All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Biao Huang <biao.huang@mediatek.com>,
	Andrew Lunn <andrew@lunn.ch>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Richard Cochran <richardcochran@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	macpaul.lin@mediatek.com, netdev@vger.kernel.org
Subject: Re: [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller
Date: Thu, 19 Jan 2023 19:19:54 +0100	[thread overview]
Message-ID: <d580f1dc-e49f-48c9-30be-a0ef25ad1435@gmail.com> (raw)
In-Reply-To: <20230105010712.10116-3-biao.huang@mediatek.com>



On 05/01/2023 02:07, Biao Huang wrote:
> Add Ethernet controller node for mt8195.
> 
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Biao Huang <biao.huang@mediatek.com>

Applied, thanks!

> ---
>   arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 77 ++++++++++++++++
>   arch/arm64/boot/dts/mediatek/mt8195.dtsi     | 92 ++++++++++++++++++++
>   2 files changed, 169 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> index 4fbd99eb496a..6a48c135f0da 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> @@ -78,6 +78,23 @@ optee_reserved: optee@43200000 {
>   	};
>   };
>   
> +&eth {
> +	phy-mode ="rgmii-id";
> +	phy-handle = <&ethernet_phy0>;
> +	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
> +	snps,reset-delays-us = <0 10000 80000>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&eth_default_pins>;
> +	pinctrl-1 = <&eth_sleep_pins>;
> +	status = "okay";
> +
> +	mdio {
> +		ethernet_phy0: ethernet-phy@1 {
> +			reg = <0x1>;
> +		};
> +	};
> +};
> +
>   &i2c6 {
>   	clock-frequency = <400000>;
>   	pinctrl-0 = <&i2c6_pins>;
> @@ -258,6 +275,66 @@ &mt6359_vsram_others_ldo_reg {
>   };
>   
>   &pio {
> +	eth_default_pins: eth-default-pins {
> +		pins-txd {
> +			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
> +				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
> +				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
> +				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +		};
> +		pins-cc {
> +			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
> +				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
> +				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
> +				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +		};
> +		pins-rxd {
> +			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
> +				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
> +				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
> +				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
> +		};
> +		pins-mdio {
> +			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
> +				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
> +			input-enable;
> +		};
> +		pins-power {
> +			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
> +				 <PINMUX_GPIO92__FUNC_GPIO92>;
> +			output-high;
> +		};
> +	};
> +
> +	eth_sleep_pins: eth-sleep-pins {
> +		pins-txd {
> +			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
> +				 <PINMUX_GPIO78__FUNC_GPIO78>,
> +				 <PINMUX_GPIO79__FUNC_GPIO79>,
> +				 <PINMUX_GPIO80__FUNC_GPIO80>;
> +		};
> +		pins-cc {
> +			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
> +				 <PINMUX_GPIO88__FUNC_GPIO88>,
> +				 <PINMUX_GPIO87__FUNC_GPIO87>,
> +				 <PINMUX_GPIO86__FUNC_GPIO86>;
> +		};
> +		pins-rxd {
> +			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
> +				 <PINMUX_GPIO82__FUNC_GPIO82>,
> +				 <PINMUX_GPIO83__FUNC_GPIO83>,
> +				 <PINMUX_GPIO84__FUNC_GPIO84>;
> +		};
> +		pins-mdio {
> +			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
> +				 <PINMUX_GPIO90__FUNC_GPIO90>;
> +			input-disable;
> +			bias-disable;
> +		};
> +	};
> +
>   	gpio_keys_pins: gpio-keys-pins {
>   		pins {
>   			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 5d31536f4c48..28b3ebd145bf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1046,6 +1046,98 @@ spis1: spi@1101e000 {
>   			status = "disabled";
>   		};
>   
> +		eth: ethernet@11021000 {
> +			compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a";
> +			reg = <0 0x11021000 0 0x4000>;
> +			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
> +			interrupt-names = "macirq";
> +			clock-names = "axi",
> +				      "apb",
> +				      "mac_main",
> +				      "ptp_ref",
> +				      "rmii_internal",
> +				      "mac_cg";
> +			clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
> +				 <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_250M>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>,
> +				 <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
> +			assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
> +					  <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
> +					  <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
> +						 <&topckgen CLK_TOP_ETHPLL_D8>,
> +						 <&topckgen CLK_TOP_ETHPLL_D10>;
> +			power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>;
> +			mediatek,pericfg = <&infracfg_ao>;
> +			snps,axi-config = <&stmmac_axi_setup>;
> +			snps,mtl-rx-config = <&mtl_rx_setup>;
> +			snps,mtl-tx-config = <&mtl_tx_setup>;
> +			snps,txpbl = <16>;
> +			snps,rxpbl = <16>;
> +			snps,clk-csr = <0>;
> +			status = "disabled";
> +
> +			mdio {
> +				compatible = "snps,dwmac-mdio";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +
> +			stmmac_axi_setup: stmmac-axi-config {
> +				snps,wr_osr_lmt = <0x7>;
> +				snps,rd_osr_lmt = <0x7>;
> +				snps,blen = <0 0 0 0 16 8 4>;
> +			};
> +
> +			mtl_rx_setup: rx-queues-config {
> +				snps,rx-queues-to-use = <4>;
> +				snps,rx-sched-sp;
> +				queue0 {
> +					snps,dcb-algorithm;
> +					snps,map-to-dma-channel = <0x0>;
> +				};
> +				queue1 {
> +					snps,dcb-algorithm;
> +					snps,map-to-dma-channel = <0x0>;
> +				};
> +				queue2 {
> +					snps,dcb-algorithm;
> +					snps,map-to-dma-channel = <0x0>;
> +				};
> +				queue3 {
> +					snps,dcb-algorithm;
> +					snps,map-to-dma-channel = <0x0>;
> +				};
> +			};
> +
> +			mtl_tx_setup: tx-queues-config {
> +				snps,tx-queues-to-use = <4>;
> +				snps,tx-sched-wrr;
> +				queue0 {
> +					snps,weight = <0x10>;
> +					snps,dcb-algorithm;
> +					snps,priority = <0x0>;
> +				};
> +				queue1 {
> +					snps,weight = <0x11>;
> +					snps,dcb-algorithm;
> +					snps,priority = <0x1>;
> +				};
> +				queue2 {
> +					snps,weight = <0x12>;
> +					snps,dcb-algorithm;
> +					snps,priority = <0x2>;
> +				};
> +				queue3 {
> +					snps,weight = <0x13>;
> +					snps,dcb-algorithm;
> +					snps,priority = <0x3>;
> +				};
> +			};
> +		};
> +
>   		xhci0: usb@11200000 {
>   			compatible = "mediatek,mt8195-xhci",
>   				     "mediatek,mtk-xhci";


