11 works great.
>
>
> You may want to try compiling without CONFIG_4KSTACKS. I've run into (not 100%
> reproducable) problems with i855 [and i865 is using a lot of the same code]
> and 4K stacks before...
Thanks, but I still see my problem without 4K stacks.
Brice
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 - DRM/i915 broken
2005-03-14 22:57 ` Brice Goglin
@ 2005-03-16 9:36 ` Dave Airlie
2005-03-17 18:57 ` Brice Goglin
2005-03-19 2:45 ` Fix agp_backend usage in drm_agp_init (was: 2.6.11-mm3 - DRM/i915 broken) Brice Goglin
2005-03-16 18:57 ` 2.6.11-mm3 - DRM/i915 broken Ruben Fonseca
1 sibling, 2 replies; 58+ messages in thread
From: Dave Airlie @ 2005-03-16 9:36 UTC (permalink / raw)
To: Brice Goglin; +Cc: Bernhard Rosenkraenzer, Andrew Morton, linux-kernel
> >
> >>DRM/i915 does not work on my Dell Dimension 3000 (i865 chipset).
> >>It's the first -mm kernel I try on this box. I don't whether previous -mm
> >>worked or not. Anyway, 2.6.11 works great.
> >
> >
This is more than likely caused by the multi-bridge AGP stuff in -bk3
.. if you could test 2.6.11-bk2 and then -bk3 and see if it breaks
there.. if not there can you test the -bk6 -bk7 transition...
these are the only two points where DRM stuff was merged in .. I'm in
no position to test for about a week so unless someone else gets to it
first it'll be at least that long..
Dave.
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 - DRM/i915 broken
2005-03-16 9:36 ` Dave Airlie
@ 2005-03-17 18:57 ` Brice Goglin
2005-03-19 2:45 ` Fix agp_backend usage in drm_agp_init (was: 2.6.11-mm3 - DRM/i915 broken) Brice Goglin
1 sibling, 0 replies; 58+ messages in thread
From: Brice Goglin @ 2005-03-17 18:57 UTC (permalink / raw)
To: Dave Airlie; +Cc: Bernhard Rosenkraenzer, Andrew Morton, linux-kernel
Dave Airlie a écrit :
>>DRM/i915 does not work on my Dell Dimension 3000 (i865 chipset).
>>It's the first -mm kernel I try on this box. I don't whether previous -mm
>>worked or not. Anyway, 2.6.11 works great.
>
> This is more than likely caused by the multi-bridge AGP stuff in -bk3
> .. if you could test 2.6.11-bk2 and then -bk3 and see if it breaks
> there.. if not there can you test the -bk6 -bk7 transition...
The break is between bk2 and bk3.
Let me know if you want me to try some patches.
Regards,
Brice
^ permalink raw reply [flat|nested] 58+ messages in thread
* Fix agp_backend usage in drm_agp_init (was: 2.6.11-mm3 - DRM/i915 broken)
2005-03-16 9:36 ` Dave Airlie
2005-03-17 18:57 ` Brice Goglin
@ 2005-03-19 2:45 ` Brice Goglin
2005-03-19 3:40 ` Jesse Barnes
[not found] ` <200503191247.48963.werner@sgi.com>
1 sibling, 2 replies; 58+ messages in thread
From: Brice Goglin @ 2005-03-19 2:45 UTC (permalink / raw)
To: Dave Airlie; +Cc: Mike Werner, Andrew Morton, linux-kernel, Linus Torvalds
Dave Airlie wrote:
>>DRM/i915 does not work on my Dell Dimension 3000 (i865 chipset).
>
> This is more than likely caused by the multi-bridge AGP stuff in -bk3
Yes, that's it! The bug appeared in -mm when the multi-bridge AGP stuff
was merged (2.6.10-mm3). It is still here in 2.6.12-rc1.
Here's the scenario I think I'm seeing:
agpioc_acquire_wrap is called, it increments the agp_in_use. Then (before
agpioc_release_wrap happens), drm_agp_init is called (I don't know how).
drm_agp_init uses agp_backend_acquire which fails because agp_in_use is
non-null (hold by agpioc_acquire_wrap).
The multi-bridge AGP patch actually changed drm_agp_init by adding
agp_backend_acquire/release around agp_copy_info.
It is why drm_agp_init fails now while it worked before.
I don't think we need to "acquire" it during agp_copy_info.
Why don't we just get a pointer to the bridge instead ?
(is there any chance this bridge gets deleted during drm_agp_init ?)
