All of lore.kernel.org
 help / color / mirror / Atom feed
* RTL8822bu as AP rejects Tapo devices
@ 2024-01-04  9:12 Nicola Mingotti
  2024-01-04  9:35 ` Ping-Ke Shih
  0 siblings, 1 reply; 2+ messages in thread
From: Nicola Mingotti @ 2024-01-04  9:12 UTC (permalink / raw)
  To: linux-wireless

Hi, i wish to signal what seems to me a bug.

I set up a few Linux boxes as AP in our office using Brostrend AC1200
dongles (chipset RTL8822BU).

Using the external module RTL882xbu suggested by Brostrend it all
works but there is one issue, i can't put more than one dongle for
each Linux box. I contacted Brostrend and I was told to wait for the
driver to be in the Linux kernel.

I saw that now RTL8822bu is in the kernel 6.5.0-5 which for me is
accessible without risk of wasting the AP configuration upgrading the
OS from Debian Stable to Debian Testing. I upgraded.

In the AP which runs now Debian Testing it is true i can plug in two
Brostrend dongles. It works as AP 2.4Ghz, in the sense that i can
connect to it with my Samsung phone. BUT, here comes the problem, NO
ONE of the >10 Tapo devices (2 cameras C225 and several plugs P110)
want to connects to the AP with the driver provided by the kernel.

I installed the RTL882xbu module in the same Debian Testing AP and now
all the Tapo devices do connect.

bye
n.m.

^ permalink raw reply	[flat|nested] 2+ messages in thread

* RE: RTL8822bu as AP rejects Tapo devices
  2024-01-04  9:12 RTL8822bu as AP rejects Tapo devices Nicola Mingotti
@ 2024-01-04  9:35 ` Ping-Ke Shih
  0 siblings, 0 replies; 2+ messages in thread
From: Ping-Ke Shih @ 2024-01-04  9:35 UTC (permalink / raw)
  To: Nicola Mingotti, linux-wireless@vger.kernel.org



> -----Original Message-----
> From: Nicola Mingotti <nico020978@gmail.com>
> Sent: Thursday, January 4, 2024 5:13 PM
> To: linux-wireless@vger.kernel.org
> Subject: RTL8822bu as AP rejects Tapo devices
> 
> 
> In the AP which runs now Debian Testing it is true i can plug in two
> Brostrend dongles. It works as AP 2.4Ghz, in the sense that i can
> connect to it with my Samsung phone. BUT, here comes the problem, NO
> ONE of the >10 Tapo devices (2 cameras C225 and several plugs P110)
> want to connects to the AP with the driver provided by the kernel.
> 

Capturing air sniffer would help to diagnose the problem. 
Assuming wlan0 is your RTL8822bu, add a monitor interface by 
  $ sudo iw dev wlan0 interface add mon0 type monitor

Use wireshark to records packets of mon0 during Tapo device is trying to
connect. 

Do you try to use non-secure connection? It can help to bisect problem too.

Ping-Ke


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2024-01-04  9:35 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-04  9:12 RTL8822bu as AP rejects Tapo devices Nicola Mingotti
2024-01-04  9:35 ` Ping-Ke Shih

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.