* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-06-27 10:22 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-06-27 10:22 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 06-27-2005 12:22 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-06-28 10:02 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-06-28 10:02 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 06-28-2005 12:02 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
shensche - 06-28-05 12:02
----------------------------------------------------------------------
- added several files from /proc/asound
- BIOS is the latest 1.16 and VIA does not seem to offer older version
- it seems that a current Windows up to 1 GB is only possible with Windows
CE, so i cannot test with it.
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-06-28 18:19 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-06-28 18:19 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 06-28-2005 20:19 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
shensche - 06-28-05 12:02
----------------------------------------------------------------------
- added several files from /proc/asound
- BIOS is the latest 1.16 and VIA does not seem to offer older version
- it seems that a current Windows up to 1 GB is only possible with Windows
CE, so i cannot test with it.
----------------------------------------------------------------------
shensche - 06-28-05 20:19
----------------------------------------------------------------------
i just tried with the same hard disk (aka flash disk) on another quite
similar system with the mainboard EPIA MII. it contains AFAIK the same
southbridge (VT8235) and according to lspci, it is the same sound chip.
but there it works!
before i start uploading all the relevant files from the 2nd, working,
system, i wonder if this is necessary for you.
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-06-29 18:16 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-06-29 18:16 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 06-29-2005 20:16 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
shensche - 06-28-05 20:19
----------------------------------------------------------------------
i just tried with the same hard disk (aka flash disk) on another quite
similar system with the mainboard EPIA MII. it contains AFAIK the same
southbridge (VT8235) and according to lspci, it is the same sound chip.
but there it works!
before i start uploading all the relevant files from the 2nd, working,
system, i wonder if this is necessary for you.
----------------------------------------------------------------------
tiwai - 06-29-05 20:16
----------------------------------------------------------------------
The message "analog subsections not ready" itself isn't always critical.
For example, I got this with my audigy1 but it worked...
BTW, if possible, please try ALSA 1.0.8. There are some changes in 1.0.9
wrt DXS support, and this might influence on the behavior.
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-07-01 10:07 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-07-01 10:07 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 07-01-2005 12:07 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
tiwai - 06-29-05 20:16
----------------------------------------------------------------------
The message "analog subsections not ready" itself isn't always critical.
For example, I got this with my audigy1 but it worked...
BTW, if possible, please try ALSA 1.0.8. There are some changes in 1.0.9
wrt DXS support, and this might influence on the behavior.
----------------------------------------------------------------------
shensche - 07-01-05 12:07
----------------------------------------------------------------------
- tried with 2.6.12-ck3 (ALSA 1.0.9rc2): no success
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-07-01 10:11 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-07-01 10:11 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 07-01-2005 12:11 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
shensche - 07-01-05 12:07
----------------------------------------------------------------------
- tried with 2.6.12-ck3 (ALSA 1.0.9rc2): no success
----------------------------------------------------------------------
shensche - 07-01-05 12:11
----------------------------------------------------------------------
- tried again with ALSA 1.0.8 (shipped with 2.6.11), all 4 VIA DXS channels
are at maximum. tried with module option dxs_support from 0 to 4: no
success.
- i recompiled 1.0.9 with debug support. any more info i can provide?
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
07-01-05 12:11 shensche Note Added: 0005330
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-07-07 17:07 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-07-07 17:07 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 07-07-2005 19:07 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
shensche - 07-01-05 12:11
----------------------------------------------------------------------
- tried again with ALSA 1.0.8 (shipped with 2.6.11), all 4 VIA DXS channels
are at maximum. tried with module option dxs_support from 0 to 4: no
success.
- i recompiled 1.0.9 with debug support. any more info i can provide?
----------------------------------------------------------------------
shensche - 07-07-05 19:07
----------------------------------------------------------------------
ok, since nothing happened in the meantime: how likely is a faulty
hardware? be it the chip, the sockets or the wiring of the sockets?
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
07-01-05 12:11 shensche Note Added: 0005330
07-07-05 19:07 shensche Note Added: 0005401
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-07-08 9:46 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-07-08 9:46 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 07-08-2005 11:46 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
shensche - 07-07-05 19:07
----------------------------------------------------------------------
ok, since nothing happened in the meantime: how likely is a faulty
hardware? be it the chip, the sockets or the wiring of the sockets?
----------------------------------------------------------------------
tiwai - 07-08-05 11:46
----------------------------------------------------------------------
I don't think it's a chip bug.
Any chance to try another machine with the same model?