That's what the attached patch implements on top of 2.6.12-rc1.
I chose to add a new agp_backend_find() function, but we might also
directly call agp_find_bridge() from drm_agp_init(). I don't know what's
the best.
I'm not familiar enough with DRM/AGP code to understand everything here.
I might be missing something...
Regards,
Brice
Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
--- linux-rc/include/linux/agp_backend.h.old 2005-03-19 03:26:36.000000000 +0100
+++ linux-rc/include/linux/agp_backend.h 2005-03-19 03:35:43.000000000 +0100
@@ -102,6 +102,7 @@ extern int agp_copy_info(struct agp_brid
extern int agp_bind_memory(struct agp_memory *, off_t);
extern int agp_unbind_memory(struct agp_memory *);
extern void agp_enable(struct agp_bridge_data *, u32);
+extern struct agp_bridge_data *agp_backend_find(struct pci_dev *);
extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
extern void agp_backend_release(struct agp_bridge_data *);
--- linux-rc/drivers/char/agp/backend.c.old 2005-03-19 03:30:32.000000000 +0100
+++ linux-rc/drivers/char/agp/backend.c 2005-03-19 03:35:24.000000000 +0100
@@ -58,6 +58,12 @@ LIST_HEAD(agp_bridges);
EXPORT_SYMBOL(agp_bridge);
EXPORT_SYMBOL(agp_bridges);
+struct agp_bridge_data *agp_backend_find(struct pci_dev *pdev)
+{
+ return agp_find_bridge(pdev);
+}
+EXPORT_SYMBOL(agp_backend_find);
+
/**
* agp_backend_acquire - attempt to acquire an agp backend.
*
@@ -66,7 +72,7 @@ struct agp_bridge_data *agp_backend_acqu
{
struct agp_bridge_data *bridge;
- bridge = agp_find_bridge(pdev);
+ bridge = agp_backend_find(pdev);
if (!bridge)
return NULL;
--- linux-rc/drivers/char/drm/drm_agpsupport.c.old 2005-03-19 03:29:50.000000000 +0100
+++ linux-rc/drivers/char/drm/drm_agpsupport.c 2005-03-19 03:34:28.000000000 +0100
@@ -387,12 +387,11 @@ drm_agp_head_t *drm_agp_init(drm_device_
if (!(head = drm_alloc(sizeof(*head), DRM_MEM_AGPLISTS)))
return NULL;
memset((void *)head, 0, sizeof(*head));
- if (!(head->bridge = agp_backend_acquire(dev->pdev))) {
+ if (!(head->bridge = agp_backend_find(dev->pdev))) {
drm_free(head, sizeof(*head), DRM_MEM_AGPLISTS);
return NULL;
}
agp_copy_info(head->bridge, &head->agp_info);
- agp_backend_release(head->bridge);
if (head->agp_info.chipset == NOT_SUPPORTED) {
drm_free(head, sizeof(*head), DRM_MEM_AGPLISTS);
return NULL;
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: Fix agp_backend usage in drm_agp_init (was: 2.6.11-mm3 - DRM/i915 broken)
2005-03-19 2:45 ` Fix agp_backend usage in drm_agp_init (was: 2.6.11-mm3 - DRM/i915 broken) Brice Goglin
@ 2005-03-19 3:40 ` Jesse Barnes
2005-03-19 3:48 ` Jesse Barnes
[not found] ` <200503191247.48963.werner@sgi.com>
1 sibling, 1 reply; 58+ messages in thread
From: Jesse Barnes @ 2005-03-19 3:40 UTC (permalink / raw)
To: Brice Goglin
Cc: Dave Airlie, Mike Werner, Andrew Morton, linux-kernel,
Linus Torvalds, m4rkusxxl
On Friday, March 18, 2005 6:45 pm, Brice Goglin wrote:
> agpioc_acquire_wrap is called, it increments the agp_in_use. Then (before
> agpioc_release_wrap happens), drm_agp_init is called (I don't know how).
> drm_agp_init uses agp_backend_acquire which fails because agp_in_use is
> non-null (hold by agpioc_acquire_wrap).
>
> The multi-bridge AGP patch actually changed drm_agp_init by adding
> agp_backend_acquire/release around agp_copy_info.
> It is why drm_agp_init fails now while it worked before.
>
> I don't think we need to "acquire" it during agp_copy_info.
> Why don't we just get a pointer to the bridge instead ?
> (is there any chance this bridge gets deleted during drm_agp_init ?)