WARNING: multiple messages have this Message-ID (diff)
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Biao Huang <biao.huang@mediatek.com>,
	Andrew Lunn <andrew@lunn.ch>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Richard Cochran <richardcochran@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	macpaul.lin@mediatek.com, netdev@vger.kernel.org
Subject: Re: [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller
Date: Thu, 19 Jan 2023 19:19:54 +0100	[thread overview]
Message-ID: <d580f1dc-e49f-48c9-30be-a0ef25ad1435@gmail.com> (raw)
In-Reply-To: <20230105010712.10116-3-biao.huang@mediatek.com>



On 05/01/2023 02:07, Biao Huang wrote:
> Add Ethernet controller node for mt8195.
> 
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Biao Huang <biao.huang@mediatek.com>

Applied, thanks!

> ---
>   arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 77 ++++++++++++++++
>   arch/arm64/boot/dts/mediatek/mt8195.dtsi     | 92 ++++++++++++++++++++
>   2 files changed, 169 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> index 4fbd99eb496a..6a48c135f0da 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> @@ -78,6 +78,23 @@ optee_reserved: optee@43200000 {
>   	};
>   };
>   
> +&eth {
> +	phy-mode ="rgmii-id";
> +	phy-handle = <&ethernet_phy0>;
> +	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
> +	snps,reset-delays-us = <0 10000 80000>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&eth_default_pins>;
> +	pinctrl-1 = <&eth_sleep_pins>;
> +	status = "okay";
> +
> +	mdio {
> +		ethernet_phy0: ethernet-phy@1 {
> +			reg = <0x1>;
> +		};
> +	};
> +};
> +
>   &i2c6 {
>   	clock-frequency = <400000>;
>   	pinctrl-0 = <&i2c6_pins>;
> @@ -258,6 +275,66 @@ &mt6359_vsram_others_ldo_reg {
>   };
>   
>   &pio {
> +	eth_default_pins: eth-default-pins {
> +		pins-txd {
> +			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
> +				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
> +				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
> +				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +		};
> +		pins-cc {
> +			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
> +				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
> +				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
> +				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +		};
> +		pins-rxd {
> +			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
> +				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
> +				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
> +				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
> +		};
> +		pins-mdio {
> +			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
> +				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
> +			input-enable;
> +		};
> +		pins-power {
> +			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
> +				 <PINMUX_GPIO92__FUNC_GPIO92>;
> +			output-high;
> +		};
> +	};
> +
> +	eth_sleep_pins: eth-sleep-pins {
> +		pins-txd {
> +			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
> +				 <PINMUX_GPIO78__FUNC_GPIO78>,
> +				 <PINMUX_GPIO79__FUNC_GPIO79>,
> +				 <PINMUX_GPIO80__FUNC_GPIO80>;
> +		};
> +		pins-cc {
> +			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
> +				 <PINMUX_GPIO88__FUNC_GPIO88>,
> +				 <PINMUX_GPIO87__FUNC_GPIO87>,
> +				 <PINMUX_GPIO86__FUNC_GPIO86>;
> +		};
> +		pins-rxd {
> +			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
> +				 <PINMUX_GPIO82__FUNC_GPIO82>,
> +				 <PINMUX_GPIO83__FUNC_GPIO83>,
> +				 <PINMUX_GPIO84__FUNC_GPIO84>;
> +		};
> +		pins-mdio {
> +			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
> +				 <PINMUX_GPIO90__FUNC_GPIO90>;
> +			input-disable;
> +			bias-disable;
> +		};
> +	};
> +
>   	gpio_keys_pins: gpio-keys-pins {
>   		pins {
>   			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 5d31536f4c48..28b3ebd145bf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1046,6 +1046,98 @@ spis1: spi@1101e000 {