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
07-01-05 12:11 shensche Note Added: 0005330
07-07-05 19:07 shensche Note Added: 0005401
07-08-05 11:46 tiwai Note Added: 0005408
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP,
AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-07-08 10:34 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-07-08 10:34 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 07-08-2005 12:34 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
tiwai - 07-08-05 11:46
----------------------------------------------------------------------
I don't think it's a chip bug.
Any chance to try another machine with the same model?
----------------------------------------------------------------------
shensche - 07-08-05 12:34
----------------------------------------------------------------------
well, we actually ordered a second machine together with the first one,
slightly differently configured for the use in a car. unfortunately, the
second one has an EPIA-MII, not an EPIA-M. there the sound works. i
already tried the "hard" disk from the working system in the non-working,
but to no avail.
the problem with shipping another one is that i am here in Mali: that
means shipping is very expensive and very slow. the first client (a radio
station in the Sahara) will be equipped with the machine in approx. 2
weeks and it is crucial to them that the sound works.
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
07-01-05 12:11 shensche Note Added: 0005330
07-07-05 19:07 shensche Note Added: 0005401
07-08-05 11:46 tiwai Note Added: 0005408
07-08-05 12:34 shensche Note Added: 0005419
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP,
AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2005-07-21 15:29 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2005-07-21 15:29 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 07-21-2005 17:29 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
shensche - 07-08-05 12:34
----------------------------------------------------------------------
well, we actually ordered a second machine together with the first one,
slightly differently configured for the use in a car. unfortunately, the
second one has an EPIA-MII, not an EPIA-M. there the sound works. i
already tried the "hard" disk from the working system in the non-working,
but to no avail.
the problem with shipping another one is that i am here in Mali: that
means shipping is very expensive and very slow. the first client (a radio
station in the Sahara) will be equipped with the machine in approx. 2
weeks and it is crucial to them that the sound works.
----------------------------------------------------------------------
shensche - 07-21-05 17:29
----------------------------------------------------------------------
nazdar!
ok, the manufacture and i concluded to consider it as faulty hardware. the
machine will be sent back. unfortunately, getting the new mainboard will
take a lot of time and i fear, i will be gone when it will arrive here. i
will let you know if anything will happen.
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
07-01-05 12:11 shensche Note Added: 0005330
07-07-05 19:07 shensche Note Added: 0005401
07-08-05 11:46 tiwai Note Added: 0005408
07-08-05 12:34 shensche Note Added: 0005419
07-21-05 17:29 shensche Note Added: 0005539
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2006-06-02 7:52 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2006-06-02 7:52 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 06-02-2006 09:52 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
shensche - 07-21-05 17:29
----------------------------------------------------------------------
nazdar!
ok, the manufacture and i concluded to consider it as faulty hardware. the
machine will be sent back. unfortunately, getting the new mainboard will
take a lot of time and i fear, i will be gone when it will arrive here. i
will let you know if anything will happen.
----------------------------------------------------------------------
wouter - 06-02-06 09:52
----------------------------------------------------------------------
I have a Via Epia M-10000, I can't get the sound working either. I've been
trying remote (!) for almost a year already (the machine itself is in
Kuopio, Finland; I'm in Brussels, Belgium at the moment).
lspci:
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
relevant dmesg output:
ALSA sound/pci/ac97/ac97_codec.c:1996: AC'97 0 analog subsections not
ready
ALSA sound/core/pcm_lib.c:2537: capture read error (DMA or IRQ trouble?)
ALSA sound/core/pcm_lib.c:2537: capture read error (DMA or IRQ trouble?)
ALSA sound/core/pcm_lib.c:2537: capture read error (DMA or IRQ trouble?)
[...]
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
07-01-05 12:11 shensche Note Added: 0005330
07-07-05 19:07 shensche Note Added: 0005401
07-08-05 11:46 tiwai Note Added: 0005408
07-08-05 12:34 shensche Note Added: 0005419
07-21-05 17:29 shensche Note Added: 0005539
06-02-06 09:52 wouter Note Added: 0010046
======================================================================
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2006-06-03 13:50 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2006-06-03 13:50 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 06-03-2006 15:50 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
wouter - 06-02-06 09:52
----------------------------------------------------------------------
I have a Via Epia M-10000, I can't get the sound working either. I've been
trying remote (!) for almost a year already (the machine itself is in
Kuopio, Finland; I'm in Brussels, Belgium at the moment).
lspci:
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
relevant dmesg output:
ALSA sound/pci/ac97/ac97_codec.c:1996: AC'97 0 analog subsections not
ready
ALSA sound/core/pcm_lib.c:2537: capture read error (DMA or IRQ trouble?)