> That's what the attached patch implements on top of 2.6.12-rc1.
>
> I chose to add a new agp_backend_find() function, but we might also
> directly call agp_find_bridge() from drm_agp_init(). I don't know what's
> the best.
>
> I'm not familiar enough with DRM/AGP code to understand everything here.
> I might be missing something...
What does your patch look like? Markus might like to try it out as he
narrowed his problem down to something AGP related recently too:
http://bugme.osdl.org/show_bug.cgi?id=4337
Thanks,
Jesse
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: Fix agp_backend usage in drm_agp_init (was: 2.6.11-mm3 - DRM/i915 broken)
2005-03-19 3:40 ` Jesse Barnes
@ 2005-03-19 3:48 ` Jesse Barnes
2005-03-19 16:32 ` Jesse Barnes
0 siblings, 1 reply; 58+ messages in thread
From: Jesse Barnes @ 2005-03-19 3:48 UTC (permalink / raw)
To: Brice Goglin
Cc: Dave Airlie, Mike Werner, Andrew Morton, linux-kernel,
Linus Torvalds, m4rkusxxl
On Friday, March 18, 2005 7:40 pm, Jesse Barnes wrote:
> What does your patch look like? Markus might like to try it out as he
> narrowed his problem down to something AGP related recently too:
> http://bugme.osdl.org/show_bug.cgi?id=4337
duh, ignore me. At least Markus can give it a try.
Jesse
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: Fix agp_backend usage in drm_agp_init (was: 2.6.11-mm3 - DRM/i915 broken)
2005-03-19 3:48 ` Jesse Barnes
@ 2005-03-19 16:32 ` Jesse Barnes
0 siblings, 0 replies; 58+ messages in thread
From: Jesse Barnes @ 2005-03-19 16:32 UTC (permalink / raw)
To: Brice Goglin
Cc: Dave Airlie, Mike Werner, Andrew Morton, linux-kernel,
Linus Torvalds, m4rkusxxl
On Friday, March 18, 2005 7:48 pm, Jesse Barnes wrote:
> On Friday, March 18, 2005 7:40 pm, Jesse Barnes wrote:
> > What does your patch look like? Markus might like to try it out as he
> > narrowed his problem down to something AGP related recently too:
> > http://bugme.osdl.org/show_bug.cgi?id=4337
>
> duh, ignore me. At least Markus can give it a try.
Oh well, Brice's patch didn't work for Marcus (symptoms were different anyway
so it was a long shot). I really have to find an AGP machine with a single
pipe to test this stuff on...
Jesse
^ permalink raw reply [flat|nested] 58+ messages in thread
[parent not found: <200503191247.48963.werner@sgi.com>]
* Re: 2.6.11-mm3 - DRM/i915 broken
2005-03-14 22:57 ` Brice Goglin
2005-03-16 9:36 ` Dave Airlie
@ 2005-03-16 18:57 ` Ruben Fonseca
1 sibling, 0 replies; 58+ messages in thread
From: Ruben Fonseca @ 2005-03-16 18:57 UTC (permalink / raw)
To: Brice Goglin; +Cc: Andrew Morton, linux-kernel
Just to report that I've got the same problem with 2.6.11-mm3, with
and without 4K stacks :( no DRI for now...
Rúben
On Mon, 14 Mar 2005 23:57:19 +0100, Brice Goglin
<Brice.Goglin@ens-lyon.org> wrote:
> Bernhard Rosenkraenzer a écrit :
> > On Monday 14 March 2005 22:54, Brice Goglin wrote:
> >
> >>DRM/i915 does not work on my Dell Dimension 3000 (i865 chipset).
> >>It's the first -mm kernel I try on this box. I don't whether previous -mm
> >>worked or not. Anyway, 2.6.11 works great.
> >
> >
> > You may want to try compiling without CONFIG_4KSTACKS. I've run into (not 100%
> > reproducable) problems with i855 [and i865 is using a lot of the same code]
> > and 4K stacks before...
>
> Thanks, but I still see my problem without 4K stacks.
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (10 preceding siblings ...)
2005-03-14 21:54 ` 2.6.11-mm3 - DRM/i915 broken Brice Goglin
@ 2005-03-15 7:57 ` Stefano Rivoir
2005-03-15 12:25 ` 2.6.11-mm3 mouse oddity Helge Hafting
2005-03-15 15:06 ` 2.6.11-mm3: megaraid_sas.c: stack usage Adrian Bunk
13 siblings, 0 replies; 58+ messages in thread
From: Stefano Rivoir @ 2005-03-15 7:57 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 436 bytes --]
Alle 12:42, sabato 12 marzo 2005, Andrew Morton ha scritto:
> - A new version of the "acpi poweroff fix". People who were having trouble
> with ACPI poweroff, please test and report.