>   			status = "disabled";
>   		};
>   
> +		eth: ethernet@11021000 {
> +			compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a";
> +			reg = <0 0x11021000 0 0x4000>;
> +			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
> +			interrupt-names = "macirq";
> +			clock-names = "axi",
> +				      "apb",
> +				      "mac_main",
> +				      "ptp_ref",
> +				      "rmii_internal",
> +				      "mac_cg";
> +			clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
> +				 <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_250M>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>,
> +				 <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
> +			assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
> +					  <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
> +					  <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
> +						 <&topckgen CLK_TOP_ETHPLL_D8>,
> +						 <&topckgen CLK_TOP_ETHPLL_D10>;
> +			power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>;
> +			mediatek,pericfg = <&infracfg_ao>;
> +			snps,axi-config = <&stmmac_axi_setup>;
> +			snps,mtl-rx-config = <&mtl_rx_setup>;
> +			snps,mtl-tx-config = <&mtl_tx_setup>;
> +			snps,txpbl = <16>;
> +			snps,rxpbl = <16>;
> +			snps,clk-csr = <0>;
> +			status = "disabled";
> +
> +			mdio {
> +				compatible = "snps,dwmac-mdio";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +
> +			stmmac_axi_setup: stmmac-axi-config {
> +				snps,wr_osr_lmt = <0x7>;
> +				snps,rd_osr_lmt = <0x7>;
> +				snps,blen = <0 0 0 0 16 8 4>;
> +			};
> +
> +			mtl_rx_setup: rx-queues-config {
> +				snps,rx-queues-to-use = <4>;
> +				snps,rx-sched-sp;
> +				queue0 {
> +					snps,dcb-algorithm;
> +					snps,map-to-dma-channel = <0x0>;
> +				};
> +				queue1 {
> +					snps,dcb-algorithm;
> +					snps,map-to-dma-channel = <0x0>;
> +				};
> +				queue2 {
> +					snps,dcb-algorithm;
> +					snps,map-to-dma-channel = <0x0>;
> +				};
> +				queue3 {
> +					snps,dcb-algorithm;
> +					snps,map-to-dma-channel = <0x0>;
> +				};
> +			};
> +
> +			mtl_tx_setup: tx-queues-config {
> +				snps,tx-queues-to-use = <4>;
> +				snps,tx-sched-wrr;
> +				queue0 {
> +					snps,weight = <0x10>;
> +					snps,dcb-algorithm;
> +					snps,priority = <0x0>;
> +				};
> +				queue1 {
> +					snps,weight = <0x11>;
> +					snps,dcb-algorithm;
> +					snps,priority = <0x1>;
> +				};
> +				queue2 {
> +					snps,weight = <0x12>;
> +					snps,dcb-algorithm;
> +					snps,priority = <0x2>;
> +				};
> +				queue3 {
> +					snps,weight = <0x13>;
> +					snps,dcb-algorithm;
> +					snps,priority = <0x3>;
> +				};
> +			};
> +		};
> +
>   		xhci0: usb@11200000 {
>   			compatible = "mediatek,mt8195-xhci",
>   				     "mediatek,mtk-xhci";

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-01-19 18:20 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-05  1:07 [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang
2023-01-05  1:07 ` Biao Huang
2023-01-05  1:07 ` [PATCH v8 1/2] stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed Biao Huang
2023-01-05  1:07   ` Biao Huang
2023-01-05  1:07 ` [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang
2023-01-05  1:07   ` Biao Huang
2023-01-19 18:19   ` Matthias Brugger [this message]
2023-01-19 18:19     ` Matthias Brugger
2023-01-06  4:58 ` [PATCH v8 0/2] " Jakub Kicinski
2023-01-06  4:58   ` Jakub Kicinski
2023-01-11  5:49   ` Biao Huang (黄彪)
2023-01-11  5:49     ` Biao Huang (黄彪)
2023-01-06  5:10 ` patchwork-bot+netdevbpf
2023-01-06  5:10   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d580f1dc-e49f-48c9-30be-a0ef25ad1435@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew@lunn.ch \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=biao.huang@mediatek.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=macpaul.lin@mediatek.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.