Re: [PATCH 2/4] dts: arm64/sdm845: Add WCN3990 WLAN module device node

[Govind Singh <govinds@codeaurora.org>]

Hi Brian,

On 2018-09-24 22:41, Brian Norris wrote:
> Hi,
> 
> On Fri, Sep 21, 2018 at 02:39:05PM +0530, Govind Singh wrote:
>> Add device node for the ath10k SNOC platform driver probe
>> and add resources required for WCN3990 on SDM845 soc.
>> 
>> Signed-off-by: Govind Singh <govinds@codeaurora.org>
>> ---
>>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts |  7 +++++++
>>  arch/arm64/boot/dts/qcom/sdm845.dtsi    | 25 
>> +++++++++++++++++++++++++
>>  2 files changed, 32 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts 
>> b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
>> index eedfaf8922e2..4de57f7df93c 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
>> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
>> @@ -440,3 +440,10 @@
>>  		bias-pull-up;
>>  	};
>>  };
>> +
>> +&wifi {
> 
> As the bots have already told you, you missed adding a 'wifi' label to
> sdm845.dtsi, so this reference doesn't compile.
> 

Yes, I will correct this in next revision.

>> +	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
>> +	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
>> +	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
>> +	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi 
>> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index e080072cdfdb..b0b107641e74 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -86,6 +86,11 @@
>>  			reg = <0 0x86200000 0 0x2d00000>;
>>  			no-map;
>>  		};
>> +
>> +		wlan_msa_mem: reserved-memory@96700000 {
>> +			no-map;
>> +			reg = <0 0x96700000 0 0x100000>;
>> +		};
>>  	};
>> 
>>  	cpus {
>> @@ -1200,5 +1205,25 @@
>>  				status = "disabled";
>>  			};
>>  		};
>> +
>> +		qcom,wifi {
> 
> That's not a legit node name. Nodes should (a) have a generic name and
> (b) include a unit address when the node contains a 'reg' property. [1]
> 
> So, how about 'wifi@18800000'? (And include the 'wifi:' label, since 
> you
> want to refer to it in other files.)
> 

I am fine with 'wifi@18800000'.

> Also, this seems like the kind of device that should remain 'status =
> "disabled"' in the top-level DTSI, and be overridden with 'status =
> "okay"' in the child DTS.
> 

Sure, i will populate  'status = "disabled"' in next revision, which can 
be enabled from child dtsi
as part of separate change.

> Brian
> 
> [1] See:
> https://elinux.org/Device_Tree_Usage#Node_Names
> https://elinux.org/images/c/cf/Power_ePAPR_APPROVED_v1.1.pdf
> 
>> +			compatible = "qcom,wcn3990-wifi";
>> +			reg = <0x18800000 0x800000>;
>> +			reg-names = "membase";
>> +			memory-region = <&wlan_msa_mem>;
>> +			interrupts =
>> +				<0 413 0 /* CE0 */ >,
>> +				<0 414 0 /* CE1 */ >,
>> +				<0 415 0 /* CE2 */ >,
>> +				<0 416 0 /* CE3 */ >,
>> +				<0 417 0 /* CE4 */ >,
>> +				<0 418 0 /* CE5 */ >,
>> +				<0 420 0 /* CE6 */ >,
>> +				<0 421 0 /* CE7 */ >,
>> +				<0 422 0 /* CE8 */ >,
>> +				<0 423 0 /* CE9 */ >,
>> +				<0 424 0 /* CE10 */ >,
>> +				<0 425 0 /* CE11 */ >;
>> +		};
>>  	};
>>  };
>> --
>> 2.17.0
>> 

Thanks,
Govind

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k