Hi Andrew,
This does not work for me. The only difference since previous versions is that
cursor stops blinking (don't know how meaningful can this be...), but the box
hangs as usual.
Here attached .config and lscpi-v.
Bye
--
Stefano Rivoir
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 30140 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-mm3
# Mon Mar 14 09:12:55 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_ISCSI_IF is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
# CONFIG_IP_NF_TARGET_MARK is not set
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SKGE=m
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
CONFIG_USB_STORAGE_USBAT=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
[-- Attachment #3: lspci --]
[-- Type: text/plain, Size: 5605 bytes --]
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 1738
Flags: bus master, medium devsel, latency 32
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e7800000-e7ffffff
Prefetchable memory behind bridge: eff00000-febfffff
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
Flags: bus master, medium devsel, latency 0
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Flags: medium devsel
I/O ports at e800 [size=32]
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1737
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e7000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [64] Power Management version 2
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 1738
Flags: bus master, medium devsel, latency 32
I/O ports at b800 [size=16]
Capabilities: [58] Power Management version 2
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: Asustek Computer, Inc.: Unknown device 1736
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at b400 [size=256]
I/O ports at b000 [size=128]
Capabilities: [48] Power Management version 2
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: Asustek Computer, Inc.: Unknown device 1733
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at a800 [size=256]
I/O ports at a400 [size=128]
Capabilities: [48] Power Management version 2
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e5800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 173a
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB720 Cardbus Controller (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 1734
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
0000:00:0a.1 CardBus bridge: ENE Technology Inc CB720 Cardbus Controller (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 1734
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 20c00000-20fff000 (prefetchable)
Memory window 1: 21000000-213ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
0000:00:0a.2 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Controller
Subsystem: Asustek Computer, Inc.: Unknown device 173b
Flags: medium devsel, IRQ 11
I/O ports at 9800 [size=128]
Capabilities: [a0] Power Management version 2
0000:00:0d.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
Subsystem: Asustek Computer, Inc.: Unknown device 173c
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at e4000000 (32-bit, non-prefetchable) [size=16K]
I/O ports at 9400 [size=256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1732
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at d800 [size=256]
Memory at e7800000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3 mouse oddity
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (11 preceding siblings ...)
2005-03-15 7:57 ` 2.6.11-mm3 Stefano Rivoir
@ 2005-03-15 12:25 ` Helge Hafting
2005-03-15 14:25 ` Dmitry Torokhov
2005-03-15 15:06 ` 2.6.11-mm3: megaraid_sas.c: stack usage Adrian Bunk
13 siblings, 1 reply; 58+ messages in thread
From: Helge Hafting @ 2005-03-15 12:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
2.6.11-mm3: mouse appear as /dev/input/mouse1
No big problem, one change to xorg.conf and I got the mouse back.
I guess it wasn't supposed to change like that though?
This is a mouse connected to the ps2 port, also appearing as /dev/psaux
Helge Hafting
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3 mouse oddity
2005-03-15 12:25 ` 2.6.11-mm3 mouse oddity Helge Hafting
@ 2005-03-15 14:25 ` Dmitry Torokhov
2005-03-15 14:36 ` Vojtech Pavlik
2005-03-15 19:01 ` Andrew Morton
0 siblings, 2 replies; 58+ messages in thread
From: Dmitry Torokhov @ 2005-03-15 14:25 UTC (permalink / raw)
To: Helge Hafting; +Cc: Andrew Morton, linux-kernel, Vojtech Pavlik
On Tue, 15 Mar 2005 13:25:12 +0100, Helge Hafting
<helge.hafting@aitel.hist.no> wrote:
> 2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
> 2.6.11-mm3: mouse appear as /dev/input/mouse1
>
> No big problem, one change to xorg.conf and I got the mouse back.
> I guess it wasn't supposed to change like that though?
>
Vojtech activated scroll handling in keyboard code by default so now
your keyboard is mapped to the mouse0 and the mouse moved to mouse1.
Vojtech, is is possible to detect whether a keyboard has scroll
wheel(s) by its ID?