ALSA sound/core/pcm_lib.c:2537: capture read error (DMA or IRQ trouble?)
ALSA sound/core/pcm_lib.c:2537: capture read error (DMA or IRQ trouble?)
[...]
----------------------------------------------------------------------
picobyte - 06-03-06 15:50
----------------------------------------------------------------------
I have a via 8235 also, not working. It used to work and somewhere in
kernel upgrades and/or alsa upgrades it stopped working. I succesfully had
it once in alsa 1.0.9b with an early 2.6 kernel (I am not sure which one
exactly since I did a kernel upgrade quite often, but I think it worked
from 2.6.0-2.6.10).
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
07-01-05 12:11 shensche Note Added: 0005330
07-07-05 19:07 shensche Note Added: 0005401
07-08-05 11:46 tiwai Note Added: 0005408
07-08-05 12:34 shensche Note Added: 0005419
07-21-05 17:29 shensche Note Added: 0005539
06-02-06 09:52 wouter Note Added: 0010046
06-03-06 15:50 picobyte Note Added: 0010061
======================================================================
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound
@ 2006-07-17 14:01 bugtrack
0 siblings, 0 replies; 13+ messages in thread
From: bugtrack @ 2006-07-17 14:01 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1213>
======================================================================
Reported By: shensche
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1213
Category: PCI - via82xx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian (derived Knoppix->Morphix->Kunnafonix)
Kernel Version: 2.6.11.12, but also many other 2.4 and 2.6 kernels
======================================================================
Date Submitted: 06-27-2005 12:22 CEST
Last Modified: 07-17-2006 16:01 CEST
======================================================================
Summary: snd-via82xx on EPIA-M - 0 analog subsections not
ready: no sound
Description:
i am working on a machine with an EPIA-M mainboard and the ICEensemble
VT1616i sound chip (see attached lspci -v). unfortunately, i cannot hear
any sound from it. it is always the same: the mixer settings seem ok,
the applications play happily the files, but i cannot hear a thing. the
speakers are ok, too.
the system is running kernel 2.6.11 with the kernel patches from Con
Kolivas (-ck10) and ALSA. i also tried OSS (not the emu) on that kernel.
i tried 2.4 kernels with Damn Small Linux and Knoppix 3.7 and 2.6.9
=66rom Knoppix 3.7 and a custom 2.6.10-ck6.
since ALSA 1.0.8 did not work, i installed 1.0.9b, including the libs
and utils. during that upgrade, the mixer lost the possibility to change
the DXS-settings. has this to do with the whitelist, introduced
recently?
i played around with lots of combinations of the options ac97_quirk and
dxs_support when loading the kernel module.
on the hardware side i disabled the front panel sockets for line-out and
mic-in, just to be sure. and i often tried all three sockets for=20
line-out, line-in and mic-in in the back to hear the output.
the chip seems to share interrupt 10 with USB, so i unloaded uhci-hcd,
but to no avail. i also dis-/enabled ACPI, reserved IRQ for non-PCI (now
USB and sound share interrupt 5) in the BIOS. the BIOS was told that
there was a/no PlugNPlay OS and the MC97 modem is disabled.
the machine does not seem to have an APIC.
i muted some IEC 958 settings in the mixer as read somewhere in the net,
but that did not help either. and one of these settings always
reenables itself as soon as i try to play a wav with aplay.
i modified alsa-kernel/pci/ac97/ac97_codec.c to goto __ready_ok also
when "0 analog subsections are ready" (weird message, btw) before line
1960. another try was to increase the end_time in line 1953 by factor
10. both did not yield a successful result, both being a shot in the
blue.
i attached /etc/asound.state (after saving with alsactl store) and the
output of dmesg. do not mind the oops from cowloop, i guess it is not
important, because all the other kernels do not work as well.
i read=20
http://alsa-project.org/alsa-doc/doc-php/template.php?company=3DVIA&card=3D=
=2E&chip=3DVIA82C686%2C+VIA8233%2C+VIA8233A%2C+VIA8235&module=3Dvia82xx
alsa-kernel/Documentation/ALSA-Configuration.txt
and many other forum entries
but still something is going wrong. why are 0 analog subdevices ready?
how to make them ready? where to wait? what to initialise?
i will try to upgrade the BIOS, soon and try with MS Windows (if i manage
to fit it onto 1 GB)
======================================================================
----------------------------------------------------------------------
picobyte - 06-03-06 15:50
----------------------------------------------------------------------
I have a via 8235 also, not working. It used to work and somewhere in
kernel upgrades and/or alsa upgrades it stopped working. I succesfully had
it once in alsa 1.0.9b with an early 2.6 kernel (I am not sure which one
exactly since I did a kernel upgrade quite often, but I think it worked
from 2.6.0-2.6.10).