> This is a mouse connected to the ps2 port, also appearing as /dev/psaux
>
I'd recommend using /dev/input/mice unless you want to _exclude_ some
of your input devices. It will get data from all you mice at once and
is always available.
--
Dmitry
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 mouse oddity
2005-03-15 14:25 ` Dmitry Torokhov
@ 2005-03-15 14:36 ` Vojtech Pavlik
2005-03-15 19:01 ` Andrew Morton
1 sibling, 0 replies; 58+ messages in thread
From: Vojtech Pavlik @ 2005-03-15 14:36 UTC (permalink / raw)
To: dtor_core; +Cc: Helge Hafting, Andrew Morton, linux-kernel
On Tue, Mar 15, 2005 at 09:25:45AM -0500, Dmitry Torokhov wrote:
> Vojtech activated scroll handling in keyboard code by default so now
> your keyboard is mapped to the mouse0 and the mouse moved to mouse1.
>
> Vojtech, is is possible to detect whether a keyboard has scroll
> wheel(s) by its ID?
If it were, I'd already have used it.
> > This is a mouse connected to the ps2 port, also appearing as /dev/psaux
>
> I'd recommend using /dev/input/mice unless you want to _exclude_ some
> of your input devices. It will get data from all you mice at once and
> is always available.
--
Vojtech Pavlik
SuSE Labs, SuSE CR
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 mouse oddity
2005-03-15 14:25 ` Dmitry Torokhov
2005-03-15 14:36 ` Vojtech Pavlik
@ 2005-03-15 19:01 ` Andrew Morton
2005-03-15 19:33 ` Dave Jones
` (3 more replies)
1 sibling, 4 replies; 58+ messages in thread
From: Andrew Morton @ 2005-03-15 19:01 UTC (permalink / raw)
To: dtor_core; +Cc: dmitry.torokhov, helge.hafting, linux-kernel, vojtech
Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>
> On Tue, 15 Mar 2005 13:25:12 +0100, Helge Hafting
> <helge.hafting@aitel.hist.no> wrote:
> > 2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
> > 2.6.11-mm3: mouse appear as /dev/input/mouse1
> >
> > No big problem, one change to xorg.conf and I got the mouse back.
> > I guess it wasn't supposed to change like that though?
> >
>
> Vojtech activated scroll handling in keyboard code by default so now
> your keyboard is mapped to the mouse0 and the mouse moved to mouse1.
We cannot ship a kernel with this change, surely? Our users would come
hunting for us with pitchforks.
> Vojtech, is is possible to detect whether a keyboard has scroll
> wheel(s) by its ID?
What sort of keyboard has a scroll wheel??
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3 mouse oddity
2005-03-15 19:01 ` Andrew Morton
@ 2005-03-15 19:33 ` Dave Jones
2005-03-15 19:34 ` Dmitry Torokhov
` (2 subsequent siblings)
3 siblings, 0 replies; 58+ messages in thread
From: Dave Jones @ 2005-03-15 19:33 UTC (permalink / raw)
To: Andrew Morton
Cc: dtor_core, dmitry.torokhov, helge.hafting, linux-kernel, vojtech
On Tue, Mar 15, 2005 at 11:01:46AM -0800, Andrew Morton wrote:
> > Vojtech, is is possible to detect whether a keyboard has scroll
> > wheel(s) by its ID?
>
> What sort of keyboard has a scroll wheel??
Quite a few of them.
http://froogle.google.com/froogle?q=keyboard%20scroll%20wheel
They seem to be gaining in popularity, and seem to do all sorts
of other silly things (some of them even throb different colours
when idle for some reason).
Dave
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3 mouse oddity
2005-03-15 19:01 ` Andrew Morton
2005-03-15 19:33 ` Dave Jones
@ 2005-03-15 19:34 ` Dmitry Torokhov
2005-03-15 19:54 ` Sean
2005-03-15 20:10 ` Vojtech Pavlik
2005-03-16 9:44 ` Helge Hafting
3 siblings, 1 reply; 58+ messages in thread
From: Dmitry Torokhov @ 2005-03-15 19:34 UTC (permalink / raw)
To: Andrew Morton; +Cc: helge.hafting, linux-kernel, vojtech
On Tue, 15 Mar 2005 11:01:46 -0800, Andrew Morton <akpm@osdl.org> wrote:
> Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> >
> > On Tue, 15 Mar 2005 13:25:12 +0100, Helge Hafting
> > <helge.hafting@aitel.hist.no> wrote:
> > > 2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
> > > 2.6.11-mm3: mouse appear as /dev/input/mouse1
> > >
> > > No big problem, one change to xorg.conf and I got the mouse back.
> > > I guess it wasn't supposed to change like that though?
> > >
> >
> > Vojtech activated scroll handling in keyboard code by default so now
> > your keyboard is mapped to the mouse0 and the mouse moved to mouse1.
>
> We cannot ship a kernel with this change, surely? Our users would come
> hunting for us with pitchforks.
>
Not really, athough I was surprised when I noticed that I have extra
mouse devices. I would expect most people using /dev/input/mice which
multiplexes data streams from all mouse-like devices.
I think wacom users will be in for surprise because wacom requres you
to specify exact device name the regular mouse is using. I actually
think wacom X driver shoudl do what Synaptics does and grab evdev
intrface.
> > Vojtech, is it possible to detect whether a keyboard has scroll
> > wheel(s) by its ID?
>
> What sort of keyboard has a scroll wheel??
Some Microsoft ones IIRC.
--
Dmitry
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 mouse oddity
2005-03-15 19:01 ` Andrew Morton
2005-03-15 19:33 ` Dave Jones
2005-03-15 19:34 ` Dmitry Torokhov
@ 2005-03-15 20:10 ` Vojtech Pavlik
2005-03-16 9:47 ` Helge Hafting
2005-03-16 9:44 ` Helge Hafting
3 siblings, 1 reply; 58+ messages in thread
From: Vojtech Pavlik @ 2005-03-15 20:10 UTC (permalink / raw)
To: Andrew Morton; +Cc: dtor_core, dmitry.torokhov, helge.hafting, linux-kernel
On Tue, Mar 15, 2005 at 11:01:46AM -0800, Andrew Morton wrote:
> Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> >
> > On Tue, 15 Mar 2005 13:25:12 +0100, Helge Hafting
> > <helge.hafting@aitel.hist.no> wrote:
> > > 2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
> > > 2.6.11-mm3: mouse appear as /dev/input/mouse1
> > >
> > > No big problem, one change to xorg.conf and I got the mouse back.
> > > I guess it wasn't supposed to change like that though?
> > >
> >
> > Vojtech activated scroll handling in keyboard code by default so now
> > your keyboard is mapped to the mouse0 and the mouse moved to mouse1.
>
> We cannot ship a kernel with this change, surely? Our users would come
> hunting for us with pitchforks.
Mouse device numbers are defined to be unstable because of hotplug.
Most users use /dev/input/mice, where this won't have impact.
The officially correct solution is to use udev to get stable device
names.
The change is easily reverted - just change the 'atkbd.scroll' default
value.
> > Vojtech, is is possible to detect whether a keyboard has scroll
> > wheel(s) by its ID?
>
> What sort of keyboard has a scroll wheel??
Many today. Microsoft, Logitech, most "office" and "internet" keyboards.
--
Vojtech Pavlik
SuSE Labs, SuSE CR
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 mouse oddity
2005-03-15 20:10 ` Vojtech Pavlik
@ 2005-03-16 9:47 ` Helge Hafting
2005-03-16 17:29 ` Vojtech Pavlik
0 siblings, 1 reply; 58+ messages in thread
From: Helge Hafting @ 2005-03-16 9:47 UTC (permalink / raw)
To: Vojtech Pavlik; +Cc: Andrew Morton, dtor_core, dmitry.torokhov, linux-kernel
Vojtech Pavlik wrote:
>On Tue, Mar 15, 2005 at 11:01:46AM -0800, Andrew Morton wrote:
>
>
>>Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>>
>>
>>>On Tue, 15 Mar 2005 13:25:12 +0100, Helge Hafting
>>><helge.hafting@aitel.hist.no> wrote:
>>>
>>>
>>>>2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
>>>>2.6.11-mm3: mouse appear as /dev/input/mouse1
>>>>
>>>>No big problem, one change to xorg.conf and I got the mouse back.
>>>>I guess it wasn't supposed to change like that though?
>>>>
>>>>
>>>>
>>>Vojtech activated scroll handling in keyboard code by default so now
>>>your keyboard is mapped to the mouse0 and the mouse moved to mouse1.
>>>
>>>
>>We cannot ship a kernel with this change, surely? Our users would come
>>hunting for us with pitchforks.
>>
>>
>
>Mouse device numbers are defined to be unstable because of hotplug.
>
>Most users use /dev/input/mice, where this won't have impact.
>
>The officially correct solution is to use udev to get stable device
>names.