----------------------------------------------------------------------
wouter - 07-17-06 16:01
----------------------------------------------------------------------
Kernel 2.6.17.5 on VIA Epia M10000 (Nehemiah), still no sound whatsoever.
dmesg output:
ALSA sound/pci/ac97/ac97_codec.c:1972: AC'97 0 analog subsections not
ready
ALSA sound/usb/usbaudio.c:2689: 2:2:1: add audio endpoint 0x83
ALSA sound/usb/usbmixer.c:945: [2] FU [Mic Capture Switch] ch = 1, val =
0/1/1
ALSA sound/usb/usbmixer.c:388: cannot set ctl value: req = 0x4, wValue =
0x200, wIndex = 0x201, type = 4, data = 0x80/0x0
ALSA sound/usb/usbmixer.c:945: [2] FU [Mic Capture Volume] ch = 1, val =
-14080/0/256
ALSA sound/usb/usbmixer.c:945: [2] FU [Auto Gain Control] ch = 1, val =
0/1/1
usbcore: registered new driver snd-usb-audio
ALSA device list:
#0: VIA 8235 with VT1616i at 0xe400, irq 10
#1: Camera at usb-0000:00:10.0-2, full speed
The only way you can get any indication that the headphones are working,
is to toggle the "External Amplifier" switch -- you hear a very vague
click. Anything else, be it playing mp3s or wavs, toggling switches, using
different mixer settings or trying any physical audio in- and output,
doesn't lead anywhere.
This board is effectively mute.
Issue History
Date Modified Username Field Change
======================================================================
06-27-05 12:22 shensche New Issue
06-27-05 12:22 shensche File Added: asound.conf
06-27-05 12:22 shensche Distribution => Debian (derived
Knoppix->Morphix->Kunnafonix)
06-27-05 12:22 shensche Kernel Version => 2.6.11.12, but also
many other 2.4 and 2.6 kernels
06-27-05 12:23 shensche File Added: asound.state
06-27-05 12:27 shensche File Added: dmesg.full
06-27-05 12:27 shensche File Added: dmesg.oss
06-27-05 12:28 shensche File Added: lspci
06-27-05 12:29 shensche Issue Monitored: shensche
06-27-05 12:36 shensche Issue End Monitor: shensche
06-28-05 11:31 shensche File Added: proc_asound_card0_codec97#_ac97#0-0
06-28-05 11:32 shensche File Added:
proc_asound_card0_codec97#_ac97#0-0+regs
06-28-05 11:32 shensche File Added: proc_asound_card0_via82xx
06-28-05 11:32 shensche File Added: proc_asound_cards
06-28-05 11:33 shensche File Added: proc_asound_version
06-28-05 12:02 shensche Note Added: 0005296
06-28-05 20:19 shensche Note Added: 0005300
06-29-05 20:16 tiwai Note Added: 0005310
07-01-05 12:07 shensche Note Added: 0005329
07-01-05 12:11 shensche Note Added: 0005330
07-07-05 19:07 shensche Note Added: 0005401
07-08-05 11:46 tiwai Note Added: 0005408
07-08-05 12:34 shensche Note Added: 0005419
07-21-05 17:29 shensche Note Added: 0005539
06-02-06 09:52 wouter Note Added: 0010046
06-03-06 15:50 picobyte Note Added: 0010061
07-17-06 16:01 wouter Note Added: 0011041
======================================================================
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2006-07-17 14:01 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-06-27 10:22 [ALSA - driver 0001213]: snd-via82xx on EPIA-M - 0 analog subsections not ready: no sound bugtrack
-- strict thread matches above, loose matches on Subject: below --
2005-06-28 10:02 bugtrack
2005-06-28 18:19 bugtrack
2005-06-29 18:16 bugtrack
2005-07-01 10:07 bugtrack
2005-07-01 10:11 bugtrack
2005-07-07 17:07 bugtrack
2005-07-08 9:46 bugtrack
2005-07-08 10:34 bugtrack
2005-07-21 15:29 bugtrack
2006-06-02 7:52 bugtrack
2006-06-03 13:50 bugtrack
2006-07-17 14:01 bugtrack
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.