>
>The change is easily reverted - just change the 'atkbd.scroll' default
>value.
>
>
Please don't remove it - it is nice to have support for the hardware.
Apps using this is also necessary - and they are possible now.
If you want to go the route of least surprise you may want to
make sure the "new" mice get higher numbers instead of
pushing "older" mice around.
Helge Hafting
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 mouse oddity
2005-03-16 9:47 ` Helge Hafting
@ 2005-03-16 17:29 ` Vojtech Pavlik
0 siblings, 0 replies; 58+ messages in thread
From: Vojtech Pavlik @ 2005-03-16 17:29 UTC (permalink / raw)
To: Helge Hafting; +Cc: Andrew Morton, dtor_core, dmitry.torokhov, linux-kernel
On Wed, Mar 16, 2005 at 10:47:00AM +0100, Helge Hafting wrote:
> >Mouse device numbers are defined to be unstable because of hotplug.
> >
> >Most users use /dev/input/mice, where this won't have impact.
> >
> >The officially correct solution is to use udev to get stable device
> >names.
> >
> >The change is easily reverted - just change the 'atkbd.scroll' default
> >value.
> Please don't remove it - it is nice to have support for the hardware.
> Apps using this is also necessary - and they are possible now.
> If you want to go the route of least surprise you may want to
> make sure the "new" mice get higher numbers instead of
> pushing "older" mice around.
The numbers are based on probe order, first come, first serve.
--
Vojtech Pavlik
SuSE Labs, SuSE CR
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 mouse oddity
2005-03-15 19:01 ` Andrew Morton
` (2 preceding siblings ...)
2005-03-15 20:10 ` Vojtech Pavlik
@ 2005-03-16 9:44 ` Helge Hafting
2005-03-16 17:30 ` Vojtech Pavlik
3 siblings, 1 reply; 58+ messages in thread
From: Helge Hafting @ 2005-03-16 9:44 UTC (permalink / raw)
To: Andrew Morton; +Cc: dtor_core, dmitry.torokhov, linux-kernel, vojtech
Andrew Morton wrote:
>Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>
>
>>On Tue, 15 Mar 2005 13:25:12 +0100, Helge Hafting
>><helge.hafting@aitel.hist.no> wrote:
>>
>>
>>>2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
>>>2.6.11-mm3: mouse appear as /dev/input/mouse1
>>>
>>>No big problem, one change to xorg.conf and I got the mouse back.
>>>I guess it wasn't supposed to change like that though?
>>>
>>>
>>>
>>Vojtech activated scroll handling in keyboard code by default so now
>>your keyboard is mapped to the mouse0 and the mouse moved to mouse1.
>>
>>
>
>We cannot ship a kernel with this change, surely? Our users would come
>hunting for us with pitchforks.
>
>
I like it, actually. Now I have support for the wheels on this
logitech wireless keyboard. Note that most users won't get
trouble, because they use /dev/mice. Which is something
all single-head machines can do.
>
>
>>Vojtech, is is possible to detect whether a keyboard has scroll
>>wheel(s) by its ID?
>>
>>
>
>What sort of keyboard has a scroll wheel??
>
>
>
The logitech cordless keyboard is one. It has two wheels.
The one on the side works generates up-arrow/down arrow when used,
and now also events on /dev/mouse0. The other is a wheel above
the keys, lying on the side. Logitech apparently meant it to be used as
a volume control, which should be possible now that it attaches to
/dev/mouse0.
Note that /dev/mice isn't always the answer - dual seat machines
need to separate the various mice and keyboards.
Helge Hafting
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: 2.6.11-mm3 mouse oddity
2005-03-16 9:44 ` Helge Hafting
@ 2005-03-16 17:30 ` Vojtech Pavlik
2005-03-17 11:09 ` Helge Hafting
0 siblings, 1 reply; 58+ messages in thread
From: Vojtech Pavlik @ 2005-03-16 17:30 UTC (permalink / raw)
To: Helge Hafting; +Cc: Andrew Morton, dtor_core, dmitry.torokhov, linux-kernel
On Wed, Mar 16, 2005 at 10:44:04AM +0100, Helge Hafting wrote:
> The logitech cordless keyboard is one. It has two wheels.
> The one on the side works generates up-arrow/down arrow when used,
> and now also events on /dev/mouse0. The other is a wheel above
> the keys, lying on the side. Logitech apparently meant it to be used as
> a volume control, which should be possible now that it attaches to
> /dev/mouse0.
Can you please check with 'evtest' that both the wheels work correctly?
Also, there exists an event mouse driver for X which supports both
wheels and allows for vertical and horizontal scrolling in eg. Firefox.
--
Vojtech Pavlik
SuSE Labs, SuSE CR
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 mouse oddity
2005-03-16 17:30 ` Vojtech Pavlik
@ 2005-03-17 11:09 ` Helge Hafting
2005-03-17 12:14 ` Vojtech Pavlik
0 siblings, 1 reply; 58+ messages in thread
From: Helge Hafting @ 2005-03-17 11:09 UTC (permalink / raw)
To: Vojtech Pavlik; +Cc: Andrew Morton, dtor_core, dmitry.torokhov, linux-kernel
Vojtech Pavlik wrote:
>On Wed, Mar 16, 2005 at 10:44:04AM +0100, Helge Hafting wrote:
>
>
>
>>The logitech cordless keyboard is one. It has two wheels.
>>The one on the side works generates up-arrow/down arrow when used,
>>and now also events on /dev/mouse0. The other is a wheel above
>>the keys, lying on the side. Logitech apparently meant it to be used as
>>a volume control, which should be possible now that it attaches to
>>/dev/mouse0.
>>
>>
>
>Can you please check with 'evtest' that both the wheels work correctly?
>
>
>
Not sure what is correct here, but:
evtest /dev/input/event0 produce events for all keys on the keyboard.
Both the normal pc-105 keys, silly extra keys like "favourites", "shopping",
etc., and the wheels. The "volume" wheel generates VolumeUp and
VolumeDown keypresses (and releases.) The other wheels generates
the same events as the up-arrow and down-arrow keys.
evtest on /dev/input/event1 gives me events from the mouse.
mouse0, mouse1 and mouse2 cannot be used with evtest.
>Also, there exists an event mouse driver for X which supports both
>wheels and allows for vertical and horizontal scrolling in eg. Firefox.
>
>
Helge Hafting
^ permalink raw reply [flat|nested] 58+ messages in thread
* Re: 2.6.11-mm3 mouse oddity
2005-03-17 11:09 ` Helge Hafting
@ 2005-03-17 12:14 ` Vojtech Pavlik
0 siblings, 0 replies; 58+ messages in thread
From: Vojtech Pavlik @ 2005-03-17 12:14 UTC (permalink / raw)
To: Helge Hafting; +Cc: Andrew Morton, dtor_core, dmitry.torokhov, linux-kernel
On Thu, Mar 17, 2005 at 12:09:29PM +0100, Helge Hafting wrote:
> Not sure what is correct here, but:
> evtest /dev/input/event0 produce events for all keys on the keyboard.
> Both the normal pc-105 keys, silly extra keys like "favourites", "shopping",
> etc., and the wheels. The "volume" wheel generates VolumeUp and
> VolumeDown keypresses (and releases.) The other wheels generates
> the same events as the up-arrow and down-arrow keys.
In that case you don't need the wheel support in the atkbd.c driver.
It's for keyboards that generate the "Wheel +1" "Wheel -1" events like a
mouse would.
> evtest on /dev/input/event1 gives me events from the mouse.
> mouse0, mouse1 and mouse2 cannot be used with evtest.
--
Vojtech Pavlik
SuSE Labs, SuSE CR
^ permalink raw reply [flat|nested] 58+ messages in thread
* 2.6.11-mm3: megaraid_sas.c: stack usage
2005-03-12 11:42 2.6.11-mm3 Andrew Morton
` (12 preceding siblings ...)
2005-03-15 12:25 ` 2.6.11-mm3 mouse oddity Helge Hafting
@ 2005-03-15 15:06 ` Adrian Bunk
13 siblings, 0 replies; 58+ messages in thread
From: Adrian Bunk @ 2005-03-15 15:06 UTC (permalink / raw)
To: Andrew Morton, Bagalkote, Sreenivas; +Cc: linux-kernel, linux-scsi
On Sat, Mar 12, 2005 at 03:42:22AM -0800, Andrew Morton wrote:
>...
> All 606 patches:
>...
> megaraid_sas-announcing-new-module-for.patch
> megaraid_sas: Announcing new module for LSI Logic's SAS based MegaRAID controllers
>...
Enormous stack usage:
- megasas_init_mfi (due to ctrl_info)
Big stack usage:
- megasas_mgmt_ioctl (due to uioc and dv)
- megasas_mgmt_fw_ioctl (due to uioc)
Please fix this.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 58+ messages in thread
